Konqueror not showing storage media content

Hello,
I have this problem with the new kde 3.4.2 and the 3.4.1-? that was out before it. It was working before that.
The problem is that files/directories are not shown for CDs in the Storage media section of konqueror and once mounted, the device stays busy until konqueror is closed.
In more detail: If I open konqueror in file management mode and go to the services tab -> Storage media, I can see the cd-rom disk. If I click on the icon, it mounts the drive (verified by doing an ls of /media/cdrom before and after) but no files are shown in the konqueror window. I can go to the root folder tab and navigate to /media/cdrom and the files are there and can be copied to disk, etc.
In konqueror (back in services->Storage media) right clicking the icon to eject fails with an error box. If I try to unmount the drive on the command line, I get a 'device is busy' error until I exit konqueror, then it works.
I tried running konqueror from the command line, but it does not show any relevant messages.
I use udev, dbus, hal. No special udev rules or symlinks, just the arch default.
ls -l /dev/hdc
brw-rw---- 1 root optical 22, 0 2005-07-22 04:31 /dev/hdc
...and my user is in the optical group (obvious since I am able to mount/unmount by hand).
Any ideas?

I didn't have the storage problem (anymore...), but kdebase 3.4.2-3 solved other problems for me (being unable to enter some directories from Konqueror, and dog slow audioCD rips via the VFS).
Well done, nonexistent packager!
The only quirk ATM is that kscd does not "see" any audio engine anymore (BTW this also applied for the previous kdebase version), it does read the audioCD and starts playing back, but remains silent...
Since kaffeine, or Amarok works (the latter only with the Arts engine- gstreamer and xine seem unable to use the KDE VFS) this isn't much of a problem, just wondering why kscd can't spot artsd...

Similar Messages

Safari will not display some media content despite Flip4mac loaded

As the subject indicates, Safari will no longer display some media content after installing Flip4mac. Where that media content would normally display all I see is a square with the Quicktime logo in the middle and a question mark in the middle. For example see the Dakar Rally site http://www.raid-live.com/dakar/en/index.shtml#. In my case Safari does not display the Flash content relating to "Premium Offers".
Mozilla displays everything fine though I don't particularly want to move between browsers depending on the on-line content. I'd rather not use Mozilla as in some cases the page appearances aren't as neat as those displayed by Safari.
Is there a way of restoring Safari back to its default settings in order get it to play ball.
Cheers
Chris

Also a possible explanation is Safari cache files. Safari can be quite stubborn about holding on to these and refusing to let go of a cache file for a page, not showing up-dated content. Since the new user account didn't have any cache files Safari displayed the file correctly there, and used a "bad" cache file in your original account. Even clicking reload doesn't necessarily force Safari to take a new look at the page code. Drives me batty sometimes. If that is the problem you can go to the Safari menu item, choose Empty Cache and try again. I'v had instances though where I had to empty the caches and quit and relaunch Safari to get it to display a page properly.
Another thing to do, to make sure something is a Safari specific problem rather than a system problem, is to download Firefox and try it with a funky page. If the page works in Firefox, but not Safari, you know it is Safari being funny and not your system.
My truck was running rough the other day when I moved it to wash it. Was not looking forward to using it to haul stuff the next day, but when I started it then it worked just fine....
Francine
Francine
Schwieder

HT1688 I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content.

I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content. Any Suggestions?

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

When I go to my webpage it comes up blank I right click to get the page info and it is not showing the media and load images is checked

I have an online business and when I go to my websites they come up blank. I went to the same site on my other pc and it loads just fine. When I checked the page info and compared the two the one that loads ok shows general, media, permissions and security and the other shows everything but media. How can I get this back? I've checked everything I can think of. Load images is checked

According to http://en.wikipedia.org/wiki/IPhone_5
the iPhone5 has 1GB of RAM, and internal storage of 16, 32, or 64GB.
It does not use SD cards.
Fake iphones are really Android phones using the skin of iOS6.
Click on the App Store icon. If it takes you to Apple's App Store, then it's a real iPhone.
But if you are directed to Google Play, then I'm afraid you've gotten a copy.

AppleTV not showing non-synced content since upgrade to iTunes 8.1.0.52

Prior to upgrading to 8.1, my non-synced content showed on my AppleTV (when iTunes was open on my computer). Following the upgrade, the only content showing on the AppleTV is content that is synced to it.
iTunes can see the AppleTV and I can sync content to it. Under "Settings" for the AppleTV I have "Custom Sync" selected and the "Show only synced content on my AppleTV" box is not checked.
Any ideas how I can get non-synced content to show again in the AppleTV?

That's exactly what I did, it took ~20sec to complete the "apply to enclosed items" command (there was heavy disk access), but it does not improve. The permissions stay the same for the files/folders in question. It's very odd, have a look at the screenshot:
Some folders have correct permissions, others (to which I have no access through iTunes) show "admin" twice as the only user who is allowed to write. Repair permission does not help. I have hundreds of files/folders where permissions are wrong, only since the upgrade recently.
http://img4.imageshack.us/img4/33/permission.png
Message was edited by: JJulian (added screenshot)

ITunes suddenly not showing all my content, even though the folder does

All of the sudden, iTunes stopped showing all of my content. I have over a hundred movies and several TV shows and all of the sudden, some of the newer stuff that I recently ripped or bought from the iTunes store is no longer showing up in iTunes.
It is still in my iTunes folder however and open and accessible if I click it in Finder. This however is not a good solution as I don't know what is missing from the list and how this ridiculous issue happened.
I am furious. I spend a lot of time adding to my iTunes library for my Apple TV and suddenly, and for no reason that I can discern, content is not showing up, no matter what I do.
I recently moved my iTunes library to a 2 TB Time Capsule and took it off my internal drive, but this worked fine. For a while iTunes kept losing the library, but it no longer asks for it. It points to the right place, plays the content it chooses to see from the right place, and ignore others even though it showed them before and still has them in the library.
I am beyond confused. Can anyone help?

Check on the Summary tab of your iTunes sync settings that you checked "Sync only checked songs and videos" and that you checked "Sync Music" on the Music tab. Also confirm that your computer authorized for the Apple ID used to purchase this music (in Store>Authorize this computer).

ITunes & iPhoto on external drive not showing in Media Browser

I moved my iTunes and iPhoto libraries to a NAS device on separate hard drives. Independently they work and I can access them through their respective programs, HOWEVER, when I want to use them in Keynote, Pages, iMovie, etc. they don't show up in the media browser. I have a couple of questions...
1. Will the media browser work with these libraries on external sources?
2. Do I need to set up some sort of alias on my Mac HD to point the media browser to those libraries?
3. If so...how?
Hoping someone has the answer, or at least can point me in the right direction...

I am not sure if they will work off a NAS, but I don't see why not. (But iMovie Events will not work off a NAS)
See this post and focus in on the part about trashing the iApps plist. I would try to trash it and then open up iPhoto and iTunes to repopuplate it. Then try to see if the Media Browser works in iMovie. You should not need to trash the iMovie plist, but it would do no harm if you did.
https://discussions.apple.com/docs/DOC-4061

Apple TV is not showing all netflix content in Canada

I've noticed a lot of content available on Netflix Canada is not available through Apple TV. Programs like The West Wing, Louie, The Good Guys, Manhattan, etc. They don't even show up in a specific search. It's not just a case of displaying only 75 titles, or whatever I've read the app does. I've called Netflix and they say that it's Apple's Netflix app issue and that Netflix have nothing to do with it and therefore can't do anything about it. What's going on here? Why would the Apple Netflix app remove content from the Netflix stream, especially when it includes some of the most highly viewed content like The West Wing? How or who decides what stays and what goes?
We don't yet have instant queue in Canada so I can't queue it up on a web browsers and watch on ATV. Also, watching a few minutes of one of these shows on a computer does not put it in my recently watched category on ATV, as the Netflix support person though that it would.
There must be a lot of people with this problem but there is very little info that I've been able to find out there.
Does anybody have any thoughts or advice?
Thanks

I had the same issue until I found the missing movies in the "Home Videos" folder on the Apple TV.

Photos not showing in media viewer

Hi.. I am using iweb 09 to build my website.
However I cant view my photos that I have in Aperture, in the media viewer in iweb.
I only have the one Aperture project on my laptop, and all of the non-edited... and edited photos within that project don't show in the media viewer in iweb... So I cant drag the pictures I would like to include on my website from the media viewer.
I tried closing iweb and deleting the plist in my home folder but no difference. i un-stacked all the photos in Aperture to see if they would show up.. no luck either.
Can anyone suggest anything please... All my updates are up to speed..
Thanks..... Gerry

windhoveruk wrote:
...81 images (...) But iweb media browser is only seeing 40 of them (...) All the pictures within the project are Canon .CR2 and .PSD files...
Gerry ~ Are the 40 all .CR2 files, or all .PSD files?
According to Wikipedia, RAW image files such as .CR2 +"fulfill the same role as negatives in film photography: that is, the negative is not directly usable as an image"+...
http://en.wikipedia.org/wiki/Rawimageformat
...Perhaps that's the reason media browsers don't see them. For suggestions on converting .CR2 files click HERE.

Photos not showing in media view but are in catalogue

In Elements 12 not all photos are showing in the standard ALL MEDIA view, but it says they are in the catalogue if I trey to import a sample of the missing photos. Most of my albums are blank too.
It was working fine yesterday but the problem has occurred today.

Hi,
Please check if the photos you are looking for are not hidden.
For this, go to:
View> Hidden Files > Show all files.
Thanks!!

Wrong pictures, no-shows, after editing... when running a preview or in full movie mode, iMOVIE does not show exactly the content as was provided in the project field. All files works great in iPHOTO.

Version: iMOVIE 11, 9.0.4
No new updates, 7 sept 2011.
Something is wrong with the project that I am working on.
When I add new pictures and movies, some of them will not be played in the preview or fullmode at all. Some pictures are wrongly understood by iMOVIE or there are some kind of weird errors or bugs in the program. I dont really know what the problem can be. All of the pictures and movies are imported from 2 cameras, Kodak and Canon, and they all work great in iPHOTO.
I also use tranistions, text, etc, to make the movie look good.
Here are some examples of the error, all of these picture where taken while running the preview movie. You can see the moment in the movie process by following the red line in the project field window.
1) Here you can see that it shows the wrong picture in the preview compared to the project field.
2) Here it shows the wrong picture and it also displays the wrong picture in an undesired strecthed mode.
3) Here are 2 examples of one picture that blocks the other pictures from beeing seen in the video.
What could be causing these stupid errors and bugz? Until this is solved I have stopped workoing on my movies and project, awaiting a fast fix.
Thank you!

Try this step:
Go to one of the problem points (or even all of the them in the Project Browser) and select it. Under the File Menu>Optimize>Large (960x540). See if will process the clips, still images and try playing it back again.
If Optimize>Large is grayed out, try pulling the clip out of the Project Browser, close iMovie. Open it up again and putting that clip back in its place. Then try to Preview it again and see if playsback properly.
Last thing to try is go to File Menu>Duplicate Project, quit iMovie. Open iMovie, go to the Duplicate Project and see if you get a working Preview from the Project Timeline.

Most aperture photos not showing in media browser

I have Aperture 1.5 and I can view all of my albums from the media browser, but when I click on an album, most of the thumbnails are exclamation points and they wont drag into any pages documents. Some photos in the albums show up and they go into my documents just fine.
I have gone into aperture and selected ALL 13,508 photos and forced thumbnail regeneration, but I am still having the same problem.

help

Email & attachments ALSO webpages--not showing the same content as computer

Having several issues...
I have (as an example) bookmarked (on my home computer) a www.weather.com link (showing radar images for my city), the bookmark was sync'd to my iPhone, and WAS working fine, however now whenever I try using the link, it is a different webpage...almost like a modified phone version of the www.weather.com site. I can use the same link on my computer, and it shows the page I want, but now on iPhone it's different. I've tried deleting cookies and cache's, but every time I go to this bookmark, a different version of the weather page come up. Almost like a 'watered down' version. How can the same bookmark get different pages on my computer and on iPhone?
ANOTHER issue... I have tried testing this by forwarding an email to myself.... I have an airline itinerary from an airline that was sent to my email (from the airline website) and it comes through as the typical formal itinerary 'look'. If I forward this email back to myself, it doesn't come across the same with the formal look, only the text format on my iPhone. BUT, it comes through perfectly on my computer. Again, same email, but viewing it on my computer show the original formal itinerary, but viewing on my iPhone is again, some kind of watered down text only format.
Any ideas??? Thanks!
Sarah

Thanks for your reply... for the www.weather.com website, I get the same result using either Edge or WiFi, even if I manually enter in "www.weather.com" and not use the bookmark, it changes to xhtml.weather.xhtml and gives me this other version, which I am assuming to be the mobile version. The mobile version appears to be faster that the 'real web' version, but I'm still wondering why this would be giving me the mobile version. It was working fine, but in the last day or so, I've been getting this mobile version....
On the other issue, with the emails... why would my messages be coming across as just text? I can forward an 'html' email from my iPhone (using Yahoo), showing the itinerary I received for my trip, with all the graphics, and when I login to my Yahoo email on my computer, I see the exact same original email. Then I go to my iphone and read the message, and it's in text format. Any ideas???
Thanks!

Macbook not showing storage correctly

Hey I have macbook pro mid 2012 and recently i updated to Mac OS X Yosemite.
In the past i checked how much memory I had through the about this mac and under the storage tab. Lately I have seen that apps is Showing it has consumed like 135 GB of memory however on the top it says it has only used 715 free of 748 there is still plenty of memory in my mac i am just wondering if this can fixed with a future system update or anyone else has seen this???
Thanks

Spotlight: How to re-index folders or volumes - Apple Support

Lenovo Recovery Media not showing recovery media

My T430 has an issue with creating Product Recovery discs. It doesn't give me any options for recovery media. The drop down meny is totally empty. Clicking "update" does nothing. I have updated the software, and rebooted several times, no success. I have a portable USB drive, which I'm going to use as a recovery media.
The issue is the same with Lenovo Solution Center and ThinkVantage Tools.
Any ideas what might cause this problem?
Thank you and regards,
-Gary
Solved!
Go to Solution.

definitely create the recovery media on dvds. then you should be able to recreate the factory-delivered os onto whatever drive, hdd or ssd, compatible/installable with your laptop.
how you make a backup, and what's included in it, can be accomplished by any number of applications, including Windows' own internal utility. what you choose is largely a matter of personal preference.
regards.
edit: spelling.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Konqueror not showing storage media content

Similar Messages

Maybe you are looking for