Kona/Blackmagic HD audio capture
Okay, I feel stupid for having to ask this, and I'm fairly confident I could figure it out if I had a card in hand, but:
What is the workflow to get audio from a camera (specifically a Canon XLH1) through a Kona or Blackmagic card while capturing to DVCPRO HD?
I've been considering purchasing a card for a while now, but I'm completely lost as to how this actually works. I'm the kind of guy who learns by doing, so what I've seen on-line hasn't helped. What have you guys done?
I'm leaning toward a Kona 2 for my "old" G5.
Thoughts?
Thanks so much!
~Luke
Well with a Kona LH series card, you'd take the analog component outputs and analog audio outs to the input of the card, and then select DVCPROHD as the capture preset. AJA doesn't make Kona 2's anymore...
If you were to buy one though, you'd need an analog to SDI converter to capture the video with, and an analog to digital audio converter to convert the audio to digital... the LH card would have these inputs without any other converters.
Jerry
Similar Messages
-
FCP, Beta SP and Blackmagic Multibridge Extreme capture card
I'm having problems getting a video signal into FCP via a Multibridge Exteme capture card by Blackmagic Design. I currently have device control and am able to view footage already in FCP on an NTSC monitor so it appears as though the capture card is working. I have my capture setting set to blackmagic NTSC-10 bit (i've tried several different settings). I have the deck connected to the card through the component ports. Here are the specs on what i'm working with:
Mac Pro dual 3.0GHz Xeon
10 GBs of RAM
Blackmagic Multibridge Extreme capture card w/ breakout box
Sony PVW-2650 Beta SP player
FCP 5.1.4
Quicktime 7.1.6
OSX 10.4.10Under System Preferences go to the Decklink Preferences.
Change the input from SDI to Component and XLR audio
Problem solved.
Phil -
Multitrack Audio Capture question ...Not DV related :)
I am wanting to use FCP 5 to capture multitrack audio from a firewire interface such as the MOTU 828mkII while capturing video from my Kona LS at the same time.
the FCP 5 page says, "Multichannel audio lets you capture and output up to 24 channels of high-resolution 24-bit, 96kHz audio in a single pass."
I'm not sure if that means that you can capture up to 24 channels while you are capturing video or if the multitrack audio capture requires timecode syncing and capturing audio and video separately. The reason I'm trying to do this is that I want to capture the video and multi track audio live rather than recording to a deck with timecode and syncing it up later. I know this isn't the typical way to do it and that FCP capture is a less reliable way to record than a VTR. I'm aware of my Kona card's multiple audio channels, but I am specifically interested in a multi track audio interface (such as MOTU 828mkII).
I've searched the forums and internet for weeks and I can't find anyone who has suggested that this work. Will a 828mkII just show up as another audio capture device in FCP that will record more than 2 channels during video/audio capture?
Thanks!Hi gevus, I know this is somewhat late and if you haven't already found another solution then I would suggest that you purchase a pci sound card e.g. Soundblaster Live can be had for as little as $35.00 from Newegg.com (a very reliable online store with free shipping most of the time). I capture video with my 9600 aiw pro and use a sb live...my mb also came with an onboard sound processor (nforce2) however, I still prefere the flexability of the Live card...plus dispite reviews on this nforce2 onboard sound as being as good as Live I disagree I listen to (and watch) alot of movies on my computer and have a pair of BOSE headphones. I cound definetely notice a difference in sound quality. I dont know your video needs but the Audigy card by Creative Labs is even better if you need or want real good quality reproduction however, remember that the audio sorce is the real key to good sound.
Bret -
I've reviewed many posts here about audio capture but, I am unable to figure out what the "trick" is to capturing audio alone with the video using the new iMovie. I'm connected via Firewire and I'm able to view the video in capture mode but, I hear no sound. I've checked iMovie Preferences and System Preferences and everything seems to be OK there.
Is this the way this new version of this program functions? I wish I didn't have to post a msg here because, I'm trying to read the previous post and trying anything that seems to pertain to my issue without the desired results.
Can someone please shed some light on what's going on with this function of this program?I assume you are wanting to hear the audio as you are importing and not that you have no audio once it is imported.
imovie 08 doesn't play audio while importing. While you are using tape (that imports in real time) imovie now imports from a variety of different types of camera such as AVCHD (which isn't imported at real time. Therefore it is no longer logical to playback audio on import. -
In FCE, trying to capture VHS via DV converter box. The sound is not coming over. In system settings/scratch disk (internal hard drive) the audio capture is grayed out. Analog RCA composite video & stereo audio connectors in place. How do I get my sound?
You can't get audio during capture as firewire has control.
Use the audio from the play device if you need to hear what's happening. You will notice latency on the FCE capture window, that's normal as well.
Al -
Media Encoder not finding "audio capture device"
Hi,
Im using Adobe Flash Media Encoder with Dxtory for Twitch streaming, and at first it worked fine. Recorded both my mic and game audio perfectly. Then seemingly suddenly, I fired it up and it wouldn't stream the game audio. It would my Mic, but thats it. I then unplugged the mic and it started saying I had no Audio Capture Device. I checked in Dxtory and its set up the same as it was when it was working. It picks up both the mic and speakers like it should. I have uninstalled this program multiple times, both 3.1 and 3.2 versions, and each time when I re-download it, it loads up the same profile I had before. So when I am uninstalling it, its not uninstalling everything for some reason. Even though the program is no where to be found after its uninstalled. I have downloaded xsplit, and it picks up the game audio and my mic. So its just this program. Anyone have any ideas? I cant seem to find anything online about this issue.
Thanks!From where? PP sequence? PP bin? PP Source Monitor? Watch folder?
-
When Capturing from a DV device on to final cut express HD, only audio is "caught". When I checked the scratch bin the audio selection was disabled (like, the check-bow was dimmed and unable to be changed). I'd like to be able to capture audio without using the voiceover feature and having to completely match audio with video. Ya dig?
Thank you (for at least reading this)!then why is FCE capturing video but not audio. all the settings are correct, the only thing i fan find wrong is the "audio capture" check box in sratch disk settings under system settings is nulled to where you can't do anything to it. So, unless it's normally like that, I'd say it has something to do with the way it captures audio.
so, please tell me that has nothing to do with it so I can find another reason why it won't capture audio.
Macbook Pro Mac OS X (10.4.8) -
I want to whether the cross-platform supports the audio capture?
If not ,are there any methods to finish audio capture on handheldHey DaddyPaycheck, the tape deck is actually one of those boombox/shelf stereo with cd carousel, and dual tape deck (5.1 speaker system). Audio was working just before I disconnected the speakers. I tried using the speaker output jacks, as well as another audio out, but neither one of them was putting out audio through my computer's speakers. The sound preference recognizes the iMic, but not the Pyro. But the apps I mentioned recognizes both. Selecting the iMic for output in the system preference doesn't work either. I see the bars moving, but I believe that's just random noise the iMic is picking up.
So, by all intent and purpose, the set up I have should technically work? -
Audio Capture only happens if its more than 5 seconds
Hello,
I'm writing a midlet that does audio capture on the LG CU500 phone. When I capture for 5 seconds or more, audio capture works as intended, however if I only record for under 5 seconds, it doesn't work. There is no timer. Would could be causing the problem?
Thanks
aztec30Here is a snippet of the code that i'm using. When playing back, if I record say 10 seconds, I only hear about 7 seconds of the recording. About 3 seconds are cut off at the end. If I record for say less than 4 seconds, nothing seems to be recorded, nothing plays back.
To record I do the following
try {
if(player != null)
player.stop();
if(ctrl != null)
ctrl.commit();
player.deallocate();
player.close();
ThreadSleep(500);
if (player==null) {
player = Manager.createPlayer("capture://audio?encoding=audio/amr");
player.realize();
player.prefetch();
player.addPlayerListener(playerListener);
is = new ByteArrayOutputStream();
ctrl = (RecordControl)player.getControl("RecordControl");
ctrl.setRecordStream(is);
ctrl.startRecord();
player.start();
} catch (Throwable e) {
Once recording is stopped I do this
try {
player.stop();
ctrl.commit();
player.deallocate();
player.close();
Thread.sleep(500);
if (is !=null) {
playback= Manager.createPlayer(new ByteArrayInputStream(is.toByteArray()),
"audio/amr");
playback.addPlayerListener(playerListener);
playback.start();
} catch (Throwable e) { -
Audio capture lost after installing snow leopard
Has anyone else had problems loosing their audio capture in Premiere cs4 after installing Snow Leopard?
Just wondering, is that a plug-in for Premiere?
Similar problem with After Effects maybe?...
http://blogs.adobe.com/keyframes/2009/08/after_effects_and_snow_leopard.html -
Audio capture support won"t install in CD spin doctoris there something I need to know?
How do I install audio capture support? I/m getting an error message: The Installation Failed. Does anyone know of a solutioon?
AFAIK, CD Spin Doctor requires Toast Titanium 9. The latest CE Spin Doctor that works with it is 5.0.4. Once you launch it, the first window that pops up is this.
-
Audio capture recording .mov - .m4a
I accidentally saved an audio capture recording with QT without switching it to save as audio. It's now a .mov (saved as movie) instead of .m4a. How do I convert from the .mov to .m4a? Also, is there any way to make it save as audio (.m4a) by default?
Ah, yes, that works! Thank you.
A follow-up question: When audio capture is stopped, how can the client program find out when all the audio data has been written to a file on the server. The client needs to know this to perform subsequent operations on the audio file. -
Audio capture scratch for iTunes import/48kHz convert
Working in first FCE HD project. I want to import an additional music track from iTunes. Following the manual's instructions for converting iTunes files to 48 kHz for import, it says to "navigate to the project's audio media folder". In the external hard drive's doc folder it shows all the necessary folders there except Audio Capture Scratch ( which was default checked and unselectable in Settings prior to the initial video/audio capture of existing commercials, etc. from a deck).
Apparently setting up this Audio Capture Scratch as a destination that shows in the FCE docs window must be done after the initial set-up. (?) If so, I can't find how to do it. According to what I've been reading, though, the Audio Capture Scratch should already be among the 7 folders (Capture scratch, Render files, Audio render files, etc.) but it's the only one missing. Is this even related? Can audio be imported directly to the project as opposed to the ext. drive?
Question is... Should that in fact be the destination folder? Or do I need to create an "audio media folder" for this project? If so, how? I've not found anything in FCE Help or the Brenneis manual.
Thanks for any help on what must be a basic conceptual hole in my limited mental model.You can import audio files into FCE from any location
on any HD. The audio file itself could be in your
iTunes music folder but if so, I suggest making a
duplicate copy of the song file in some other folder
(your choice, your location, your folder name) to
minimize the risk of accidently messing up something
in your iTunes music folder.
You could even drag a copy of the file from the
Finder into the FCE Browser. Once it's in the FCE
Browser, you can drag the music file onto one of your
audio tracks.
The ideal format is AIFF, 16-bit, stereo, 48Khz.
Truly thanks for that. But... In order to convert the iTunes file to the above, I have to go to the iTunes Pref. window and the folder location field, click the Change button and navigate to the "project's audio media folder"... But I don't have, can't find or don't know how to make that folder. So I can't specify the destination. I'd love to drag/drop, but the format won't be AIFF, 16 bit 48kHz.
When I read the manuals instruction for importing directly from a CD, it also says to drag the files into my "project's audio media folder", so I'm back to the same problem. I guess I could try dragging from the CD directly to my browser, and I will, but even if that works for now, I need to understand what/where/how to create the audio media folder, as I fear I'm missing a basic understanding here.
And why is there no Audio Capture Scratch folder showing in the FCE doc folder? Even if this unrelated and irrelevant, I'm still puzzled about that. I'd appreciate any clues here. Thanks again. -
"Audio Capture Device not selected" message? Help please!
Howdy folks,
I just got a new PC, Windows 7 OS, I've installed ManyCam and version 3.2 of FME and am looking to broadcast again. I don't recall this issue with my old PC (XP OS, Broadcaster StudioPro virtual cam and FME 2.5). I updated to 3.2 as suggested/recommended in previous posts, but I am getting a message telling me to "please select audio capture devise connected to your system." What am I doing wrong or might there be something that I need to download that I missed?
Any help you can give is greatly appreciated. I truly loved using FME 2.5 but am doing like you suggest here.
Peace,Hello -
My problem was fixed by setting a recording devise in my "sound" menu.
What I did was -
1. Open the sound menu from the control panel.
2. clicked on the recording tab.
3. Chose "Stereo Mix - Realtek High Definition Audio" as my default device.
That solved it. It was almost too simple. Hope this helps you! -
Audio Capture not available / grayed out
I have a Samsung SC-D263 connected and when I try to capture video in FCE there is no audio. When looking in the settings, the check box for audio capture is grayed out... any ideas?
I managed to find drivers for the camera, but i don't know how to install them...What audio checkbox are you talking about?
Do you see the video in the capture window? Do the meters move?
http://www.fcpbook.com/Audio3.html
Maybe you are looking for
-
Sound randomly comes out speakers when using earphones and wierd ZZZZZT sound
For some wierd reasonm, sound sometimes comes out my speakers when I have my earphones in for like a split second. Also sometimes this wierd ZZZZZT sound comes out when listening to music and scares the living crap outa me.Help please?
-
How to Identify the count , If multiple parameters are passed using Pipe Delimited string
Hi, We are passing Pipe delimited string to the parameter and I want to know how many values we are passing to the parameter. Here is the example Parameter.Grant: 24|34|54|67 I am using below expression, but it is not giving the right values. Please
-
How do I get the sound back from my computer?
I have a MacBook Pro late 2008 and running Lion. I have lost sound in my computer. I can jiggle the laptop and get it to work but then it quits. Any ideas what a new sound system costs? Is there an alternative option? Thanks.
-
InDesign SDK and VC++ 2005
Hi, I'm trying to write a plugin for indesing using vc++ express edition. I have been able to create the basic dialog plugin, however when i try to add a drop down menu to it and compile i get these error messages. Performing Custom Build Step c:\Pro
-
Xp wont boot after bios update with dualcore amd 4200+ (k8n-neo2 platinum)
after flashing the bios (xp already installed on a sata stripe array) xp wouldn't boot anymore ... ik had to flash the bios to be able to use my amd x2 4200+ ... so I tried to instal xp freshly on the sata raid ... hangs when it restarts to instal de