Kodak printer will not work after upgrading to Yosemite.. Please Help

I have uninstalled and re installed my kodak 5250 more than once and it still does not work. I have carried out a clean install of my Yosemite OS and still no joy. How do i fix this?

I've got the 7250 as well -- same exact issue. I sent an e-mail to Kodak support on Friday last week -- haven't heard anything, but they did ask for 2 business days time to respond.
I've been running the Yosemite Beta on one of my machines for a few months now and my printer stopped working on that one after the upgrade. I kept Mavericks on my other Mac until this weekend, and printing still worked from that machine until I upgraded to Yosemite over the weekend.
I've got Linux and Windows virtual machines that can print to the ESP 7250, so I can still print, albeit with the hassle of firing up a VM and printing from there... I sure hope Kodak responds! I offered to help them test any beta-quality drivers they may have, so -- we'll see what they say!
I've been planning to ditch the printer and get a new one, but I'd rather not have to do it right this minute just for a driver issue :-/

Similar Messages

Mail application will not open after upgrading to Yosemite. HELP !!

After upgrading to Yosemite, my mail will not open...
I get the following message;
The last time you opened Mail, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again?
Options are Don't Reopen or Reopen....

Hi Clickchris,
CS5 Photoshop is supported on Mac OS 10.5.7 and 10.6.
It has not been tested on Yosemite as it is a very old version of the product.
Please refer to below document.
http://helpx.adobe.com/photoshop/system-requirements.html#main_Photoshop_CS5_system_requir ements
Thank you for posting on Adobe Forums.

Photo stream not working after upgrading to maverick please help?

have upgraded to Maverick from osx lion
sooo much trouble ......memory low
photo stream not working
everything slow
any ideas?

On your Mac disable Photo Stream in the System/iCloud preference pane
and in iPhoto's Photo Share preference pane.
Reboot and reenable both respectively. That should jump start Photo Stream.
OT

Messages will not work after lots of troubleshooting - please help

Hello, I'm having difficulty with Messages.

I apologize for the short initial post... I tried to insert images of the issues I am having and the support board deleted my entire message and said "We'll Be Right Back!" LOL
I installed 1Password today, changed my iCloud password, and Messages went kind of bizzarro on my iphone from there. I restored my iPhone and now iMessages works on that little guy again. I'm not successful in getting it to work on the Mac however.
I have tried all the instructions listed by Linc in another post, but was unsuccessful correcting the problem after moving the .plist files, or deleting them
The messages pane is completely empty. The "preferences" and "add account" selections under Messages are greyed out. I was trying to insert an image of that earlier....
Here is everything else I have done:
1. I logged into the guest account, and was able to use Messages without issue
2. I logged completely out of my iCloud account on both my iPhone and the Mac
3. I was successful in logging into FaceTime, but again, Messages is MIA
Thank you in advance for any help you might be able to offer. I will post back shortly with the link to the thread instructions from Linc ASAP

ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

Follow these steps:
go to system preferences.. Open Network..
CONFIGURATION: DEFAULT
TELEPHONE NUMBER : #99*
leave account name and password columns blank
Now go to ADVANCED
IN MODEM MENU
VENDOR : GENERIC
MODEL : GPRS / 3G
Press ok
Then CONNECT.. Enjoy.

Printer will not work after update to Mavericks

I have a macbook pro and an HP7280 printer connected wirelessly. After upgrading to Mavericks the printer will not work. The first time I used it the system upgraded automatically (I forget what it said but it just went ahead and did some upgrading) When I clicked on something to print it did recognized the printer but just scrolled and scrolled and never printed. So I deleted the printer and reset the system and then added the printer back on - same thing. Any ideas??

It means there is no issue with the driver you are using and with it working correctly on Mavericks. So you have a network issue with the printer queue you are using. Normally a reset of the printing system and re-adding the printer would be enough to get things working again. But since you have done this and your issue is not resolved, there must be some other gremlins in the system.
With the HP connected to the network, if you know its IP address you can enter this as a URL into a web browser. This should result in you connecting to the internal web page of the HP. Does this work?

Facetime will not work after upgrade to io6 can anybody advise?

Facetime will not connect after upgrade to IO6 can anyone advise?

Hey there,
Maybe start here
[Troubleshooting Automatic Software Update in Mac OS X|http://support.apple.com/kb/HT1569].
Otherwise, try deleting this file. com.apple.SoftwareUpdate.plist located at /Users/YourName/Library/Preferences. Drag that .plist file from the Preferences folder to the Trash, empty the Trash and restart your Mac.
Have you tried resetting your widgets by hitting Command-R? If that doesn't, work trying trashing the two dashboard preference files.
The two dashboard preference files are in the following directory:
yourusername -> Library -> Preferences ->
The file names are:
com.apple.dashboard.client.plist
com.apple.dashboard.plist
Hope this helps.
B-rock

Kodak ESP 3200 stopped working after upgrading to Yosemite

Kodak ESP 3200 stopped working after upgrading to Yosemite

Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite"). Perhaps it would have the same effect with some other kinds of printers that aren't supported in Yosemite. I have no information about that, one way or the other.
I have not tested the hack myself and I don't know all the possible effects. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the web administration interface of CUPS. That interface is not enabled by default, and will not be enabled by the procedure described here. Even if it were enabled, I know of no way it could be exploited, with or without the modification. Nevertheless, if you have enabled the web administration interface, you should disable it if you decide to follow these instructions. If you don't know what the web administration interface is, you haven't enabled it.

CS5 will not open after upgrading to Yosemite

CS5 will not open after upgrading to Yosemite

Hi Clickchris,
CS5 Photoshop is supported on Mac OS 10.5.7 and 10.6.
It has not been tested on Yosemite as it is a very old version of the product.
Please refer to below document.
http://helpx.adobe.com/photoshop/system-requirements.html#main_Photoshop_CS5_system_requir ements
Thank you for posting on Adobe Forums.

My macbook pro run slowed after upgrade to Yosemite, please help!

Why my mac slowed after I upgrade to Yosemite, Please help!

You might want to update your profile. Helps people trying to help you.
Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy
Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor. Please use copy and paste as screen shots can be hard to read.
Etrecheck – System Information

My HP LaserJet 1536 Scanner will not work after upgrading to Windows 10

I just upgraded to Windows 10, and now the scanner will not work, although I can still print. I downloaded the latest driver, but this does not seem to help. The error message I get states that scanner communication cannot be established. Please let me know if you have any suggestions. Thanks!

Greetings , I saw your post regarding the problems you are having with scanning after upgrading to windows 10.
I would start with the simple, have you tried just restarting the computer? Have you made sure your computer has all of it's windows updates? How can I tell if my computer is up to date? Most products do have updated software available for Windows 10, did you install the correct driver?HP LaserJet Full Feature Software and Driver I've also seen a few posts that say the Windows 8.1 driver will work for Windows 10 as well, so you could try that too.  HP provides a free tool called HP Print and Scan Doctor to diagnose and resolve printing and scanning problems. I recommend downloading and running the HP Print and Scan Doctor, if it doesn't fix it automatically let me know what errors or messages you receive.  Do you know if you are able to scan using Paint? To Scan from Paint: HP Multifunction Printers - How to Scan: Windows 8
(It's the same for Windows 10, from what I've been told)Right-click the Start button () in the lower left corner of the screen, click Search, and then type ...Click Paint in the results.Click File, and then click From scanner or camera.Select your printer, click OK, and then click Scan.  Have you tried just using the New Scanner app in Windows 10? It's the same as the one for Windows 8. Here are some resources;New Scanner app in Windows 10Scan app for Windows: FAQ
And a Video link...    Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!  Thanks,

Hp laserjet cp2015dn not working after upgrading to Yosemite

After upgrading to OS X Yosemite 10.10.3 my HP Laserject CP 2025n printer is not working. It worked perfectly in the old system. I have tried deleting hte printer. Then when I add it back on it gets to the steps wher it says Setting up HP Color Laserect CP2025dn and it stalls (it stays at this step for more than 3 minutes) . It says "Setting up the device" In this window I have two options configure or cancel. After waiting 5 min I selected connfigure but this does not work.
I tried turning it off/on before trying a second time, this did NOT work.
I checked for new drivers, there are none. I seem to have the latest.

OS X Yosemite: Reset the printing system

Iphoto Not Working After upgrading to Yosemite

I am unable to use iPhoto after upgrading to Yosemite.
I have two apple id and when I used one of them i get the message This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled'. I am unable to use the other which might the registered Apple Id since the option to log in does not appear. What do I do?
I can't use iPhoto and the iPhoto library to does not work

I am unable to use the other which might the registered Apple Id since the option to log in does not appear. What do I do?
Sign out of the App Store and then sign back in with the other Apple ID.

External Hard Drive will not mount after upgrading to Yosemite

After upgrading to Yosemite, my external 3TB hard drive will not mount... can't see in Finder, but does appear in Disk Utility. Follow steps to Repair disk, but get a message that D.U. cannot repair disk.

See mount section.
Disk Unmount Using Terminal
Disk Utility – Force Mount Disk

Pacman will not work after upgrade, but webbrowsing works fine

As topic stated. sudo pacman -Syu gives:
:: Synchronizing package databases...
error: failed retrieving file 'core.db.tar.gz' from mirror.archlinux.no : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from mirror.archlinux.no : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from jane.tihlde.org : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from jane.tihlde.org : Transient resolver failure
error: failed to update core (Transient resolver failure)
error: failed retrieving file 'extra.db.tar.gz' from mirror.archlinux.no : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from mirror.archlinux.no : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from jane.tihlde.org : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from jane.tihlde.org : Transient resolver failure
error: failed to update extra (Transient resolver failure)
error: failed retrieving file 'community.db.tar.gz' from mirror.archlinux.no : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from mirror.archlinux.no : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from jane.tihlde.org : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from jane.tihlde.org : Transient resolver failure
error: failed to update community (Transient resolver failure)
error: failed to synchronize any databases
Yet internet in general works fine. This happened after an upgrade, but I can't remember what was updated because I went on a holliday right after the update. I have a kernel oss linkage error at boot, but don't know if this has anything to do with it. Is there any thing I could paste to help solve the matter?

Session wrote:
The new module-init-tools 3.8 package changes the location of the configuration file: /etc/modprobe.conf is no longer read, instead /etc/modprobe.d/modprobe.conf is used. Files in /etc/modprobe.d without a .conf suffix will be ignored in the future.
Please adjust your local configuration files after the update.
The way I read this is that I can delete /etc/modprobe.conf and all files/folders in /etc/modprobe.d that does not contain .conf suffix?
Not quite, if you have anything in /etc/modprobe.conf you still want to be read it should be moved into /etc/modprobe.d/modprobe.conf, and anything that's already in modprobe.d/ should get renamed so it's called *.conf

Kodak printer will not work after upgrading to Yosemite.. Please Help

Similar Messages

Maybe you are looking for