KO8G-sudden surge of error mess(Maintain the settlement rule of the sender)

hi!
we encountered a lot of error message(Maintain the settlement rule), more than 4k, after we run KO8G, this is the first time happened to us. when we checked the PM orders from the error message, most of it came from previous periods even previous years, which are already closed. we can understand if there are posting for the said order for the period, but there is none. why those closed orders with no postings, still read by the settlement? were having a diffuclty of checking it one by one, we only expect less than 100. we hope you can help us.
thanks in advance
vince

Dear,
As found...
Maintain only the FROM DATE... Remove the TO DATE as 10.2010 (Extend the TO DATE)
OR
Create a new settlement rule which is valid in the Period of Execution of settlement
Regards,
Syed Hussain.

Similar Messages

Error while maintaining the Update Rules for the Infostructure

Hi,
I have added 2 new characteristics for the existing infostructure S9xx and executed the same. While maintaining the Update Rules for the same, system is giving the error message 1. "Field 'PARVW' unknown" and 2. Error generating program RMCX0011.
Please guide me in resolving the issue.
Thanks & Regards,
Kumar.

Hi,
This is with reference to my earlier question that an error is occuring while maintaining the update rules for the existing Infostructure.
Solution provider for this will be rewarded with good points.
Regards,
Kumar.

Error saying "Enter the sender activity type also"

While trying to upload the HR details from NON SAP to SAP through SE38, an error reflects asking to enter the sender activity type.
Can any body help me.

Hi,
Please refer to the online documentation help whose link is listed below :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c3/c6c2a40f4f11d2956400a0c930669b/content.htm
This link mentions four different data entry scenarios that can be configured for data entry profile in CATS.
if you want to have the activity transfered to HR, you have to activate this Controlling object for pers. cost assignment in your
customizing:
- Personnel Time Management
- Time Data Recording and Administration
    - Integrating Time Management with Other R/3 Applications
      - Recording Personnel Costs
        - Enter Controlling objs permitted for pers. cost assignment
here you can find in the documentation:
'In this step, you specify which Cost Allocation or Funds Management objects the personnel costs can be assigned to.
and, in addition, for account assignment to activity type:
COBL-LSTAR Activity type
   In cac1 'cost accounting variant' is set to 'Assignment of personnel costs to master cost center'. In this case, the cost center is not transferred to HR. Activity allocation is done directly from cats through the other (non-hr) components. Check for 'activity allocation' in the online documentation.
the cost assignment variant 'B' (Assignment of personal costs to sender) needs a receiving accounting object.
If there is no receiving object the cost assignment variant changes to '0'.
regards
Waman

Xtrememusic - a sudden code 10 error after installing the newest dri

I have been using the Xtrememusic for about two years and it has no problem at all until I tried to install the newest update.
It worked for about two days normally after the update before the code 0 error(this device cannot start)?appeared.
I've tried many methods, tried rolling back drivers, reinstalling drivers, etc. I have even used driver sweeper to clear all Creative's drivers but it'sjust didn't?work again.
Right now I can't even install the drivers which came from the CD
Is my card being killed by the new driver or what?
I am no experts in computing and any help would be greatly appreciated!
Here's my basic specs:
MB: Asus P5GD-VM
Ram:.5GB
Display card: ATI X600XT
Sound card: Xtrememusic with digital i/o connected

below address for your reference~
http://www.wretch.cc/blog/rogerpan96/2346306
this is the way to?remove?all creative driver files from system completely
. download the updated driver file from Creative website
2. extract the file with winrar kind application
3. find the "Setup" on the "Driver" folder, double click it
4. check options, "Driver Uninstallation" and "Delete all shared Creative audio driver files", click "OK"

Help. I am all of a sudden having download errors and get the message /Users/MWP/Downloads/PFMS_vball_sched-4.pdf could not be opened, because an unknown error occurred. Try saving to disk first and then opening the file.

This happens regardless of the pdf file I am trying to open within a page using Firefox. My version of Firefox is updated (3.6.13). Please help!

Please install the following add-on to see if it helps.
https://addons.mozilla.org/en-US/firefox/addon/pdfjs/

System error info to the sender application

Please check the link that you have given.

sorry for skipping this word that..after trying the blog our case isnt working,
when executing sceario with incorrect server address, it fails giving 2 mesg;
1.response mappin error
2.server error
but at sender only mapping error is transmitted
thanks

Error - Maintain the entry CAMGB VCNYR in V_T7PIQSWITHCVAL - Campus mgt

While saving student record (Transaction : PIQST00) system throws an error message "Maintain the entry CAMGB VCNYR in V_T7PIQSWITHCVAL " though I am not doing/have not done any GB(Great Britain) specific configuration. Can any one throw light on why its happening and how to correct this.
Regards,
Krishna Mohan

Hi,
Pl check the country of university in students basic settings. the setting by default here is 'GB' ..... let me know if you could resolve this.
Warm Regards,
Sravan V

Maintain the acct key and accruals/provisions in the calculation schema

Dear All,
I have a problem during invoice posting.
I create a new freight condition type & assigned it to the calculation schema. I also create a new account key & assigned to the calculation schema in accrual keys. Then done OBYC settings. During MIGO, its working fine. But when i post the Miro against po, giving an error msg., "Maintain the acct key and accruals/provisions in the calculation schema, Message no. M8434"
plz help me to solve this issue.

Have you ticked the 'Acruals' in control data 2 in M/06 for this condition.
Regards,
Piyush

"An error occured saving the ActiveX control"

I pulled up an old LabVIEW program today
that I used to work on under Win-NT.
Now I use Win-XP.
We're talking about LabVIEW 5.1.1 on this program.
The program suddenly throws
"An error occured saving the ActiveX control"
when I try to save the program.
Never saw this under NT.
Anybody knows what this is about ?
Martin

Thanks for posting but we need more information.
Do you have activeX controls in the VI? Are you using 3d graphs? Does the VI run on XP? What version of LabVIEW do you have?

Please maintain the master data for material during product cost collector

hi
i get a error
please maintain the master data for material during product cost collector
please guide me
regards
leo

Hi Leo,
Can you elaborate your issue, like when did you get the error exactly?
If it is the error you got while creating Product Cost Collector, then this is not the right Forum to post.
Please post your question in the 'ERP Manufacturing (PP)' forum
Regards,
Manimaran M

Error-M2O-Settlement rule for assembly order for item...could not be genera

Hi,
When I am creating Sales Order (VA01) for M2O, I am able to do the costing and copy the EK02 condition type. I have verified the the incompletion log, it indicates that document is complete.
But while saving the sales order, the below error message is displaed:
Settlement rule for assembly order for item 000010 could not be generated. Should the order still be saved?
                Yes/No
1. If No is choosen the following error message is displayed
       Error when processing Production order
      Error when processing Production order
      Message no. V1380
      Diagnosis
        A technical error has occurred. On calling up the assembly interface, exception 5 was triggered. The exceptions have the following meanings:
1 = External block, 2 = General error, 3 = Insufficient data for the interface, 4 = Order was not found, 5 = Update has been rejected, 6 = Final document number for Production order is not issued. Procedure: Inform your system administrator.
2. If Yes is choosen, it is creating Production Order without settlement rule. Able to perform GI & Gr. If I try to enter settelement rule (Settlement receiver SDI - Sales document item) in production order (CO02), the belwo error message is displayed
"Distribution rule for Sales document item can only be created automatically Message no. KD063"
We are using the requierement class with below details:
Reqmts class: ZSO- for M2O
AAC = E, Valuation = A, Settlement profile =SD1, RAKey = 000004, Assembly type = 3.
Settlement profile contain:
Allocation structure, PA structure, Default object type = SDI. Valid receivers: Optional -Sales Order / Prof. seg.
If I make the Valuation field as blank in Reqmts class, there is no error while creating Sales order. And also Settelemnt rule with sales document item as receiver is successfully creating for the production order. Since the Valuation is blank in requirement class, it is Non valuated Sales order stock. All GIs & GR are non valuated
The business requirement is it should be valuated sales order stock and the production varinaces has to be settled to Sales order. Then Sales order has to be settled to COPA.
Need your valuable inputs to meet this requirement.
Let me know if you need any further details.
Thanks in advance.
Regards,
ADI

Dear SAP PP Consultant ,
What is the strategy group you are maintained in the material master ?

Maintain settlement rules for order category 30(Maintenance order).

Hi Gurus,
Can we maintain two settlement rules for an order without distribution rule?
Eample:- In an order there are three different costs i.e. material cost,external labour cost and internal labour cost.We want to settle the material cost and external labour cost to Profitability segment and the internal cost to a particular GL account directly.
Note: No distribution rule is required,because all the cost should settle directly to correspoanding heads i.e. PSG or GL.We don't want to assign the GL# again and again for different orders in the corresponding order's settlement rule.
Require your valuable inputs to proceed.
Best Regards,
Ramakanta

Hi Govardhan,
If you are working in ECS, the Shopping cart will not create any follow on document in backend R/3.
I think your Product category is 30, thats why the error says Manual reservation for order category 30 is not allowed.
Where did you get the maintenance order? Generally maintenance order is created in the backend R/3 (Plant Maintenance) and a P.R will get generated against that order.
Using PDP (Plan driven procurement) you can transfer that P.R to SRM and can carry out sourcing and can complete the procurement cycle.
Can you please tell me what is your exact business requirement?
Hope this will make you more clear.
Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

VA02 - maintain settlement rules

Hi folks,
I am trying to maintain a settlement rule within the Sales Order without the user going to the Item Level.
I want to inherit the WBS element from the Header VBAK and on the save of the document automatically create the settlement rule.
I have tried K_SETTLEMENT_RULES* functions and cant seem to get them to work.
Anyone got any ideas or any advice on this ?
Regards
Gary

I managed to work this one out myself, but just in case someone else has to do it. here is how I acheived it.
Firstly set up all fields on COBRA and COBRB, then call FM
             CALL FUNCTION 'K_SETTLEMENT_RULE_FILL'
               TABLES
                 I_COBRA       = lt_cobra
                 I_COBRB       = lt_cobrb.
Next
           For some reason the internal system ALWAYS sets the table
           up as the update status, this causes problems on creation,
           so we have to change to Insert status.
             Assign (c_GT_cobrb) to <fs_cobrb>.
             if <fs_cobrb> is assigned.
               LT_COBRB_BT[] = <fs_cobrb>.
               loop at lt_cobrb_bt.
             Somehow the previous records are being kept in so have to
             delete them or else prog falls over.
               if lt_cobrb_bt-objnr <> lv_objnr.
                 delete lt_cobrb_bt.
               endif.
               check to see if record exists.
                 select count(*)
                 from cobrb
                 where objnr = lt_cobrb_bt-objnr
                 and   bureg = lt_cobrb_bt-bureg
                 and   lfdnr = lt_cobrb_bt-lfdnr.
                 if sy-subrc <> 0.
                 Set the flag to be insert instead of U
                   lt_cobrb_bt-uflag = 'I'.
                   modify lt_cobrb_bt.
                 else.
                 If settlement exists then exit.
                   lv_settl_exist = 1.
                   exit.
                 endif.
               endloop.
              If settlement exists then exit.
                if lv_settl_exist = 1.
                  exit.
                endif.
                <fs_cobrb> = LT_COBRB_BT[] .
             endif.
           For some rreason the internal system ALWAYS sets the table
           up as the update status, this causes problems on creation,
           so we have to change to Insert status.
             Assign (c_GT_cobra) to <fs_cobra>.
             if <fs_cobra> is assigned.
               LT_COBRa_BT[] = <fs_cobra>.
               loop at lt_cobra_bt.
             Somehow the previous records are being kept in so have to
             delete them or else prog falls over.
               if lt_cobra_bt-objnr <> lv_objnr.
                 delete lt_cobra_bt.
               endif.
               check to see if record exists.
                 select count(*)
                 from cobra
                 where objnr = lt_cobra_bt-objnr.
                 if sy-subrc <> 0.
                 Set the flag to be insert instead of U
                   lt_cobra_bt-uflag = 'I'.
                   modify lt_cobra_bt.
                 else.
                 If settlement exists then exit.
                   lv_settl_exist = 1.
                   exit.
                 endif.
               If settlement exists then exit.
                 if lv_settl_exist = 1.
                   exit.
                 endif.
               endloop.
                <fs_cobra> = LT_COBRa_BT[] .
             endif.
Then when the tables have had their update status amended then call FM
             CALL FUNCTION 'K_SETTLEMENT_RULE_SAVE'
               EXPORTING
               DIALOG                  = ' '
                 OBJNR                   = lv_objnr
                I_STATUS_UPDATE         = ' '
              EXCEPTIONS
                NO_RULE_FOR_OBJNR       = 1
                OTHERS                  = 2.

I was at 30% on the arvato downloader and it messed up, suddenly sent a error message and said "download canot continue, plese contact adobe support" I have been sitting here for 2 hours dowloading. I am upset. I didnt pay over 100 bucs not to be able to

I was at 30% on the arvato downloader and it messed up, suddenly sent a error message and said "download canot continue, plese contact adobe support" I have been sitting here for 2 hours dowloading. I am upset. I didnt pay over 100 bucs not to be able to use it. I have customers waiting!! what do I do???

You can have direct download from this link:
<Download Photoshop Elements products | 13, 12, 11, 10>
Make sure you select the correct version for your operating system. You also need to have a reasonably faster reliable Internet connection.
Good luck.
elemntsmessup=upset wrote:
I was at 30% on the arvato downloader and it messed up, suddenly sent a error message and said "download canot continue, plese contact adobe support" I have been sitting here for 2 hours dowloading. I am upset. I didnt pay over 100 bucs not to be able to use it. I have customers waiting!! what do I do???

All of a sudden I'm getting a 'itunes.exe - system error It says the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. I have tried to reinstall and still can't open itunes. help!

all of a sudden I'm getting a 'itunes.exe - system error It says the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. I have tried to reinstall and still can't open itunes. help!

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

KO8G-sudden surge of error mess(Maintain the settlement rule of the sender)

Similar Messages

Maybe you are looking for