Kodak photo cd not seen, won't eject

Hi using a Ti 667 with a combo drive. Installed a Kodak picture cd, it didn't show on desktop and won't eject? Any ideas what I can do other than; the eject button, drive utility eject isn't highlighted, there is no emergency eject? Help! Thanks!

Holding down the trackpad button is a hardware command that doesn't involve the OS and should be executed before the OS begins to load. If it isn't working, that suggests that your optical drive isn't getting any power, and that in turn suggests that its flex cable's connection to the logic board is loose. I would remove the bottom cover from the Tibook, discconnect and firmly reconnect the ribbon cable to the LB, replace the bottom cover, and test again by starting up while holding down the trackpad button. If you still get no reaction, the optical drive is dead or its cable is bad, and one or the other needs to be replaced.

Similar Messages

  • IPad SD photo card not seen

    Have photos on an SD card which is inserted in a "Lightning to SD Card Camera Reader" and connected to my iPad Lightning Connector. The manual says a photo app should open and display the photos. I get nothing! I opened the photo and see only pictures I took with the iPad. What am I missing? Yes, I am a newbie to Apple anything.

    How did the photos get onto the card (and it's not an Ex-FAT formatted SDXC card) ? If you copied the photos onto the card from yoru computer then you need to create a DCIM directory off the root of the card with the photos underneath it, and the photo filenames need to be exactly 8 characters long (no spaces) plus the file extension i.e. in a similar format as if a camera had created/written them

  • Problem: Photo Gallery not working.

    Hello i am new at flash. I created a simple photo gallery
    using flash CS3. I had 11 photos to show and i created 11 keyframes
    and put a uiloader on each one of them. Then i added buttons and
    linled them to the uiloaders. I changed the source values of the
    loaders. So when i clicked a button, the selected uiloader with the
    photo attached to the source of it was seen. It has such a simple
    logic. Because i don't know enough actionscript to do it easier.
    Anyway the problem is i make it work on my computer but when i
    uploaded it to my site it doesn't work properly. I can see the
    buttons but the photos are not seen. I checked the files and
    folders but everything seems right. What might be the problem. How
    can i solve it?

    Try duplicating the folder structure of your website, on your
    local drive. You may need the path from where the html file is, so
    you would add "/mages" to the loaders for instance. Not sure what
    you setup is, but I have found that using LoadMovie, I have to set
    it up so it doesnt work when I test the movie in Flash, but it will
    work when I open the html file...

  • Want to open Kodak Photo CD files (.PCD) in Photoshop CS5.  In CS4 i copied file "Photo CD.8BI"  from an older version into the File Format folder.  This does not work with CS5.  Any fix?

    I have several old Kodak Photo CD with PCD image files.  I am now using Photoshop CS5.  Some years ago while using Photoshop CS4 I copied a file:  "Photo CD.8BI" from an older, CS2, version to the Plug-ins/File Format folder of CS4.  This does not appear to work with CS5.  Any fix?

    It can be made to work, but you have to run the 32 bit version of Photoshop CS5, and as I recall there's an additional DLL called pcdlib32.dll that's needed from the old installation.
    See also:  Open Kodak PhotoCD files in PS CS5 - is it possible? (Win XP)
    -Noel

  • How can I send multiple pictures to the Kodak link (under file & then order prints)? if the photos are not sequential can it be done?

    how can I send multiple pictures to the Kodak link (under file & then order prints)?  if the photos are not sequential can it be done?

    Does the order matter here?Because the photos will be sent for printing. If there is any other reason, can you please cite example.

  • Colormunkie Photo printer profile (*.ICM and *.ICC ) are not seen by LR4.2 in the Print Job section

    Colormunkie Photo printer profile (*.ICM and *.ICC ) are not seen by LR4.2 in the Print Job section
    I used Colormunkie Photo to create an .ICM file for printer calibration.   When that failed I tried changing the suffix to .ICC.  Under neither circumstance did LR4.2 display the file in the menu to select printer profile.  There were several display files with both suffixes but no printer files at all.  I tried three times with no success and cannot think of what else to try. The first two were the same.  I varied the file creation name suffix in the third.  Help will be appreciated. My OS is Win 7 ultimate SP1  Printer is HP 2550L laserjet.

    Tillman
    Glad you found your answer, Colormunki is smart enough to figure out the color space for the printer as I found out - But for quality work the latest generation of inkjet printers from Epson and Canon are hard to beat, and compared to a laserjet the quality is like night and day. The other benefit of changing up to an inkjet printer is the choice of papers available which you could not put through a laserjet.
    I had a colleague that tried printing on Photoglossy paper through his color laser and it fried the fuser, and HP, while they replaced the fuser unit under warranty, made it very clear that that was a daft thing to do.
    So if I were in your position I would go with an inkjet and you will then enjoy the benefits of better quality output, better paper choices and with your Colormunki be able to make custom profiles that will work in LR
    Cheers
    Mike

  • HT201317 photo stream is not working, won't go to PC

    I have 980 pics on my iPhone in the photo stream, not once has it ever sent photos to my PC folder and I've set up iCloud a LONG time ago. I want these pics because my PC crashed, so how do I get them back to PC if it won't upload them?

    Had the same problem. I uninstalled icloud, restarted my pc and reinstalled icloud and it's working fine. Hope this helps.

  • Some of my earliest photos are not showing on my phone after updating to iOS7. They can be seen in the app "over" which allows for art and lettering to be placed on a photo but I can not find an album for photos before 2012.

    Some of my earliest photos are not showing on my phone5 after updating to iOS7. They can be seen in the app "over" which allows for art and lettering to be placed on a photo but I cannot find an album or year for photos before 2012 (in the photo app). The iphone says the photo content is there when I check in "about" under general in settings. So the pictures seem to be somewhere but I just can't access from from the photo app. Any suggestions. I also know that they were there before the iOS7 upgrade as I was looking for a pre 2012 picture last week and it we there.

    Some of my earliest photos are not showing on my phone5 after updating to iOS7. They can be seen in the app "over" which allows for art and lettering to be placed on a photo but I cannot find an album or year for photos before 2012 (in the photo app). The iphone says the photo content is there when I check in "about" under general in settings. So the pictures seem to be somewhere but I just can't access from from the photo app. Any suggestions. I also know that they were there before the iOS7 upgrade as I was looking for a pre 2012 picture last week and it we there.

  • Help!  My photo CD won't eject???

    I routinely upload photos from CD's to iphoto, but a friend gave me a Verbatim CD-R that my eMac won't read, and now it won't eject??? Command/Option-escape doesn't do a thing! JS
    Message was edited by: Kingnitro

    Restart the computer with the mouse button or the eject key on the keyboard held down; if this doesn't work, restart with the Option, Command, P, and R keys held down. In the second case, issue the following commands:
    eject cd
    mac-boot
    (23776)

  • I have an older IMac 5. I installed snow Leopard on. Now my DVD drive is not working. Discs go in but it dosn't boot up or show in finder. Then disc won't eject unless i shut down and restart. HELP !

    I have an older IMac 5. I installed snow Leopard on. Now my DVD drive is not working. Discs go in but it dosn't boot up or show in finder. Then disc won't eject unless i shut down and restart. HELP !

    Snow Leopard cannot run on a PPC G5 Mac as it requires an Intel processor. Please confirm what Mac you have.

  • Mountain Lion won't allow me to save photos from Mail directly to iPhoto (as you could in all other recent OSX).  Tried opening iPhoto and then click/drag each photo onto iPhoto icon on dock (as Help instructed) but the photo will not drag.  Suggestions?

    Mountain Lion won't allow me to save photos from Mail directly to iPhoto (as you could in all other recent OSX).  Tried opening iPhoto and then click/drag each photo onto iPhoto icon on dock (as Help instructed) but the photo will not drag.  Suggestions?

    I have real a lot of posts that say to click Command+Option while opening iPhoto and this will open the Photo Library Repair window, but... this is not happening.
    Be sure you're holding the correct keys and that you're holding them long enough. Depress them before clicking on iPhoto and don't let go until the menu shows up.
    If you don't want to lose those photos, make a back up now. Hopefully it's not too late.

  • My 160MB iPod Classic won't sync from iTunes.  This is a recent problem.  The error message is "The iPod cannot be synched.  An unknown error occurred (-39)." The end result is that music will sync but photos will not.  Current software on Mac and iPod.

    My iPod classic won't synch from iTunes.  This is a recent problem.  The error message reads "The iPod cannot be synched.  An unknown error occurred (-39)." The end result is that the music will sync but photos will not sync.  I am running current versions of software on the iPod and the iMac / iTunes.  HELP! J

    First try to resolve #2 by:
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Try on another computer to help determine if computer or iPod problem
    If you can resolve #1 and still get same message for #1 then you have to restore the iPod like the message says.

  • Hi guys, I recently got a new MacBook Pro with a USB Superdrive. A disc won't eject, does anyone know of a way to eject it? I'm in Morocco for the next 10 days so going to an Apple store is not possible. Any help would be gratefully received, thanks

    Hi guys, I recently got a new MacBook Pro with a USB Superdrive. A disc won't eject, does anyone know of a way to eject it? I'm in Morocco for the next 10 days so going to an Apple store is not possible. Any help would be gratefully received, thanks

    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
      1. Restart the computer and after the chime press and hold down the
          left mouse button until the disc ejects.
      2. Press the Eject button on your keyboard.
      3. Click on the Eject button in the menubar.
      4. Press COMMAND-E.
      5. If none of the above work try this: Open the Terminal application in
          your Utilities folder. At the prompt enter or paste the following:
            /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

  • Game not sopported by Mac won't eject! I tried everything! Any ideas?

    I accidently put a game not supported my Mac and now the game won't eject. Help!

    Hi
    Turn Off Your Mac
    Then turn it On again - BUT NOW KEEP Mouse-button (or equivalent) DOWN during full Up-Start procedure. This will force the DVD-player to Eject.
    Yours Bengt W

  • My iMac will not recognize a blank DVD-R that I am trying to burn. It also won't eject unless I "shut down"

    My iMac will not recognize a blank DVD-R that I am trying to burn. It also won't eject unless I "shut down" and restart while holding down the mouse button. Anyone have any remedies?

    I ran into a similar (identical?) problem.  I inserted a DVD-R and my imac would not recognize it.  The only way to eject was to do a restart.  I tried some of the SMC reset stuff.  That didn't work.  I came across another thread on macrumors (http://forums.macrumors.com/showthread.php?t=336501)
    that solved my problem.
    I have an external Western Digital Passport drive that I use for timecapsule.  It turns out
    there are two files that WD adds to the /Library/LaunchDaemons that interferes with the
    SuperDrive.  I removed the WD files from the LaunchDaemons directory and everything works fine
    now.  Again, refer to the macrumors thread for more details.
    The files I removed from the LaunchDaemons directory were:
    com.wdc.WDDMservice.plist
    com.wdc.WDSmartWareServer.plist
    ..yes I had installed the WD backup software to see if I liked it....I did not, but didn't realize this files would cause a conflict with the SuperDrive.

Maybe you are looking for