Knowledge Check Review Slide for Multiple Knowledge Checks

Hello,
I have created a series of quesiton pools. I have 9 knowledge checks in my project which are randon questions from a quesiton pool.
At the end of each knowledge check, I would like to display a "quiz" results page. When I select that option in Quiz Preferences, it only displays ONE result slide after the FINAL knowledge check.
Is it possible to have a review after each knowledge check?
Your help is greatly appreciated!!!
Susan

Thank you Lilybiri!
So what I want to do is much more simple.
The knowledge checks will not be graded or even reported to an LMS. In short, my course has 3 modules each with 4 lessons. At the end of each lesson, the user answers a few questions about the content. The user MUST answer a question correctly to move on to the next so they will always get 100% on the quiz.
HR would like users to be able to retake each knowledge check. If I create a simple button (retake) which jumps user to the knowledge check start slide, once the user enters the question they have already answered, the answer is "locked down", they cannot chance it or advance forward. Now they are stuck.
I would like to user to be able to either 1) come back into the knowledge check and have their answers wiped out so they are forced to take again. or 2) If the answers cannot be wiped, allow the user to navigate through the answered question slides.
I read your blog and did not find anything that addressed this issue completely. But I did read that the answers are inface "blocked".
Any help would be greatly appreciated!
All the best,
Susan

Similar Messages

  • Standard Report to check consumption values for multiple materials

    Hi,
    Is there any standard report to check "consumption" values for multiple materials? The user needs to check the consumption values over a period of time for multiple materials (VERP, ROH) before deciding the re-order and safety stock values for them. Any help on this will be greatly appreciated.
    Thanks,
    Swapnil

    Dear Swapnil,
    Report MCRE is widely used for the material cosnumption than checking in COOIS.
    Also these reports can help you.
    MCPF                 Material analysis: Dates                
    MCPO                 Material analysis: Quantities           
    MCPW                 Material analysis: Lead time            
    Regards
    Mangalraj.S

  • Reg:Single Check for Multiple Vendors

    Hi Experts,
    I want to Issue a Single check for all vendor open items...
    For this is I created one Group Key and assigned in the vendor master record, but while doing the payment separate check issuing for each vendor,
    any idea

    Hi,
    Can you check the below thread of urs.
    [Reg:Single Check for Multiple Vendors]
    In addition to the above, please make sure that in OBVU, the check box separate payment for each ref is deselected for your questioned comapny code.
    You would have continued your earlier thread instead, rather than a new thread.
    Thanks,
    Srinu

  • How to Maintain Payment with one check for Multiple Vendors?

    Dear Gurus,
    i have a scenario for outgoing payment, here it is
    i have some open items for multiple vendors. say it for open item
    1. with amount 5000 USD for vendor A
    2. wiht amount 10000 USD for vendor B
    my company pay both open item 1 & 2 with one check, say the check no is 27382830 and the amount is 15000 USD. The check is given to the Bank as an order to Pay the vendor. so the check does not have receiver name. i attach a formal letter to the bank to ask them for making payment with that check. the letter contains a detail the amount, vendor bank account number, account holder, and the vendor name.
    so how i can threat this business scenario into SAP? i want to trace check number used to pay the vendors.
    hope you can give some clues. is it possible to maintain scenario above with automatic payment?
    best regards,
    land lord

    Hi,
    Yes you can map this scenario in SAP and use F110 for this. But you will also have to use some Z programs..
    1. For F110 FBZP configuration, maintain outgoing bank clearing Account (this will be a dummy account and not the actual Outgoing Bank Account) as the Bank Sub Account.
    By doing this when you run payment in F110, entry will be
    Vendor A A/c...Dr.
    outgoing bank clearing Account Cr.(1)
    Vendor B A/C... Dr.
    outgoing bank clearing Account Cr.(2)
    2.Then you will have to use Post with clearing transaction codes and make one entry
    outgoing bank clearing Account Cr.(1)..Dr.
    outgoing bank clearing Account Cr.(2)..Dr.
    To Bank Outgoing Account(Actual Bank outgoing Account) Cr.
    3. Now, when you get the single cheque no. from Bank against both the vendors, then thru FB02, change the assignment field/Reference field for Che No. updates.
    But do check BRS also for its reconciliation.. If you do it on a daily basis.. then it would not be difficult.
    Hope this helps you..
    Regards,
    SAPFICO

  • An you tell me how to add an advanced action to the TEB so you can check for multiple lines of input

    an you tell me how to add an advanced action to the TEB so you can check for multiple lines of input? How do you add the advanced action?

    Can you elaborate your requirement?
    If you want to have a text wrapped around and enable a scroller for the same, you can achieve it by TEB properties and check the scroll bar option,
    Is this what you are looking to achieve?
    Thanks,
    Anjaneai

  • Extended Program check for multipl programes in single run

    Hello All,
    I wan to do the syntax check for multiple programs at single execution run.
    SAP has provided SLIN transaction for single program, Is there any SAP standard transaction similar as SLIN for multiple program check at single execution run?
    Thanks,
    Feroz.

    >
    s feroz wrote:
    > I need it in R/34.6b version.
    I don't think you have much option there

  • How to make "check for multiple logons" mandatory in webdynpro application.

    Hi SDN members,
    Im having a problem with an application developed in webdynpro abap.
    We require that  end-user only have a session per computer (ip address),
    I already tried to achieve this by configuring the webdynpro application throguh SICF and going to Error Pages -> Logon Errors --> System Logon and mark the checkbox Check for multiple logons.
    This configurations give only a warning when the user logs multiple times, and show a checkbox letting the user decide to end or not the previous sessions.
    How to make end previuos sessions mandatory ??
    Regards,
    Franklin Cedillo

    You would have to enforce this at the application level. You can get the IP address of the current client from the framework - IF_WD_APPLICATION method GET_REMOTE_ADDRESS.
    You could write an entry with the IP address into a temporary table during WDDOINIT.  You could clear the entry in the WDDOEXIT.  Also during the WDDOINIT, check to see if there is already an entry for this IP address.  If so, then fire an exit nagivation plug to a static MIME object or BSP page that explains why the user can only be logged in once.

  • Need to do availability check for multiple materials (in bulk)

    HI Friends,
    I need to do availability check for multiple materials. Currently i am using function module AVAILABILITY_CHECK within a loop.For my purpose I could find this particular FM as well as BAPI "BAPI_MATERIAL_AVAILABILITY" however both of this options can not be used for more then one materials at a time.
    I want to take out the loop from the code and get multiple materials be ckecked at once for availability. If AVAILABILTY_CHECK FM can be used for multiple materials, please post the usage.
    Any other options are there?
    Any help or clue would be appreciated.
    Thanks in advance.

    Use the BAPI.  Even if such a function existed, it would still perform the relevant internal logic required for checking by material, so you wouldn't gain anything.

  • ATP check for multiple materials on multiple sales document

    Hi,
    System 4.70
    Is it possible to carry out an ATP check for multiple materials on multiple sales documents.
    I have written a bespoke program and the program requires an ATP check to be performed for each material and sales document, I am currently using BAPI_MATERIAL_AVAILABILITY which is bringing back the necessary information but it's a bit slow.
    Does any one have any ideas please.
    Regards
    J-J

    The ATP Check using the BAPI is done per material and plant. If you're looping through sales documents and then materials you're probably doing the ATP check for the same material over and over again.
    Just get the list of materials you need and the corresponding plants and call the BAPI for each of them.
    Also do a run-time analysis (tcode SE30) to check exactly what slows down your program.
    regards.

  • Cisco LMS - Check for multiple words?

    Can anyvbody help me out with a Cisco LMS query.
    I'm doing a complaince check for snmp-server location
    +snmp-server location [#.*#]
    But I assume as I've got mulitple words which may vary it shows as not present in the complaince check even though it's in the config.
    e.g. snmp-server location Martin's house in the middle of Scotland
    I think [#.*#] stands for a missing string but not for multiple words, can anyone help me out with what I could use for multiple words?
    Thanks in advance
    Martin

    I could solve the monitoring issue with snmp context configuration. I had to map each OSPF process to a snmp community. So i could retrieve data for each OPSF process. My issue now is how to add multiple communities to an LMS controlled device.
    As far as i know, LMS support only one RO community per device.
    regards
    alex

  • How do I set up a master slide in Keynote that provides placeholders for multiple images?

    I came across an article in Mac|Life (Oct 2012 p90) titled "Create a Stylish Slideshow".  The steps include creating a master slide that allows for you to add multiple photos.  My master slide list for all themes allows for only one photo per slide.  What am I missing and how can I set up a slide to which I can add multiple photos as they do in this article?  Yes, I am using Keynote '09 v5.3.

    Thanks for the info.  Following the instructions which are covered in chap 12 of the User Manual, I found that I cannot use shapes as placeholders.  The only success I experienced was if I used an actual photo image.  With photos I could select  Define as Media Placeholder, with Shapes, the only option was to Define as Text Placeholder.  I will address this with a thorough review of chapter 12.  
    My initial problem was that I assumed that all themes in Keynote possessed the same set of Master slides.  When I found this not to be the case I looked at each theme and identified 12 of the 44 provided different master slide options which provided placeholders for more than 1 photo (a few provided up to 6).  For helpful information for others, here is a listing of those themes that provide master slides for more than 1 photo:  Editorial, Kyoto, Brushed Canvas, Typeset, Craft, Stock Book, Blue Print, Vellum, Modern Portfolio, White Corners, Storyboard, Formal. 
    Thanks again.  Your feedback got me on the right track to resolving my problem.

  • Using Guides for multiple Slides

    Hello there,
    my problem is as follows:
    I want to be able to use Guides in Keynote for multiple slides. In other words: once I set up guides for one slide, I then also want to see those guides when switching to the next slide.
    Why do I want to do that? Once I find a nice layout which I want to use throughout my presentation, eg. always a picture at a certain position, I want to use the guides to then help me to align pictures on all the other slides at the same position
    Thx for any help!
    Best,
    Helio

    Hi,
    I think I've got it, the issue you have has been driving me nuts and I have tried all sorts (incl. the work-around as suggested by Gillian).
    What I have discovered is that the guides placed on the master are on the slides – it's just they are not visible!!! You will see that when you move an object on the slide it will snap to a guide that you have placed on the master. Quite clever in a way but not practical in another way, so the work-around might still be a good way to help visually.
    I'm aware this is not a great help, but at least it explains how the guides work.
    Hopefully in the next release we will have guides that work like indesign!

  • Names of objects for multiple actions in different slides

    I am trying to develope an interactive software guide which
    requires something like a panel to insert it in each slide. This
    panel contains precise instructions on how tu use the interface
    visible in the current slide.
    The problem is that sometimes the panel hides part of the
    interface. I would like to have a button somewhere in each slide so
    that the student can simply hide the panel when is obscuring
    something important. I don´t have any problem for preparing
    one panel for one slide using multiple actions for hiding or
    showing the panel, captions, buttons, etc. But the problem is that
    in each slide the similar objects have different names assigned
    automatically by Captivate. I found no way to assign same names in
    different slides so that afterwards, assigning multiple actions
    would be only a matter of copy and paste from slide to slide. I
    tried to think something with variables but I gave up.
    I am using Captivate 4 Trial. Somebody has a nice good idea?
    :)

    Hi,
    Inorder to give same name to the objects in different slides,
    there is a workaround. Immediately after opening a project, give
    the same name to the objects in different slides.
    Hope this solves your problem.
    thanks
    ravi

  • Is it OK to duplicate quiz slides for the sake of allowing multiple attempts to answer the question?

    I am using Captivate 4 and have several quiz slides interpersed throughout my project. The user MUST get the answer correct so I am allowing them mulitple attempts to answer the question. The problem I run into is that when the question is answered incorrectly, the user is automatically brought to the next slide and is not able to re-answer the question. How can the user re-answer the question before moving on with the content? Is it OK to duplicate the question slide?
    Example:
    Memorial day always falls on a:
    A) Monday
    B)Sunday
    C)Friday
    D)Saturday
    If the user selects either B, C, D I want them to see feedback that says they are incorrect and to please select a different answer. Of course, if the user selects A, the correct answer, the captivate just moves on.
    (NOTE: I have already added advanced actions to the multiple choice questions showing customized feedback for the incorrect answer...I just need to let the user try the question again!)
    It seems like I will get into some complex branching by duplicating the slide for incorrect response...I just need to know if this is OK to do and will it work?
    OR - is there a better solution
    Please help. Thanks in advance.

    Hello,
    Sorry, but apparently we do live in different time zones, morning over here, have to teach in a few minutes.
    Will try to answer this afternoon. To give differentiated feedback, depending on answers, you'll need to construct your question slides instead of using the default Question slides. That means: using Text captions, interactive objects, user variables and advanced actions.
    Lilybiri

  • CP5: Scoring and Quiz Result Slides for Selected Questions

    Hello World,
    I am trying to create a course that has several "knowledge checks" that don't need to be scored or tracked, and then a 10 question quiz at the end that needs to be scored and tracked.
    Does anyone know of a way to separate those two elements so that the Quiz Results slide does not include any of my "knowledge check" data and just gives the user details of the 10 question quiz? I would also like to use the progress bar, but only for the final 10 questions.
    Alternatively, if the quiz result screen separated out the results of the knowledge checks from the quiz, that would work as well.
    Thanks,
    Graham

    Hello,
    If you use the Question slides that come with Captivate, all the slides will be added to the total score because you can only have one Quiz in a CP-file.
    Some ideas: you could set the score of the first (not te be tracked) slides to 0, or if possible change the questions from scored to survey (will not be scored).
    If by Progress you mean the indication 'Question X of Y', there you will need to make your own counters, with user variables and advanced actions. If you want to have total control of your question slides you could create the first bunch of questions yourself and only use the default Question slides for the real last Quiz. Just published a blog post today with some links to articles about customizing Quizzes. Feel free to check it:
    Customize your Quiz using advanced actions
    Lilybiri

Maybe you are looking for