Konica Minolta Magicolor 2530DL Laser no longer working with 10.4.10

Hey all. I have a Minolta 2530DL laser printer that I previously had up and running via my network, using 10.4.9 and it worked fine. But ever since I updated to 10.4.10, the printer is no longer seen by my Mac. I installed the driver found here:
http://printer.konicaminolta.com/support/currentprinters/mc2530dlsup.htm#osx
And nothing I've read indicates that it shouldn't work. I've uninstalled the driver, reinstalled it, tried my USB cable, ethernet, etc. Nothing works. I even went so far as to return the printer for another, and the new one does the exact same thing! So, it has to be my OS.
The printer isn't seen in System Profile under any configuration. The printer starts up just fine, but never goes online and into Ready status. As I said, It worked perfectly before.
I'm at a loss as to what to do, so any advice would be appreciated!
Thanks,
Jason

Called Minolta and the tech was really quick to blame "bad power" for zapping the brains of the printer. He said that they would send me another one, and to ship the old one back. So, in taking the printer apart, I removed the extra mem that I added to it (256MB PC133), and thought "hmmm.. I'm going to try this without the memory stick to see if it works", and it DID! So, the problem was bad memory!!! At one point, this memory worked just fine with the printer, but musta just went bad. So, i'm going to order a fresh new stick and be done with it.
Too bad that I wasted at least six hours of my life troubleshooting this thing! Thank goodness I didn't reinstall my OS, which was going to be the next step!
Thanks for your help Jason, you're a real life saver!
Love,
Jason

Similar Messages

  • Has anyone successfully printed on Konica Minolta Magicolor 2530DL on Mac OS X 10.9

    Has anyone successfully printed on the Konica Minolta Magicolor 2530DL after upgrading to Mac OS X 10.9?
    Also has anyone successfully printed on the Epson EPL-5700i after upgrading to Mac OS X 10.9?

    I realize that most people tend to visit the forums to report problems rather than visit the forums to report successes after an upgrade. And I appreciate John Blanchard1's taking the time to reply to my posting.
    Dakoda mentions problems printing to a Konica Minolta C280 and the thread that John Blanchard1 posted refers to problems printing to both Konica Minolta BizHubs (C652 & 501).
    However, the existence of these problems with other KM printer models does not let me know if anyone has been successful printing to the Konica Minolta Magicolor 2530DL after upgrading to Mac OS X 10.9 or even if anyone has had a problem with printing to the 2530DL after upgrading to 10.9.
    On October 28, 2013, a Konica Minolta technical support agent told me -- after checking with his supervisor -- that regarding the Konica Minolta Magicolor 2530DL that they will not be upgrading the 2530DL printer driver. In fact they have not upgraded the driver since 10.6. I learned on their support site that the 10.6 driver has continued to work with 10.7 and 10.8. They have not yet updated their support site for compatibility of their line of printers with 10.9.
    So I would like to find evidence that this printer has continued to work for someone after the upgrade to 10.9 rather than upgrade and then have to downgrade to still be able to use this printer.

  • HT3669 Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. Can someone please advise me how I get the printer to work with my i-Mac? I have installed it but documents don't print. Thanks

    Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
    I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
    Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
    Thanks, John Lee

    Looking at the Konica web site for the PagePro 1300W, I saw the following note.
    Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
    So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page.

  • How do I get a driver for KONICA MINOLTA C250 UV2.0.0 that worka with os 10.6.

    Where do I find a driver for KONICA MINOLTA C250 UV2.0.0 that works with os 10.6.7 on my MBP

    I googled, "C250" and come up with this web site:
    http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=831&fil etypeid=0
    scroll 3/4 down the page. It's there. You can google too.

  • Konica Minolta magicolor 7450 Unable to print to Custom paper sizes

    Hi
    I have a Konica Minolta magicolor 7450 laser printer that (since switching to mac from windows) is unable to print to Custom paper sizes (entered in the print dialog box from within photoshop CS3) and nothing will print from illustrator CS3 at all.
    I have OS 10.5.2 with the 10.1 photoshop update, and the 13.0.2 illustrator update.
    When I use to use windows xp & photoshop CS2 I didn't seem to have trouble with this function, but since jumping over to mac & CS3, I can't print on any paperstock other than the defult sizes listed (which it dose perfectly) - I've re downloaded & installed the printers driver, downloaded & installed a firmware update for the printer and tried printing with a network cable & usb cable - all with no luck. I've also tried entering in the custom paper size in the printers LCD panel & setting in as default but it still wants to print on A4 or A3 paper...
    Any ideas out there would be appreciated!

    so I've been pulling my hair out for 2 days & nights now trying to figure out why I couldnt print on custom paper sizes - I've just now hit the "help" icon in the print dialog box and found this:
    "Creating a custom page size
    If you want to print on unusual size paper, such as an odd-size envelope or card, you may be able choose the paper’s size from the Paper Size pop-up menu. To find the Paper Size pop-up menu, choose File > Page Setup, if available. Otherwise, choose File > Print.
    If you can’t find the size you need, you can create your own custom paper size.
    To create a custom page size:
    Open the document you want to print.
    Choose File > Page Setup, if it’s available. Choose Page Attributes from the Settings pop-up menu, and then choose Any Printer from the Format For pop-up menu.
    Choosing Any Printer ensures that your document can print on any printer that supports the paper size you select.
    If Page Setup is not available, choose File > Print.
    If the Print dialog contains only two pop-up menus and some buttons across the bottom, click the disclosure triangle beside the Printer pop-up menu.
    Choose Manage Custom Sizes from the Paper Size pop-up menu.
    Click the Add button.
    Type a name for the paper size.
    Enter values in the Paper Size and Printer Margins field."
    All I had to change was the "any printer" setting from my (konica minolta) printers name to "Any Printer"!! now my custom paper sizes are printing fine and dandy!! phew!!!!!!!!

  • Konica Minolta Magicolor

    I did not see these on the list: Does anyone know whether the Konica Minolta Magicolor 2430DL printer is compatible with Airport Express? Same question for the Konica Minolta Magicolor 2550 DN. Thanks.

    wambo0402 wrote:
    the installation went fine but in the Systemproperties I only see the printing function for the device. The second button for scanning isn't there.
    You will only get the Scan button if KM supplied an ICA driver. If their driver is TWAIN-based, then you will need to use an application like Adobe Acrobat Standard or Pro to scan with. Or KM may have their own scanning application.
    If the scanner driver is ICA based, then try opening Image Capture. If the KM is networked, it will appear under the heading of Shared and selecting it will either work or you will get an error about the lack of driver, thus confirming that the scanner driver is not ICA-based.

  • I am trying to connect my macbook pro to a konica minolta magicolor 1690MF

    I am trying to connect my macbook pro to a konica minolta magicolor 1690MF printer/scanner.  I tried to download drive software from the konica website, but I still can't add the printer to my system.

    Depends on your model TV.   Read your TV user manual.  The newer models have "how to hookup" instructions for computer & games.
    You can also do a forum search as well as a Google search.

  • Can't install scanner driver for Konica Minolta magicolor 1690mf

    I've successfully installed the printer driver for my Konica Minolta 1690MF multi-function printer/scanner/fax.
    However, when I go to try an install the scanner driver, the following error appears:
    "mc1690MF Scanner can’t be installed on this computer.
    The operation system is not adequate for running magicolor 1690MF."
    I am running 10.6.1.
    I downloaded the drivers from the konica minolta website, and it claims the drivers are compliant up to 10.5 (http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=1167 )
    Is there any way to get a scanner driver that is compliant for the snow leopard OS? Is there an alternative to waiting for the manufacturer to update their drivers?

    I am having the same problem. I was able to scan last week and suddenly this week image capture cannot find the scanner. The Konica Minolta Magicolor 1690mf prints fine but scanning is not functioning. I looking at drivesr on Konica Minolta's site but there were none for os 10.6.1. I called them in and they could not suggest anything other than reloading the printer. They could not tell me if this was a known problem. The person I spoke with says that with apple making the updates it might be a couple of months before they have a driver for it..... how frustrating I can't use the scanner for a couple of months??? Any suggestions out there?

  • Konica Minolta Magicolor 2300DL Drivers

    I hope to someday to buy a Mac Mini and would like to know if there are drivers for the Konica Minolta Magicolor 2300DL.
    I was at a Mac Store today and asked one of the employees if there are drivers for the Magicolor 2300DL on a Mac Mini and he went to Konica Minolta's Webpage and did a search for Magicolor 2300DL Mac Drivers and there the drivers were for Windows Mac and even Linux.
    When I got home I went to http://kmbs.konicaminolta.us/ and could not find any Mac Drivers, all they had were Vista and below, not even Windows 7 drivers.
    Where can I get MAC drivers for the Magicolor 2300DL for what ever the latests version of Mac OS is?
    Thanks.

    Try this > http://printer.konicaminolta.net/drivers/mac/2430dlppc.dmg
    Configure the protocol as HP Jetdirect.

  • Function keys no longer working with a new keyboard...

    I got a new keyboard and my function keys no longer work with it.  I am used to have them used in the standard format, i.e. F10-F12 control the voume, etc.  I have the "Use all f1,f2, etc." button clicked.  I have also tried restarting my computer.  Any thoughts?

    Try doing a SMC reset and PRAM reset.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

    Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

    Standard troubleshooting...
    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove apps from Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    4. If still a problem restore with your backup.
    5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    6. If still a problem, it's likely a hardware issue.

  • Bluetooth No Longer Working With Headset

    I have a Motorola bluetooth headset that I've used with my ibook before without a hitch, but when I screwed up OS X and reinstalled it (note: reinstalled the operating system, but didn't format) it no longer works with the headset. I can connect to it just fine, but if I try to use it for anything such as switch my audio output to the headset, the program will freeze - same applies to using the headset for input. The headset isn't broken as it works fine with my phone, but my ibook won't cooperate and they are paired correctly. Is their someway to reinstall the bluetooth drivers or something to that extent? Thanks

    jrnet154 wrote:
    Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri
    If you have a headset, why use Raise to speak? Kinda defeats the purpose of the headset.
    Press and hold the button on your headest to call up Siri.

  • Firefox no longer working with Mac OSX 10.4.11

    i'm using Mac OSX 10.4.11 and Firefox 3.6.12. As i understand it any of ur upgrades no longer work with this computer system. ( I tried to upgrade last week and ur site said upgrades no available gfor my platform version. Last week every time i conducted a search (default Google) i was redirected to http://search.creativecommons.org/?q=crossword+puzzles&sourceid=Mozilla-search.what gives? Have I been hijacked? also sites that I use daily are clipped and entire pages are smaller than usual . see www.shockwave.com
    If u are no longer supporting Mac users, please let us know in advance or at least post it on ur site. Can no longer use Firefox...

    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Cmd+Shift+r to reload the page fresh from the server.
    (You also can clear Firefox's cache completely using:
    Firefox > Preferences > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now")
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
    Tools > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?
    If you open about:crashes, you should get links to online crash reports. You could post some of the crash IDs for review by volunteers here.
    Given the timing, another issue might be some ads or media in the page. There are some add-ons to block such things...

  • HT204416 My Safari is no longer working with many sites.  However Chrome and Firefox work fine.  I would like to re-install Safari in an effort to clear up the problem I can not resolve.

    My Safari is no longer working with many sites.  However Chrome and Firefox work fine.  I would like to re-install Safari in an effort to clear up the problem I can not resolve.

    1. From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    2. Select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
    and confirm. Test.
    3. If the above steps don't resolve the problem, please describe it in more detail.

  • Facebook and Slacker no longer working with Firefox. Still work with Explorer. Until a week ago problem did not exist.

    I am for about one week not able to input information on Facebook. Also the Facebook page appears in a huge font. Regarding Slacker I do not see any available online radio stations. Until about a week ago everything worked fine. At present I can work with Internet Explorer, but at present can no longer work with Firefox.
    == URL of affected sites ==
    http://www.facebook.com; http //www.slacker.com
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; .NET4.0C)

    Haven't tried facebook... But Slacker doesn't work for me either. Running 4.0b7pre on Ubuntu...
    Going to google it at some point, but slacker.com returns:
    VelocityViewServlet : Error processing the template
    Invocation of method 'init' in class com.rockit.webplayer.beans.BrowserDetect threw exception class java.lang.NumberFormatException : For input string: ""
    java.lang.NumberFormatException: For input string: ""
    at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
    at java.lang.Integer.parseInt(Integer.java:468)
    at java.lang.Integer.parseInt(Integer.java:497)
    at com.rockit.webplayer.beans.browser.DetectFirefox.detect(Unknown Source)
    at com.rockit.webplayer.beans.BrowserDetect.doInit(Unknown Source)
    at com.rockit.webplayer.beans.BrowserDetect.init(Unknown Source)
    at sun.reflect.GeneratedMethodAccessor49.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.velocity.util.introspection.UberspectImpl$VelMethodImpl.invoke(UberspectImpl.java:267)
    at org.apache.velocity.runtime.parser.node.ASTMethod.execute(ASTMethod.java:197)
    at org.apache.velocity.runtime.parser.node.ASTReference.execute(ASTReference.java:175)
    at org.apache.velocity.runtime.parser.node.ASTReference.render(ASTReference.java:220)
    at org.apache.velocity.runtime.parser.node.SimpleNode.render(SimpleNode.java:230)
    at org.apache.velocity.runtime.directive.Parse.render(Parse.java:181)
    at org.apache.velocity.runtime.parser.node.ASTDirective.render(ASTDirective.java:114)
    at org.apache.velocity.runtime.parser.node.SimpleNode.render(SimpleNode.java:230)
    at org.apache.velocity.Template.merge(Template.java:256)
    at org.apache.velocity.tools.view.servlet.VelocityViewServlet.performMerge(Unknown Source)
    at org.apache.velocity.tools.view.servlet.VelocityViewServlet.mergeTemplate(Unknown Source)
    at org.apache.velocity.tools.view.servlet.VelocityViewServlet.doRequest(Unknown Source)
    at org.apache.velocity.tools.view.servlet.VelocityViewServlet.doGet(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    at com.rockit.util.servlet.StatsServletFilterAction.doFilter(Unknown Source)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)

Maybe you are looking for