Konica Minolta magicolor 7450 Unable to print to Custom paper sizes

Hi
I have a Konica Minolta magicolor 7450 laser printer that (since switching to mac from windows) is unable to print to Custom paper sizes (entered in the print dialog box from within photoshop CS3) and nothing will print from illustrator CS3 at all.
I have OS 10.5.2 with the 10.1 photoshop update, and the 13.0.2 illustrator update.
When I use to use windows xp & photoshop CS2 I didn't seem to have trouble with this function, but since jumping over to mac & CS3, I can't print on any paperstock other than the defult sizes listed (which it dose perfectly) - I've re downloaded & installed the printers driver, downloaded & installed a firmware update for the printer and tried printing with a network cable & usb cable - all with no luck. I've also tried entering in the custom paper size in the printers LCD panel & setting in as default but it still wants to print on A4 or A3 paper...
Any ideas out there would be appreciated!

so I've been pulling my hair out for 2 days & nights now trying to figure out why I couldnt print on custom paper sizes - I've just now hit the "help" icon in the print dialog box and found this:
"Creating a custom page size
If you want to print on unusual size paper, such as an odd-size envelope or card, you may be able choose the paper’s size from the Paper Size pop-up menu. To find the Paper Size pop-up menu, choose File > Page Setup, if available. Otherwise, choose File > Print.
If you can’t find the size you need, you can create your own custom paper size.
To create a custom page size:
Open the document you want to print.
Choose File > Page Setup, if it’s available. Choose Page Attributes from the Settings pop-up menu, and then choose Any Printer from the Format For pop-up menu.
Choosing Any Printer ensures that your document can print on any printer that supports the paper size you select.
If Page Setup is not available, choose File > Print.
If the Print dialog contains only two pop-up menus and some buttons across the bottom, click the disclosure triangle beside the Printer pop-up menu.
Choose Manage Custom Sizes from the Paper Size pop-up menu.
Click the Add button.
Type a name for the paper size.
Enter values in the Paper Size and Printer Margins field."
All I had to change was the "any printer" setting from my (konica minolta) printers name to "Any Printer"!! now my custom paper sizes are printing fine and dandy!! phew!!!!!!!!

Similar Messages

How do I get OS X to ask printer for custom paper size

I am printing postcards. These are 1/4 of a letter sheet, or 5.5" wide x 4.25" tall.
I have a commercial grade HP Laserjet 4350, and I've configured that size in its custom menu for tray 1 (the envelope feeder tray). The printer is happy.
I've also set a custom paper size in the MacOS, that I've called "Postcard Quarterpage" and I have that selected in the print dialog. In fact I made it default.
However, under Paper Handling, it says "Destination paper size: Suggested paper: US Letter" and this is greyed out. If I check "Scale to fit paper size" which I Do Not Want, then I can pick a variety of sizes. However my custom size is not in the list.
This happens on all applications, so it is definitely OS X Mountain Lion (latest patch).
Anyway, the upshot is MacOS requests US LETTER size from the printer, so the printer goes "Take this postcard stock out and gimme US LETTER". The printer can detect paper sizes. If I try to give it postcards anyway, it blows an error and won't print, which is what it should do.
How do I get OS X to tell the printer "Gimme 5.5x4.25" like I've instructed it?

Hi there Wolf!
I have a couple of articles here that I believe will help you out with your question. First, here is an article with some information on custom paper sizes:
OS X Mountain Lion: Manage custom paper sizes
http://support.apple.com/kb/PH10748
Note that in that article, it states:
Custom paper sizes aren’t available for some printers.
The reason for that is because this is controlled by the driver for the individual printer. You will want to make sure you have the latest version of the printer driver installed on your computer. More information on this can be found in the following article:
Printer and scanner software available for download
http://support.apple.com/kb/HT3669
It might also be helpful to reset your printing system to see if that will resolve the issue. More information on this process can be found here:
Mac OS X: How to reset the printing system
http://support.apple.com/kb/HT1341
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Can't print using custom paper size for HP6520

I'm trying to print Hobby Lobby RSVP cards for a wedding. The size is 5.5" X 8.25". My HP6520 keeps giving me an error that the printer has detected a different size of paper and it won't print. I've gone to Custom and set the size to match, but it still won't print. I have the paper in the bottom tray.

Hi @Saltman1,
Welcome to the HP Forums!
I noticed that you cannot print on a Hobby Lobby RSVP card size is 5.5" X 8.25" with your HP Photosmart 6520 on Windows 8. I am happy to look into this for you!
According to your printer's specifications, this is an unsupported card size for this printer. The supported card sizes are:
Card type
Card size
3 x 5 in Index
76.2 x 127 mm (3 x 5 in)
4 x 6 in Index
101.6 x 152 mm (4 x 6 in)
5 x 8 in Index
127 x 203.2 mm (5 x 8 in)
However, as a workaround, you might be able to assign an alternate driver by going to this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by @Shane_R, and then doing a custom size print by going to this guide, Create Custom Paper Sizes in Windows 7, Windows 8, and Mac OS X.
Otherwise, I would suggest getting the proper size of paper for this printer as indicated in the chart above.
Hope this information clears things up for you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Check Printing on Custom Paper size

Hi All,
I am using RTF template to print checks using XML publisher. I generated the PDF file and it prints fine on a regular 8.5 * 11 letter size paper.
When I print on real check which is 8.5 * 7 size, it does not print correctly. I am using the HP regular printer.
Do I need to define a custom size and change the RTF template. Can someone send me the steps they have to do to print on real checks, I would greatly appreciate.
Thanks in advance!

Thanks for your reply.
I do not have problems with the layout. My issue is how to print on a 8.5 * 7 size check paper. The printer knows only the standard paper sizes. We need to create a new custom size paper setting that the printer can understand. I need some help on this.
I was hoping someone would have gone through this trouble to make it work.
Thanks.

Trouble printing on custom paper sizes

I have a project that requires a print on a 5" x 20.5" sheet of paper. I have the MG5320 inkjet printer. I created two of the same images, one with photoshop and the other with word. I setup my page as 5" H x 20.5" W, and tried printing in landscape mode with no luck. The print only prints about 6" of the middle of the image on the leading side of the paper. I have tried various paper settings and orientations, as reversing the dementions. The largest print I can get is on a 8.5 x 11 sheet of paper. I used the rear tray loader. I am working on a iMac running the latest OS. Are these printers capable of printing banner type prints? Any help will help. Thanks

I'm sorry to say that you won't be able to print to a 5" x 20.5" sheet of paper. The maximum paper size that the PIXMA MG5320 support is 8.5" x 11.7." You may want to visit a local print shop for assistance with a banner print.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Hp C7280 Printing on custom paper size & card template?

Hello,
I have a Hp c7280 all-in-one connected to a laptop running vista. I am trying to print some greeting cards on card stock I ordered (5 1/4" x 10 1/2"). I can't seem to get this to work. The size does not seem to be available to select, but surely there is a way to print to a custom size. Help!
Also, does anyone know if there is a template or the best way to go about print cards with a picture on the front and text on the back?
Thank you!
Brandon

You can set-up a custom size using Printing Preferences > Features > Size.
Don't forget to give your custom form a name.
Also take a look at Avery DesignPro 5.4 software.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Portrait printing problem on custom paper size

Hi,
i want to print on custom paper size - 500x700mm, but cant set custom paper size straight in Illustrator, only in printer driver. When I set it up and print file, all shapes are smaller on print than in file! Same thing happens with 320x450mm size. After some searching i tried to print it in landscape (wider side in printer) and everything is ok!!! but when i get back to portrait it is all smaller again :/
On pre-intalled A4 size everything is ok.
Can anyone help me, i want to print on 700x500mm but my printer is only 600mm wide ;/
Tried to change any possible fit, resize and rotate option throughout app, system and in printer with no success.
Specs:
Mac OS 10.9 (Retina MBP 15)
Illustrator CC and CS5 (tried on both)
HP DesignJet 510 (CH336A)

Yeah, HP tech support is iffy at best.
I think you're on the right track.
I don't think the issue is Illustrator. In my experience, the Art Board feature is exactly what is warranted for custom page sizes.
I also wouldn't think it is an OS issue, as the drivers need to conform to OS development rules. If the driver "says" it can do it, it SHOULD do it. If it doesn't, that's not the OS's fault.
In cases where you're trying to go "outside" the page-size presets of the printer driver, this is where people encounter problems, which is why I think the issue is the print driver. My solution has been to use an existing page-size preset, and hand-trim after printing. But in quantity prints, this becomes a pretty serious problem.
One other thought. Someone else on this forum found that they could use custom page sizes (with certain printers) if they always fed the paper in its "tall" position, rather than feeding it in "wide." This might require you to rotate artwork in ai, I'm not sure. But it's worth a try in attempting to get your custom page size to print properly.
Good luck.

Has anyone successfully printed on Konica Minolta Magicolor 2530DL on Mac OS X 10.9

Has anyone successfully printed on the Konica Minolta Magicolor 2530DL after upgrading to Mac OS X 10.9?
Also has anyone successfully printed on the Epson EPL-5700i after upgrading to Mac OS X 10.9?

I realize that most people tend to visit the forums to report problems rather than visit the forums to report successes after an upgrade. And I appreciate John Blanchard1's taking the time to reply to my posting.
Dakoda mentions problems printing to a Konica Minolta C280 and the thread that John Blanchard1 posted refers to problems printing to both Konica Minolta BizHubs (C652 & 501).
However, the existence of these problems with other KM printer models does not let me know if anyone has been successful printing to the Konica Minolta Magicolor 2530DL after upgrading to Mac OS X 10.9 or even if anyone has had a problem with printing to the 2530DL after upgrading to 10.9.
On October 28, 2013, a Konica Minolta technical support agent told me -- after checking with his supervisor -- that regarding the Konica Minolta Magicolor 2530DL that they will not be upgrading the 2530DL printer driver. In fact they have not upgraded the driver since 10.6. I learned on their support site that the 10.6 driver has continued to work with 10.7 and 10.8. They have not yet updated their support site for compatibility of their line of printers with 10.9.
So I would like to find evidence that this printer has continued to work for someone after the upgrade to 10.9 rather than upgrade and then have to downgrade to still be able to use this printer.

I am trying to connect my macbook pro to a konica minolta magicolor 1690MF

I am trying to connect my macbook pro to a konica minolta magicolor 1690MF printer/scanner. I tried to download drive software from the konica website, but I still can't add the printer to my system.

Depends on your model TV. Read your TV user manual. The newer models have "how to hookup" instructions for computer & games.
You can also do a forum search as well as a Google search.

Can't install scanner driver for Konica Minolta magicolor 1690mf

I've successfully installed the printer driver for my Konica Minolta 1690MF multi-function printer/scanner/fax.
However, when I go to try an install the scanner driver, the following error appears:
"mc1690MF Scanner can’t be installed on this computer.
The operation system is not adequate for running magicolor 1690MF."
I am running 10.6.1.
I downloaded the drivers from the konica minolta website, and it claims the drivers are compliant up to 10.5 (http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=1167 )
Is there any way to get a scanner driver that is compliant for the snow leopard OS? Is there an alternative to waiting for the manufacturer to update their drivers?

I am having the same problem. I was able to scan last week and suddenly this week image capture cannot find the scanner. The Konica Minolta Magicolor 1690mf prints fine but scanning is not functioning. I looking at drivesr on Konica Minolta's site but there were none for os 10.6.1. I called them in and they could not suggest anything other than reloading the printer. They could not tell me if this was a known problem. The person I spoke with says that with apple making the updates it might be a couple of months before they have a driver for it..... how frustrating I can't use the scanner for a couple of months??? Any suggestions out there?

Konica Minolta Magicolor

I did not see these on the list: Does anyone know whether the Konica Minolta Magicolor 2430DL printer is compatible with Airport Express? Same question for the Konica Minolta Magicolor 2550 DN. Thanks.

wambo0402 wrote:
the installation went fine but in the Systemproperties I only see the printing function for the device. The second button for scanning isn't there.
You will only get the Scan button if KM supplied an ICA driver. If their driver is TWAIN-based, then you will need to use an application like Adobe Acrobat Standard or Pro to scan with. Or KM may have their own scanning application.
If the scanner driver is ICA based, then try opening Image Capture. If the KM is networked, it will appear under the heading of Shared and selecting it will either work or you will get an error about the lack of driver, thus confirming that the scanner driver is not ICA-based.

Konica Minolta Magicolor 2300DL Drivers

I hope to someday to buy a Mac Mini and would like to know if there are drivers for the Konica Minolta Magicolor 2300DL.
I was at a Mac Store today and asked one of the employees if there are drivers for the Magicolor 2300DL on a Mac Mini and he went to Konica Minolta's Webpage and did a search for Magicolor 2300DL Mac Drivers and there the drivers were for Windows Mac and even Linux.
When I got home I went to http://kmbs.konicaminolta.us/ and could not find any Mac Drivers, all they had were Vista and below, not even Windows 7 drivers.
Where can I get MAC drivers for the Magicolor 2300DL for what ever the latests version of Mac OS is?
Thanks.

Try this > http://printer.konicaminolta.net/drivers/mac/2430dlppc.dmg
Configure the protocol as HP Jetdirect.

Unable to Set Custom Paper size setting of 15 (width) x 12 (Height) using J

Hi,
     I am unable to print the report using the custom paper size setting of 15 (width) x 12 (Height) with printer friendly fonts so that we can print on Line or dot matrix printer.
     This problem is not solved from last 3 months and we dont get help anywhere.
     We are using Java with Crystal Report XI R2 design for the same.
                       ITable table=null;
DatabaseController dbCtrl=null;
ReportClientDocument oReportDoc=null;
try {
String reportName=fileName;
oReportDoc=new ReportClientDocument();
oReportDoc.open(reportName,0);
dbCtrl = oReportDoc.getDatabaseController ();
rs=ad.sqlStringBigST(query);
table = dbCtrl.getDatabase ().getTables ().getTable (0);
dbCtrl.setDataSource (rs, table.getName(), "Runtimeres");
Object oreportSource=oReportDoc.getReportSource();
IReportSource reportSource=(IReportSource)oreportSource;
PrintReportOptions printOptions = new PrintReportOptions();
printOptions.setPrinterName("EPSON FX-2175 ESC/P");
printOptions.setPaperSize(PaperSize.useDefault);
options.setPaperSource(PaperSource.manual);
oReportDoc.getPrintOutputController().printReport(printOptions);
} catch (Exception e) {
System.err.println(e.toString());
Please let me know what is the solution for the same.
Regards,
Raj

Hi,
    Yes i can understand that you need to first understand the root of the problem to give me the solution.
    I am here to answer to your questions until you understand what is the problem.
    Yes if i set the standard page size which are given in API doc , it sets up the page correctly.
    Following page size as given in the API doc works fine.
    http://devlibrary.businessobjects.com/businessobjectsxi/en/en/RAS_SDK/rassdk_java_api_doc/doc/rassdk_java_apiRef/com/crystaldecisions/sdk/occa/report/document/PaperSize.html
   It is rejecting the custom paper size and custom fonts (which in my case are printer friendly fonts).
Regards,
Rajshekhar SIpoy

How do I print on a greeting card in landscape when I can't save custom paper size?

I have a J6450 running on XP SP3 with the latest drivers and patches installed. I have greeting card stock measuring 6.5 by 10.0 inches and a Microsoft Word document with a custom paper size matching the that stock prints in landscape mode. The printer error is "Paper Mistmatch. Paper size or type is incorrect." I have followed the suggestions on the HP support page, changing the Print, Properties, Features options to show "Other greeting card", but can't define a custom paper size to match the stock. The Save option is not available. What do I need to do to make this work?

Here is a link to a HP document for adjusting several settings that may help with your issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01824353&tmp_task=solveCategory&cc=us&dlc=en&la...
Dave M.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
I am an HP employee.

Custom paper size with HP Officejet 7500A Wide Format e-All-in-One Printer

I am wanting to print on a paper size 12x18. I do not find a "Custom" paper size on my printer HP Officejet 7500A Wide Format e-All-in-One Printer. Is there another driver which I can download which would allow me to enter custom paper sizes?

I am wanting to print on a paper size 12x18. I do not find a "Custom" paper size on my printer HP Officejet 7500A Wide Format e-All-in-One Printer. Is there another driver which I can download which would allow me to enter custom paper sizes?

Konica Minolta magicolor 7450 Unable to print to Custom paper sizes

Similar Messages

Maybe you are looking for