Known issues with MacBook Pro video chip

hanging up ands dscrew screen

For example:
According to this: http://www.cable-modem.net/broadbandarticles/comcastspeed.html T1 service providers offer 1.544 Mbps download and upload speeds and Comcast has long offered high-speed broadband connections with 6 Mbps download and 1 Mbps upload speeds; but with the advent of DOCSIS 3.0 technology, Comcast cable modems can now access the Internet at wideband speeds as high as 50 Mbps at affordable prices.
You can see, download speed is not a big advantage of a T1 line.

Similar Messages

Video issues with macbook pro

My 1 year old MacBook Pro has suddenly developed issues with playing all videos. They are very slow and stop constantly making viewing almost impossible. I have downloaded Flash player again but no help. I have strong internet via cable.

I'm also getting some really bad sound quality on facebook notifications. I've been forced to disable them they sound horrible like they are clipping.
Trying to figure out if this is a problem on all Late 2013 15" macbook pros or if mine is defective? This occurs even at around 20-30% volume levels with the Facebook notification sound problems...

Blue tooth issues with macbook pro late 2011

I purchased the new beats pill and havinng issues with connectivity with macbook pro. My Iphone works well. Any suggestions

I have a similar issue. Have you had any luck with a fix, yet? I have a Samsung sound bar, and my Ipad and Iphone both connect with no issues. The playback is uninterrupted with fine sound quality. My 2011 13" Macbook Pro connects, however playback often sounds like a scratched CD. Last year I called both, Samsung and Apple, and when all was said and done it was recommended that I bring the then brand new sound bar and my Macbook to an Apple Store. Any suggestions I are appreciated.

Connection issues with MacBook Pro and DVI to component video

How do I connect a 2007 macbook pro to a regular tv (non-hd) via the DVI port with component cables? The image is always scrambled. The connections are fine, what do I need to do?

Concerning this comment:
I know that neither the adapter nor the VGA cable have a problem since I connected the computer to my 1080p TV and it worked just fine...
I would like to point out that 1080p has a lower pixel clock than will 1920 x 1200. So it could be the stability problem is only present when the pixel clock is at the high end of the range.
You could return the adapter and try another. A new one might have better margins. Another thing you could try is to use a utility like SwitchResX to lower the pixel clock and see if stability improves.

2 issues with MacBook Pro Retina - Fan randomly speeds up and USB3.0 Issues

So I just purchased a brand new MacBook Pro Retina 15" 2.40GHz.
Randomly, when nothing but finder is open, the fans will spin at full speed.
I have opened every application on the machine including serato, ableton, photoshop, VLC playing a 1080P movie, iTunes playing music and youtube playing videos in 2 tabs - and the fans do not spin as fast at it does when nothing is open or running (confirmed with activity monitor too).
Secondly, once I eject a USB3.0 drive from the machine, I have to reboot the system before the drive can be mounted, or even recognized at all by the computer. (it does not even show up in disk utility till the reboot). this happens with 2 seperate USB3.0 external hard drives that work fine on other rMBPs. This happens with both usb ports too.
I have reset SMC, PRAM, ran all Apple updates as well as reinstalled the operating system (as well as booted from a known good system in target disk mode).
Please help

There are a few threads reporting the fan issues you are dealing with which you might want to look at. I have now experianced it with four brand new 2013 rMBP.
Threads reagarding fan issues:
https://discussions.apple.com/thread/4735947?tstart=0
https://discussions.apple.com/thread/4744182?tstart=0

Screen Issues with MacBook Pro (Static Lines)

Hey guys. I aam having problems with my Screen/Display on my Macbook Pro.
Static lines appear aprox 1/3 of the way in from the right side. The lines run horizontally about 1 inch in length and running vertically all the way down the display. A screen shot shows a normal working display. Took a pic of the problem:
I cannot run hardware tools. My computer did not come with a disc and I know they are only a shipping charge but I do not have even $5. I am a student and this is my only way to do my schoolwork. The Screen (inner display and outer protective screen) was replaced by Apple in May '12. The 1 yr warranty ran out in June '12. When the screen was replaced it started doing this as well, but had not gotten this bad. There are now 2 where there was only one yesterday. I am wondering if it may be the cable as moving the display often fixes or produces the problem. I know the cable is not very expensive and not to difficult to replace.
Here is the info on my Mac:
Nice Name:
Machine Model: MacBookPro9,1
Name: MacBook Pro (mid 2012) 15 inch
Family name: A1286
Model Number: MD103
Group1: MacBook
Group2: Pro
Generation:
CPU speed: 2.3GHz
Screen size: 15.4 inch
Screen resolution: 1440x900 pixels
Colour: Aluminium
Production year: 2012
Production week: 13 (April)
Model introduced: 2012
Memory - flavour: DDR3-S-1600
Memory - number of slots: 2
Memory - maximum total: 16GB
Memory - largest module: 8GB
Factory: C0 (Quanta Computer (Susidiary = Tech Com))

It is getting worse in the sense that it is occuring more often and taking longer to resolve. Moving the laptop lid/display would typically fix the prblem in the past but now it is hit or miss. Even vibrations will cause the issue to occur or resolve. We are leaning more towards the issue being a cable and not the display. Since taking a screenshot produces a pic without issues I would gather that the video card is fuctioning properly. I welcome any comments on this.

Issues with Macbook Pro display.

Hi. Recently, I haven't been having too much luck with Apple products. It started with my Macbook pro Core 2 duo 2.16. It had screen issues, leading to the screen being replaced (replacement screen contained several dead pixels), alongside a logic board, video card, and sound board replacement over the short life of the computer. Apple recently replaced it with a new 2.4 GHz Macbook Pro.
When I first turned it on, only 3 bottom pads made contact with my desk at all, causing the computer to become lob-sided. I brought it to the Apple store and they brought it to their back room to fix it (I am not sure about what they did to it though). The fix was mostly successful and brought the computer "within spec"... Shortly after the fix, I got home and my monitor started acting up by displaying black vertical bars along my screen. The left side of my screen was also disconnected from the aluminum frame; both issues can be seen at http://gallery.mac.com/eliete#100037 . The odd thing is that the issue only comes up every other time I use the computer, and closing-opening the clamshell usually cures the problem temporarily. I discovered that whenever I take a picture in Photo-booth, the screen flash aggravates the problem, making the issue very obvious, and obtrusive.
I do a lot of photography work with Aperture 2 and Photoshop Elements 6, and performance wise, the computer is fantastic, but what good is a fast computer with an awful screen? I do not want to switch back to the PC platform because the Mac OS is just that much better, and I rely on this computer for many everyday tasks. What do you think I should do? - I would rather not have the screen replaced due to the possibility of dead pixels (VERY irritating when editing photos), but it looks like that may be the only option. Do you think that I should wait until the WWDC to see what update the MBP will see, incase they replace my computer a second time? Thank You in advance.

First thing I'd to is take it to the Apple Store, you can talk with them about this. I'm sorry you have been having so much trouble, while Macs are good in general there are some lemons. I bought my current MacBook Pro in August. Within a few weeks of buying it, there were a handful of dead pixels on the display as well as a couple of pale spots (bruises that the Apple store said was my fault). I got the display (the entire top 1/2...display, iSight, etc.) replaced over Labor Day weekend and haven't had a dead pixel or blemish since then. If you wait until WWDC, there are two things to consider: 1) you will have the problem for a few more weeks, and 2) replacements may be refurbished laptops and not necessarily a new laptop. Why bother? If I were you, I'd take it in ASAP and see what options I'm given. If the screen is repaired and dead pixels arise, the screen can be replaced again. What's worse, the possibility of dead pixels, or putting up with the bad display for another month (or two...Apple has a history of introducing things at MacWorld and WWDC that aren't available until the following month)? Hope I helped.
-AHeneen

Issues with Macbook Pro Quality

I purchased a Macbook Pro (early 2008) and have been plagued with issues. It makes me question the quality control of these notebooks when they cost over 2K per machine. If you are someone who needs a laptop that is reliable, may I suggest you look elsewhere.
Today, my battery exploded which is what prompted me to post here. Since the laptop is no longer under warranty, support is not offered without a fee.
Here is a summary of my repairs/issues in chronological order:
-Video card failure
-Battery failure
-Motherboard replacement
-Charger failure
-Hard drive failure
-Battery exploded
Given that this laptop was over 2K, I would expect better quality. I am very careful with my electronics. To give you a sense of how careful and conscientious I am, I am still using my iPod Photo from 2004. It was this quality I was hoping to get when I purchased this Macbook Pro. Overall, I am very dissapointed in this company. I had to pay for many of these repairs/replacements, issues that should not be present.

So, I guess no tech support question for us?

Issue with MacBook Pro charger?

Hello,
I bought my MacBook Pro 15" in October 2009. I hardly ever take it out of my place. Senior Apple adviser told me, that the battery in my computer is factory calibrated, so bassically I treat my laptop as iMac. It's connected to the charger all the time. When I'm done using it, I either put it to sleep or shut it down. Two days ago I noticed: (Not Charging) by the icon of the battery. Apparently the charger stopped charging. It's MagSafe charger with T style connector. From what I've been reading in disscussion forum regarding charger issues, it looks like perhaps this charger needs to be replaced.
But the interesting part is, that the green led on the connector holds steady since (Not Charging) appeared two days ago, and also, the battery power dropped only to 94% and holds steady as well.
So this makes me wonder, is there something wrong with the charger, or is it something else?
My computer knowhow is limited, so any information or tip will be appreciated.
Thanks

http://support.apple.com/kb/TS1713
You can try resetting the SMC http://support.apple.com/kb/ht3964

After several repairs, still having heating issue with MacBook Pro (mid '09)

EDIT: this post got removed the first time for not being constructive enough. I've now edited the post.
This is going to be a lengthy post, so bear with me.
2 months ago, I suddenly noticed my MacBook Pro (medio 2009, 15", 4GB RAM, GeForce 9400M) heating up a lot harder than usual. I'm familiar with the heating issues these laptops have, but this wasn't normal. Looking at iStat Pro, I saw my fans almost taking off like an airplane at 5700 rpm, while watching only a livestream on my browser. I know Shockwave Flash takes up quite a chunk of your CPU, but I had never encountered this problem beforehand.
The biggest problem wasn't just the heat or the fans, but the fact that my computer also started reacting rather slowly. Sometimes I'd even get beachballed, or the whole browser stopped responding for half a minute...
So I tried to see if gaming was still an option. Of course not. I had been playing League of Legends for several months without any issues. Whilst playing, I'd kick up my fans manually to about 4000 rpm, and they'd stay there throughout the whole game. Now, when I start up the game, it plays smoothly for the first 2 minutes. After the temperatures rise to a critical level, the fans start spinning up to 5700 rpm, and the whole game plays like a powerpoint presentation.
On a sidenote: it sort of 'lags' every 1-2 seconds, and sometimes, after a long period, the game acts somewhat normal again (20 mins). This game uses wine to run, which isn't the most optimal way. So I tried playing Team Fortress 2, too. Probably even worse results! (but again noticeable 1-2 second interval lags)
Before anyone starts screaming: "Don't use your Mac for gaming!" etc., I wish to point out that these two games had been running perfectly for the past few months/years. Something's definitely wrong.
After looking for some solutions myself, I decided to go to an authorized Apple Service in my city. A few days later, they told me my logic board was broken, and I had to pay almost 700 euros ($ 900-1000) to replace it. So I did. I got it back, but it wasn't fixed. Brought it back in. Got it back a week later: "Your new logic board we got from Apple was already broken, but we hadn't noticed. We put a new one in it. It's fixed." Again, same problem.
We're almost 2 months later and 700 euros poorer, still no result. I've brought it in about 6-7 times now, here's a list of what they've tried so far:
- In total 3 new logic boards
- New MagSafe (because they discovered it was giving too much power too my laptop)
- Fresh re-install
- Replaced RAM
- Checked fans etc. (they do this by default)
- A few tests which proved that it was repaired (but I have my doubts with these tests...)
They told me now that it's fixed, and they basically won't look into it anymore. I must contact Apple myself, if I wasn't satisfied. The tests they performed showed no signs of heating issues. (One of the tests was playing 4 1080p movies at the same time. When I watch a 1080p movie on Youtube, my laptop is taking off like a plane) They ran a stress test all night long, showing no temperatures above 98°C. I got it up to 105°C in a few minutes according to iStat Pro.
They advised me to install Mountain Lion, which would make the issues with "high-performance sites" go away. I haven't seen much improvement, though.
This whole experience has been quite frustrating, especially now that I'm gonna need my laptop for University again. Isn't there anything I can do? I've paid almost 700 euros and missed my laptop for 2 months, without any results.
I've got more information regarding the issues if needed, ask away. I'm getting desperate.
I've been browsing around the support communites, and found that a lot of people are having issues since they upgraded to OS X Lion. Could this be the case? Should I try downgrading to Snow Leopard?
I've also found a few topics on refreshing the cooling pasta on the heatsink. Would they have noticed any problems with this after replacing the Logic Board several times? Or should I check it myself? I'm not too keen on opening up my laptop myself...
Nick.

Thought of buying Parallels? Fusion?
Might want to see if this gets moved to the MacBook Pro forum.
I'd think Windows 8.1 is smart enough (what I use 90% time since the Dev Preview came out couple yrs ago it seems like) to find the driver.

Issue with MacBook Pro (mid 2009) wifi multiple AP signal 'confusion'

I'll try to explain this as best I can, not being an expert in networking!
I recently upgraded my router from a Linksys WRT160N to an Airport Extreme, in the hope that it would do a better job of broadcasting a stronger wifi signal throughout my house. Whilst it is improved, it's still no good enough for streaming to my iPad 2 where I want in the house. Reading around on the web I discovered that I should be able to use the Linksys as an AP to extend the effective range of my wifi network, as long as it is hardwired into the base station via Ethernet (no WDS support on the Linksys model).
So, I managed to get this all up and running, disabling the dchp on the Linksys, fixed ip allocation etc and using the same SSID and passwords etc. All is well with the iPhone and iPad2 access - they just automatically switch to the strongest signal no problem when I move around the house. Cool.
The issue lies with the MBP - I have a favoured spot in the house where both the broadcast signal from the AEBS and Linksys are very strong, and the MBP gets all confused. opening up the lid from standby it searches for the wifi (bar moving up and down the signal indicator) and then just has an exclamation mark. I try to manually select the SSID but no dice. I have to switch the MBP adaptor off and on, rescan avail networks, and lo and behold two versions of my SSID are shown. Select one and then it connects. However, I have to go through this whole exercise every time I pull the MBP out of standby, which is very irritating.
I do have a workaround - if I name the SSID on the Linksys something different, the problem goes away. However, i effecktively now have 2 wireless networks & I then have to manually switch between the two SSID's to get the strongest signal depending where I am in the house. It's suffices for now but not ideal.
What I don't get is why is it only the MBP affected & the iPhone & iPad 2 are fine? Is this anything to do with the 2.4 ghz & 5 ghz being broadcast by the AEBS getting all mixed up with just the 2.4 ghz being broadcast from the Linksys??? Both 2.4 & 5 ghz are broadcasting the same SSID.
Any help appreciated.

OK - fixed this now. By setting the 5 Ghz channel on the AEBS to a different SSID and putting this to the top of my priority WIFI connections on the MacBook Pro then it ignores the conflict between the 2.4 Ghz networks being broadcast by the Linksys & AEBS. No more hanging connection when I resume the MBP

Wireless issues with MacBook Pro i5 in Boot Camp Windows 7 x64

I have a 2010 Macbook Pro i5 15''. I'm usually connecting to the 802.11n 5Ghz wireless network of my Time Capsule when running OS X, which works absolutely fine. When running Windows 7 x64 in Boot Camp though, this network can't be found and I have to connect to my secondary 802.11g network of an AirPort Express. Even this network connection usually dies after a few minutes of intensive use though (copying files, playing online games; it's fine with low activity like web surfing). It still appears connected normally, but no data is being transmitted. I have to reset the wireless adapter to get it to work again. The same network works fine for any OS X device.
The Windows drivers for the Broadcom chip in this machine seem really flaky. Anybody else have these problems or maybe a solution?

Yes, sorry, the Boot Camp area would have been a better place to ask. After some more googling I found a helpful thread though, which led me to download this driver package:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem= ob-80585-1&lang=en&cc=us&idx=3&mode=4&
From it I installed the driver called "Broadcom 43225 802.11b/g/n", and presto, I can finally use my 802.11n network under Windows. Hope that's helping other people that may have this problem.

Resolution issue with macbook pro 13 (late 2013) and dell u2711

I have a Dell U2711 (native resolution 2560x1440) that I use without issue with a macbook pro late 2007 (running 10.10.x), various iMacs and Macbook air 2011 running 10.10. When I say without issue, the display works at its native resolution.
Last week we got a MacBook Pro 13in, late 2013 model.
If I connect this macbook via either thunderbolt connection to the u2711 using either DVI port on the dell, the maximum resolution that I can use is 1920x1080. I am using apple mini displayport to DVI adaptors (I have tried 2 different ones and 2 different DVI cables, with no improvement). Clicking option + scaled in sys prefs does not give the native resolution as an option.
However, I just discovered that if I use a DVI to HDMI adaptor and I connect the macbook to the display I get the full native resolution without issue (2560x1440).
I have zapped the pram, powered down the display etc etc etc and it made no difference.
I would prefer to use the mini DIsplayPort to DVI adaptor rather than HDMI, any suggestions appreciated.
TIA.

Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Start up in Safe Mode. http://support.apple.com/en-us/HT1564
Best.

Graphics issues with MacBook Pro 15-inch Late 2011 model

I have a MB Pro 15-inch late 2011 (2.4GHz Core i7) and recently I started to get random screen glitches while working on photoshop and illustrator and then eventually the screen went totally blank and so I paid to have the graphics chip replaced (as I was out of warranty).
After 2 weeks, the same glitches have started again so I did some internet research and discovered that that there are thousands of other people around the world who had similar issues in this particular model range that uses the AMD Graphics chipset (Radeon HD 6770M) combined with the Intel HD Graphics 3000 on the same motherboard.
Does anyone know if Apple has announced a recall / replacement programme for this model as it appears to be a widespread issue ?
Thanks
Rohit

There is an online campaign at change.org which has crossed 10,000 signatories (or is about to) that should prove that there is an issue.
From my analysis, the problem is the AMC Radeon GPU that is the problem - there is some compatibility issue with the logic board. I just paid to get the problem solved, but it has come back again in less than a a week. I installed gfcCardStatus to control which graphics chips are being used and found that when the Intel HD chipset is used, there is no issue, but when it switches to the AMD chipset, the problem returns.
There is certainly an issue and it's widespread and I am sure that this will come back to bite apple in the ***...
I think their issue is probably that the fault lies in AMD's chips and not their circuitry which is probably why they don't want to bear the cost of a recall program unless AMD contribute to the costs...which they won't because Apple have pretty much stopped using AMD GPUs and use nVidia instead now.
Anyway, I'm going to go back to the repair folks and have them re-fix the issue as it's covered by their warranty. Let me know if you have any more luck on your end.

Networking issues with MacBook Pro

I have tried to find this issue on line and in the forums and couldn't I have seen many people have similar issues using VPN connections or Citrix but nothing what I am seeing. I have 3 MacBook Pros that connect fine to our company network. They have the DNS settings from our DHCP server and I can see their leases and everything. We can connect to network drives however we can't connect any of them to the company's intranet sites. If we type in http://companysite and hit enter both Safari and Firefox come back stating that they can't find the server companysite. Not sure why it is looking for a server by the name of companysite when our DNS servers point to the servers that are hosting the sites.
If I type in the IP address of any company site then it works however using the name doesn't. So it sounds like an issue with DNS but again the DNS servers are in the network settings and Windows machines have no issues with using the http://companysite instead of using http://IP Address. Any assistance would be appreciated.

OK, figured out that if I added my company's domain to the search domain list in Network Settings this would allow the MacBook to use http://companysite instead of the IP Address. However now I need to figure out the authentication issue. We use the end user's network credentials for access to the company intranet sites. Using http://companysite I get access denied. Using the IP address allows the end user to enter in their network credentials.

Known issues with MacBook Pro video chip

Similar Messages

Maybe you are looking for