KNOX on Verizon Note 3 blocked???

Samsung announced that ALL new devices starting with Note 3 would be preloaded with KNOX.  Called Samsung customer service because my phone did not have it.  I was told that KNOX was preloaded on ALL new devices EXCEPT Verizon!!!
Verizon customer service doesn't have a clue, or at least the person I spoke with didn't.  Anybody have any luck getting answers?

That's not the only thing that Verizon omitted from the GN3. Earlier videos showed people using hand and eye gestures while surfing. Can't do that with the Verizon GN3. However, I still think this is one monster of a tool. There are lots more to love about this phone than not love.

Similar Messages

  • Samsung Knox Encryption Software not available

    I have a Note 3 and I've been told by Verizon’s Technical Support in a conference call with Samsung Technical Support that Samsung Knox app is not supported Verizon Network. It supposed to be released sometime in the future. My friends works on T-Mobile. Has any got it to work?

    HAHA! I am glad to know that even the support techs on Verzion's end do not know what they are talking about. Here have this a gander:
    https://support.samsungknox.com/entries/26275327-How-is-Samsung-KNOX-loaded-onto-a-device-
    "Currently, Samsung KNOX comes preloaded on the Samsung Galaxy Note 3 and Galaxy Note 10.1 (2014 edition)."
    I hope they have a litigation plan.

  • Sales orders from CRM are not getting blocked with credit check

    Hi All
    I have configured ECC in such a way that , if cutomer does not have enough creditlimt, then those sales order will get blocked. Our orders will come from CRM, and some times some orders are not getting blocked with credit check even though the customer does not have credit limit. And at the same time some orders are blocked with credit check...what are all the things that should be checked to diagnose the problem.
    Thanks in advance for looking into this

    Please check if you have any custom code/user exit in ECC which uses transaction code (VA01 , VA02 or VA05 etc) prior to invoking credit checks. 
    Orders created via CRM will not have transaction code set (SY-TCODE).

  • VC/2 not showing blocked deliverys in ECC6.0

    Dear All Gurus,
    Case Described as below
    In Transaction VC/2 Program (GUI) RVKUSTA1 ECC6.0
    VC/2 Sales Summary report do not showing blocked deliverys or blocked billing documents.
    Excuting VKM1 (Blocked Sd document) for the same customer, I can find the blocked sales doc numbers.
    Could anyone please help me to resolve this issue.
    Thank you in advance.
    Vinayak
    Edited by: Vinayak D on Jan 9, 2009 6:14 PM

    Dear,
    Thank You for the reply.
    In VC/2 there is Quick Info Details, where there are below two details displayed,
    Orders blocked for delivery       0
    Orders blocked for billing          0
    When I excute VKM1 for the same customer, I get display of the blocked Sales Order.
    In VC/2, do not get the number of blocked doc displayed in Quick info,
    Need some reason why it is not getting displayed?
    What are these details available for ?
    BR,
    Vinayak

  • "ERROR: Could not read block 64439 of relation 1663/16385/16658: Result too large"

    Hi,
    I've already archived a lot of assets in my final cut server but since one week there is a message appearing when I click on an asset and choose "Archive". The pop-up says: "ERROR: Could not read block 64439 of relation 1663/16385/16658: Result too large"
    Does anyone know what's the problem and/or have any suggestions to solve my problem?! I can't archive anymore since the first appearance of this message.
    What happened before?
    -> I archived some assets via FCS and then transfered the original media to an offline storage media. That system worked fine for the last months and my normal server stays quit small in storage use. But now, after I added some more new productions and let FCS generate the assets, it doesn't work anymore...
    It's not about the file size - I tried even the smallest file I found in some productions.
    It's not a particular production - I tried some different productions.
    It's not about the storage - there's a lot of storage left on my server.
    So, if someone knows how get this server back on the road - let me know.
    THNX!
    Chris

    I would really appreciate some advice re: recent FCS search errors.
    We're having similar issues to C.P.CGN's 2 year old post, it's only developed for us in the last few weeks.
    Our FCS machine is running 10.6.8 mac os and 1.5.2 final cut server with the latest
    OS 10.6.x updates.
    FCS is still usable for 6 of 8 offliners, but on some machines, searching assets presents "ERROR: could not read block 74012 of relation1663/16385/16576: Input/output error."
    Assuming the OS and/or data drives on the FCS machine were failing, I cloned the database drive today and will clone the OS drive tomorrow night, but after searching the forums and seeing similar error messages I'm not so sure.
    FCS has been running fine for last 4 years, minus the recent Java security issues.
    Thanks in advance, any ideas appreciated!
    cheers,
    Aaron Mooney,
    Post Production Supervisor.
    Electric Playground Daily, Reviews On The Run Daily, Greedy Docs.
    epn.tv

  • Hello,  I have a problem, my computer is interrupted very often CAN I changed Maveric when working and 15 times a day is very disturbing and nustiu what I do is not only blocking and restarts

    hello,
    I have a problem, my computer is interrupted very often CAN I changed Maveric when working and 15 times a day is very disturbing and nustiu what I do is not only blocking and restarts

    If you are getting Kernel Panics, this article (available in many languages) will explain how to find the reports. You can post the latest one here for Readers to help you:
    How to Log a Kernel Panic

  • Lucreate fails with: Root slice device ... for BE ... is not a block device

    Hi,
    I'm running lucreate on a Sol10u7 x86 system as I wanted to get it to u8 level. I installed:
    SUNWlucfg
    SUNWlur
    SUNWluu
    from u8 and then a patch: 121431-58
    System is not zoned and it is on ZFS with following pools:
    pool: rpool
    state: ONLINE
    scrub: none requested
    config:
    NAME STATE READ WRITE CKSUM
    rpool ONLINE 0 0 0
    c1t0d0s0 ONLINE 0 0 0
    errors: No known data errors
    pool: spool
    state: ONLINE
    scrub: none requested
    config:
    NAME STATE READ WRITE CKSUM
    spool ONLINE 0 0 0
    c0t0d0 ONLINE 0 0 0
    This is what happens:
    Creating Alternative Boot Environment..
    lucreate -n s10x_u8
    Checking GRUB menu...
    Analyzing system configuration.
    No name for current boot environment.
    INFORMATION: The current boot environment is not named - assigning name <s10x_u7wos_08>.
    Current boot environment is named <s10x_u7wos_08>.
    Creating initial configuration for primary boot environment <s10x_u7wos_08>.
    The device </dev/dsk/c1t0d0s0> is not a root device for any boot environment; cannot get BE ID.
    PBE configuration successful: PBE name <s10x_u7wos_08> PBE Boot Device </dev/dsk/c1t0d0s0>.
    Comparing source boot environment <s10x_u7wos_08> file systems with the
    file system(s) you specified for the new boot environment. Determining
    which file systems should be in the new boot environment.
    Updating boot environment description database on all BEs.
    Updating system configuration files.
    Creating configuration for boot environment <s10x_u8>.
    Source boot environment is <s10x_u7wos_08>.
    Creating boot environment <s10x_u8>.
    Cloning file systems from boot environment <s10x_u7wos_08> to create boot environment <s10x_u8>.
    Creating snapshot for <rpool/ROOT/s10x_u7wos_08> on <rpool/ROOT/s10x_u7wos_08@s10x_u8>.
    Creating clone for <rpool/ROOT/s10x_u7wos_08@s10x_u8> on <rpool/ROOT/s10x_u8>.
    Setting canmount=noauto for </> in zone <global> on <rpool/ROOT/s10x_u8>.
    Creating snapshot for <rpool/ROOT/s10x_u7wos_08/var> on <rpool/ROOT/s10x_u7wos_08/var@s10x_u8>.
    Creating clone for <rpool/ROOT/s10x_u7wos_08/var@s10x_u8> on <rpool/ROOT/s10x_u8/var>.
    Setting canmount=noauto for </var> in zone <global> on <rpool/ROOT/s10x_u8/var>.
    ERROR: Root slice device </dev/dsk/c1t0d0s0> for BE <s10x_u8> is not a block device: .
    ERROR: Cannot make file systems for boot environment <s10x_u8>.
    Please help,
    Cheers,
    Tom

    devfsadm fixed the issue,

  • FCS "ERROR: could not read block 74012 of relation1663/16385/16576: Input/output error."

    I would really appreciate some advice re: FInal Cut Server search errors.
    FCS has been running well with our Linux based raid Editshare for 4 years, notwithstanding the recent Mac OS Java security issues.
    Our FCS machine is running 10.6.8 mac os and 1.5.2 final cut server with the latest
    OS 10.6.x updates, ancient I know.
    FCS is still searchable for most of our offliners, audio, gfx and onliner machines running 10.7+, but in some cases, searching FCS assets results in "ERROR: could not read block 74012 of relation1663/16385/16576: Input/output error."
    Initially assuming the OS and/or data drives on the FCS machine were failing, I ran disk utility's repair, verify. time machine, and cloned the database drive. I'll clone the OS drive tomorrow, but after checking the forums tonight and seeing similar error messages I'm not so sure it a degraded drive issue.
    Thanks in advance, any ideas appreciated!
    cheers,
    aaron,
    Aaron Mooney,
    Post Production Supervisor, epn.tv
    Electric Playground Daily, Reviews On The Run Daily, Greedy Docs.

    I would really appreciate some advice re: recent FCS search errors.
    We're having similar issues to C.P.CGN's 2 year old post, it's only developed for us in the last few weeks.
    Our FCS machine is running 10.6.8 mac os and 1.5.2 final cut server with the latest
    OS 10.6.x updates.
    FCS is still usable for 6 of 8 offliners, but on some machines, searching assets presents "ERROR: could not read block 74012 of relation1663/16385/16576: Input/output error."
    Assuming the OS and/or data drives on the FCS machine were failing, I cloned the database drive today and will clone the OS drive tomorrow night, but after searching the forums and seeing similar error messages I'm not so sure.
    FCS has been running fine for last 4 years, minus the recent Java security issues.
    Thanks in advance, any ideas appreciated!
    cheers,
    Aaron Mooney,
    Post Production Supervisor.
    Electric Playground Daily, Reviews On The Run Daily, Greedy Docs.
    epn.tv

  • Is Verizon not allowing connections to alternate DNS servers anymore?

    Last night I ran a DNS benchmark test, and a notice popped up saying my ISP was intercepting and redirecting all outgoing DNS requests. I've been using OpenDNS for a year now without any problems, then I found out last night I am not connecting to their servers, so I tried Googles servers, no luck there either.
    I called tech support (several times) and no one could give me a straight answer to my question: Is Verizon not allowing connections to alternate DNS servers anymore? I was forced to switch back to Verizon servers, not happy about that.
    Can someone please answer my question? Thanks.

    I'm on FiOS and I've got no issues using OpenDNS.  I have the Quantum router set to use it.  Works fine.
    I've manually changed DNS on my computer to google's servers.  No problems with this, either.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Is Verizon currently IP blocking japan?

    Is Verizon currently IP blocking certain severs in japan? and if so is there a way to get them to let my connection get through?

    well ive been trying to access some sites that wont load up anymore ive heard that some places in japan and in the US were having DDOS attacks and people theorized this caused some places to be blocked.
    these are some of the few I buy gooods overseas and suck and connecting to relatives
    gs016.pso2gs.net
    210.129.209.16

  • SOLARIS 10 with iSCSI Problem "not a block device"

    Hi Guys.
    I almost reached it to build an iscsi connection with a Netgear readynas 2100.
    But I have still one Point which makes me a Problem!!!
    Everything works, except mounting the device....
    It always Sais me: "not a block device"
    At the bottom you can see an output of the whole configuration that I did.
    Has anybody maybe a tip for me? Thanks in advance, Mischa
    login as: root
    Using keyboard-interactive authentication.
    Password:
    Last login: Fri Dec 18 01:18:30 2009 from pnm
    Sun Microsystems Inc. SunOS 5.10 Generic January 2005
    Sourcing //.profile-EIS.....
    root@sun001 # iscsiadm list discovery
    Discovery:
    Static: disabled
    Send Targets: disabled
    iSNS: disabled
    root@sun001 # iscsiadm modify discovery -s enable
    root@sun001 # iscsiadm modify discovery -t enable
    root@sun001 # iscsiadm modify discovery -i enable
    root@sun001 # devfsadm
    root@sun001 # devfsadm -C
    root@sun001 # ping 172.16.251.215
    172.16.251.215 is alive
    root@sun001 # iscsiadm list discovery
    Discovery:
    Static: enabled
    Send Targets: enabled
    iSNS: enabled
    root@sun001 # iscsiadm add discovery-address 172.16.251.215
    root@sun001 # iscsiadm list discovery-address
    Discovery Address: 172.16.251.215:3260
    root@sun001 # iscsiadm list discovery-address -v
    Discovery Address: 172.16.251.215:3260
    Target name: iqn.2009-12.Z-NAS-B0204:znaszim
    Target address: 172.16.251.215:3260, 1
    root@sun001 # format
    Searching for disks...done
    AVAILABLE DISK SELECTIONS:
    0. c1t60014052E198270014ED001000000000d0 <DEFAULT cyl 65267 alt 2 hd 255 sec 63> znaszim1
    /scsi_vhci/disk@g60014052e198270014ed001000000000
    1. c3t0d0 <DEFAULT cyl 17747 alt 2 hd 255 sec 63>
    /pci@7b,0/pci1022,7458@11/pci1000,3060@2/sd@0,0
    2. c3t2d0 <DEFAULT cyl 17747 alt 2 hd 255 sec 63>
    /pci@7b,0/pci1022,7458@11/pci1000,3060@2/sd@2,0
    Specify disk (enter its number): ^C
    root@sun001 # dev
    devattr devfree devfsadm devinfo devlinks devnm devreserv
    root@sun001 # dev
    devattr devfree devfsadm devinfo devlinks devnm devreserv
    root@sun001 # dev
    devattr devfree devfsadm devinfo devlinks devnm devreserv
    root@sun001 # devfsadm -c iscsi
    root@sun001 # iscsiadm list target -S
    Target: iqn.2009-12.Z-NAS-B0204:znaszim
    Alias: LIO Target
    TPGT: 1
    ISID: 4000002a0000
    Connections: 1
    LUN: 0
    Vendor: LIO-ORG
    Product: FILEIO
    OS Device Name: /dev/rdsk/c1t60014052E198270014ED001000000000d0s2
    root@sun001 # mkdir /export/iscsi
    root@sun001 # mount /dev/rdsk/c1t60014052E198270014ED001000000000d0s2 /export/iscsi/
    mount: /dev/rdsk/c1t60014052E198270014ED001000000000d0s2 not a block device
    root@sun001 #
    -----------------------------------------------------------------

    Ok. Sorry i have to explaine it in an other way.
    The Storage Device is a Netgear Ready NAS 2100.
    Netgear Ready NAS with a Linux os.
    The OS Supports different Protocols like: CIFS / FTP / HTTP/ iSCSI etc...
    Now im trying to use an other protocoll (cifs) to store the data on the Netgear NAS.
    i found smbclient and was able to open a connection to the NAS.
    root@sun001 # /usr/sfw/bin/smbclient //172.20.0.51/video_net -U usrvideo
    Password:
    Domain=[Z-NAS-A0111] OS=[Unix] Server=[Samba 3.4.5]
    smb: \> ls
    . D 0 Tue Feb 23 11:12:04 2010
    .. D 0 Thu Feb 18 10:38:52 2010
    172.22.1.58.lnk A 747 Fri Feb 19 19:18:37 2010
    172.22.1.55.lnk A 747 Fri Feb 19 18:41:07 2010
    65535 blocks of size 33553920. 65535 blocks available
    smb: \>
    Is there a way to mount the smb connection when the server starts up?
    I have to find a way to attach the NAS like a local folder...
    And that is why i choose iSCSI before..
    Regards
    mischa
    Edited by: mischu on Feb 26, 2010 2:34 AM

  • File is not a BLOCK device

    Hi,
    Trying to configure ASM on this device and getting the error:
    eating /dev/oracleasm mount point: /dev/oracleasm
    Loading module "oracleasm": oracleasm
    Configuring "oracleasm" to use device physical block size
    Mounting ASMlib driver filesystem: /dev/oracleasm
    Reloading disk partitions: done
    Cleaning any stale ASM disks...
    Scanning system for ASM disks...
    File "/oracle/asm/disks/nfsdisk1" is not a block device
    File "/oracle/asm/disks/nfsdisk1" is not a block device
    File "/oracle/asm/disks/nfsdisk1" is not a block device
    Cleaning any stale ASM disks...
    Unmounting ASMlib driver filesystem: /dev/oracleasm
    Unloading module "oracleasm": oracleasm
    Loading module "oracleasm": oracleasm
    Configuring "oracleasm" to use device physical block size
    Mounting ASMlib driver filesystem: /dev/oracleasm
    Reloading disk partitions: done
    Cleaning any stale ASM disks...
    Scanning system for ASM disks...
    Reloading disk partitions: done
    Cleaning any stale ASM disks...
    Scanning system for ASM disks...
    File "/oracle/asm/disks/nfsdisk1" is not a block device
    What has been done:
    dd if=/dev/zero of=/oracle/asm/disks/nfsdisk1 bs=8192 count=100000
    100000+0 records in
    100000+0 records out
    819200000 bytes (819 MB) copied, 90.3162 s, 9.1 MB/s
    also:
    /oracleasm configure
    Configuring the Oracle ASM library driver.
    This will configure the on-boot properties of the Oracle ASM library
    driver.  The following questions will determine whether the driver is
    loaded on boot and what permissions it will have.  The current values
    will be shown in brackets ('[]').  Hitting <ENTER> without typing an
    answer will keep that current value.  Ctrl-C will abort.
    Default user to own the driver interface [oracle]:
    Default group to own the driver interface [dba]:
    Start Oracle ASM library driver on boot (y/n) [y]:
    Scan for Oracle ASM disks on boot (y/n) [y]:
    Writing Oracle ASM library driver configuration: done
    Initializing the Oracle ASMLib driver:                     [  OK  ]
    Scanning the system for Oracle ASMLib disks:               [  OK  ]
    not sure what else to do..
    thanks

    Hi,
    To create Oracle ASM disks, there are some steps to do:
    - Have raw Disks, and you don't have then you can create a pseudo disks with the command dd us yours.
    - Install ASMLib
    - Use the /etc/init.d/oracleasm to configure, create ASM disks
    The command dd creates a pseudo-block disk, and this a solution: Create virtual RAW disks for Oracle ASM on Linux with single Hard Drive
    # dd if=/dev/zero of=/asm/disk4 bs=1M count=2000
    # losetup /dev/loop4 /asm/disk4
    # /etc/init.d/oracleasm createdisk ASM4 /dev/loop4
    After the creation, you should scan your ASM disks: Wadhah DAOUEHI - Creation of ASM disks on Oracle Linux using ASMLib
    # /etc/init.d/oracleasm scandisks
    # /etc/init.d/oracleasm listdisks
    Best regards

  • Can't have ASM mark a NFS file as an ASM disk : -is not a block device

    Hello,
    I’m trying to experiment with ASM for learning purpose. Because I don’t have access to a SAN, I am trying to use NFS files but I can’t manage to have ASM mark those files as ASM disks.
    [root@localhost /]# /etc/init.d/oracleasm createdisk ASM_DISK_1 /mnt/asm_dsks/dg1/disk1
    Marking disk "ASM_DISK_1" as an ASM disk: [FAILED]
    The oracleasm log says: File "/mnt/asm_dsks/dg1/disk1" is not a block device
    OK, more context now:
    I am trying to install ASM on a RHEL5 virtual machine (on vmware).
    [root@localhost /]# uname -rm
    2.6.18-8.el5 x86_64
    I followed this document:
    http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html until I got stuck at the following command:
    /etc/init.d/oracleasm createdisk ...
    Now, the NFS filesystem comes from a Solaris 10 system (the only one that's available) running on a physical sun box (this one is not a virtual system).
    I have tried many combinations. I tried creating the files on the linux VM, using dd. As root, as oracle. I tried creating them on the Solaris side, using mkfile... no matter what I try, I always get the same issue.
    I tried to follow this document: Creating Files on a NAS Device for Use with ASM (http://download.oracle.com/docs/html/B10811_05/app_nas.htm#BCFHCIEC)
    But nothing seems to work.
    Any idea, recommendations?
    Thanks,
    Laurent.

    Hi buddy,
    I guess the metalink note 731775.1 should help You.
    In fact the procedure is:
    - Create the disk devices on your NFS directory (using dd)
    - Adjuste the permissions over those files (in this case, oracle:dba)
    - Adjust the ASM_DISKSTRING at the ASM instance and setting the NFS directory in the discovery path
    - Verify if they are available at v$asm_disk view
    - Create the diskgroup using the the NFS disks that You have created.
    Hope it helps,
    Cerreia

  • HT5568 cookies are not being blocked

    This ***** so bad, the cookies on Safari are not being blocked on my Mac Lion 10. 7.5? What's going on. I can be on for 2 minutes and not visit a website but still have 45 cookies including one saved to my local cache. I though Macs were supposed to be better than this.

    Do you have a question?
    If it's about blocking cookies, then may I assume you have disabled all cookies via Safari preferences; that the browser is set to block cookies always?
    If you're concerned about tracking (I don't know why you're asking about cookies), you could choose to enable and use Private Browsing option. 
    Realize too that there are other and very effective ways to track clients without cookies; whether using Flash Cookies or so-called super-cookies or via EFF's Panopticlick techniques.

  • Not allowing block or delete of Customer record via tcode VD02/XD02

    Hi All,
    I want to check on the process of NOT allowing block or delete of a customer record thru tcode VD02/XD02. From a business point, we would like to only use VD05/XD05 to block a customer record and VD06 to mark for deletion. This will allow users to create/change the record using VD02/XD02 and different set of users to have control block/delete.
    Any inputs are appreciated. Thanks.
    Naren

    Hi,
    You will have to discuss this with your Basis team and check if there is any authorization object for that particular functionality in the Transaction.
    As far as i know i dont think it is possible, you can only restrict the users from using particular transactions but not from using a particular functinality in a transaction.
    The best option is to assign alll the Master Data related responsibility to a limited and resposible group of users or discuss with your technical team if they can do some restricting.

Maybe you are looking for