Kobo Player 1.3.1 throwing errors in 2.0

My Kobo player worked great in version 1.0.8 - upgraded to 2.0 last night and suddenly I get an error when trying to turn a page..JavaScript Alert - "touchend:Not enough arguments". Any thoughts?

Re: Kobo version. It is odd, because now that you have me thinking about it, I think it was already there when i got the pb. I don't remember downloading it, but I do remember my libray was there as soon as I signed in. I just tried it again when I read your post about it, then checked the version number.
My PB is a 16gb, and I got it for Christmas. I'm not sure when it was purchased. It had NFS. As far as I can tell I didn't lose anything during the upgrade. Which is good, because I didn't bother to back it up I was in such a hurry.....

Similar Messages

Filereference 'save' throws error

i have a code which saves a display object locally as an image file, but at some point it began throwing error 2174 (up until then it worked fine).
this code is called either from a context-menu click event or a keyboard event.
    var sourceBmd:BitmapData = new BitmapData(displayObject.width,displayObject.height);
    sourceBmd.draw(displayObject,new Matrix(displayObject.width,0,0,displayObject.height));
    var jpgEncoder:JPGEncoder = new JPGEncoder(80);
    var byteArray:ByteArray = jpgEncoder.encode(sourceBmd);
    try
        filereference.save(byteArray,"posterImage.jpg");
    catch (e:Error)
        Debugging.alert("error: ",e.message);
as you can see, the filereference has only a single action - so no reason for error 2174 to be thrown (and yes - i also have a listener for the 'cancel' event).
in case you wonder - i'm publishing for flash player 10.0
any ideas?
cheers,
eRez

from file reference docs
Note that because of new functionality added to the Flash Player, when publishing to Flash Player 10, you can have only one of the following operations active at one time:FileReference.browse(), FileReference.upload(), FileReference.download(), FileReference.load(), FileReference.save(). Otherwise, Flash Player throws a runtime error (code 2174). Use FileReference.cancel() to stop an operation in progress. This restriction applies only to Flash Player 10. Previous versions of Flash Player are unaffected by this restriction on simultaneous multiple operations.
I know you said you are publishing it with Flash Player 10 but what version of flash player are you running it in (not necessarily the same you are publishing it with? are you running it in the standalone or browser plugin?
FileReference was added in flash player 9 while FileReference.save() wasn't added until Flash Player 10
http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html
if you are certain all of the above is ok then what happens if you add
fileReference.cancel(); above your filereference.save()
Another thought, so you have the saved jpg open in another application?

Flash player plugin _12_0_0_77.exe - application error in win 7

How to solve flash player plugin _12_0_0_77.exe - application error in win 7?

You get this when doing what? Is there any additional information in the message?

PL/SQL throwing errors! trying to alter dates

the following code keeps throwing errors, I was wondering if it is due to me getting confused when to use ":" before a variable and also ":=" when setting values?
Can anyone see what I am doing wrong?
Here is the code, at the moment it is throwing an error on line 44
ORA-06550: line 44, column 1:
PLS-00103: Encountered the symbol "" when expecting one of the following:
CODE.....
DECLARE
     QNStart DATE;
     QNFinish DATE;
     Q1Start DATE;
     Q1Finish DATE;
     Q2Start DATE;
     Q2Finish DATE;
     Q3Start DATE;
     Q3Finish DATE;
     Q4Start DATE;
     Q4Finish DATE;
     Q5Start DATE;
     Q5Finish DATE;
     QNT NUMBER;
     Q1T NUMBER;
     Q2T NUMBER;
     Q3T NUMBER;
     Q4T NUMBER;
     QNR NUMBER;
     Q1R NUMBER;
     Q2R NUMBER;
     Q3R NUMBER;
     Q4R NUMBER;
BEGIN
     case current_date
          when current_date between to_date('01-JAN', 'DD-Mon') AND to_date('31-MAR', 'DD-Mon') then
                    QNStart := to_date('01-JAN', 'DD-Mon');
                    QNFinish := to_date('31-MAR', 'DD-Mon');
          when current_date between to_date('01-APR', 'DD-Mon') AND to_date('30-JUN', 'DD-Mon') then
                    QNStart := to_date('01-APR', 'DD-Mon');
                    QNFinish := to_date('30-JUN', 'DD-Mon');
          when current_date between to_date('01-JUL', 'DD-Mon') AND to_date('30-SEP', 'DD-Mon') then
                    QNStart := to_date('01-JUL', 'DD-Mon');
                    QNFinish := to_date('30-SEP', 'DD-Mon');
          when current_date between to_date('01-OCT', 'DD-Mon') AND to_date('31-DEC', 'DD-Mon') then
                    QNStart := to_date('01-OCT', 'DD-Mon');
                    QNFinish := to_date('31-DEC', 'DD-Mon');
     End Case
:Q1Start := ADD_MONTHS(:QNStart,-3);
:Q1Finish := ADD_MONTHS(:QNFinish,-3);
:Q2Start := ADD_MONTHS(:QNStart,-6);
:Q2Finish := ADD_MONTHS(:QNFinish,-6);
:Q3Start := ADD_MONTHS(:QNStart,-3);
:Q3Finish := ADD_MONTHS(:QNFinish,-3);
:Q4Start := ADD_MONTHS(:QNStart,-4);
:Q4Finish := ADD_MONTHS(:QNFinish,-4);
:Q5Start := ADD_MONTHS(:QNStart,-5);
:Q5Finish := ADD_MONTHS(:QNFinish,-5);
select COUNT(COUNT(*)) INTO :Q1T from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :Q1Start AND :Q1Finish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q2T from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :Q2Start AND :Q2Finish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q3T from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :Q3Start AND :Q3Finish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q4T from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :Q4Start AND :Q4Finish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :QNT from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :QNStart AND :QNFinish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q1R from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN Q1Start AND Q1Finish
AND a.COMPANY_NAME IN
     (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
     WHERE f.DATE_ENTERED BETWEEN Q2Start AND Q2Finish
     AND a.ACTION_SCORE = 'Y'
     AND f.INPUT_TYPE = a.ACTION_NAME
     GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q2R from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN Q2Start AND Q2Finish
AND a.COMPANY_NAME IN
     (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
     WHERE f.DATE_ENTERED BETWEEN Q3Start AND Q3Finish
     AND a.ACTION_SCORE = 'Y'
     AND f.INPUT_TYPE = a.ACTION_NAME
     GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q3R from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN Q3Start AND Q3Finish
AND a.COMPANY_NAME IN
     (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
     WHERE f.DATE_ENTERED BETWEEN Q4Start AND Q4Finish
     AND a.ACTION_SCORE = 'Y'
     AND f.INPUT_TYPE = a.ACTION_NAME
     GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q4R from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN Q4Start AND Q4Finish
AND a.COMPANY_NAME IN
     (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
     WHERE f.DATE_ENTERED BETWEEN Q5Start AND Q5Finish
     AND a.ACTION_SCORE = 'Y'
     AND f.INPUT_TYPE = a.ACTION_NAME
     GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :QNR from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN QNStart AND QNFinish
AND a.COMPANY_NAME IN
     (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
     WHERE f.DATE_ENTERED BETWEEN Q1Start AND Q1Finish
     AND a.ACTION_SCORE = 'Y'
     AND f.INPUT_TYPE = a.ACTION_NAME
     GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
EXECUTE
Cheers
Simon

Dave had given you already some good advice.
Your code is not only too complicated, but you have also probably a bug in it. You have for instance a QNstart as to_date('01.01, 'dd.mm') and a corresponding QNfinish as to_date('31.03', 'dd.mm'). As this means, it is the time portion at 00:01, you are missing the complete last day of this interval. So you better do:
declare
l_QNstart      date;
l_Q1start      date;
l_Q1finish     date;
l_q1t          number
begin
l_QNstart := trunc(sysdate, 'Q');
l_Q1start := add_months(l_QNstart, -3);
l_Q1finish := l_QNstart;
-- your condition is now
select count(count(*))
into   l_q1t
from   ff_actions f, ff_action_type_lov a
where f.date_entered >= l_Q1start and f.date_entered < l_Q1finish
and    a.action_score = 'y'
and    f.input_type = a.action_name
group by f.company_name;
end;
/Message was edited by:
Leo Mannhart
btw: what is the difference between Q1Start / Q3 Start and Q1Finish / Q3Finish resp.?

Report throwing error

Hi BI Experts,
I have an issue in the report output. The query is giving the data but the report is not showing the same.
when nonexisting values are given, report is throwing ERROR instead of giving blank page. Client is expecting blank page or dummy page with tables or headings etc but not the error message.
Please suggest a solution for this.
Let me know if anybody needs any other information regarding this.
Thanks in advance.

you need to use no data found logic in order to get blank or any message saying no data found for that selected value.
check this link
https://blogs.oracle.com/xmlpublisher/entry/no_data_found
or
send me your sample xml having data and no data and template i can try at my side. email: [email protected]
assign me some points if helpful

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

Function module throwing error from work area. Cannot find the problem...

REPORT ZPSMARTFORM1.
tables: zptable1.
types: begin of ty_zptable1,
      f1 type zf1,
      f2 type zf2,
      f3 type zf3,
end of ty_zptable1.
data: itab type table of ty_zptable1 with header line.
data: wa type ty_zptable1.
select f1 f2 f3 from zptable1 into table itab.
CALL FUNCTION '/1BCDWB/SF00000005'
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    ITAB                       =   .
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
this is my driver program.In my form interface there are tables,import,export are there where i have to declare tables data.If i am putting wa means it is throwing error.Please show me the clear information.
Edited by: Julius Bussche on Nov 14, 2008 10:09 AM

REPORT ZPSMARTFORM1.
tables: zptable1.
types: begin of ty_zptable1,
f1 type zf1,
f2 type zf2,
f3 type zf3,
end of ty_zptable1.
data: itab type table of ty_zptable1 with header line.
data: wa type ty_zptable1.
select f1 f2 f3 from zptable1 into table itab.
CALL FUNCTION '/1BCDWB/SF00000005'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
ITAB = .
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Plz for this driver program. Give me the exact solution.I am passing the information like itab like zptable1 ther ein the smart form table. Even now i am getting error.Here in this driver program i passed itab = itab means .I am not getting solution.If i have to change any function module name means plz tell me.What i have to put there.Plz give me the correct solution

SSRS dataset throws error when another stored procedure is called inside dataset stored procedure

Hello;
I am using Report Build 3.0, I have a simple report which gets data using dataset which is created from a Stored Procedure. I have another stored procedure which updates the data in the table which is used for the report. I want to get the live data on report everytime
the report is run so that I call that stored procedure (sp_updatedata) inside my report dataset stored procedure and here where my report fails as it throws error while creating dataset.
Here is sample:
sp_updatedata (this only returns "Command(s) completed successfully"
Create Proce sp_getReportData
As
Begin
Exec sp_updatedata -- I call it to update the data before it displays on the report
Select * from customers
End
If I remove this line it works.
Exec sp_updatedata -- I call it to update the data before it displays on the report
Thanks
Essa Mughal

Hi MESSA,
According to your description, you create a dataset based on a stored procedure. In this procedure, it calls another procedure. Now it throws error when creating dataset. Right?
In Reporting Services, when creating dataset, all the query or stored procedure will be executed in SSMS. So if the procedure can be executed in SSMS, it supposed to be working in SSRS. However, it has a limitation in SSRS. In a dataset, it can only return
one result set.
In this scenario, I don't think it's the issue of calling other procedure inside of procedure. Because we tested in our local environment, it works fine. I guess the sp_updatedata returns a result set, and the "select * from customers" returns
another result set. This might be the reason cause the error.
Reference:
Query Design Tools in Report Designer SQL Server Data Tools (SSRS)
Reporting Services Query Designers
If you still have any question, please post the error message and the store procedure (sp_updatedata).
Best Regards,
Simon Hou

Throwing error message for a component

I have a form in which there are several fields. One of field is LOV for which i do some validation on valuechangeListener. If that validation fails, i send error to the form for that particular field. It is working fine. but after this if user submits the form, it is submitted. In case of validation failed by framewrok, it is not submitted. HOw i can set that component in error state so that form is not submitted. I am using following code to throw error or component:
FacesMessage msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, null, "Invalid value");
FacesContext context = FacesContext.getCurrentInstance();
context.addMessage(binding.getClientId(context), msg);
I am using Jdeveloper 11g with latest patch set of ADF i.e. 11.1.3.x

Hi,
actually you are not throwing an error but set a message to display to the user. Can't you just create a validation for the input field. The field has a property for you to define a managed bean validation reference. You can generate the method skeleton from JDeveloper.
Frank

WebI report throwing error when migrated from XIR2 to XI3.1

I have some webi reports built in BO XIR2 on OLAP universes (SAP BW3.5 based). Recently I have migrated the reports from old XIR2 environment to a new XI3.1 environment.
The specification of new system is as below:
BO XI3.1
SAP BW 3.5
No SP and FP is installed. (Actually when I tried to install the SP2, it failed)
After the migration, some of my reports are running for 5 minutes and then throwing an error like below:
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. See RFC trace file or SAP system log for more details. (WIS 10901).
The same report is working fine in old system.
Has anyone faced this problem yet?
Regards

Hi Jacques,
The transports are already imported.
What I can see is if there is a query with only dimension objects and no measure, then that is throwing error in XI3.1. But the same query is running fine in XIR2.
Any Idea?
Thanks and Regards

Database.LoadDataSet() method throwing error while retriving data from IBM DB2 database

Database.LoadDataSet() method is throwing error during retriving data from empty table of IBM DB2 database. It is giving error code "SQL0100W".
“Error Message: 0NO_DATA [02000] [IBM] [DB2 / NT] SQL0100W FETCH, whether there is a line to be UPDATE or DELETE, or of the query result is an empty table .
SQLSTATE = 02000”

Hello SharayuPandit,
For issues regarding DB2, i suggest that you could post it to DB2 related forum:
https://www.ibm.com/developerworks/community/forums/html/forum?id=11111111-0000-0000-0000-000000000842
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The video player is in the connection error state.

Flash cS 5.5 / Win 7. Inserting video into movieclip both with 'import video' wizard and via component. FLV that plays fine on a number of different servers. On opening (after gathering metadata) the message 'The video player is in the connection error state. It enters this state when a video stream attempted to load but was unsuccessful. There are two possible reasons for the error: no connection to the server or the stream was not found.' Firstly I am treating this as a progressive download, not streaming. Second this plays fine locally, it's only when I upload to a server it fails. The FLV is in a folder directly below the SWF. Result is same with FLV in same location as SWF. MIME type set to vide/x-flv although I've also set it to applicaiton/octet-stream.
This is a very basic requirement to call the video directly from Flash, the default parameters of the component are adequate and work locally. However the video does not play. Is it fair to assume this functionality simply does not work correctly within Flash CS5.5? I'm unclear as to what >less< I could be doing with this file.

You can place the Flash and any Flash assets in any folder location that you want.... provided that you understand how Flash assets (like .flv files) are "Pathed" or located by the .swf that is calling them. The underlying principle is that the Flash assets need to be pathed relative to the Web page that the .swf is located on, NOT the actual, physical location of the .swf.
For review:
Pathing issues
Almost always when it works on the local machine and not the server, it's a pathing problem.
You can put your Flash related files in whatever folders you want, they do NOT have to be in the root, they do NOT all have to be in the same folder. But if you have a problem and if sticking them all in the root folder works, then you know that the issue was a pathing problem.
Just remember that paths used in the .swf become relative to the Web page on which the .swf is placed, NOT it’s physical location. So for example, if your .swf is in the flash/data folder and you use that .swf on a Web page in the root folder, you are in effect, removing that .swf from flash/data and putting it in root. So if the .swf is loading any related files (xml, images, video, etc), the path used inside the .swf to load the .xml file has to be relative to it's new location in root and then back down into flash/data. This is true even though when testing the .swf by itself, it can be inside flash/data and work just fine, since relative to it's location, the path is just fine, they are in the same folder. But if that same path is used when the .swf is placed on a page two folder levels up, the relative path has changed, the old "same folder" path will not work.
In fact if you are placing the .swf on a web page in a different folder than the .swf is stored in, and that .swf calls external assets, then direct clicking and opening of the .swf in it’s folder should NOT work! That’s because the paths to the external assets should be relative to the Web page and not the physical location of the .swf.
So just be sure that you use addresses relative to the final Web page locations (not physical file locations) and you can put the Flash related files in what ever folders you want.
Best wishes,
Eye for Video
www.cidigitalmedia.com
So you can place the .flv wherever you want, but you can't just go and move the .flv without also correcting the path to the .flv inside the .swf.
So be sure that you have the .flv in the correct subfolder before you do any insert of the Flash player.
Also I'm not a great fan of requiring my viewers use the latest and greatest (and most bug filled version) of any pluggin or software for that matter.
<param name="swfversion" value="11.0.0.0" />
I refer NOT to upgrade to ver 11 so will not be seeing your Flash anytime soon. If you want to appeal to a large audience, change that to version 10.
Best wishes,
Adninjastrator

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
Word, and powerpoint application are working fine.
Environment : Windows 7 64-bit, MS Office 2013 64-bit
Steps to recreate
(i) Create new user account and add to any group ( do not log on using this
account)
(ii) runas /user:<new user account> <fullpath>\excel.exe
it will ask password so enter on command prompt
(iii) open any excel document and click File->Print
(iv) verify result (it is failing) it pop ups below error
Error:`Microsoft Excel
No printers are installed. To install a printer click the File tab, and then click
Print. Click No Printers Installed, and then click Add Printer. Follow the
instructions in the Add Printer dialog box.

Sorry for late reply i was not at work
I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
Probably excel behaves differently from other office applications.
Probably it is a bug in excel
Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

Universe Creation On OLAP Cube(SSAS) throwing error. in BO X1 3.1

Hi Experts,
I have created OLAP universe based on SSAS Cube using Microsoft SQL Server 2005 Analysis Services Driver.
i have created webi report based on this SSAS Cube,everything is fine
but when i create condition in universe level,if i use the same universe in webi report its throwing error:An internal error occured while calling the 'processDPCommands' API.
Thanks,
Prasad

This should be set up in steps, Have you configured java AD kerberos so you can login via your web/app with AD? This is a prerequisite before setting up any type of delegation to the DB.
You can also set up SSO in the front end but this shouldn't be necessarry for delegating to the DB.
What SPN's do you need...
Well if using java AD you should have an SPN for the account running the SIA (typically BOBJCentralMS/something) This SPN needs to be set in the CMC, You will need the krb5 and bsclogin files to login to your web/app with kerberos/AD. The krb5.ini will have to have a setting forwardable = true, and finally the MSAS server will need SPN's http://support.microsoft.com/kb/917409
This a a very complex configuration and you will likely need to open an incident with support to get an engineer to help. I'm not sure where our current docs for the configuration are.
Regards,
Tim

Universe created on BI cube throws error.

Hi Experts,
This is the first time i have created one universe based on a Cube in BI system. After universe creation, I am logined into WebIntelligence Rich Client and create a query on top of the created universe which throws errors like below.
A database error occured. The database error text is: The supplied XML is not valid. <CONSTANT>. (WIS 10901)
I tried with many combinations, but, in result sometimes with blank report and sometimes throwing above error.
Cany anyone suggest me what is the solution for this ?
Regards,
Suresh

Hi Suresh,
The reason here is some thing has bean changed at SAP BI Cube after creation of Universe in Business Objects.
Solution for this is " Refresh the universe structure " and then save it and export and try create reports. If it is not the reason give some more clarity on your error.
Thanks.
ChiranGV

Kobo Player 1.3.1 throwing errors in 2.0

Similar Messages

Maybe you are looking for