Kodak easyshare 5300 drivers not installing on os 10.9

I just adopted a kodak easyshare 5300 all-in-one printer. went to kodak's support page to get the drivers (dont have disc). once downloaded, I clicked on "installl software" and got this message: "install software cant be opened because it is from an unidentified developer." the only reason I adopted this printer was because my hp deskjet 932 suddenly stopped workiung after i upgraded my mac software to 10.9.....
thanks!
herb

Do not change any security settings.
See the heading "How to open an app from a unidentified developer" on this support page. The instructions apply to Installer packages and other installable items as well as applications.

Similar Messages

Trouble installing Kodak Easyshare 5300 Printer

I got a Kodak Easyshare 5300 All-in-one printer as a gift. While trying to install it I get the message 'no driver installed'. I realize it is compatible with OSX 10.4.8 or later, but my question is - is there any way around this if I have OSX 10.3.9? Any help will be much appreciated.
iMac Mac OS X (10.3.9)

Read the troubleshooting section in the user manual that came with your printer and get in touch with Epson.
How is your printer connected to your computer? Did you check your printer settings in System Profile?
Research Knowledge Base for Mountain Lion printing.

PC suite - Cable drivers not installed???

After installing the PC suite VER 6.82.22.0, though PC recognizes N70 phone, the PC suite does not get connected. When clicked 'About PC suite' and 'system info', message cable drivers not installed is found. However, if checked in the control panel, the drivers are found installed. The earlier version did not have any problems. Can any body solve this.

try this:
/discussions/board/message?board.id=pcsuite&message.id=11480

HP 5610xi "drivers not installed"

Setup and printed from a HP 5610xi on a iBook G4 (10.3.9) using USB. Then tried to setup through Airport Express (USB printing enabled)-Rendezvous 'sees' the printer but "drivers not installed' message stops the process? 'Latest' HP drivers are installed

HP 'answered' my question - the 5610 AIO is not compatible with the Airport Express! Compatible list is at: http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&cc=us&docname=c00035369

Computer says itunes drivers not installed?

computer doesnt recognize ipods. tried to update itunes and it shut my computer down and blew out all my ports. had computer repaired, seems that update worked but cant plug in ipods to sync music and the box comes up saying the itunes drivers not installed. how do i install them? im a little hesitant to download itunes again after what happened last time, so just wanted some advice.

No, you will not lose your library. The actual installation and where your files are stored are in separate locations. When you uninstall, you are only uninstalling the program, and therefore, your library will not be affected.
Only thing to note is if you changed the location of your itunes library, you will have to tell itunes where you keep your library, so itunes can load it from there.

Software for Kodak EasyShare C875 Camera - To Install or Not?

I just purchased the Kodak EasyShare C875 Camera. It came with a software disk.
Should I just plug the camera into my Mac and let it do the rest and ignore the software installation disk?
Or should I install the Kodak software before connecting the camera to the Mac?
I tend to let the Mac do the deciding for me. I'm not using any video from the camera, only still images. And I use iPhoto 6 exclusively to store my images.
iMac (early 2006) 17-inch display Mac OS X (10.4.5)

PatyPaty
Then why bother with the extra software?
Plug in the camera and see if iPhoto sees it okay. If it does, then there's no compelling reason to install the extras.
Regards
TD

TS1538 I have a 4th generation iPod. My system is Windows 7 64-bit. iPod not recognized in iTunes. Also getting iTunes error about cd/dvd drivers not installed. I have reinstalled 4 times and finally got iPod software installed properly. Please help!

I have a 4th generation iPod. My system is Windows 7, 64-bit. iPod not recognized in iTunes. It is in my computer. Also getting iTunes error message about cd/dvd drivers not properly installed. I've restalled 5 times and still not working. Finally got iPod software to properly install. Please help!

Did you try this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Latest Vista 64 bit drivers not install

It don't matter what I do, I cannot get the "SBXF_PCDVTBETA_L3_2_0_0000" drivers working with my X-fi Fatality sound card.
Things I have done:
Turned off the signiture thingy as per the read-me (both at start-up and premient way)
Turned off windows firewall
Turned off Windows Defender
No Antivirus/Firewall/Spyware/Adware protection
Run the file as a normal user and right clicked and selected "run as administrator".
Made sure no previous sound drivers were installed.
As soon as it gets to the "Updating the windows files", I get another box come up:
Creative Device Driver Installation has stopped working.
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is avalible.
The only button I have is, close program, I click that and it goes to the audio console. At that stage I cancel the installation because ther sound apps dont work without the sound driver.
So I am left with a very muted PC.
My PC Specs:
Windows Vista Beta 2 5384
AMD Athlon 4000 2.4 Ghz
Asus Geforce 7800GT
2GB of RAM
Proacti've Asus A8n-Sli Deluxe Motherboard
Asus TV card
Creative X-fi Fataty Soundcard
Logitech 2. Speakers
Hopefully somebody can help me out with my issue
Thanks alot
Scott Seggons Message Edited by Seggons on 07-5-2006 09:05 PM

Boot Camp will not support Vista on newer iMacs, you will need to upgrade to Windows 7. Also as an FYI there is a Boot Camp forum, you can locate it by clicking Apple Support Communities and then in the search field type Boot Camp.
Best of luck,
Roger

ISE Webpack, Cable Drivers not installing for Debian Wheezy

Trying to install ISE Webpack with cable drivers yield the following error during installation:
Driver installation failed. Please check the /.xinstall/install.log file for more information on the cause of the installation failure.
Since drivers are not installed, attempting to launch iMPACT later on gives:
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT:923 - Can not find cable, check cable setup !
The entire install.log can be found here:
--Install log = /tmp/xilinx_ise_webpack/14.7/ISE_DS/.xinstall/install.log
--Installing cable drivers.
--Driver versions in this package: windrvr=1301, xpc4drvr=1041
--Script name = /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/install_drivers
--HostName = invidia
--Current working dir = /home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1
--Script location = /home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1
--Script argument=/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE.
Digilent Cable Drivers Installer
Checking for prerequisite: libusb-1.0
libusb-1.0.so.0 is present
Installing component: Digilent Adept Runtime
Adept Runtime Installer
64-bit operating system detected
Installing runtime libraries.....
Checking to see if libdabs.so is already installed....
Existing installation of libdabs.so found. Checking to see if this version should be installed.
Version 2.11.1 is currently installed. Version libdabs.so.2.11.1 will not be installed.
Checking to see if libdaci.so is already installed....
Existing installation of libdaci.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdaci.so.2.7.2 will not be installed.
Checking to see if libdaio.so is already installed....
Existing installation of libdaio.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdaio.so.2.7.2 will not be installed.
Checking to see if libdemc.so is already installed....
Existing installation of libdemc.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdemc.so.2.7.2 will not be installed.
Checking to see if libdepp.so is already installed....
Existing installation of libdepp.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdepp.so.2.7.2 will not be installed.
Checking to see if libdftd2xx.so is already installed....
Existing installation of libdftd2xx.so found. Checking to see if this version should be installed.
Version 1.0.1 is currently installed. Version libdftd2xx.so.1.0.1 will not be installed.
Checking to see if libdgio.so is already installed....
Existing installation of libdgio.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdgio.so.2.7.2 will not be installed.
Checking to see if libdjtg.so is already installed....
Existing installation of libdjtg.so found. Checking to see if this version should be installed.
Version 2.10.1 is currently installed. Version libdjtg.so.2.10.1 will not be installed.
Checking to see if libdmgr.so is already installed....
Existing installation of libdmgr.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdmgr.so.2.7.2 will not be installed.
Checking to see if libdmgt.so is already installed....
Existing installation of libdmgt.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdmgt.so.2.7.2 will not be installed.
Checking to see if libdpcomm.so is already installed....
Existing installation of libdpcomm.so found. Checking to see if this version should be installed.
Version 2.10.1 is currently installed. Version libdpcomm.so.2.10.1 will not be installed.
Checking to see if libdpcutil.so is already installed....
Existing installation of libdpcutil.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdpcutil.so.2.7.2 will not be installed.
Checking to see if libdpio.so is already installed....
Existing installation of libdpio.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdpio.so.2.7.2 will not be installed.
Checking to see if libdpti.so is already installed....
Existing installation of libdpti.so found. Checking to see if this version should be installed.
Version 2.8.2 is currently installed. Version libdpti.so.2.8.2 will not be installed.
Checking to see if libdspi.so is already installed....
Existing installation of libdspi.so found. Checking to see if this version should be installed.
Version 2.8.2 is currently installed. Version libdspi.so.2.8.2 will not be installed.
Checking to see if libdstm.so is already installed....
Existing installation of libdstm.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdstm.so.2.7.2 will not be installed.
Checking to see if libdtwi.so is already installed....
Existing installation of libdtwi.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdtwi.so.2.7.2 will not be installed.
Checking to see if libjtsc.so is already installed....
Existing installation of libjtsc.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libjtsc.so.2.7.2 will not be installed.
Successfully installed runtime libraries.
Installing system binaries.....
installed "/usr/local/sbin/dftdrvdtch"
Successfully installed system binaries in "/usr/local/sbin".
Installing firmware images.....
Successfully installed firmware images in "/usr/local/share/digilent/data/firmware".
Installing JTSC device list.....
Successfully installed JTSC device list "/usr/local/share/digilent/data/jtscdvclist.txt".
Installing CoolRunner support files.....
Successfully installed CoolRunner support files in "/usr/local/share/digilent/data/xpla3".
Installing CoolRunner 2 support files.....
Successfully installed CoolRunner 2 support files in "/usr/local/share/digilent/data/xbr".
Installing Adept Runtime configuration.....
Successfully installed Adept Runtime configuration "/etc/digilent-adept.conf".
Installing USB UDEV rules.....
Successfully installed USB UDEV rules "/etc/udev/rules.d/52-digilent-usb.rules".
Successfully reloaded UDEV rules.
Successfully updated dynamic loader cache.
Successfully installed Adept Runtime.
Successfully installed component: Digilent Adept Runtime
Installing component: FTDI Drivers (libftd2xx)
FTDI Driver Installer
64-bit operating system detected
Checking to see if libftd2xx.so is already installed....
Existing installation of libftd2xx.so found. Checking to see if this version should be installed.
Version 1.0.4 is currently installed. Version libftd2xx.so.1.0.4 will not be installed.
Successfully updated dynamic loader cache
Successfully installed FTDI Driver
Successfully installed component: FTDI Drivers (libftd2xx)
Installing component: libCseDigilent
Installer for Plugins for Xilinx Tools
Plugins will be installed in the following directory: "/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE"
Found plugin "libCseDigilent" version "14.1" by "Digilent".
Successfully installed plugin in "/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/lib/lin64/plugins/Digilent/libCseDigilent".
Successfully installed 1 plugin(s) for Xilinx Tools.
Successfully installed component: libCseDigilent
Successfully installed Digilent Cable Drivers
--Kernel version = 3.2.0-4-amd64.
--Arch = x86_64.
--Installer version = 1100
--Unsetting ARCH environment variable.
--File /lib/modules/misc/install_windrvr6 does not exist.
--Installing USB drivers------------------------------------------
--File /etc/hotplug/usb/xusbdfwu.fw/xusbdfwu.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusbdfwu.hex version = 1030
--File xusbdfwu.hex exists.
--File xusbdfwu.hex version = 1030
--File xusbdfwu.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xlp.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xlp.hex version = 1028
--File xusb_xlp.hex exists.
--File xusb_xlp.hex version = 1028
--File xusb_xlp.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_emb.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_emb.hex version = 1028
--File xusb_emb.hex exists.
--File xusb_emb.hex version = 1028
--File xusb_emb.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xpr.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xpr.hex version = 2004
--File xusb_xpr.hex exists.
--File xusb_xpr.hex version = 2004
--File xusb_xpr.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xup.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xup.hex version = 1030
--File xusb_xup.hex exists.
--File xusb_xup.hex version = 1030
--File xusb_xup.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xp2.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xp2.hex version = 2300
--File xusb_xp2.hex exists.
--File xusb_xp2.hex version = 2300
--File xusb_xp2.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xse.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xse.hex version = 2006
--File xusb_xse.hex exists.
--File xusb_xse.hex version = 2006
--File xusb_xse.hex is already updated.
--Product ID 0007 is already in the usermap.
--Product ID 0009 is already in the usermap.
--Product ID 000d is already in the usermap.
--Product ID 000f is already in the usermap.
--Product ID 0013 is already in the usermap.
--Product ID 0015 is already in the usermap.
--Product ID 0008 is already in the usermap.
--Installing windrvr6---------------------------------------------
--Checking version.
--File /lib/modules/3.2.0-4-amd64/kernel/drivers/misc/windrvr6.ko does not exist.
--File LINUX.3.2.0-4-amd64.x86_64/windrvr6.ko does not exist.
--Setting source version to 1301.
--File LINUX.3.2.0-4-amd64.x86_64/windrvr6.ko is newer than the destination file.
USE_KBUILD = no
checking for cpu architecture... x86_64
checking for WinDriver root directory... /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64
checking for linux kernel source... found at /lib/modules/3.2.0-4-amd64/build
checking for lib directory... ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT)_32.so /usr/lib/$(SHARED_OBJECT).so; ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT).so /usr/lib64/$(SHARED_OBJECT).so
checking which directories to include... -I/lib/modules/3.2.0-4-amd64/source/include
checking linux kernel version... not found
make -f makefile.wd clean
make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make -f makefile.wd
make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make -f makefile.wd
make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
--make windrvr install rc= 2
--install_windrvr6 rc = 2
--Module windrvr6 is not running.
--Module xpc4drvr is not running.
--Note: By default, the file permission of /dev/windrvr6 is enabled for the root user only
and must be changed to allow access to other users.
--real rc=2
--Driver installation failed.
--Digilent Return code = 0
--Xilinx Return code = 1
--Return code = 1
INFO ::Mon Dec 02 10:59:01 TZ 2013:: Console message preference has been changed to INFO
INFO ::Mon Dec 02 10:59:01 TZ 2013:: Xilinx Installer/Updater launched.
INFO ::Mon Dec 02 10:59:05 TZ 2013:: Proxy choice: IE
INFO ::Mon Dec 02 10:59:05 TZ 2013:: install version: 14.7
INFO ::Mon Dec 02 10:59:05 TZ 2013:: dat file URL: www.xilinx.com/direct/swhelp/14_wiclient.dat
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: /tmp/xilinx_ise_webpack/14.7/ISE_DS
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Acquire or Manage a License Key
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Edition : ISE WebPACK
INFO ::Mon Dec 02 11:03:14 TZ 2013:: ISE DS Common
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: common
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: ISE DS Common
INFO ::Mon Dec 02 11:03:14 TZ 2013:: EDK
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: EDK
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: EDK
INFO ::Mon Dec 02 11:03:14 TZ 2013:: PlanAhead Analysis Tool
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: PlanAhead
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: PlanAhead Files
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: setupEnv.sh
INFO ::Mon Dec 02 11:03:14 TZ 2013:: ISE
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: ISE
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: Design Environment Tools
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: WebPACK Devices
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Install Linux System Generator Info XML
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Ensure Linux System Generator Symlinks
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Enable WebTalk to send software, IP and device usage statistics to Xilinx (Always enabled for WebPACK license)
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Install Cable Drivers
INFO ::Mon Dec 02 11:08:59 TZ 2013:: fileset.txt written.
INFO ::Mon Dec 02 11:08:59 TZ 2013:: Migrating registry and creating file association
WARN ::Mon Dec 02 11:08:59 TZ 2013:: Unable to copy "/home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1/common/idata/.pref.bin" to "/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/.xinstall/idata/.pref.bin" source does not exist.
INFO ::Mon Dec 02 11:09:00 TZ 2013:: Post-GUI updates completed.
INFO ::Mon Dec 02 11:11:41 TZ 2013:: fileset.txt written.
INFO ::Mon Dec 02 11:11:41 TZ 2013:: Migrating registry and creating file association
INFO ::Mon Dec 02 11:11:42 TZ 2013:: Post-GUI updates completed.
INFO ::Mon Dec 02 11:13:23 TZ 2013:: fileset.txt written.
INFO ::Mon Dec 02 11:13:23 TZ 2013:: Migrating registry and creating file association
INFO ::Mon Dec 02 11:13:24 TZ 2013:: Post-GUI updates completed.
INFO ::Mon Dec 02 11:19:00 TZ 2013:: fileset.txt written.
INFO ::Mon Dec 02 11:19:00 TZ 2013:: Migrating registry and creating file association
INFO ::Mon Dec 02 11:19:01 TZ 2013:: Post-GUI updates completed.
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: setupEnv.sh
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: Install Linux System Generator Info XML
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/sysgen/util/ensure_symlinks.sh /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/sysgen lin64
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/PlanAhead/data/webtalk/webtalk_install.sh on
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /bin/sh -c "/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/install_drivers >>/tmp/xilinx_ise_webpack/14.7/ISE_DS/.xinstall/install.log /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE"
INFO ::Mon Dec 02 11:19:14 TZ 2013:: Driver installation failed. Please check the /.xinstall/install.log file for more information on the cause of the installation failure.
INFO ::Mon Dec 02 11:19:36 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/xlcm
INFO ::Mon Dec 02 11:20:14 TZ 2013:: Xilinx Installer/Updater exited with return status "0".
INFO ::Mon Dec 02 11:20:14 TZ 2013:: ################################################################
What are the steps required to fix the drivers on Debian Wheezy?
Thanks in advance
Andreas Frisch

I'm a bit surprised that the only supported Linux distros are commercial (costing money) distros!
What's the point in providing Linux support for your tools then. The overwhelming majority of Linux users use free distros like Mint, Ubuntu, Debian, Fedora etc.
I had exactly the same problem and now I'm forced to BUY a Linux distro in order to build PetaLinux?
Anyway, a) are there any plans to support these tools on the more popular (free) distros? and b) Does anyone know if we can use CentOS 6, since that's supposed to be a community (free) clone of the supported (but not free) RHEL 6 distro?
Anyone know of an 'unsuported' Linux distro that 'works' anyway (especially for the cable drivers)?
It LOOKS as if that one cable driver install issue is the only thing preventing us from using a boat load of other distros. Can't this be fixed?

Kodak AIO Printer Drivers not allowing sleep

I recently started noticing that my MacMini isn't sleeping at the specified interval set in the System Pref's.
After extensive testing, I've narrowed it down to the Kodak AIO printer drivers (and/or associated software) that's keeping it awake. This occurs across all user profiles and resolves itself immediately upon removal of the Kodak AIO software and drivers.
Looking at the console log going back as far as last night the following sequence is repeated every 30 seconds.
Apr 21 04:29:09 Mac-Mini com.kodak.BonjourAgent[127]: PID 127 Thread 0xB0103000 RTC.cpp Line 567 at RTCThread() [9830/49225 ms]: PID 127 Thread 0xB0103000 RTC.cpp Line 567 at RTCThread() [9830/49225 ms]: Starting RTC check...Starting RTC check...
Apr 21 04:29:09 Mac-Mini com.kodak.BonjourAgent[127]: PID 127 Thread 0xB0103000 TigerPhysicalPrinterTCPBonjour.cpp Line 112 at GetListOfAttachedPrinters() [9830/49234 ms]: Found uri = dnssd://KodakESP7%2B0772._pdl-datastream._tcp.local./?bidi
Apr 21 04:29:09 Mac-Mini com.kodak.BonjourAgent[127]: , name = KodakESP7+0772, makemodel = KODAK ESP 7/9 All-in-One Printer, queue = KodakESP7_0772
Apr 21 04:29:09 Mac-Mini com.kodak.BonjourAgent[127]: PID 127 Thread 0xB0103000 TigerPhysicalPrinterTCPBonjour.cpp Line 115 at GetListOfAttachedPrinters() [9830/49234 ms]: Found KodakESP7+0772
Apr 21 04:29:09 Mac-Mini com.kodak.BonjourAgent[127]: at URI dnssd://KodakESP7%2B0772._pdl-datastream._tcp.local./?bidi
Apr 21 04:29:09 Mac-Mini com.kodak.BonjourAgent[127]: PID 127 Thread 0xB0103000 TigerTCPUtilities.cpp Line 134 at ResolveNetService() [9830/49260 ms]: CFNetServiceResolveWithTimeout() took 26ms to run!
Apr 21 04:29:09 Mac-Mini com.kodak.BonjourAgent[127]: PID 127 Thread 0xB0103000 RTC.cpp Line 441 at UpdateRTC() [9830/49260 ms]: PID 127 Thread 0xB0103000 RTC.cpp Line 441 at UpdateRTC() [9830/49260 ms]: No RTC updates needed at this time.No RTC updates needed at this time.
Apr 21 04:29:09 Mac-Mini com.kodak.BonjourAgent[127]: PID 127 Thread 0xB0103000 RTC.cpp Line 571 at RTCThread() [9830/49260 ms]: PID 127 Thread 0xB0103000 RTC.cpp Line 571 at RTCThread() [9830/49260 ms]: Finished RTC check...Finished RTC check...
I'm going to contact Kodak but any suggestions? Seems to be happening with recent versions of the driver, but I've not been able to determine at what point or update the Kodak printer drivers/software started exhibiting this behavior.

This is a Kodak problem, not an Apple one. AIO printers often cause the computer to stay awake; sometimes it is due to poor programming and other times it is user error. An AIO printer that includes a FAX that is set to receive faxes must keep the computer awake otherwise the computer cannot receive an unscheduled fax. Well written drivers will allow the user to turn this feature off but that means faxes can only be received when you are expecting them. Even if the AIO doesn't include a fax it is often the cause of computer insomnia.
The solution: (1) before buying an AIO printer check reviews of Mac owners to see if there are reports of insomniac computers with that model. (2) there are shareware and freeware programs that can put a computer to sleep even when the built in energy saver won't. Go to macupdate and search on insomnia

Device drivers not installing

GOt a palm pilot tx, need to put a kaba access control system on it. Tried win 7 64 bit computer, vista 32 bit computer, xp 32 bit computer and win 2000 computer. drivers will not install with plug and play nor with installation cd. I can't find anything online, as I am the only IT guy and I have many projects on the go right now. Any help would be appreciated.
Post relates to: Palm TX

PalmOS devices do not use "plug and play" to install software. They use a software program called "Quick Install" to install apps. Install Palm Desktop on the 32bit XP computer, then try the installation disk.
Echoing what smkranz said, are you sure you're trying to install a PalmOS program?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

CD drivers not installed on PSE 5

I'm using ver 5 on a new machine (Vista 64 bit) and things are going fine with the program.
Except, when I want to burn a disc. I get the message: The CD device driver is not installed. Please reinstall Photoshop Elements.
I did. Still the same result and the same message.
Is this link the solution to this problem?
http://www.adobe.com/go/kb402306
Thanks.
Al

Hi,
Did you try burning a CD with a software other than Photoshop Elements, Something like Nero? Are you able to burn your discs through that?
- Priyanka

Kodak Easyshare Printer Drivers

I got a new MacBook Air last December. It is usoing Lion OS 10.7.4. I am trying to load the printer driver for my odak Easyshare G600 printer dock. I have followed the directions I found on line but it does not finish the task. After installation, I restart the copmputer, connect by USB and then when I look for it in the set up screen it finds the printer but will not allow me to add it. Does anyone know where I am going wrong? Thanks

I received this from Kodak today
"Thank you for your e-mail regarding Kodak printer drives.
EasyShare software V5.2.1 for Macintosh is live on the web http://www.kodak.com/go/easysharesw
This update fixes the Sync and Transfer Manager problem that was created with the Mac OS X10.4.4 update. Please do a custom instalation and include the Kodak printer.
If the above did not solve the issue, there should be an update to the Kodak printer driver in the next week or two for compatibility with Mac Intel Core Duo computers.
If we can be of any further assistance please do not hesitate to contact us. If applicable, please quote your camera serial number or your customer reference number.
Yours Sincerely,
MT
Kodak Digital Imaging Support Centre"
Hope that helps
iMac Intel Mac OS X (10.4.4)
iMac Intel Mac OS X (10.4.4)

Drivers not installing on Win 7 x64 on 27" iMac

I originally posted this to the iMac forum but was told this might be a better place:
I'm struggling to install the correct sound and display drivers on my 27" Intel iMac for Windows 7 64-bit. The problems I'm trying to address are:
Inability to select screen resolution with correct aspect ratio (currently using 1920x1440, which is vertically squashed)
I suspect Windows is ignoring the iMac's graphics card
No sound
All hardware is working fine in OSX. This is what I've tried:
After installing Windows, installed the drivers included on the Snow Leopard Installation DVD
Updated Bootcamp to 3.1, then 3.2
Noticed Device Manager doesn't list Radeon HD 5750 -- is using "Standard VGA Graphics Adapter" and "Generic PnP Monitor"
Tried installing ATI Catalyst Control Center repeatedly (Suite version and not), after installing .NET Framework 4 and after removing the existing display drivers. (I'm not sure I removed the existing drivers correctly though. I uninstalled them through the Device Manager and tried using Driver Sweeper to confirm that they were removed, but was unable to get that program to work.) So far CCC gives me an installation success screen, but never appears in the system tray.
Any advice on fixing this would be much appreciated. Thank you for reading.

Hi, unfortunately no, I ended up having to purchase a PC for other reasons before I figured out how to fix this.

Device drivers not installing - therefore not recognised by iTunes

Hi,
Desperately seeking some help with this. Purchased a new iPad 2 couple of weeks ago.
Plugged into laptop to sync with iTunes (already have an iPhone so just wanted to sync some of my content to new device)
The device didnt materialise in iTunes. Now since the new update I hadn't upadated iTunes to version 11.01 or my iPhone to iOS 6 - with the ipad already operating on iOS6 I thought this might have been due to iTunes not being up to date.
So tried to update iTunes - here the problems began.
I cant even remember what happened first, but the update didnt work, and after searching these forums I gathered the safest thing to do was to uninstall iTunes and quicktime and re-install.
I hadn't researched in enough detail to realise about all the other programmes that needed uninstalling as well as the bits that the windows uninstal leaves behind in the registry.
Eventually (took ages) I managed to get around this using Revo uninstaller and completely uninstalled everything and succesfully re-installed iTunes.
It appeared to work fine, update succesful etc..
Then plugged in the iPad and to my dismay still no joy.
After monitoring 'the device driver software is not correctly installed'.
I have scoured these forums for this problem and I think I have tried everything and still no luck at all.
I have re-installed itunes (again - 3 times since the first succesful re-install)
I have run through the iPad troubleshooting assisstant.
I have attempted using device manager to point the system to the driver in Program Files - this just times out, attempted using MSCONFIG to identify any conflicts and no joy.
Attemped launching in another user account on the computer with Admin priveleges - nothing works.
Have obvously tried all USB ports, old and new cables, resetting device etc
Final idea was a warning code Ive had come up upon launch of iTunes after updating:
"Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
I reinstalled the driver for this using regedit but still nothing.
Have also just checked and the system doesn't recognise my iPhone either, which has been synced with this computer hundreds of times in the past.
The decvices do not appear in computer, only device manager with their name (i.e. IPad) with a question mark/warning sign next to it.
Im using windows 7, 64 bit.
Can anyone help, please - before these nice Apple products get thrown from the window - swiflty follwed by my laptop - and I become a technology free monk?
Apologies if re-posting but I cant find anything identical or anything similar that solves the problem and have had enough of it now!!
Only option I can think of is a complete windows reboot which I really don't want to do - especially as I suspect the problem is to do with the Apple software on my PC (which is why Ive posted in iTunes as opposed to iPad)?
Any assistance greatly appreciated, happy to provide more info if helps?
Many thanks

Anyone able to help with this?

Kodak easyshare 5300 drivers not installing on os 10.9

Similar Messages

Maybe you are looking for