Kodak printer Hero 9.1 not working on Lion.

I have Kodak printer Hero 9.1 working on ethernet via BT home hub from iMac and old PC (XP Pro). It worked fine with Snow Leopard then I upgraded to Lion.
Now Kodak software reports Error 200-1033 "Unable to connect to printer" always after the first print after installing Kodak software and adding printer in the Control Panel. But PC continues to work fine for printing and scanning.
Have gone through the Kodak support suggested fixes many times. Check wiring, check connections etc etc. plus multiple cycles of uninstall and reinstall. Have also set up Static IP address for printer.
Any ideas or am I looking at a new printer if Kodak and Apple are not talking? (Printer and company wise.)

iOS devices can only print directly to AirPrint printers.
To print directly from an iPad / iPhone you will need an AirPrint compatible printer or another device to act as a print server. That can be a Mac computer running Printopia ($19.95 with free trial) or AirPrintActivator (donation - supported). The Mac must be "on" but may be asleep for them to work. Equivalent PC options exist but you're on your own finding them.
You can also buy this standalone print server:
http://www.lantronix.com/it-management/xprintserver/xprintserver.html
These options enable you to use any printer available to your Mac, even older ones that may predate AirPrint by decades. Otherwise you will need to buy an AirPrint printer or multifunction device.

Similar Messages

I have a kodak printer hero 5.1, it prints or scans 2 or 3 jobs then loses comms with mac although the wifi light is still on. I tried to uninstall software but when I go to printers folder "no such folder message" . Any advice appreciated.

I have a Kodak printer hero 5.1, it prints or scans 2 or 3 jobs then loses comms with mac although wifi light is still on. I have tried to remove printer by deleting in preferences but when i try to go to printer folder " no such folder " message appears. Any advice appreciated.

Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

VS2005 Crystal Report Print Report Button is not working on Windows 7 x64

Hi There,
My application is written in VS2005 C# on x86 machine. It runs smoothly on XP pro and Vista x86 machine.
I deployed the same to windows 7 x64 machine with CRRedist2005_x64.msi and found that the Print Report button is not working.
So, I re-compiled my application to x64 target platform, and reinstall the application to the same machine. But nothing changed. I have surf for answer over the web but nothing found.
Please help urgently. Any helps is much appreciated. Thks in advance.
Edited by: chanpyvivian on Mar 26, 2010 11:14 AM

I follow your instruction as below:
1) download the sample app vbnet_win_printtoprinter.zip to dev computer and compile it to .NET 2005.
- Run from my dev computer
- Click "Print Report" button
- Error message display - please see below
    The error was due to the default printer name hard coded in the program was not found. I have edited to my printer name and it can be printed out with no error.
2) Use a "saved data" report so that you do not have to worry about database logon.
can't find the "saved data", please elaborate
3) Then copy the exe to the 64 bit box and try to print using this sample app.
-do you mean copy the exe to the 64 bit computer for testing ?
ERROR Message
CrystalDecisions.CrystalReports.Engine.InvalidArgumentException:
Invalid printer specified. ---> System.Runtime.InteropServices.COMException (0x80000201):
Invalid printer specified.
   at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal)
   at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value)
   at CrystalDecisions.CrystalReports.Engine.PrintOptions.Copy(PrintOptions src)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_FormatEngine()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at PrintToPrinter.Form1.Button1_Click(Object sender, EventArgs e) in C:\Crystal\CRNET\vbnet_win_printtoprinter\vbnet_win_printtoprinter\Form1.vb:line 91
OK
Edited by: chanpyvivian on Mar 30, 2010 6:18 PM

Printer Power button in not working,no light indication

Hi,
HP Deskjet F2400 Series
My Printer Power light is not working, and Indicator lights are also not blinking. but Scanner is working fine. Also an error message showing "Cover is open".but the cover is closed properly. There is a problem with printer.
kindly, provide the solution.
Thanks,

Hi RamyaVemuri,
Welcome to the HP Forums!
I see that your printer power button is not working, and that their is no light indicators.
I think this guide should help. 'The Cover is Open' Message Displays on the Computer.
If that doesn't work, please respond with the type of printer you have as their are multiple Deskjet F2400s. Finding Your HP Product Model Number.
Hope this helps, thank you for posting.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Photoshop CS5 Print Settings button does not work

Photoshop CS5 (updated to newest version 12.0.4) Print Settings button does nothing regardless of printer requested. Does not work with either an HP1102w or a Cannon Pro9000 Mark II. I have deleted printers and reinstalled but it still doesn't work. Using a Mac Mini with OS 10.7.5
Message was edited by: HCASED

Received this from Black Magic:
From: Albert Chu [[email protected]]
Sent: Friday, April 03, 2009 7:11 PM
Subject: Re: For Albert: ISSUE: Playback Settings button in BlackMagic (Intensity Pro) project not working
Importance: High
Hello Joe,
Funny enough, I was just about to run this test and happened to check with another tech about this. Apparently another customer had gotten in touch with us regarding the same issue and after confirming this, found that it is a bug. As such, this has been logged and we should hopefully see a fix for it in our future updates.
Please continue to check our software downloads page for this update (we do an update roughly every 6 to 8 weeks). Thanks for your patience.
Regards,
Albert Chu
Support Engineer
Blackmagic Design Inc.
www.blackmagic-design.com

My cannon printer worked with snow leopard but does not work with Lion

My Mf 4350d printer does not work with lion Mac OS X Lion 10.7.2., it worked with Snow leopard no problem. I am a novice with apple so can you tell me how to do any changes carefully.

Have you downloaded and installed the latest Canon printer drivers?
http://support.apple.com/kb/DL899

Windows Server 2012 - Printing using UNC path not working

Hi,
I have a problem printing using the printer's UNC path ("\\Server_Name\Printer_Hostname") to work with a web
app hosted on IIS 8. With a windows forms application the UNC path is working fine and the app prints.
With
the web app I receive an error "The data area passed to a system call is tool small".
Also,
in the event viewer under Applications and Services Logs -> Microsoft -> PrintService -> Operational, I receive the error "The print spooler failed to reopen an existing printer connection because it could not read the configuration information
from the registry key S-1-5-82-1980832875-2702362896-1795126167-3622310632-1152289074\Printers\Connections. The print spooler could not open the registry key. This can occur if the registry key is corrupt or missing, or if the registry recently became unavailable."

I have contacted IIS forum support.
Please review the link: http://forums.iis.net/p/1213109/2079229.aspx?Re+Windows+Server+2012+Printing+using+UNC+path+not+working
Their final response:
Printing from ASP.NET using System.Drawing.Printing itself is a horrible approach, as this namespace was designed for Windows Forms only. The designers did not take everything about ASP.NET in mind, so any issue can happen. That can answer why the HP model
works while the Samsung fails, as the HP one just "happens
to work",
http://msdn.microsoft.com/en-us/library/system.drawing.printing.printdocument.aspx
Similarly, System.Printing was designed just for WPF.
About which printing API to use in ASP.NET/IIS, there is no clear answer so far. Thus, your only resource is Microsoft support, who can perform further analysis (with their dedicate utilities and of course Windows source code) and might come across a solution
to help you out. This is not a trivial scenario.

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

How can I go back to snow leopard my epson stylus Photo TX810FW does not work with Lion

My Epson Stylus Photo TX810FW printer does not work with Lion how do I go back to Snow Leopard?

Did you try removing the printer from the queue and then reinstalling it?
I attempted to print this morning for the first time after upgrading to Lion and discovered that while everything appeared normal on my Epson printer, it would never print.
I opened System Preference > Print & Scan and deleted the printer.
I then added the printer back and it now working again. Worth a shoot first I should think.
Much easier the a downgrade.
Allan

Safari is not working in lion. I get the message not responding. Please help.

Safari is not working in Lion. I get the spinning ball. Please help.

We do not provide support for bugzilla here. Please visit http://www.bugzilla.org/ to find out how to get help.

External Hard Drive does not work with Lion

Hi
My External Hard Drive does not work with Lion this message appears:
NTFS-3G could not mount /dev/disk1s1
at /Volumes/My Passport because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)
can anyone help?

Hi,
See this Discussion:
https://discussions.apple.com/thread/3191198?start=0&tstart=0
Cheers,

Adobe Photoshop CS5 is not working with Lion.

Adobe Photoshop CS5 is not working with Lion. It is totally non responsive to a point where i cannot work. all other CS5 programs seem to be running well so far. any advice? if no, then how do i revert back to Snow leopard?

I had real problems with all Adobe apps - it said I needed to install a version of Jave Runtime, but kept saying that I wasn't connected to the internet to complete the action. This was not the case - I was connected to the internet.
I followed this link : http://support.apple.com/kb/DL1421 to install a version of Java and all Adobe apps fire up now. Haven't done much testing within the apps, but at least I'm further ahead than I was.
So thanks to the message boards for helping me out.
Reg

IPhoto 9.1.5 slideshow is not working on lion

Hi,
my iPhoto 9.1.5 is not working on lion. I have upgraded from Snow Leopard to Lion. If i click on slideshow then it seems to be started with full screen but it return back without slideshow.
Waiting for any clew.
Moshiour

For iPhoto 9.1.5:
http://support.apple.com/kb/HT4754
Regards,
Colin R.

Ukelele generated custom keyboard layouts not working in Lion?

I asked this question in the stackexchange site a few days ago. Nothing I've tried has worked so far, except for creating a new account. Because a fresh account works, it's got to be something with my preferences, right?
http://apple.stackexchange.com/questions/21691/ukelele-generated-custom-keyboard -layouts-not-working-in-lion
Here's the question from above:
I created a custom keyboard layout with Ukelele (http://scripts.sil.org/ukelele) in Snow Leopard (idea is to generate scandinavian letters with Alt-key, otherwise have a pretty much standard U.S. layout). After the upgrade, the old installed (to ~/Library/Keyboard Layouts) layout wasn't working.
Ukelele seems to work OK in Lion, but whether I put the generated keylayout in a bundle or single file, or save it "/Library/Keyboard Layouts" or "~/Library/Keyboard Layouts" doesn't seem to matter.
Help?
EDIT:
@Sergio, I cannot choose the layout in Input Sources. One keylayout file I tried:http://semeai.org/~sjl/us-scands.keylayout
[EDIT: Removed unrelated stuff]
UPDATE 2011/08/15:
@Tom:
Copied your keylayout (it naturally ended up in my Junk folder):
midgard (01:55) >ls -l ~/Library/Keyboard\ Layouts/MongolianQWERTY.keylayout-rw-r--r--@ 1 sjl staff 44536 Mar 13 2008 /Users/sjl/Library/Keyboard Layouts/MongolianQWERTY.keylayout
Logged out, logged in, isn't showing in Input sources (I'm looking very closely between "Maori" and "Myanmar - QWERTY").
I've also uninstalled bunch of software and plugins giving suspicious messages to system.log, but hasn't helped.
UPDATE 2011/08/16:
I created a test account, and lo, the layout works perfectly for it. Also the bug in preferences doesn't show for that account. When trying this on my own account, there are no errors in Console logs with the suggested keywords (I can't seem to locate console.log file, though).
UPDATE 2011/08/16 later:
Nuking Library/Caches (and relogging) didn't help.
UPDATE 2011/08/17:
I did
% find Library -name "*.plist" -exec mv {} {}.renamed \;
and restarted, but it didn't help. I restored the situation with
% for file in `find Library -name "*.plist.renamed"`; \ do mv "$file" "${file//.renamed/}"; done
addendum: I also went through all the .plist files with plutil -s as described inhttp://www.askdavetaylor.com/can_i_check_my_plist_files_in_mac_os_x_for_problems .html. There was some brokennes, but in very unrelated applications.

Tom,
I think I love you.
That absolutely did it! Thanks so much!
If you'll answer with the same link in the stackexchange site, I'll mark the answer as correct, so you'll get the rep there.
Thanks,
Sami

Wish I would have known Quicken 2007 would not work under Lion OS. I had no reason to believe it wouldn't. Any ideas for me?

Wish I would have known Quicken 2007 would not work under Lion OS. I had no reason to believe it wouldn't. Any ideas for me?

I switched to Essentials while using Snow Leopard in anticipation. Data conversion was pretty good. Nothing critical was lost, but I did have to reassign some budget catergories for past transactions. It was a good opportunity for some cleaning up that I should have done anyway. They have a 60-day return policy on the Quicken web site which was key to my purchase decision.
I am not affiliated with Quicken in any way other than as a customer. I'd have preferred it if they had updated 2007 but they didn't!

Kodak printer Hero 9.1 not working on Lion.

Similar Messages

Maybe you are looking for