Knowledge Warehouse Installation

Hello Experts,
I am a beginner to KM/KW. I have a few very basic questions which i am not able to understand.
Firstly, what is the difference between KW and KM. is KW a Subset of KM. basic difference..
Secondly, Is there any document available which will help me install this KW. Also softwares CD's/DVD's that are required for the purpose.
If there is no single document, can anybody just briefly explain me how the over all setup should be done one by one.. i have gone through so many documents and belive it or not i am totally confused and lost. With your expertice i might be able to get a hang of what this is about and shall successfully configure it too.
From the documents i have read so far i could figure out that KW can be used to create / publish centralized business process documents.. etc.. also some of the standard training material is available for assisting project team member (if you are licensed). What i could not figure out is how to start of the installation. what is it required. Do we have to associate it to our SAP production server (R/3)? etc.. or can we isolate and just do a separate installation.
Experts, could you please shed some light and enlighten me with your knowledge on this..
Thanks,
Anees

Hi,
Below is the KW installation Guide
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/49df0894-0701-0010-6d9c-cf68220ac0a8
KW configuration Guide
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0e8f695-dbe2-2b10-d495-c3ab4be0072e
Some useful links
http://help.sap.com/saphelp_nw04s/helpdata/en/8f/d82d37ba466b5be10000009b38f936/frameset.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f04bb5e3-7d55-2a10-7991-a02e07f8c830
Raghu

Similar Messages

SAP Knowledge Warehouse

Hi All,
I would like to know some general things about SAP Knowledge Warehouse Like.
1. Installation?
a.Where can I get the installation DVD from?
b.Is it a part of SAP NW04 installation kit?
c.Does SAP KW require a separate Licence apart from NW04?
2. Is it possible to integrate SAP KW into SAP EP?
Points will be awarded for helpful answers.
Regards,
Vinod

hi
good
go through this link
http://help.sap.com/saphelp_nw04s/helpdata/en/8f/d82d37ba466b5be10000009b38f936/content.htm
thanks
mrutyun^

Solution Manager instead of Knowledge Warehouse?

Hi!
We work today with Knowledge Warehouse (Version: 6200.600.144) to manage user guides and connect the user guides with R/3 via transactions. As we are upgrading SAP-GUI to 7.10 our version of KW stops to work with R/3. This means in the current situation that the person administering user guides in KW can not upgrade its GUI, which is unsustainable in the long run. It also means that KW does not work with our solution with Citrix/Metaframe.
Therefore think we should take hold of this and focus on the possibility of using Solman as a possible replacement for KW. Is it at all possible to manage user guides in Solman? Can Solman generate html pages? Can Solman make same bindings via R/3 with transactions as our version of KW?
We do not want to upgrade KW.
What are your recommendations if Solman is not an option?
Sincerely
Jesper Sandberg

Hi,
Pls hav a look into dis.
[http://help.sap.com/saphelp_smehp1/helpdata/en/4d/e41b12141f442786b0084d7842a99d/frameset.htm|http://help.sap.com/saphelp_smehp1/helpdata/en/4d/e41b12141f442786b0084d7842a99d/frameset.htm]
Thx,
waseem

User authentication in knowledge warehouse 4

Hi all,
I am not sure whether I am posting into the right forum regarding my question but I'll go ahead anyhow :).
I need to add a link to the knowledge warehouse browser gui that calls a JSP. This JSP will finally call a function module on the R/3 KW, but needs to authenticate the user before being allowed to make the call.
I am wondering how user and password information are stored/maintained in a knowledge warehouse browser context. They are definitely not stored in a cookie, as far as I found out. Does anyone know if they can be found and accessed somehow?
This is a vital question for the project I am working on and therefor I am very thankful for any input on this!
With best regards,
Helga

Hallo Klaus,
thanks for helping me out on this. I guess I should have posted it to the Java Programming forum what I will do now.
I am curious if I will get a reply from out of the "dark inhouse channels" ;-).
Thanks again!
Helga

User authentication (JSP) with knowledge warehouse 4

Hi all,
I am not sure whether I am posting into the right forum regarding my question but I'll go ahead anyhow :).
I need to add a link to the knowledge warehouse browser gui that calls a JSP. This JSP will finally call a function module on the R/3 KW, but needs to authenticate the user before being allowed to make the call.
I am wondering how user and password information are stored/maintained in a knowledge warehouse browser context. They are definitely not stored in a cookie, as far as I found out. Does anyone know if they can be found and accessed somehow?
This is a vital question for the project I am working on and therefor I am very thankful for any input on this!
With best regards,
Helga

Hello Helga,
does this Article helps you:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/enabling%20single%20sign-on%20from%20sap%20j2ee%20engine%20to%20non-sap%20java%20applications.article">Enabling Single Sign-On from SAP J2EE Engine/EP to Non-SAP Java Applications</a>
Regards
Gregor

SAP Knowledge Warehouse - Error Page

Hello all. I'm want to use Knowledge Warehouse in web browser. Go to http://172.18.77.08:50000/SAPIKS2/jsp/adminShow.jsp and view :
An error occurred during processing of your request
Most common causes: Requested URL is wrong or incomplete; Requested content does not exist in the underlying backend system; Connection to the underlying backend system is incorrectly configured; User is working in the wrong context.
Contact the support service or try again later
Server Time: 6 Jun 2007 13:25
Request URL: http://portal:50000/SAPIKS2/jsp/adminShow.jsp
KW Context: TMP_IWB_TASK=DISPLAY RELEASE=700 LANGUAGE=EN
HTTP Error Code: 404
Servlet Name: jsp
Servlet Message: The requested resource /SAPIKS2/jsp/adminShow.jsp is not available
Can any body help me?

Hello Stefan Hewener! thanks for reply. I'm trying this URL http://172.18.77.08:50000/SAPIKS2/testApplConfigParams.sap and Configure the KW settings, but when i'm try Home page for KW http://172.18.77.08:50000/SAPIKS2/topNavigation.sap
i'm view
SAP Knowledge Warehouse - Error Page
An error occurred during processing of your request
Most common causes: Requested URL is wrong or incomplete; Requested content does not exist in the underlying backend system; Connection to the underlying backend system is incorrectly configured; User is working in the wrong context.
Contact the support service or try again later
Server Time:     14 Jun 2007 11:35
Request URL:     http://172.18.77.08:50000/SAPIKS2/topNavigation.sap
KW Context:     TMP_IWB_TASK=DISPLAY RELEASE=700 LANGUAGE=EN
HTTP Error Code:     500
Servlet Name:     FrontController
Servlet Message:     Object does not exist.
Java stack trace:     Object does not exist.
java.lang.IllegalArgumentException
at com.sap.kw.access.KwGetData.hasAuthority(KwGetData.java:3178)
at com.sap.kw.access.KwShell.hasAuthority(KwShell.java:3467)
at com.sap.kw.access.KwShell.addUser(KwShell.java:273)
at com.sap.kw.actions.AuthenticationFilter.doFilter(AuthenticationFilter.java:206)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:373)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:Unknown)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please if you know that me to do, help me.
Thanks And Regards! Sergo Beradze.

Knowledge warehouse is not working

hi,
with the link
http://SERVER:50000/SAPIKS2
Of course i have put in the right value for our server.
i only receive a EMPTY page.
Can anybody tell me what is wrong here ? I want to use the 'knowledge warehouse'.
best reg, Martin

The config url Knowledge Warehouse on http is :
http://SERVER:50000/SAPIKS2/chgApplConfigParams.sap
If you have any problems, post me.
rewarding for help answer.

Knowledge Warehouse Workflow problem

Hello Experts,
I have a deal with Internal Knowledge Warehouse in Solution Manager.
My task is to make work 2 workflows "Approval" and "Copy Edit" for creation documents in 2 main project management transactions RMMAIN and SOLAR01 (document areas IWBASAP and IWBSOLAR).
I have configured without errors everything that I had found in trx SI24: maintain areas and organization plan, activate workflow engine and exact KM workflows.
These 2 workflow tasks TG 70000013 and TG 70000014 work Good! - I have tested them in trx SWUS.
Both areas configured in SI24_12 for APPROVE and COPY_EDIT.
Both authorizations roles (Z)SAP_KM_KW_ALL_AREAS_EDIT and (Z)SAP_KM_KW_ADMINISTRATOR have been configured properly.
BUT:
Creating/Changing document with statuses "For release" or "Copy editing" in RMMAIN or SOLAR01 DO NOT FIRE Workflow triggers TO_BE_RELEASED or COPY_EDITING (they are in Activated status!). And therefore workflows do not start. And no errors come on screen.
Thanx in advance,
Alexander

> I've had the same problem before, all my other files
publish just fine,
> but not
> the pictures in the Quiz KO. I typically have to
manually add them as Amy
> said, and have to make sure that they are in the same
folder and burn them
> to
> the cd, too. It is a pain!
The reason for this is that, since you have used a KO, the
images are not
imported into Authorware, They are referenced by a variable,
rather than
directly linked in a Display icon. Authorware does not know,
at the time of
packaging, which images you need so you have to tell it.
The best thing to do is place all your images in a subfolder
of the folder
that you have placed your development code, and then add that
folder to the
packaging process in One Button Publishing.
Steve
EuroTAAC eLearning 2007
http://www.eurotaac.com
Adobe Community Expert: Authorware, Flash Mobile and Devices
My blog -
http://stevehoward.blogspot.com/
Authorware tips -
http://www.tomorrows-key.com

How can we access SAP Knowledge Warehouse?

I tried to access documentation of Business Package Asset 50.3 but cannot view following page:
http://kwhelp.sap.com/SAPIKS/Scb7465fa8e834146a3d8f1f217b86062/KW/KW/IWB_EXTHLPF396373B612A6448E10000000A11402F/..%5C..%5CKW%5CIWB_EXTHLP61B56970D46C11D6B2C400508B5D5211%5C
which contains Technical Description and configuration notes.
How can we get ID to access Knowledge Warehouse of SAP?

Hi,
please try this one: http://kwhelp.sap.com/SAPIKS/Sdf60c4690c954d0cb13fdb292f965944/KW/IWB_STRUCTF896373B612A6448E10000000A11402F/IWB_EXTHLPF396373B612A6448E10000000A11402F/?LANGUAGE=EN&RELEASE=50_2003_Q2&IWB_INDUSTRY=EP_CONTENT&IWB_COUNTRY=&TMP_IWB_TASK=DISPLAY
It worked fine for me
Kind regards
Karin

REG: SAP Knowledge warehouse

Hi All,
Can u anybody have SAP Knowledge warehouse? if, please contact me thro mail ID : [email protected]
Thanks,
- Sel

Hi,
Check your mail. i have sent u a document.
Sry it has been returned not delivered coz the size is more. Anyway will try to send frm outside.
Regards,
Senthil
Message was edited by: senthil kumar

Sap knowledge warehouse 7.0

Dear all,
i m new in SAP Knowledge warehouse. i implemented SAP KW7.0 and now i want to add some personal docs loke word/excel or ppt in content server.
Plz guide me for doing the same.
Regards.
Rakesh Thakkar.

Hello Rakesh,
well, there's a lot of things to do, here a short summary:
you have to configure the system according to the SAP KW configuration guide (http://service.sap.com/instguides).
you need the sap templates, the relevant transports are mentioned in the guide, without them, you can't work.
Then you have to create a context, in ta sii1 (change documentation), you have to switch to the context you created, create a folder, and then, within the newly created folder, you can create documents.
Hope that helps, kind regards,
Carl

Confused between knowledge management and knowledge warehouse

Dear all,
I'm confused on knowledge management in EP and knowledge warehouse.
What is the difference between them?
After reading several documents, I still don't understand...
Could anybody help me about the concept, please?
Thanks
Regards

Hi,
See this link
/thread/175875 [original link is broken]
What is the difference between Knowledge Management and Knowledge Warehouse?
Senthil K.

Some questions regarding SAP Content Server / Knowledge Warehouse

Hi,
we are thinking about SAP Knowledge Warehouse which needs the SAP Content Server.
Is it possible to install the Conent Server together with a Solution Manager System where we would like to use the Knowledge Warehouse functionallity? The Conent Server needs his own database instance. Is it possible to add it to the actually installed Maxdb for the Solution Manager?
What is the actual version of the Content Server 6.30 or 6.40? Is there no 7.0? What about the future of the Content Server?
We are running Solution Manager 7.0 EHP1. Is it possible to install the content server on the same machine? What about the database? Can I use the already installed DB of solution manager?
Thanks ahead
Bernd
Edited by: Bernd Speckmann on Apr 26, 2010 10:55 AM

Is it possible to install the Conent Server together with a Solution Manager System where we would like to use the Knowledge Warehouse functionallity?
If you have enougth resourses why not?
The Conent Server needs his own database instance.
This is are not true, you can install content server without MAX DB.
Is it possible to add it to the actually installed Maxdb for the Solution Manager?
Again why not, if you have correct max db version per PAM for content server (you need 2 DB instance second are for cache server) check pam for NW 7.0 (the PDF document) you find information about content server requirements here and in page --> Database components on same NW 7.0 PAM.
What is the actual version of the Content Server 6.30 or 6.40?
6.40 are last version,
We are running Solution Manager 7.0 EHP1. Is it possible to install the content server on the same machine?
Your OS are ? I'm install cont server 6.40 on system where NW 7.0 are installed without problem, do not know about NW EHP1 .... Good backup are start point .....
Regards.

Difference between Knowledge Management and Knowledge Warehouse

Hello All,
Could you pls help me with the differences between <b>Knowledge Management and Knowledge Warehouse</b> and their relative advantages over each other.
Also, if possible pls help with me some documents about Knowledge Warehouse.
My mail id :[email protected]
Regards,
venkat.

Hello,
KMC (Knowledge Manageent and Collaboration) is the SAP EPs functionality for providing a central approach to a companies unstructured and distributet document storages and informations.
KW (Knowledge Warehouse) is meant for documentation, training materials and (quality-management) manuals.
Since NW04s, both functionalities are part of the IT scenario "enterprise knowledge management".
There's always a lot of misunderstanding about which functionality is provided by which tool, hopefully, the two will be merged into one functionality, but this might be only my opinion.
For further questions concerning KW, you can as well contact me directly, this forum is mainly for KMC.
kind regards,
Carl

Failure on clean install of Service Manager 2012 R2 Data Warehouse installation - Error about "AssignSdkAccountAsSsrsPublisher"

I'm installing the Data Warehouse component on a new server (Server 2008 R2 SP1 with SQL 2012 SP1 CU6). Reporting service, analysis services and full text services are installed. I'm installing under an account that has DBO rights to the instance.
All pre-reqs pass. The installation gets to the very end of the installation and i get the following error:
An error occurred while executing a custom action:_AssignSdkAccountAsSsrsPublisher
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the Original state of the system. Once the correction are made, you can retry upgrade for this role.
I look in the setup logs and only see the following reference to "AssignSdkAccountAsSsrsPublisher"
MSI (s) (1C:00) [15:09:51:914]: NOTE: custom action _AssignSdkAccountAsSsrsPublisher unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _AssignSdkAccountAsSsrsPublisher returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Originally, I had some issues with services not being started during the install because some accounts didn't have "logon as a service" rights, but those have all been rectified. Not sure if something is leftover from that, or maybe CU6 wasn't
tested with SM R2 and i need to go back to an earlier CU?

That worked for me too. By manually removing all the folders from SSRS, then retrying the install, allowed it to proceed and complete successfully the second time around.
The first time installing SCSM 2012 R2, I got hit with
this error, which is why SSRS wasn't in a clean state. Make sure to launch setup.exe elevated as an admin!

Knowledge Warehouse Installation

Similar Messages

Maybe you are looking for