KO88 Layout not displayed

Dear Friends,
When the user is executing the T.code KO88, the sytems does not display any data. It shows like white blank sheet.
When I excute the same T.code in my system with user's login there is no problem, the data is displayed.
In T.code KOB1-Actual Line items, The header data is not displayed in the user system.
But when executed in my system, All the data is displayed.
Please suggest how to solve the problem.
Regards
Sridhar

HI,
looks like authorization concept problem. Check SAPNET note 15211 + related notes, this describes what to do.
Best regards, Christian

Similar Messages

RH 11 Imported Screen Layout Not Displaying in Gallery

Began using a trial of RH11 today and am experimenting with Responsive HTML5. I am trying to understand how to use a newly downloaded/imported screen layout while setting up a new single source Responsive HTML5 layout. I downloaded the screen layout from the Adobe site, which was a single file in a zip file. I unzipped the layout file to the same download folder and imported the extracted file into the Screen Layouts folder in the Project Set-up pod within RH11. Then while working in the Responsive HTML5 Settings window, clicked Gallery and expected to see the newly imported layout as an option there. The layout does not display. The layout name does display under the Screen Layouts folder folder in Project Set-up though.
How do I get the layout to display in the Gallery? I am wondering if I extracted the layout file to the wrong location? Does it have to be extracted to a folder within my project files such as the SSL folder or within the folder to which the RH11 trial software was installed? I assumed the Import process in Project Set-up would copy the layout file to wherever it was needed for it to work in Robohelp.
4/3 addition to original post -- adding a picture for reference regarding where I can't get the new layout to show. WIthout it showing here, how would I go about assigning the layout to my single source layout?
Message was edited by: KFarrelly

Thank you William. After following those steps, I was able to apply a newly downloaded .slz to my desired Responsive HTML5 single source layout.
While I am still not successful in getting the new screen layout to show in the gallery (in window accessed from B below), I was able to see the new screen layout in the Select drop-down list of the Responsive HTML Settings window -- thus mission acomplished! I made my selection from that list to get the desired, new screen layout applied to my project. Thanks so much!

Standard Report's Layout not displaying 'SAVE LAYOUT' Option

Dear All,
Using Tcode VF44, i am getting output list.But in that list when i click on select layout option from toolbar its not displaying 'save layout' Option. can anybody give me soln for the same.How can i get that option?
Regards,
Mayank

HI,
No yaar, This one is standard report and i am getting 'SAVE LAYOUT' option in 300 but not in Production Server.There must be settings for this. If u hv any idea ?
Regards,
Mayank

Phone layout not displaying search icon? Responsive HTML RH11

Hello,
I'm creating Responsive HTML5 output in RH11. I've done considerable editing of the default theme, changing colors and removing the index page and the links to it (we don't include an index). At some point, the phone layout stopped displaying the "magnifying glass" icon next to the TOC/Glossary icons. If you hover over the spot, the hovering icon does appear. I have tried everything I can think about to fix this problem, but can't figure it out. The regular icon is definitely present in the folder, along with the hover version. The css correctly names the icon. I have looked at the MasterThemeSchema.xml and when I fooled around with that, I got two magnifying glass icons to appear, but not one. I have created another Theme1 layout, where the search icon displays correctly, and compared the main.css and MasterThemeSchema.xml line by line. I've compared the language for the TOC and Glossary icons, which appear correctly, to the search icon, and everything looks fine. I've even started all over and modified the Theme-1 layout from scratch. Can anyone give me other ideas to check to get the icon to appear correctly in the phone layout?
Thanks,
Alexandra

Did you add a background to the search field or change anything about
the dimensions of the search?
Do you perhaps have a link to an example output made with the layout? I
could then take a look and see what is going on. That's easier than
trying to come up with sensible ideas. Perhaps you can generate an
example project with the layout (you can export/import them).
Normally, I use the developer tools in browsers to sniff out what
is going on in an example output. That's by far the easiest way to find
out why browsers are not responding the way you expect.
Kind regards,
Willam

WebPart Zone in Page Layout not displaying

I have created a new page layout using Design Manager, two files are created, one HTML file, and the other ASPX file with the same name. You cannot edit the .aspx file directly in SPD, you can only edit the .html file. You will find in the .html all
those ASPX tags commented.
In the HTML file I added a web part zone, I copied a snippet from the design manager, right after a page content snippet. As shown below. Saved and previewed the page with no errors. The Page Content shows up just fine but there is
no WebPart Zone underneath it.? Any Ideas why it is missing?
Thanks

Here is the code, I'm helping Nvr2grateful since he can't post code at the moment.
<div>




<div id="ctl02_label" style="display: none">
Page Content</div>
<div id="ctl02__ControlWrapper_RichHtmlField" class="ms-rtestate-field" style="display: inline" aria-labelledby="ctl02_label">
<div align="left" class="ms-formfieldcontainer">
<div class="ms-formfieldlabelcontainer" nowrap="nowrap">
<span class="ms-formfieldlabel" nowrap="nowrap">Page Content</span></div>
<div class="ms-formfieldvaluecontainer">
<div class="ms-rtestate-field">
Page Content field value. Lorem ipsum dolor sit amet, consectetur
adipisicing elit, sed do eiusmod tempor incididunt ut labore
et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud
exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.
Duis aute irure dolor in reprehenderit in voluptate velit esse
cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat
cupidatat non proident, sunt in culpa qui officia deserunt mollit
anim id est laborum.</div>
</div>
</div>
</div>


</div>
<div data-name="WebPartZone">


<div xmlns:ie="ie">





</div>

</div>
Brandon Atkinson
Blog: http://sharepointbrandon.com

Layout not displaying correctly

Hello!
I have an issue with some standard layouts in my portal (SP20).
The WPC layout home page is defined to have two columns at widths of 75% and 25% respectively, but once it is asigned the page is displaying in two columns of equal width.
In the developement environment the page is displaying ok, but in Production it isn't.
I have already checked the code in the jsp file and I don't see any inconsistences in it.
Could you give me any advice to solve this problem?
Regards!

Solved.
Somehow the WPC standard CSS in Developement and Production systems were different.
Greetings.

Layout not displaying/printing on required pages

Hi,
I am using reports 6i and having a problem with the layout of a report.
The report is made up of one sql query, that returns the data for 14 contracts.
I need the report to produce a cover letter, a contract, a schedule, a contract and a schedule in this order for each contract (so 14*5 layout sections).
eg
contract 1234 letter
contract 1234 contract
contract 1234 schedule
contract 1234 contract
contract 1234 schedule
contract 1235 letter
contract 1235 contract
contract 1235 schedule pg1
contract 1235 schedule pg2
contract 1235 contract
contract 1235 schedule pg1
contract 1235 schedule pg2
and so on
However the schedule on a few contracts expands over more than one page, but because I have set the vertical panels per page = 5, these new pages are causing the second pages of the schedule to be printed out of order and produces blank pages or the
I have tried various things page protects, expanding, anchoring etc, but cannot get this to produce the report correctly.
The report works perfectly if the schedule does not repeat over more than one page.
Any help would be greatly appreciated.
Thanks
Kerry

ok, thanks for the help, just got back to this after a few weeks.
I have tried splitting them into the 3 groups, however this is causing problems as well.
I have had to create the logical page as about 100 high to fit all 5 pages of text into the page and this has caused the 2nd page(contract) being printed half down the page (logical & physical).
How can I then get the page breaks to print at the top of the physical page?
I have had to create 5 repeating frames based on 3 groups in a single query
r_letter
.. R_contract
....R_schedule
..R_contract
....R_schedule
However despite using the page break before set to Yes the logical page is not breaking between the first R_schedule and the second R_contract. I have also tried putting the r_schedule into the R_letter instead of R_contract but the same happens.

Blog layouts not displaying

Good day to all and thank you for your time,
We are unable to get the blog layouts rendering accordingly, it seems to be a conflict with BC css and our own CSS.
Nevertheless, was hoping if anyone might have ideas in into helping us resolve this issue?
Here is the link
http://www.unilevelstudios.com/web-design-and-development/good-logo-design
I've also looked at other blog post but no resolution found, thank you for all your help.
https://forums.adobe.com/thread/1219155?q=blog%20not%20showing

Hi there, if you view the console you can see lots of errors trying to load files and not able to.
If you look at the path of these you can see it is looking for your functions.js for example here:
http://www.unilevelstudios.com/web-design-and-development/js/functions.js
The reason is you have your files like this:
<script type="text/javascript" src="js/functions.js"></script>
Every script call and css and image ALWAYS needs to start with a forward slash ( / ) which means - Read from the root. Your issue is not the same as in that other thread.

BPS Layouts not displaying in the CRM Portal

HI Friends,
I have configured Layouts in the BPS, i added 0keyfg_flag in the layout and enahced the layout in the UPX_MNTN and in the CRM system maintain RFC destination and assigned planning profiles to planning profiles gropu also, all the steps i fallowed which are mentioned in the " How to integrate bps layouts in the CM portal". when i looked at in the crm UI i don't find the layouts diplayed in the CRM portal, but CRM UI recognizeing the BPS variables which are used in the BPS planning levels,
but i don't see the any layouts in the CRM front end, if anybody has any expericence please share your ideas, how to solve the issue.
Thanks
Best regards
SG

Hi SG,
Its good that you are able to assign the planning profiles created at bw end in CRM system to ur planning groups. But I am stuck here itself.
My problem is what ever the planning profile I had created in SEM BPS (BW System component version BW 7.,4) using BPS0 t-code, I am unable to retrieve the same in CRM system while trying to assign the same to the planning group.
At CRM end, In the below navigation i.e SPRO->CRM->Define Transaction types-> created & then while assigning the Planning profile in SEM Planning tab, I am unable to retrieve the ones I had created in BW-BPC (BW 7.4).
Could you pls let me know what I would be missing here.
We are in very beginning stage i.e testing the connections & communications for CRM & BI Integration, yet to start the configuration of TPM in CRM.
Thanks.

Windows 8 Pro tablet - Syclo screen layout not displayed properly data entry

Hi Team,
We are working on the windows 8 pro tablet to test the standard
service manager 4.2 application
During the testing in windows 8 Pro tablets, when we want to enter any data in syclo screen with the help of tablet’s keyboard, the input
fields becomes so small that we are not able to enter the data.
Is there any configuration which can be done so that the screen isclearly visible when data entry is made in the syclo screen.
If anyone has faced similar issue please share how to over come this.
Please advice
Thanks
Neha

Hello Phil,
Command bars were deprecated and shouldn't be used any longer. Instead, you need to use the Fluent UI (aka Ribbon UI) instead. You can read more about the new UI in the following series of articles in MSDN:
Customizing Context Menus in Office 2010
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)
As a workaround you can add a custom control to the context
menu with the getEnabled or getVisible callback which will be invoked before the context menu is shown.

Data not display in background layout

Hi Expert,
This is regarding screen layout.
FBL3N report.... I have create new layout for report FBL3N. when i run the report in foeground all data display in proper layout.
But when i run this report in Background two fields are not display in layout.
Please suggest me whern i do the changes....
Regards
PK.

I think you should change the forum if you are asking Finance module related qwuestions.

Standard Report not Displaying 'SAVE LAYOUT' Option

Dear All,
Using Tcode VF44, i am getting output list.But in that list when i click on select layout option from toolbar its not displaying 'save layout' Option. can anybody give me soln for the same.How can i get that option?
Regards,
Mayank

hi ,
it depends on the user parameters.
U have to identify the parameter id and u have to activate it in user maintainance partameters .
su01 -> parameters.
ex . parameter id -> SD_VARIANT_MAINTAIN -> X
so u can save layout now.
regards,
manikandan

Div options toolbar not displayed correctly in fluid grid layout

When I select an inserted element in fluid grid layout, the options to hide, duplicate or delete the Div are not displayed. I only have the 'move up a row' arrow displayed. How do get the other options to display on the mini toolbar? My DW CS6 version is V12.0 Build 5861.

It is called as the 'Smart HUD' and was made available in 12.2 CCM (Creative Cloud) update. Your version is 12.0 which looks like a regular non-cloud license.
Are you actually a Creative Cloud subscriber? If not, you'll have to wait for a perpetual license upgrade in order to see/ use this feature.

Abap webdynpro layout and application not displayed

Hi Gurus ,
    We have upgraded the SAP HR system from ECC6.3 to ECC6.4 and netweaver from 7.0 to 7.1 .
    Following are the list of error in EHP4 system ,
                1) Layout of ABAP Webdynpro Component are not displayed .
                2) Any ABAP WEBDYNPRO Application is not displayed by tesing in SAP-R3 and also in ESS .
    error are as follows while trying to view layout in abap webdynpro application :
    http://dv.hr.co.in:4567/sap/bc/wdvd/painting.html?_vdrespkey=4IS29CT7NDRIOI511AFI0R1E3&_vdframe=painting&sap-client=435
      If any one have information for this kindly let me know .
Thanks :
Vishwas
Edited by: vishwassap on Aug 12, 2010 7:17 AM

Hi,
   Thanks for reply ,
   Above mention is not link ,its an error in pop up inside layout of view .
I resolve this problem by deploying mime object by program in R/3 , so that i can able to view layout .
But still application is not displayed it shows error like
1) 'UCF_LoadingPlaceHolder' is undefinged by testing through R/3 and starting view is not opened .
2) 'UCF_Image' is undefined by testing through portal but starting view is opened here .
3) while navigating from one view to any view or window is not possible , it gives error
4) When I navigate from one view to other .
The following error text was processed in the system D36 : The ASSERT condition was violated.
The error occurred on the application server RELSRMSR2_D36_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DISPATCH_NW7_EVENT of program CL_NW7_VIEW_ELEMENT_ADAPTER===CP
Method: IF_WDR_CLIENT~GET_CLIENT_UPDATES of program CL_WDR_CLIENT_SSR_LS==========CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Edited by: vishwassap on Aug 13, 2010 8:31 AM

Abap wd layout and application not displayed

Hi Gurus ,
We have upgraded the SAP HR system from ECC6.3 to ECC6.4 and netweaver from 7.0 to 7.1 .
Following are the list of error in EHP4 system ,
1) Layout of ABAP Webdynpro Component are not displayed .
2) Any ABAP WEBDYNPRO Application is not displayed by tesing in SAP-R3 and also in ESS .
error are as follows while trying to view layout in abap webdynpro application :
http://dv.hr.co.in:4567/sap/bc/wdvd/painting.html?_vdrespkey=4IS29CT7NDRIOI511AFI0R1E3&_vdframe=painting&sap-client=435
If any one have information for this kindly let me know .
Thanks :
Vishwas

Hi,
Thanks for reply ,
i am trying to resolve issue and not to confused people anyway ,
I resolve half problem by deploying mime object by program in R/3 , so that i can able to view layout .
But still application is not displayed it shows error like
1) 'UCF_LoadingPlaceHolder' is undefinged by testing through R/3 and starting view is not opened .
2) 'UCF_Image' is undefined by testing through portal but starting view is opened here .
3) while navigating from one view to any view or window is not possible , it gives error
4) When I navigate from one view to other .
The following error text was processed in the system D36 : The ASSERT condition was violated.
The error occurred on the application server RELSRMSR2_D36_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DISPATCH_NW7_EVENT of program CL_NW7_VIEW_ELEMENT_ADAPTER===CP
Method: IF_WDR_CLIENT~GET_CLIENT_UPDATES of program CL_WDR_CLIENT_SSR_LS==========CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Edited by: vishwassap on Aug 13, 2010 8:28 AM

KO88 Layout not displayed

Similar Messages

Maybe you are looking for