Kodak Q-60 IT8 to profile the Epson 2400 scanner

I am trying to create an ICC profile for my Epson 2400 scanner with the Kodak Q-60 IT8 Target Reflective. My Adorama receipt has the numbers 1907914 so I am assuming that is the file I need to go with the scan I need to do. The 5x7 card is label Q-60 Color Input Target and has IT8.7/2-1993 200:01 at the bottom. When I download the data files from the ftp (ftp://ftp.kodak.com/GASTDS/Q60DATA) site, the IT8App is not able to launch because it needs the Classic Mac Mode to read files.
This is my first time doing all this. I would greatly appreciate any assistance.
Carlos

Hello Carlos
Is your Epson Driver up to date?
http://esupport.epson-europe.com/ViewArticle.aspx?lng=en-GB&kbid=318461&data=+ab 4PwTTw7eujySdvU002F04GiMun4oEc0ki
I haven't needed to re-calibrate anything with my Epson all-in-one, both scans & prints match the display perfectly.
It just works!
Dennis

Similar Messages

  • Kodak Q-60 IT8 to calibrate the Epson 2400 scanner

    I am trying to calibrate my Epson 2400 scanner with the Kodak Q-60 IT8 Target Reflective. My Adorama receipt has the numbers 1907914 so I am assuming that is the file I need to go with the scan I need to do. The 5x7 card is label Q-60 Color Input Target and has IT8.7/2-1993 200:01 at the bottom. When I download the data files from the ftp (ftp://ftp.kodak.com/GASTDS/Q60DATA) site, the IT8App is not able to launch because it needs the Classic Mac Mode to read files.
    This is my first time doing all this. I would greatly appreciate any assistance.
    Carlos

    Hello Carlos
    Is your Epson Driver up to date?
    http://esupport.epson-europe.com/ViewArticle.aspx?lng=en-GB&kbid=318461&data=+ab 4PwTTw7eujySdvU002F04GiMun4oEc0ki
    I haven't needed to re-calibrate anything with my Epson all-in-one, both scans & prints match the display perfectly.
    It just works!
    Dennis

  • What version of Photoshop Elements came with the Epson V500 scanner?

    What version of Photoshop Elements came with the Epson V500 scanner?
    Will Photoshop Elements 13 work with the Epson V500 on Windows XP and Windows 8?

    Hi,
    I don't have a V500 but the data sheet for it says that it came with PSE 5 for Windows - unless they released a newer package.
    PSE 13 will NOT run on Windows XP - you need Windows 7 or 8.1
    PSE 13 doesn't support the Twain interface on 64bit systems and so is unlikely to support the V500.
    The last release that might work for you is PSE 12 but keep in mind that there will not be any more updates for that version.
    Your best bet is to download the trial version and test it on your system. If it works you might still be able to find PSE 12 for sale in some of the stores.
    Try: Download Photoshop Elements products | 13, 12, 11, 10
    Brian

  • Scanned Images Have Yellow Lines When Using the HP 2400 Scanner

    I have a HP 2400 scanner. The scanner was working fine on Wednesday, Sept. 10. I tried to scan a photo (Jpeg) and a document (PDF) but there were yellow lines going through each item. I reconnected the scanner and attempted to rescan the photo and document. The yellow line still appeared. Please let me know what I can do to correct the problem. 

    Hello there,
    To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - Scanners.
    Enjoy your day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How do I get Photoshop CS6 to recognize the Epson Perfection Scanner 4990 so I can scan and import

    Clicking File > Import does not show the scanner.  I have downloaded the latest drivers for the scanner.  The OS is Windows 7 64 bit.

    Download the TWAIN plug-in from Adobe Exchange.
    Mylenium

  • 648max USB2.0 trouble with Epson 2400 scanner

    It seems to be impossible to use an EPSON scanner Perfection 2400 Photo 2.0 with a system based on a 648max, the preview works but when you try to scan, you "loose" the signal. If you disabled the USB2.0 function in BIOS, all works OK.
    As OEM we can easily change components, so we tried with another 2 mainboards (648max and 648max-F) with the same results, the bios is update to 1.4 version.
    The operating system is WinXPHome so there is no driver update from SiS or Microsoft for USB2.0.
    The scanner with the same cables and drivers (original CD or update from Epson web) works correctly with a VIA-based (athlon) USB2.0 mainboard, so we can say that the scanner is fine.
    I'm sure there is a BIOS issue, because the 1.4 version talk about a USB ZIP trouble.
    Thanks for your urgent support.
    Pedro.

    Quote
    Originally posted by areachip
    It seems to be impossible to use an EPSON scanner Perfection 2400 Photo 2.0 with a system based on a 648max, the preview works but when you try to scan, you "loose" the signal. If you disabled the USB2.0 function in BIOS, all works OK.
    As OEM we can easily change components, so we tried with another 2 mainboards (648max and 648max-F) with the same results, the bios is update to 1.4 version.
    The operating system is WinXPHome so there is no driver update from SiS or Microsoft for USB2.0.
    Silly question, but is the version of XP Home that you  use on the 648Max upograded to SP1? I dont think XP had 2.0 functionality til then.
    Another thing you may want to try is to run the scanner through a powered hub, or even try a USB 2.0 add on card. If it works through a powered hub it may be a onboard power issue. If it works with an add-on USB 2.0 card then it may well be a BIOS or design issue.

  • Is the Epson scanner V600 compatible with Mac 10.8.5

    Is the Epson V600 scanner for photos a good choice and is it compatible with Mountain Lion os x 10.8.5?

    Contact Epson tech support and/or read about the printer system requirements on their website. 

  • Epson 3170 scanner problem

    Apple has effectively killed my Epson 3170 scanner. I have followed most of the post here trying to solve this problem. I have deleted Epson scan and downloaded the driver from Epson that is supposed to work with image capture, but it will not work. This is extremely frustrating when you had a perfectly good scanner and then you upgrade to 10.6 and download the apple drivers for Epson and then it no longer works. If anyone has an idea I would greatly appreciate hearing from you. I apologize if this is a repeat, but I have searched and cannot find a solution. HELP!

    I had the same problem but just found the solution in another thread.
    You will need to replace /Library/Image Capture/Devices/EPSON Scanner.app with an earlier version of the EPSON Scanner.app and then (for the time being) don't let Software Update install the Epson printer/scanner update. In my case, I didn't have the EPSON Scanner.app at all after installing Snow Leopard.
    There's some more info and a download link for a June 2009 version (v 5.0) of the (driver) app in this forum message: http://discussions.apple.com/thread.jspa?messageID=12031583&#12067887
    So far, so good: I can confirm that my 3170 is working with Image Capture again using the downloaded app.

  • Epson 4490 scanner not found by Acrobat X in Lion 10.7.4

    1. Uninstalled Epson software with software in "epson12887" uninstaller (from Epson).
    2. After connecting scanner, ran Apple Software Update and added the Epson Printer Software Update 2.11 from Apple.
    3. Epson 4490 Scanner is visible in System Preferences > Print & Scan window.
    4. Apple's Image Capture sees the Epson 4490 scanner, and Image Capture works with the scanner.
    5. Adobe Photoshop CS6 sees the scanner after adding Adobe's TWAIN plug-in, and Photoshop works with the scanner.
    In Acrobat, go to:
    FIle > Create > PDF from Scanner
    Scanner > Please select a device
    The Epson scanner isn't listed.

    I found the answer, thanks to this link:
    http://forums.adobe.com/thread/1054100
    The solution is to go to Epson's site, and download the software that's specific to OS X 10.6 (Snow Leopard) for my scanner. In my case, I installed both the ICA driver and the EpsonScan software specific for OS X 10.6 for the Epson Perfection 4490 Photo scanner.
    Unfortunately, Epson's Lion page:
    http://www.epson.com/cgi-bin/Store/support/supportLion.jsp
    points you to Apple's Software Update page for Epson drivers for Lion. While this is generally good advice (these were needed and appropriate for Image Capture and Photoshop CS6), the older 10.6 drivers and software from Epson are also required for Adobe Acrobat Pro X to "find" the scanner.

  • PS CS5 & Epson V500 Scanner, HELP!

    Is there a trick to get the Epson V500 Scanner to work with PS CS5? When I do a install of the Epson driver it does not come up in "Imports".

    Did you install the optional TWAIN plugin (needed to interface with TWAIN drivers)?
    Did you launch Photoshop in 32 bit mode (very few drivers are available for 64 bit)?
    And don't forget that we made TWAIN optional because so many scanner drivers cause crashes.

  • Problems Printing from Epson 2400 in Lightroom 2.3

    I'm in the process of switching over from a PC to a Mac. I've gotten lightroom running and transfered all my photos over. But I'm having two big problems printing from my Epson 2400.
    *8.5x11 prints are offset. The top of the picture starts about an inch lower than it should, and the bottom typically gets cut off.
    *Lightroom refuses to print 4x6 prints. It says it's printing, and the paper feeds in, but then the printer just spits out a blank page.
    I'm using the most current version of the Epson 2400 driver that I could find on the Epson web site.
    [Update] I used iPhoto 9 to print out some pictures, and they came out fine. So this seems to be a lightroom issue or a conflict between the lightroom/epson drivers.
    Any help would be greatly appreciated.
    Thanks!

    Further update. It appears that I can print perfectly from another account on the same mac. But the account on which my catalog resides doesn't work at all. Could my catalog have been corrupted when I transfered my photos and catalog over to the new mac from the pc? Is there any way that I can fix it? (I have tried optimize and relaunch; no luck.)
    I could -- as a last restort -- kill the catalog and reimport all my thousands of photos, but wouldn't I loose the keywords and adjustments?
    Any help would be greatly appreciated!

  • Suggestions for calibration device for imac 24 monitor and epson 2400 print

    I'm in search of a quality calibration device that would calibrate my monitor and the epson 2400. When i print, the colors seem to be darker than what i'm seeing on the screen.

    Owen
    Have a look at this short article Great Prints from your Mac by Derrick Story
    http://www.oreillynet.com/mac/blog/2006/04/greatprints_from_yourmac.html
    Also this thread from the Didital Darkroom Forum
    http://photo.net/bboard/q-and-a-fetch-msg?msg_id=00KcjG
    Dennis
    17" iMac Intel Core Duo 1.5GB Ram   Mac OS X (10.4.9)   Maxtor 300GB FireWire Creative Inspire 2.1 2G Nano

  • IBook won't recognize Epson 1660 scanner software

    I can't get my iBook to recognize the scanner software to the Epson 1660 scanner. I saw this topic posted in February but no replies. Has anyone figured out why this problem exists? The driver is for OS 10.3x which is what I'm running on this iBook G4. Thanks, Cari Ferraro

    make sure its plugged into the usb port and not into the airport express port.
    had same problem with a brother printer. Only recognizes scanner software/printer utilities etc when the printer is plugged directly into the computer via usb.
    can still print to printer when plugged into airport extreme via wireless but no access to scanner functions, fax, printer utilities etc.
    Ibook 12" G4 1.2 Ghz   Mac OS X (10.3.9)  

  • Kodak Professional paper color profiles for Epson Stylus Photo R2880

    Is there a color profile for the Epson Stylus Photo R2880 for Kodak Professional paper (lustre)?

    A member of the Brand Management Group responsed. There is no color profile for my printer at this time. However, I was given a profile to try and it worked very well.
    Thank you Brand Management Group.
    Henry

  • Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

    Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

    That is priceless!!!  Thanks!  I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement.  Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
     My error msg is a little different from those previously stated, but close:  0xc18a0201.  Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100.  I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
    Oh heavens, I've had the c6280 a whopping 2 1/2 years!   I'm sure they want us poor slobs to have to buy a new one every year & a day!  To say nothing of the exorbitant prices for ink.  And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!!   Yeah, & what's with that not being able to print in BLACK if a color runs out????
    Anyway I really loved your essay!   It's a classic!  And says it all!  I hate that we have to be 'slaves' to the electronic 'wonders'!!!

Maybe you are looking for

  • How can I get another Installation Disc (DVD) for my CS5 Application

    I lost one of my DVD installation discs from my CS5 set.  I called Adobe and they said it was an older version and they don't have a link for me.  Does anyone know how I can get ahold of the CS5 Application disc???

  • CS-4 Camera Raw for Nikon D7000

    Using the Help -> Update my CS-4 saya there are no updates available at this time.  However, Photoshop and Bridge cannot show images for the Nikon D7000 or the Nikon D3100.  The latest Camera Raw update (for CS-5) will not install in CS-4.  Short of

  • New Quicktime doesnt play my AVI movies

    My .avi files worked on my old laptop, then I trade in for a new one, try to play my movies, and it doesnt work. Does anyone know any easy way to fix this. I have installed every plug-in i can find, and nothing. The files are fine, I can open them in

  • "An error occurred uploading your Order"

    I've now seen this message 20 times. I've deleted plist. I paid 14 bucks to upgrade iPhoto iLife 11 (and didn't have to). I've rebuilt library, thumbnails. I've had the cable company check my connection speed. I have successfully ordered prints, book

  • How to make form buttons do what they say?

    I created a test form on a sqlquery and the HTMLDB created the items and buttons correctly. Afterwards I created a process on load before heade to retrieve a row from the DB if some items are populated. What I wanted to know is: 1-How do I make the b