Kodak pro back 645

Anybody knows where should I request support for an old Digital Back? Kodak ProBack 645
I have a lot of raw files of this DB. Lightroom supports these raws but I want to add them to Aperture

There are many raw convertors which support Kodak Pro Back (Lightroom/ACR, Raw Developer, Raw Therapee, Silky Pix, RPP (best) etc). So I even don't look towards DNG. ) I just want to store ALL my raws in one good catalog software. I don't like Lightrooom and it's color redention and because it is not MacOS-native. If Apple will not add support then I just continue to store my files in folders and convert with RPP
By the way — topic about this digital back with a lot of examples developed mostly in RPP
http://wowcamera.info/viewtopic.php?f=7&t=4
http://www.dpreview.com/forums/post/50486513

Similar Messages

  • Does anybody know how I can get my Mac Book Pro back, which was stolen during a presentation I was attending. I have the store receipt, however I had not installed i Cloud in my mac Book?

    Does anybody know how I can get my Mac Book Pro back, which was stolen after a class I taught?
    I have the store receipt, its serial number, however I had not installed i Cloud on my Mac Book and I'm not able to find my Mac back.
    Thanks for helping me!

    Sorry to say but you are out of luck.
    What To Do If Your Mac Is Lost Or Stolen
    If you activated Find My Mac before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi. What you cannot do is track your computer using a serial number or other identifying number. You cannot expect Apple or anyone else to find your computer for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty. Be sure to report the loss or theft to the local police. Have the serial number handy. If your Mac is found it cannot be returned to you if you don’t have the serial number and proof of purchase.
    Find My Mac can be used from Find My Phone at iCloud.com and via Find My Phone on your iDevice.
          The following is third-party anti-theft software:
               1.  STEM 2.1
               2.  MacPhoneHome 3.5
               3.  MacTrack 7.5.0
               4.  VUWER 1.7
               5.  Sneaky Bastar* 0.2.0
               6.  Undercover 5.1.1
               7.  LoJack for Laptops
               8. Hidden 2.0
               9. Prey 0.6.2

  • Kodak Pro Photo CD

    I think I know the answer to this question but I thought I would ask anyway. I have some Kodak Pro Photo CD's with images that are very important to me. Adobe Photoshop and Lightroom no longer will open these disc. iPhoto will open the images but sorry, I dislike iPhoto very much. My question is will Aperture open images from Kodak Pro Photo CD?
    Ideally, I would like to finely adjust and balance these images, and archive in the .dng format. I do not own Aperture but if it will help to do what I want I am willing to give it a try. Any assistance is appreciated in advance.

    I believe that Graphic Converter (a most handy photo app to have around) is still licensed to be able to open them.  Once open you can save the images to a standard folder and then import into Aperture.  Buy it from the App Store.
    If I can find one laying around, I will test.
    You can email Thoreston Lemke and ask about Graphic Converter -- use support at lemkesoft.com.  Can find at http://www.lemkesoft.com/contact.html
    Ernie

  • In mountain lion does the late 2011 macbook pro back up while it is asleep

    In Mountain lion does the late 2011 macbook pro back up while it is asleep?

    No. No computer backs up while asleep.

  • Moving to Logic Pro (back really I was a Logic user on PC)

    moving to Logic Pro (back really I was a Logic user on PC)
    What is the best amount of RAM to start with in the best chip pair arrangement?
    As in 2 chips x 4 gig = 8 gigs total. would like to leave room to up grade so starting with either 8 or 12 gigs. Using Logic and Kontact sounds files.

    Hi
    Indeed, early MacPros work best with RAM in matched pairs.... I had assumed that the OP was working with a MacPro post 2009, rather than a 2008 model
    Perhaps these links will help clarify for the OP:
    http://manuals.info.apple.com/enUS/MacPro_Early2008_MemoryDIMMDIY.pdf
    http://manuals.info.apple.com/enUS/Mac_Pro_2009_2010_Memory_DIMMsDIY.pdf
    For 2009-2010 models:
    "Single-Processor Memory
    For optimal memory bandwidth, all three memory channels should be used, and memory should be balanced across the three channels.
    Dual-Processor Memory
    For optimal memory bandwidth, all six memory channels should be used, and memory should be balanced across the six channels.
    Note: Populating slot 4 (or 8) slightly drops maximum memory bandwidth, but depending on the applications used, overall system performance may benefit from the larger amount of memory."
    HTH
    CCT

  • Does the mac pro back up to i cloud automatically

    does the mac book pro back up automatically to the i cloud?

    iCloud is not a backup system for your Mac, so the answer is no, not automatically and not manually. Not at all is the best description. Time Machine is the Mac backup system and you already have it.

  • Exporting from Final Cut Pro back to DV tape

    Is it possible to export a project done in Final Cut Pro back to mini DV tape? I need to do it in order to put in on a Windows machine at school. Or, is there a way to export it so I can import it into a Windows machine to use with Final Cut Pro? Thank you.
    iMac Intel   Mac OS X (10.4.7)  
    iMac Intel   Mac OS X (10.4.7)  

    Is it possible to export a project done in Final Cut Pro back to mini DV tape? I need to do it in order to put in on a Windows machine at school.
    Yes,
    - hook up your camera to the computer via firewire
    - put the camera in VTR mode
    - push RECORD on the camera
    - play the timeline
    - STOP recording when the sequence is complete
    - your material is now on the tape.
    Gotchas ...Make sure you have set the display and the audio to be sent out firewire to the external monitor (aka your camera).
    For an alternative to the process described above, read the manual section on "Print to Tape".
    Once at school, your windows machine needs the ability to capture video material.
    Or, is there a way to export it so I can import it into a Windows machine to use with Final Cut Pro?
    Final Cut Pro does not run on a Windows machine. I don't understand your question.
    good luck.
    x

  • Hello, Please Help! When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync. Please Help!!!

    Hello, Please Help!
    When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync.
    Please Help!!!
    Edgil

    Make sure your easy setup has the correct frame rate for your sequence.  Seems crazy but somehow or other fcp assigns a frame rate to audio files.   I've found this can sometimes be tricky to get right.  Here's what I've done to force the issue.  Make sure the easy setup frame rate reflects that of the target sequence in fcp.  Create a new project.  import the audio in the new project.  And then copy the clip from the new project to your main project. 
    Good luck

  • How do you restore a MacBook Pro back to the original out of the box state

    How do you restore a MacBook Pro back to the original out of the box state

    Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 or earlier, when you reach step 5, insert its original disk, restart with the C key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
    (114883)

  • Migrate from snow leopard (macbook pro) back to Leopard (powerbook) ???

    My powerbook g4 (tiger) started with the kernel warnings--got a macbook pro.  Luckily I was able to pull the hard drive out of the powerbook and use an external firewire enclosure to transfer everything on to the macbook pro.  Put a new hard drive into the powerbook and loaded leopard, but the old hard drive in the external enclosure now doesn't want to work.  Can I transfer all those powerbook files (now on the macbook pro) back to the powerbook with the new drive via firewire or migration?  Or does going backward from snow leopard to the powerbook with leopard create issues???

    PowerPC architecture and Intel architecture are different and are not backwards compatible.If you transfer files by Target Disk Mode that will work but you cannot take a clone of 10.6 as a bootable volume and transfer it back two OSX versions and one incompatible architecture. 

  • My Cu Crashed and I reloaded it. How do I get quick Time pro back?

    My Cu Crashed and I reloaded it. How do I get quick Time pro back?

    If you purchased within the last 18 months you can find it your Apple Store account info.
    If older you're out of luck if you didn't save the email that was sent from Apple.

  • How can I revert my audio clips that I have edited in Soundtrack Pro back to the original audio?

    I edited a project in FCP6 and sent numerous audio clips to Soundtrack Pro where I sampled and removed some AC and fridge compressor
    hum from some interview footage.  I'm sending the project out for professional sound mixing and they advised me to restore the original
    audio to prevent the creation of artifacts when they process the sound in a different program. 
    Is there some way to "revert" all my clips that I edited in Soundtrack Pro back to the original audio without going back to
    my original interview footage and cutting in clip by clip?  (Next time I'll save my original audio on a duplicate timeline -- live and learn!)
    Thanks in advance for any helpful ideas!

    What happens if duplicate the sequence, then choose one of them to use "match frame" to get back to the original clips?
    x

  • I purchased the Microsoft Office last September at an Apple Store. I recently had to bring my MacBook Pro back to the store because of some issues. Reboot caused me to lose Office and I no longer have the passcode. Where can I find my duplicate code?

    I purchased the Microsoft Office last September at an Apple Store. I recently had to bring my MacBook Pro back to the store because of some issues. Reboot caused me to lose Office and I no longer have the passcode. Where can I find my duplicate code? I no longer have the receipt so I can not call the business to find my duplicate code. Looking back at my bank statements, this purchase was quite spendy so I hope I will not have to purchase it again if possible! Any advice would be great!

    It should be on a stickerthat says product key on the inner sleeve inside the bos which the disc comes in.

  • I just upgraded my system to Mountain Lion. If I restore my Macbook Pro back to the very beginning state, will the Mountain Lion be removed or not? Thank you

    I just upgraded my system to Mountain Lion. If I restore my Macbook Pro back to the very beginning state, will the Mountain Lion be removed or not? Thank you

    The only problem that I forsee is that some have reported problems getting machine-specific builds of Lion via Internet Recovery. Not sure if it's working yet or not. But you could give it a shot, I suppose. Basically what you want to do is 'prepare your computer for resale' - just like it came out of the box. Kappy, a pretty wonderful and very knowledgeable man, has tip for that which I have copied and will paste below:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
        1.    Select Disk Utility from the main menu and click on the Continue button.
        2.    After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
        3.    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
        4.    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Good luck,
    Clinton

  • HT2471 How do I recover my Mac Book Pro back to the day I purchased it? Will I lose the apps that came with this Mac Book when I recover it?

    How do I recover my Mac Book Pro back to the day I purchased it? Will I lose apps that came with the Mac Book if I recover it?

    Press the command and r keys when turning on your Macbook.  Do not release those keys until you see the apple logo...
    Disk Utility will pop up.....Your choices are to reinstall, you will not lose anything....
    if however, you decide to format/erase your drive, then reinstall, you will lose everything...
    suggestion - back everything up and do a clean install.
    good luck

Maybe you are looking for

  • Email accounts with same user id

    Hi, how can we create 2 different email accounts in different domains with the same user id's . When i try to create an email account with a username thats already exist it shows the message that, 'user already exist' Is it not possible to create 2 d

  • Can't download itunes on widows 8 pc., can't download itunes on widows 8 pc.

    I have been trying to download Itunes on my new windows 8 computer since yesterday but it does nothing. It doesn't even open a download window. It goes to the download page you press download then nothing. I have no idea what is going on. I thought i

  • What is the best way to create a 3d map for flash/actionscript?

    Hi what are good and easy to use tools to create a 3d map/world - terrain, buildings, .... - for use in flash? ideally I would be able to control the objects with actionscript. thanks, Chris

  • Schema Problem after system copy

    Hi Gurus, I did datafile copy after bringing down the source system & then recreated the DB in another system with another SID but target DB still shows schema name which refers to old domain & also all the tablespaces names are SAP<oldSID>. Is there

  • Accessing ALL files in a Folder

    hello all... in my program, i need to access "ALL" the files in a specifc folder in my PC and process the same in the program. pls let me know how to access the same... regards.. vishal