Knowing installed support package version of Compliance Calibrator ??

Hi all,
We have Compliance Calibrator 5.1 in WAS 7.0, and we would want to know the installed support package... How to know ?
in CC, when clicking on "About" we just have the CC version ("5.1").
On the J2EE server System Information for the component ccappcomp, we just have "null (0.2007.03.09.15.22.41)".
It looks like SP3 but how to be sure ?
Thanks in advance...

Vincent,
I believe that you can get this information in the NetWeaver Software Deployment Manager (SDM). If I remember correctly the AE/CC packages are deployed using this tool. SDM has version information for all J2EE deployed software packages.
You can find the SDM under /usr/sap/<SID>/DVEBMGS00/SDM (for Unix systems).
Best of luck.
Matthew

Similar Messages

There's any way of knowing what Support Package we had implemented?

Hi!
I need to know if exists a kind of "history" of the system. I mean, a trx that shows you when you implemented X support package and when.
My problem is that I need to implement some oss notes to a z program that is a copy of an standard. The z program was created (copied) some years ago.
I need to know the Support Package that we had at that time because I need to check if the prerequisites applies to the Z version.
I you don't understand what I need, please tell me...
Thanks in advance!
Bet

If you got the <b>SNOTE</b> transaction, you don't need to care about support packages -;)
Just pass the OSS note and the system is going to tell you if it can be implemented -:D
Greetings,
Blag.

Installing support package 16, 17 and 18 for Netwever 7.0 (ECC 6 EHP 3 )

Hi I just want to know if we can directly load SP for Netweaver 7.00. I just went through some doc but they said we can upload SP directyl from SPAM tcode. can we install it from SPAM tcode i have component SAP_BASIS SP 16, 17 and 18. i downloaded SP using Solution manager i am at implementation phase in the same. i am bit confused should i proceed with SPAM ( but i tried upload package option is greyed out there).
any suggestion will be appreciated.
Mani

Hi Mani,
Follow this,
http://help.sap.com/saphelp_nw70/helpdata/EN/a7/a7a932845c11d2b421006094b9ea64/frameset.htm
- 000 client
- modifiable status of client.
- don't use DDIC/SAP*, use a user with full authorization
Question on Appying NW Support Package Stack
Please note that both individual Support Packages and SP Stacks are Non-cumulative. This means that, when you import Support Packages, then you import a gap less series of Support Packages and, if
you use SP Stacks, you also import these without a gap. The only exception is the Support Package for SPAM itself. & Java support packages which comes in SCA format.
Uday, Did you try to copy from what I posted?.. the correct procedure would be to direct to the original link.. not CTRLC & CTRLV!
Regards,
Debasis.
Edited by: Debasis Sahoo on Apr 22, 2009 1:04 PM

Pacman - install specific package versions

I'm coming off Gentoo and would like to know how pacman enables me to install a specific version of a package. With gentoo, if I wanted to stick with a certain version I could mask versions I did not want to install. Can I do the same thing with Arch?

@Jason: thanks for the tip, I hadn't thought of that tho I have used the pacman -U command to get yaourt.
SamC wrote:It may also be rolling release, but it seems less focused on having the latest versions. It's goal, not having used it, seems to be a base for building what you need and then leaving it as-is until you want to upgrade.
That's pretty accurate of the state of things if your on the stable branch of the portage tree (x86) (portage is similar to pacman, tho much more complex). If your on unstable (~x86), the experience in regards to package updates is almost identical to Arch.
If you want the latest packages on Gentoo, and still want your system to be highly reliable, the best way of doing that is to use the unstable branch and masking the core packages you don't want to be automatically upgraded, so you can upgrade them when your ready. Examples are parts of the build toolchain, X, kernel, etc.
Once you do that, just like with arch you can upgrade the entire system with one simple command "emerge -av world". This looks very similar to using yaourt to install a package from AUR.
Last edited by I.M.O.G. (2009-10-17 00:12:34)

The customer themes not working after installing support package.

Hi,
In a Web dynpro ABAP aplication that i made in a project, we have a customer theme. We transported the development of a new host that had a higher level of support package, and it has stopped working properly the customer theme. We´ve gone from 7.0 sp 9 to sp 20. Well, when you run the programa WD_THEMES, in the ALV appeared to me not the customer theme. So I exported the standar themes and with Eclipse, I´ve copied and re-created the customer theme by modifying the latter.
Once changed, I try exporting to the test environment and it is here that the level of support package was sp18. I could not import it because the version was not the same.In the development environment was 7.0.19.1 and in the test environment was 7.0.15.1.
The question that comes to me is when we have a customer theme in a environment and upgrade the level of support package, is the version of all themes listed in the program updated or only the standar themes?. If this is so, if we upgrade the level of support package we will have to re-export the standar themes, copy one of theme and go back to redo our theme, right?.
Thanks and hope your answer.

Hi Karthik,
Let me clarify on "Not working"
It showned synchrozation successuffly but no data transfer between client and middleware and vs. For instance, the user never receive any new work orders, or their times never got transfered back to R/3. Even though, there is no error on the client.
It appear that step 1-4 are required otherwise, you get ABAP Runtime error (using ST22):
Runtime Error          CALL_FUNCTION_NOT_FOUND
Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          02/07/2007 08:12:27
After we performed step 1-4 but there were data transfer between client and R/3. The only way to get it working, we had to delete client and re-assign MAM 2.5 back to each users.
No, we didn't apply client patch SP19. We are still using SP16.
As we speak, everything is working because we had to re-assign MAM 2.5 for every users. but I hope we don't have to do this next time we apply another Support Package.
Thanks.
Dai Ly

Download/Install Support Package

Hi,
I have a basic question about Support Package. Do I have to be either SAP partner or customer to download Support Package? Thanks,
Lydia

Hi Lydia,
Yes, you have to be a customer to download the support packages.Actually customers will have accounts.Using this account we can get access keys,download support packages etc.
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

Blocked Object Installing Support Package

Hello,
I am tryng to install suport packages with SPAM and i´ve an object that is bloking the process.
I´ve checked and the order is already released.
I´ve cheked SPAU and its ok.
I´ve checked se03 and unloked the order but when i go to spam again the order is still blocked.
Can You well Me?
Thank You very much

Either of them
1. There is a transport request which has not released.
2. Do the adjust modification from the SPAM.

What version of NWDS to use / NW 7.3 Support Package Version confusion

Hi all,
what is the recomendation for the NWDS version to use. Shall it be equal to the version of the server (in our case it is 7.3SP5) or does the NWDS have its own versioning and one should use always the highest available- at the moment this would be SP7: https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/nw/730/doc/auto_com.sap.netweaver.developerstudio.distribution.complete.extsoa_versions.html.
The current information of the SP versions for NW 7.3 makes it more confusing. The SP-stack schedule says the next SP is No. 7 and will be available in April (the fact that there is already a SP7 NWDS raises the first question)
And in the maintenance guide section of SMP there is a SPS-Guide NW 7.3 SP6:
https://websmp109.sap-ag.de/~sapidb/011000358700001406382011E.PDF
Can somebody shed some light what NWDS version to use and what is the next SP version for NW 7.3?
Thanks
Chris

Hi,
The SP Stack 05 will be followed by SP Stack 07. It is just renumbered from SP Stack 06 and follows the original
planning, It is not recommended to implement SP06 without applying SP Stack 07. And use of NWDS sp07 with
NW 7.3 sp07.is recommended.
Regards,
Vipin

Installing Addon Support package (ST-A/PI)

Hello,
Our Earlywatch report is shouting about needing to upgrade ST-A/PI.
So I've used Maintenance Optimizer to download the package, placed it in EPS/in and un-carred the file.
Then I've then gone to SPAM and tried "Support Package > Load Package > from Application Server"
I've then gone to Display/Define and select component ST-A/PI with the following results:
"No Support Package found for this selection"
I have then tried to Upload from Front End instead of Application Server, with the same results.
I've raised a call with SAP but as usual it's now been 4 days without so much as a change in status so I'm hoping someone on here may have an idea.
Many thanks.

Ok guys, thanks for the replies. I haven't given you enough information.
Let me try fill in some gaps.
The result after I selected Load from App Server is to show me the .PAT file and tell me in the message text that: "OCS file already exists in Inbox. Upload not required"
However, if I select "Display" when "New Support Packages" is selected in SPAM, I see nothing with a note at the bottom stating "No OCS Packages found for this selection"
Maintenance Optimizer seemed to want me to select components I did not want to patch. I had a total of 110 files added to my download basket to download the one file I needed!
That file was titled "Servicetools for other App./Netweaver 04s"
I've already installed the ST-A/PI addon using SAINT. This recommendation is to install Support Package SP02 for ST-A/PI.
The recommendation also appears if I run RTCCTOOL in SA38 as well.
I definitely have the correct permissions to run this and, for the record, I have both the .SAR file and the "uncarred version" sat in EPS/in.
Thanks again.

EHP and Support packages

Hello,
Im going through this document;
Master Guide ; SAP Enhancement Package 5 for SAP ERP 6.0 Powered by SAP NetWeaver
Using SAP Enhancement Package 5 for SAP ERP 6.0 and SAP NetWeaver 7 including Enhancement Package 2
Im having a point to clarify;
SAP enhancement packages have Support Packages of their own that are equivalent to the Support Package versions of the underlying SAP system.
We highly recommend installing the enhancement package in combination with the latest available Support Package stack. This approach reduces installation, modification adjustment, and testing effort. Using this strategy, you can install SAP enhancement packages as a normal maintenance activity together with Support Package stacks.
Whats meant by ;
SAP enhancement packages have Support Packages of their own that are equivalent to the Support Package versions of the underlying SAP system.
We highly recommend installing the enhancement package in combination with the latest available Support Package stack.
Can you help me to clarify this with an example
regards,
Zerandib

Hi,
Let me give you some basic example to make this statement clear.
We should first of all distinguish between the terms upgrade and update.
UPGRADE means from one Major release level to Another Major Release. Eg: R/3 46C to ECC 6.0
UPDATE means it can be either support package for installed components or Enhancement Packages for existing component.
Instead of upgrading the the entire RELEASE SAP has come up with EHP updates. This give you all major new changes without
doing a complete release upgrade. Also Downtime is reduced.
Consider this component
SAP_HR     470     0010     SAPKE47010      R/3 Enterprise 4.7 system
If this is upgraded to EHP 5 then the naming convention becomes
SAP_HR     605     0043     SAPKE60543      ECC 6.0 with EHP 5
Just like how we have support packages for each component. WE have support packs for the enhancement packages too.
More information can be pbtained in the below link
http://service.sap.com/erp-ehp
Refer to this SAP notes for further understanding.
1484460 EHP5 for SAP ERP 6.0 SP Stacks - Release & Information Note
1064635 SAP ERP Enhancement Packages: SP Stacks Release Info Note
1298878 Installation of SAP Enhancement Package 5 on SAP ERP 6.0
774615    Support Package levels of ERP/ECC installations/upgrades
I hope I was able to clarify your questions.
Regards,
Naveen.
Edited by: Naveen Kumar on Feb 29, 2012 10:41 AM

SAP Support Package 8.0

Hi
I know cProjects support package 8.0 is scheduled in April 2007. Has anyone aware of the status whether the support package is released
with regards,
Ramakrishna

Hi Ramakrishna,
the support package 8 is available on the SAP Service Marketplace under http://service.sap.com.
Best regards,
Christoph

Support Package

Hi,
I have got a basic question.
1. I am performing clean installation and let's say the latest support package in the market is 10. Should i need to install support package from 1 - 10 (which would consume lot of time and effort) Or can I directly install Support package level 10.
Points gauranteed please help.
--Ragu

Hi,
Thanks already got answer from another forum. But can you tell me how much time it will take for each support package, say i have got 2GB RAM.
Points gauranteed.
--Ragu

How to find out version, support package, patchlevel of installed j2ee as

Hello all
We have PI 7.11 installed and I'd like to know what the support package and patchlevel of our installed j2ee application server is. We would like to post-install NWDI and need to know which are the right SCA-Files for us to download.
Can anyone tell me where to find this information? I wasn't able to find it (maybe just didn't see it?)
Thanks in advance
Renaud

Thanks Srikanth for your quick reply
But which "help -> about" are you talking about?
nwa? ConfigTool? Management Console? JSPM? SAPGUI Client? Elsewhere?
From SAPGUI-Client I choose System -> Status and click on details button for SAP System data. Here I see:
SAP_ABA     711     0000
SAP_BASIS     711     0000
PI_BASIS     711     0000
ST-PI     2005_1_710     0003
SAP_BW     711     0000
But this is for ABAP stack only.
In nwa I don't see any HELP -> About
In nwa/sysinfo I don't see any HELP -> About
In Config Tool I can see:
Version: 7.1100.20081120163102.0000
-> is this the j2ee as version including support package and patchlevel info or is this the version of the config tool itself?
In JSPM / SDT in Help -> About I can see:
Client Version 1.4.0
Server Version 1.4.0
Server Port 50418
JSPM Service Version 1.0
JSPM Host Name localhost
JSPM Port 50417
Unfortunately not what I'm searching for as well.
In SAP Management Console in ? -> About I can see:
Version: 7110, 21, 15, 51094
Still not sure where to find the required infos... any other ideas?
Kind regards
Renaud

Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.

Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package. How can I fix this?
Thanks
[email protected]

What is your operating system? Reader version?

Trying to install the latest version of iTunes and when it is being installed I get the message "There is a problem with this installer package. A program quired for this install could not be run. Contact your support personel or package vendor."

I am trying to install the latest version of itunes and when the install begins I get the message "There is a problem with this Windows installer package. A program required for this install could not be opened. contact your support personnel or product vendor". I ran a troubleshooting diagnostic on my computer and nothing flagged as a problem. I uninstalled iTunes and tried again and now I don't have any way to sync my ipod touch. Please help with any suggestions!!!

Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.)

Knowing installed support package version of Compliance Calibrator ??

Similar Messages

Maybe you are looking for