Kodak camera doesn't mount

Hey all,
I have a Kodak DC3400 digital camera (read: really old!) that works fine with iPhoto and Image Capture. I have never installed the Kodak software that came with the camera because I haven't needed to, and it's SO old.
I'm trying to export pictures that were taken by the camera back to the flash card it has. BUT, the camera does not show up in the desktop as a drive, nor in my Disk Utility. System Profiler recognizes the camera fine in the USB drive. But I have no access to the card itself.
I read that Kodaks don't mount as an external drive in the Finder, but it hasn't been a problem for most people because they're importing, and just rely on iPhoto. Well, I'm trying to export.
I want to just drag and drop pictures back to the camera to the flash card to get them printed off at a Costco. Is there any way to do this in OSX/iPhoto/Disk Utility without installing a risky old Kodak program?

I have the same problem as Heather. Camera is a Canon Powershot S410. I want to be able to upload photos from iPhoto back to the camera from time to time, but there is no place I see it mounted, including Home or the desktop. The product recommended in the previous post only works for cameras that mount. I did a search but could only find some vague suggestions about looking though the literature that came with the camera. Any other suggestions, anybody? Thanks!

Similar Messages

Optura 20 and iMovie 10.0.6---camera doesn't mount

My daughter recorded a video for her class and needs to edit it. I have used my Optura 20 and successfully transferred video to the iMac but not in the last few years.
Currently running Yosemite and iMovie 10.0.6 on a mid-2011 iMac.
When I plug the camera directly into the firewire port, iMovie does not see it. When I go to "system information" and look at the Firewire bus, I see the warning "Unable to list FireWire devices." When I remove the camera and plug in my firewire HD, it appears quite nicely in System information; when I plug the camera into the drive to "daisy-chain" the system info reverts to "unable to list" and the hard drive disappears from my desktop.
This is using the (only) Firewire cable I have for the camera, which is 9 pin to 3 pin.
I went to my ancient mac mini (running OS 10.4) but that ancient beast has only a 6 pin outlet on the back.
Before I run out and try to find a 6--->3 cable, does anyone have any insight? Does this camera never work on a modern mac with a modern OS? Is the problem I am having likely to also show up on the Ancient Mini? My fallback position is to go to a camera store and have the miniDV converted to a digital file (and I would like to do this the old-fashioned way if at all possible).
Any thoughts?

Hi
NO CAMERA or A/D-box
Cable
Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
Test another FW-Cable very often the problem maker.
Camera
Test Your Camera on another Mac so that DV-in still works OK
Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
Some Cameras has a Menu where You must select DV-out to get it to work
Camera connected to "charger" (mains adaptor) - not just on battery
Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
Is the dip-switches set right ?
Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
Try resetting it
Connections
Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones after material is imported and edited.
GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
Does Your Mac have a FireWire Port
White MacBooks - don't
MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
if Thunderbolt - use a Thunderbolt to FireWire adaptor.
else - NO SOLUTION
Only option as I get it is either
Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
FileVault is off ? (hopefully)
Screen Saver - OFF
Energy Saver - OFF
Using WHAT versions ? .
Mac OS - X.5.4 ?
QuickTime version ? (This is the heart in both iMovie and FinalCut)
iMovie’08 (7.1.?), 09 or 11 ?
iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
FileVault - Secure that it’s turned off
Network storage - DOESN’T WORK
Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
USB hard disk
Network storage
File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Camera Doesn't Mount, But Seen In System Profiler

I can see in my system profiler that the camera is being recognized through the port, but its not being recognized by Image Capture.
Any ideas on what to do?
Also, my DVD-Rs arent mounting on my desktop either.
Lotsa whirling and grunting, but nothing.
Two questions, hope someone can help me out.
Thanks
Nat

as a guess, if optical drive is not working, it could be messing up logic board functions.

Internal camera doesn't work after Firmware Update

Hi everybody,
I had some troubles after updating the Firmware to version 1.1 on my MacBook (the black model). Since the update my camera (the one mounted on top of the screen) doesn't work any longer (it keeps capturing a plain green picture) and the led near the camera is always lighted. Is there anyone who had the same problem? Any idea to solve it?
thanks
MacBook Mac OS X (10.4.8)

Hi,
problem solved restarting with OptAlt+PR

Kodak camera dock 6000 will not complete upload to iPhoto

After installing Yosemite and updating I photo, My Kodak camera dock 6000,opens I Photo and starts the upload but goes no further.

Hi Larry,
Removing the card and loading through the reader slot works fine. Using the camera dock iphoto recognizes the camera and starts the loading process but doesn't show any pics or complete the loading.

Leopard doesn't mount the disk with time machine backup!

Hi friends. It's my first time in this forum, and I'm sorry by now for my poor english.
My problem: One week ago I had some problem with hard disk, but after a visit to an Apple center and after a replacement of my disk the problem was solved.
Now I want to restore all my file and my system preference from an external hard disk (USB LaCie 500GB) when have made a complete backup with time machine.
But Leopard doesn't mount the disk in finder or in Utility Disco. I see it only in System Profiler. I try with my old iBook with Tiger and it mount correctly the disk! It's amazing! Please Help me, I need my file on my iMac for work!
Thanks and merry Christmas!!!

Similar thing for me as well. I however haven't made a backup using Time Machine.
In preparation for Leopard, I reformatted my laptop's hard drive and installed Mac OS X 10.5.1 fresh. As soon as I plugged in my trusty 500GB external WD MyBook Pro (trying both Firewire 400 and 800 on my MacBook Pro 17"), I get the following alert:
"Disk Repair
The disk "500GB" was not repairable by this computer. It is being made available to you with limited functionality. you must back up your data and reformat the disk as soon as possible. OK"
Keep in mind, I run Disk Utility and "Repair Disk" and "Repair Permissions" religiously every week and have had no issues while running under Mac OS X 10.4.11. My other laptop running the 10.4.11 doesn't report any issues with the drive at all - only when I plug it into this one running 10.5.1.
Is there a firmware update for this drive? Is this Apple's issue? I have another LaCie Firewire drive and it works flawlessly even under 10.5.1.
Right now, I can't even use the drive as it's Read Only (due to the error).
In system logs:
Feb 9 19:02:59 Cam diskarbitrationd69: unable to repair /dev/disk4s3 (status code 0x00000008).
/dev/rdisk4s3: fsck_hfs run at Sat Feb 9 19:00:41 2008
/dev/rdisk4s3: ** /dev/rdisk4s3 (NO WRITE)
/dev/rdisk4s3: QUICKCHECK ONLY; FILESYSTEM DIRTY
/dev/rdisk4s3: fsck_hfs run at Sat Feb 9 19:00:41 2008
/dev/rdisk4s3: ** /dev/rdisk4s3
/dev/rdisk4s3: ** Checking Journaled HFS Plus volume.
/dev/rdisk4s3: ** Checking Extents Overflow file.
/dev/rdisk4s3: ** Checking Catalog file.
/dev/rdisk4s3: Incorrect number of file hard links
/dev/rdisk4s3: ** Checking multi-linked files.
/dev/rdisk4s3: ** Checking Catalog hierarchy.
/dev/rdisk4s3: ** Checking Extended Attributes file.
/dev/rdisk4s3: ** Checking volume bitmap.
/dev/rdisk4s3: ** Checking volume information.
/dev/rdisk4s3: ** Repairing volume.
/dev/rdisk4s3: ** The volume 500GB could not be repaired.
The drive is reported to be "Ok" when running Disk Repair on other machines not running Leopard. As a test, I just "upgraded" my wife's laptop to Leopard and now I have the same issue on that machine.
Help.

Canon mini Disk camera doesn't work if external drive connected

A long story.      Anyway, I have a MacPro Intel Dual Core 266 Ghz with 5 Gbs RAM, 4 internal hard drives HD1~HD4 (HD1 OSX 250 and three 500Gb) and two external HD5 (two partitions~HD5 & Time Machine Backups) and HD6 (1 Tb each).
I've been using a Canon mini DV video camera FV-M10 (Firewire 400) for live video (Skype/iChat) and also for importing video into Final Cut Express, After Effects or iMovie up until a few days ago. Both "live" video and from the recorded mini cassette tape. Then all of a sudden not one of the software recognized my camera anymore. I tried both Firewire 800/400 and USB2 connections using a few different cables. In Skype...(sometimes) it automatically shows the name FV-M10 in the camera slot, but the screen is black. No, I checked if I left the cover on. I checked my Sony WX-5 digital camera and see if that is recognized. Yes, both pics and AVCHD videos are seen using the USB connection.
The problem started like this.
I was downloading a file. Had to work for an hour and when I came back upstairs. I noticed that the screen was frozen.   So, I shut the Mac down. And when I started it again, well nothing happened except for a grey screen. A half~sized cursor was stuck up in the top left. But, my mouse also had a cursor which was movable.
It wouldn't even recognize the OSX Install Disk holding down "C" or "Option". Only starting with "Shift" held down, "Safe Boot" could I use the basics like Mail, Safari, Firefox.   NO sound and no video. Tried a few times as well as cleaned my OSX HD1 hard drive and re-installed from "Safe Boot" mode".   So, I had it sent into Apple Tokyo for repairs.   Apple put in a new board.     Great!      I came it back in two days.   I cleaned the OSX hard drive and re-installed Mac OSX with the up-dates as well and got some of my main backed up stuff Mail, bookmarks, address book etc.   It started fine.     But, when I went to use Skype, iChat, iMovie or Final Cut Express they still couldn't recognize my camera. I had been using the Canon FV M10 camera for a few years with both external hard drives on. There were never any problems until just before I sent it into the shop.
There was only one way to use my camera. Un-Plug the external HD6. Then the camera functions fine. but remember I had been using this camera with both HD's for around two years without any problems.
Notes on symptoms: and what actions I took.
Front connections: FW400 Canon camera. FW800 (Tried connecting HD6)
Rear Connections: USB2 1) MidiMan 2 x2   2) mouse 3) Canon Printer
                               FW400 HD5 FW800 (tried HD6)
With HD6 Connected.
iMovie 11 9.02 : Start iMovie O.K. No camera on.   Turned camera "on" then "No Camera Connected" notice came up.   (did this a few times)   Turned camera off.   Quit iMovie.
2nd start: Camera On.   iMovie freezes.   Spinning Colored beach ball.   I then Force Quit Option-Apple-ESC
iMovie shows (not responding) When I turn off the camera. (not responding) disappears and iMovie is working again. But, "No Camera Connected" shows again. Quit!
Un-Plugged (Ejected) HD6.
When I un-plugged HD6,    (tried both the front and rear connections).   iMovie still on.
"No Camera Connected" I Quit iMovie.
Re-start iMovie: Camera on… Live video and record miniDV tape can both be seen.
Skype: Both live video and mini DV tape recording even plays back over Skype screen.
iChat (same as Skype) O.K.
Since Apple replaced the board 661-3932 Card Video, NVIDIA GeForce 7300 GT which cost just about $X00.00 (¥XX,000).   I assume that they don't also check all the connections etc. I mean from the connector to the video board.
The call to Apple Tokyo today.
Just talked to Apple (Mac) Tokyo about my computer problem. Seems like they're trying to squeeze their way of more repairs by saying I have a hard drive configuration problem.   But it doesn't seem like that!   I worked with it 2~3 hours today...and here is the basic problem.
I've used the Canon FV M10 mini DV camera with Skype, iChat, iMovie and FCEx for few years (HD6) is over a year old-the most recent add on) with no problem.    With both external 1Tb hard drives. And Apple said that it's a 3-party problem. (different makers etc.) But, it's NOT!     Yes, they put in a new board.   But, I'd say the problem is from the connection (where I plug the cable into the Mac) to the board.
When I connect HD6 (1Tb ext hard drive).   FW 800 (either back or front connection) the video camera doesn't work in Skype, iChat, iMovie, or Final Cut Express.     If I eject and Un-Plug HD6 all of them work fine. The camera "live" or the camera playing back the mini DV tape video.
Wouldn't this be a problem between the connections (front & back) to the new video board? Or does anyone have an answer.   Apple seems to have said, "We can't help you".   Please someone help! thanks

+My mini isn't responding to startup commands like "C" or "D" from the keyboard.+
You'll need a wired usb keyboard for these commands to work -- and the Apple Aluminum keyboard won't work either.
But just about any PC usb keyboard will work. Alt maps to Option and Win-key to CMD.

IPad 2 brand new camera doesn't "open"

Hi everyone
Just bought my iPad 2 today and what a surprise, the camera doesn't work
Front camera it's ok. The problem is with the one in the back. It doesn't open.
I've done a little research on the web and I can see this is a very common problem. ¿What can i do?
greetings from
Coacalco
Estado de México
México

Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider

Camera doesn't work in FaceTime

When Face-timing, my camera doesn't work (I have no image of myself). The box is there, but it is always black (i.e., the person I am face-timing can't see me).
The camera works fine outside of FaceTime.
I just reset the IPod touch and now the camera on the opposite side of the screen works, but not the screen side. Also, the Non Screen side camera tends to freeze.
Thoughts?
IPod Touch iOS 8.1.2
Thanks for any help.
M

I do not know what you mean by reset. Try the following if you have not done so already:
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My new MAC 10.10.3 will not recognize my Canon cameras or my Kodak camera. Help from the Geek Squad was useless.

My iMAC 10.10.3 Yosemite will not recognize any of my two Canon cameras or my Kodak camera. What's the solution?

Can you temporarily connect some other USB device to verify that your PowerBook's USB ports are in working order? Do you have another computer to which your camera can be connected to verify that a working USB connection is being made from the camera?
If we can somehow eliminate a hardware issue, then you can focus on software. Have you tried creating a new admin user account? If the new account recognizes your camera, it would narrow the problem down to something within your regular user account.

New 24" imac 2.8ghz built-in camera doesn't work

the built-in camera doesn't show up in ichat or photo booth. "there is no camera attached to this computer" error in ichat...
plugging in an external iSight does work.
i've repaired permissions, rebooted, run fsck,
tried to run the 10.4.10 combo intel updater but the one available online won't let you install it on this system. it comes with 10.4.10 installed.
powered down and unplugged everything for 30 seconds, the plugged everything back in and rebooted.
i've reinstalled the os from the included dvds... "archive and install"
all software updates are installed, including "iMac Software Update 1.0"
any other ideas other than send it back?

i might have a little help for you people. I just had this same problem, and i was very frustrated about it. here is how i fixed it.
Have you been messing with Quicktime in the last few days/hours? you probably deleted a file that you needed. i found a place tha told me how to put it back, as well as had a download of the file in question. here is the link address --
http://techslaves.org/index.php?page=17
hope it works for you too!

Hi, I have a Macbook Air OS X 10.10.3 and the cam doesn't work. How can I fix it?

Hi, I have a Macbook Air OS X 10.10.3 and the cam doesn't work. How can I fix it?

How to Troubleshoot iSight - Apple Support

MY BUILT IN CAMERA DOESN'T WORK

my built in camera doesn't work, any advise?

Need a lot more information. What Mac do you have? What OS X? What program?
By the way, its is called the Facetime HD camera, which should help you search the forums for an answer to your question.

Hi, I have a freecom 1TB hard drive which was working fine until it froze. I pulled it out (mistake I now know) and now it doesn't mount. It shows up in Disk Utility but won't manually mount. When I try to repair it gives message 'failed on exit'. hel

Hi, I have a freecom 1TB hard drive which was working fine until it froze. I pulled it out (mistake I now know) and now it doesn't mount. It shows up in Disk Utility but won't manually mount. When I try to repair it gives message 'failed on exit'. Some people have said to try Disk Warrior, but at $100 it's quite expensive maybe fix. help!

You likely need to reformat the drive which will destroy all data and you need a backup to restore it. If no backup is present then a data retrieval service can be more expensive than DiskWarrior. There is software that can rescue the data but I can not vouch for it's effectiveness as I have always maintained backups. .
http://www.prosofteng.com/
http://www.wondershare.net/ad/data-recovery-mac.html?gclid=CLTp3Mj07rkCFevm7AodL lUAHw
http://diskdoctors.com/software/mac-data-recovery/utility.asp?gclid=CMyf_MH17rkC Fcvm7AodSE0A8A
http://www.cleverfiles.com/

Nokia Lumia 800 camera doesn't work..

Hi everyone.. I have problem.. I buyed NOKIA lumia 800, but camera doesn't work.. When I turn on camera i have black screen, and when i press camera button, she just turn off.. Please help.. i tried hard reset, diagnostic tool, but she doesn't work.

Since the hard reset does not help and you have just only bought the phone, I suggest returning it to the seller for a replacement or refund.

Kodak camera doesn't mount

Similar Messages

Maybe you are looking for