KOMK Field is not showing up in the field catalog for creating cond. tab

Hi Guys,
I add a new field in KOMK table.
Its showing up in the Field catalog but when I create a condition table, its not showing up in that catalog to choose.
Thank U for Ur time.
Cheers
S Kumar

Hi,
Perhaps you have checked it. Do you check if in SM30 for view VV_T681F_VA you have this field?
Regards,
Eduardo

Similar Messages

Manual created PO not showing up in the shopping cart for non-catalog scena

In non-catalog scenario within SRM, the shopping cart shows the purchase requisition and not the manual created PO after
running the program BBP_GET_STATUS_2. Do I need to run the program CLEAN_REQREQ_UP to retrieve the manual created PO on ECC 6.0 after BBP_GET_STATUS_2? What is the selection criteria for both of these programs?
Thanks
Chris Htizke

Hi,
I'm not clear you issue. Is it SC -> PR(backend) -> PO(backend) classic scenario ? or You just created a PO in backend system?
BBP_GET_STATUS_2 will update SC follow-on doc information from backend.
Regards,
Masa

Upgraded to Lion and now Mail does not show attachments in the Send Box (for new messages only).

After upgrading to Lion and switching Mail to the classic mode, I can no longer see if messages have attachment in my Send Box. However, I can go into the message and see the attachment.
Strangely, all my messages prior to the upgrade show their attachments.
I've looked through the preferences and don't see a swith for this.
Any suggestions. Thanks.
Blair

Walter, thank you for the suggestion.
Perhaps I am not explainging myself very well.
In the Send Box new messages do not show the clip in the Attachments column. The image below is of two messaegs, both of which have an attachment, yet no clip is shown (this is also true of the Draft Box).
In all other boxes, an attachment is shown with a clip (see below).
I need the clips to be shown in all mail boxes.
Thanks.
Cheers, Blair

Songs that I have purchased are missing in iTunes (file not found/exclmation point), and do not show up in the iTunes Store for download.

I have a laptop that has (or had) pretty much all of my music, both burned from CDs and downloaded from iTunes. My 17 year old son on occasion syncs his iPhone and iPad with this laptop. As of the last sync (as best I can determine), many songs that I purchased in the past few years are now missing, in that they have an exclamation point to the left of the song title, and when I try to play the song, I get an error message that says "The song could not be used because the original file could not be found" or something to that effect. As it turns out, the file seems to be erased. This has happened multiple times, and I could be wrong, but I believe that there are some songs that had the exclmation point last time he synced that now don't, and vice-versa. There is not an obvious correlation or grouping as to why these songs are missing (e.g,. they were not all purchased on the same date, not all songs from one artist are missing, etc.).
Since most of these songs have been purchased through iTunes through my account, my reaction was to go to the iTunes store, log in with my account, and re-download them. Problem is, all of these songs instead ask me to purchase the song, instead of displaying a "cloud" logo. Therefore, it appears that I have to re-purchase these songs, which does not sound correct.
Questions: Does anyone know, most importantly (to get an immediate fix):
1. How can I re-download these songs and why doesn't iTunes Store recognize that I have already purchased them?
and perhaps as important (more of a long-term question):
2. Why does this happen and how can I prevent this from happening again (since it has happened multiple times)?
Thanks.

1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2

Guys, the playlists I created on iTunes do not show up in the Sync options for the iPod. I don't understand why not.

It only shows me the Generic Playlists but not mine.
Please help, Thank you.

I'm not sure what you mean when you say that the wireless devices are not visible in AirPort Utility.
Open AirPort Utility - Click Manual Setup
Click on Wireless Clients (3rd line from the bottom) and a window will open to display the AirPort ID of each connected device.
I'm also not sure what you mean by "manage". Once a wireless device is connected to the network, you cannot "disconnect" it from the network using AirPort Utility. AirPort Utility only monitors the connection.
Using the Timed Access feature in AirPort Utility, it is possible to assign daily time limits for each device that is allowed to connect to the wireless network.
So, for example, one iPod would be allowed daily access from 8AM to 11 PM. The iPod would not be allowed to connect between 11:01 PM and 7:59 AM in this example.
You can set up different time limits for each device that you want to allow to connect to the wireless network in similar fashion.

BB 9000 will not show outlook in the check list for attempting first synch.

Could this be because I am running oulook '97 ?
thanks for you comments, Andrew

Hi and Welcome to the Forums!
Quite possibly...see this KB for compatibility between PIM and DTM versions:
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

When I create a playlist and sync it to my iPhone not all of the playlist transfers over. All of the songs are there and are playable they just do not show up on the playlist.

When I create a playlist and sync it to my iPhone not all of the songs on the playlist transfer over. All of the songs are there and are playable they just do not show up on the playlist. For example, in itunes on my computer a playlist has over 100 songs, but when I sync my phone, my iphone only shows 60 songs. I can go into my phone and add the missing songs to the playlist, but the next time I sync my phone the songs are gone again.

Wondering if you haven't been bitten by the new "feature" of iOS 5, as was my son. turingtest2 explained it very well in reply to my own query about "missing" songs in playlists.
Here's that thread...
https://discussions.apple.com/message/16903613#16903613

Added fields does not show up in the RSA6

Hello.
Problem 1:
I am enhancing 0bbp_td_sc_1. I added a field to the structure, but it does not show up in the rsa6. ( I double clicked on the extractor name). If I go to the extractor structure (BBP_SC_BW_GET_TD_STRUC), I am able to see the append. The structure is activated. The append structure is also activated (Zabbp_sc_bw_get_td_struc).
What can be wrong? I did not see the added the field in the ROOSFIELD table either.
Problem 2: What is the difference If I populated the field value from RSU5_SAP_BADI to the rsap001 user exit EXIT_SAPLRSAP_001?
I am not able to run debug RSU5_SAP_BADI. STOP does not stop. While I debug, I am able to see the field ( The field I added from problem 1). But the value never populated.
I am able to run the debug for EXIT_SAPLRSAP_001. I see the data populated for the field. But in RSA3 result, I am not able to see it.
Thanks in advance.

Hi
1. this is usualy the case if the append struct is not active or you did not add the new fields in the append struct.
I would suggest to remove the fields save activate and re do the process making sure you either use an existing append struct or create a new one.
2. BADI are different then UE in the way they are implemented. I will recommend using UE.
You will not see the enhanced fields in the out put of RSA3 so I stop on the last line and check the values in the struct.
to debug I would either go to the UE (in a different session) and put a break point there and run RSA3 or check the debug in RSA3 and then find the SAPEXIT that calls the UE.
I hope this helps.
Reg's
Edan

BBP_INB_DELIVERY_CREATE-material number is not showing up in the VL33N

Hi All,
I am trying to create inbound delivery with reference to Purchase Order.
While using BBP_INB_DELIVERY_CREATE to create inbound deliveries, the material number is not showing up in the VL33N screen but Material Description is coming.
As you have also faced same problem,can you please suggest how to resolve this issue?Your help will be highly appreciated.
Thanks
Priyanka

Hi,
This function module doesn't pass Material number while creating the inbound delivery. Instead you can use the function module GN_DELIVERY_CREATE along with NUMBER_GET_NEXT function module.
See line number 631 to 656 of include LBBP_SIC_40F02 (Called from Line no 18 of BBP_INB_DELIVERY_CREATE) for more details.
While using the function module BBP_INB_DELIVERY_CREATE, material number is not passed to the function module (GN_DELIVERY_CREATE) structure field XKOMDLGN-MATNR.
Regards
Vinod

My downloaded text sounds do not show up under the sounds tab in settings after installing 8.1.1. can someone help me please?

i downloaded a couple text tones and since installing 8.1.1, they will not show up under the sounds tab. in fact, they do not show up in my recent purchases on itunes, but when i go to buy them again, it says that i have already bought this tone. I just want to use the tones i paid for as the tones on my phone. not asking much.... thanks for the help. i hope someone can help me get the tones working. thank you.

This was happening to me too but only for some of my songs. I have a mac so I dunno about PCs, but for most of my ringtones I had to create an ACC version in itunes to make them short enough then turn that into a m4r and those all worked fine. But if the song was already short enough and I didn't create an ACC version and just turned the original into a m4r, then it wouldn't appear in my itunes.
so if you're on a mac:
1. go to get info, options, pick when you want the song to start and end.
     Has to be pretty short to work, 30 second or less is good
     if it's already short enough that's fine
2. right click and click 'create ACC version'
     a copy with the length you put in will appear, drag that into a folder or whatever and just type in m4r where m4a would be
     still make an ACC version even if it's the right length
Hopefully this helps someone else.

CD's not purchased from iTunes but uploaded to iTunes do not show up in the music folder on Apple TV! How can I fix this?

CD's purchased from iTunes but uploaded to iTunes do not show up in the music folder on my Apple TV! How do I fix this?

You would need to make sure you're accessing the Computers icon. If you are under the Music icon, that will be accessing the cloud and only show iTunes purchases (unless you subscribe to iTunes Match)

My ipod touch is not showing up on the source list

My iPod Touch is not showing up on the source list. I have tried to restore the ipod, i have uninstalled, reinstalled, and used the repair option in the control panel to no avail. I am currently useing the latest version of Windows 8 on an Asus VivoBook. What can i do to fix the problem?

Hello dbar2530,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Best of luck,
Mario

I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

I purchased 2 books for my iPad and they downloaded successfully. They show up in iTunes when my iPad is connected to my Mac but do not show up on the Mac. Is this a synch issue? When I click the Synch box I am warned that downloads on my iPad will be

i purchased 2 books for my iPad and they downloaded successfully. They show up in iTunes when my iPad is connected to my Mac but do not show up on the Mac. Is this a synch issue? When I click the Synch box I am warned that downloads on my iPad will be erased. Is that true? My ultimate goad is to be able to read the books on my iPhone as well. Thanks.

You should be able to copy them to your computer's iTunes via File > Transfer Purchases and you can then sync them to the iPhone (or you could re-download them directly on the iPhone)

I have 100's of CDs that I have downloaded to my itunes library and they are in the library playable but they do not show up in the C drive under the iTunes Music folder under users. Why are they in the libary and not in the itunes music folder. Win 7 OS

I have 100's of CDs that I have downloaded to my itunes library and they are in the library playable but they do not show up in the C drive under the iTunes Music folder under users. Why are they in the libary and not in the itunes music folder. Win 7 OS. When I look in the library under the get info screen it says they are in the folder itunes music, under the c: drive but when I actually go to that folder to look for them they are not there....HELP!

Hello RumDog,
I think this article will help you find the media in your library.
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Discovering and changing the iTunes Media folder location
Note: You would usually only change the iTunes Media folder location to share music between accounts on the same computer. See this article for specific steps on how to accomplish this. Also, see this article if you want to know how to move your music to a new computer.
Mac OS X: Click the iTunes menu and choose Preferences.
Windows: Click the Edit menu and choose Preferences.
Click the Advanced pane. iTunes displays the location of your iTunes Media folder.
You can then:
Note where your media folder is, such as for backing up your media.
Use the Reset button to reset it's location to the default (which is the iTunes folder).
Click the Change button to select a folder for a new location. Once you change this location:
If you make a new or alternate iTunes library, the new location will be used by that library.
Existing files will not be moved unless you choose File > Library > Organize library and choose the option to "Consolidate files."
From: Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Cheers,
Sterling

KOMK Field is not showing up in the field catalog for creating cond. tab

Similar Messages

Maybe you are looking for