Konqueror segfaults with flash enabled

Using Konqueror 4.5 with the webkit kpart segfaults with flash enabled. Hopefully will be fixed with the 4.5.1 release. So i can finally get rid of the gtk browsers.

kwebb1 wrote:Using Konqueror 4.5 with the webkit kpart segfaults with flash enabled. Hopefully will be fixed with the 4.5.1 release. So i can finally get rid of the gtk browsers.
Use Opera10. Not Gtk, but not quite Qt...OTOH it works Something which cannot be said of Webkit browsers on 64bit Arch, as the latest lib32-only Flash release does not work.

Similar Messages

Firefox segfaults with Flash content. x64. [Solved]

I'm running 64 bit Arch version 2010.05 and I installed flashplugin. When I navigate to a Flash website Firefox segfaults. It also happens on other pages such as Gmail. Chromium doesn't segfaults with Flash or any other page but Flash doesn't work either. If I uninstall Flash Firefox doesn't segfaults anymore, even on pages that don't use Flash. Any ideas?
Update: I downloaded the 10.1 64 bit alpha from Adobe but it still doesn't work. Chrome doesn't report any problem on the console but Flash doesn't work and Firefox still segfaults.
Thanks in Advance.
Last edited by juanpablo (2010-06-01 01:53:37)

I installed 32 bit Flash using nspluginwrapper. Everywhere I read it says that the flashplugin package should install a working 64 bit plugin but it doesn't work. Firefox segfaults with this plugin and Chrome doesn't show any flash and complains about an ELF32 binary.
sand_man: Can you please post your libflashplayer.so so I can try it? Thanks! At least your md5sum to compare.
EDIT: Chrome doesn't complain anymore but still doesn't show any flash. Firefox still segfaults.
Last edited by juanpablo (2010-05-31 17:43:32)

Firefox hangs on all sites with flash content.

Firefox hangs on all sites with flash content. If I disable the flash plugin there is no hanging but obviously no flash content either. I have tried all the suggested actions found in the help sections for hanging and plugin problems. The Honda UK site listed below is one of many I am unable to access with flash enabled.
== URL of affected sites ==
http://www.honda.co.uk/

Chris Campbell wrote:
The key here will be to determine what is different between the machines that work and those that hang. Of all the systems that fail, they are all Windows 7 32bit?
Yep, this issue only happens on Windows 7 32-bit machines, currently 6.
Do you have any 32bit systems that don't fail?
Yep, the most Windows 7 32-bit machines wont fail.
What about hardware, are there similarities here? Attached devices/drivers? Software that is running at the time?
These machines are all from DELL. They all have normal hardware, nothing special. Other machines from same type does not affected. Software: All have standard software distributed via Software-distribution (GPO). Only some PCs have special software, but it is not running. No special drives, too.
Maybe try booting Windows in safe mode to see if it still hangs?
Good idea, indeed - I will try this.
We're definitely interested in what's going on. I'll ask our security and Mozilla folks to see if they have additional clues.
Thanks!
EDIT:
Safe mode: Flash is working! (without disabled Protected Mode!)
I've set msconfig now to: Custom system start and deselected the boxes to load systemservices and system start elements.
So, now windows does a non-safe mode boot but no service or element was loaded except the drivers (right?). Flash is not working with this config!
So, whats the difference between safe mode and normal boot with minimal configuration (see attached picture).
Only drivers will be loaded, right? If so, I can exclude the network and graphics driver as source: graphics driver are updated right now and network was working in safe-mode.
Any new ideas?
Informations about safe-mode

My Firefox keeps crashing with flash websites

My Firefox keeps crashing with flash enabled websites. I disabled all plugins and addons and keeps doing it. Cannot browse the web for more than a couple minutes without a crash. Crash reports is basically always the same with the exception of the site where the crashing event is triggered.
AdapterDeviceID: 0x0611
AdapterVendorID: 0x10de
Add-ons: savesession%40noasobi.net:1.3.1.6,%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:20.0.1
AvailablePageFile: 4720615424
AvailablePhysicalMemory: 2675757056
AvailableVirtualMemory: 1845903360
BuildID: 20130409194949
CrashTime: 1368383965
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1367196491
Notes: AdapterVendorID: 0x10de, AdapterDeviceID: 0x0611, AdapterSubsysID: 00000000, AdapterDriverVersion: 6.14.11.8618
D3D10 Layers? D3D10 Layers- D3D9 Layers? D3D9 Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 228
StartupTime: 1368383939
SystemMemoryUsePercentage: 23
Theme: classic/1.0
Throttleable: 1
TotalVirtualMemory: 2147352576
URL: http://www.youtube.com/
Vendor: Mozilla
Version: 20.0.1
Winsock_LSP: Amplusnet LSP over [MSAFD Tcpip [TCP/IP]] : 2 : 1 :
Amplusnet LSP over [MSAFD Tcpip [UDP/IP]] : 2 : 2 : C:\WINDOWS\system32\PCProxy.dll
MSAFD Tcpip [TCP/IP] : 2 : 1 : mswsock.dll
MSAFD Tcpip [UDP/IP] : 2 : 2 : mswsock.dll
MSAFD Tcpip [RAW/IP] : 2 : 3 : mswsock.dll
RSVP UDP Service Provider : 6 : 2 : mswsock.dll
RSVP TCP Service Provider : 6 : 1 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{77EF9ABB-4B1B-4D36-AB76-8BC526DFB0D3}] SEQPACKET 5 : 2 : 5 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{77EF9ABB-4B1B-4D36-AB76-8BC526DFB0D3}] DATAGRAM 5 : 2 : 2 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{5D33D080-0BD0-4AC0-81B4-7D4E389A9F2F}] SEQPACKET 4 : 2 : 5 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{5D33D080-0BD0-4AC0-81B4-7D4E389A9F2F}] DATAGRAM 4 : 2 : 2 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{D373E84F-B180-430A-9292-4DAC7E089C1A}] SEQPACKET 3 : 2 : 5 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{D373E84F-B180-430A-9292-4DAC7E089C1A}] DATAGRAM 3 : 2 : 2 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{0ECC35C1-A8D8-47BE-A8DC-F4F3D54A2973}] SEQPACKET 0 : 2 : 5 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{0ECC35C1-A8D8-47BE-A8DC-F4F3D54A2973}] DATAGRAM 0 : 2 : 2 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{AE676D95-0EAB-4DCF-8901-63F56860A6E0}] SEQPACKET 1 : 2 : 5 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{AE676D95-0EAB-4DCF-8901-63F56860A6E0}] DATAGRAM 1 : 2 : 2 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{BA734C90-C8ED-4551-BEF2-A35F5632D3E4}] SEQPACKET 2 : 2 : 5 : mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{BA734C90-C8ED-4551-BEF2-A35F5632D3E4}] DATAGRAM 2 : 2 : 2 : mswsock.dll
Amplusnet LSP : 2 : 0 : C:\WINDOWS\system32\PCProxy.dll
This report also contains technical information about the state of the application when it crashed.

If you open a new tab in Firefox to the '''about:crashes''' page you may be able to click through to your crash data on the Mozilla's crash stats server. These page have a link you can post here for volunteers to take a look. Check the date/time on the crash, though, to make sure it is for the relevant time period.

Help Editing code from a published html file with flash detection enabled from flash

hi guys ive publish a html file with flash detection enabled from flash
heres the code from the publish html:

<html lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>main</title>
<script language="javascript"> AC_FL_RunContent = 0; </script>
<script language="javascript"> DetectFlashVer = 0; </script>
<script src="AC_RunActiveContent.js" language="javascript"></script>
<script language="JavaScript" type="text/javascript">

</script>
</head>
<body bgcolor="#ffffff">


<script language="JavaScript" type="text/javascript">

</script>
<noscript>
     // Provide alternate content for browsers that do not support scripting
     // or for those that have scripting disabled.
       Alternate HTML content should be placed here. This content requires the Adobe Flash Player.
       <a href="http://www.macromedia.com/go/getflash/">Get Flash</a>
</noscript>
</body>
</html>
now since the default codes places my flash movie on upper left corner, ive made my own tables with the flash on it, how or where do i place this code to the upper codes?
<table width="100%" height="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
    <th valign="middle" scope="col"><table width="800" border="0" align="center" cellpadding="0" cellspacing="0">
      <tr>
        <th height="600" bgcolor="#333333" scope="col"><script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','800','height','600','src','main','quality','high','pluginspage','http://www.adobe.com /shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','main' ); //end AC code
</script><noscript><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="800" height="600">
          <param name="movie" value="main.swf">
          <param name="quality" value="high">
          <embed src="main.swf" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="800" height="600"></embed>
        </object></noscript></th>
      </tr>
    </table></th>
</tr>
<tr>
    <td height="30" bgcolor="#990000"><table width="800" border="0" align="center" cellpadding="0" cellspacing="0">
      <tr>
        <th scope="col"><table width="800" border="0" cellspacing="0" cellpadding="0">
          <tr>
            <th scope="col"><div align="left" class="style1">Copyright 2009 St. Paul of the Cross Parish. All Rights reserved.</div></th>
            <th width="400" scope="col"><div align="right" class="style1">Usage outside our permissions guidelines requires our prior written consent.</div></th>
          </tr>
        </table></th>
      </tr>
    </table></td>
</tr>
</table>
Tnx in advance!

Hi
Can you tell me which version of dreamweaver you are using (and flash pro, if you have it), as the code you provided has element of a number of different versions (e.g. your js flash files are reasonably new, but your flash inserted into the html body is old, but with the cs3 version of flash player indicated!). Also the detect flash file is no longer required.
PZ

Firefox freezes with Flash addon enabled; doesn't freeze with Flash addon disabled.

Running Windows 8, Firefox 18.0.1, plugin Shockwave Flash 11.5.502.146 (current version, according to Firefox plugin check).
Firefox freezes every time when loading a page with Flash content when the Flash plugin is enabled. Firefox does not freeze when the Flash plugin is disabled. Repeatable, tested and confirmed multiple times - freezes consistently with Flash plugin enabled, loads pages perfectly when Flash plugin is disabled (though without Flash content).
When in this frozen state, Firefox is completely unresponsive - displays a blank page, can't type anything, can't click on or move/minimize the window. Must be force-quit via task manager.
Other browsers (e.g. Chrome) do not have this issue with Flash. Have noticed several similar problems reported with Firefox and Flash, but the only solution I have seen offered is to downgrade Flash (and introduce potential security issues). Surely there must be a better option? This is a massive issue for me - Firefox is my preferred browser but I cannot use it while it has this allergic reaction to the Flash plugin.

Downgrading Flash is not a solution. This problem seems to be intractable. It will be the end of Mozilla if they cannot address this issue (or even acknowledge the problem). Firefox needs to play nice with current versions of Flash.

How do I allow Flash Player to communicate with Internet-enabled locations?

Ok, so I'm trying to build a website using Dreamweaver CS6 and I wish to place a flash object in the site (a .swf file).
I go through all the normal ways to do it, whether it be by manually placing it in, or using the Insert > Media > SWF.
Now the main issue with this is the expressInstall.swf script it chucks out.
Whenever I try to preview the webpage in a browser such as Firefox or Chrome, it immediatly decides to stop the flash under the pretense of it being an unsafe operation by trying to communicate with an Internet-enabled location (that location being fpdownload.macromedia.com)
Now, regardless of whether I delete ths parameter or not, the error message always appears, so I believe this is a Flash Player error. I currently have the newest version. Also something I noticed is when I publish preview my flash objects into a flash format, that they open themselves in a html browser rather than a Flash Player program.
So does anyone know how to allow Flash Player to communicate with internet-enabled locations?

Would you mind reposting this question over on the Flash Professional forums? This forum is primarily for end users, the Pro forums will get you in touch with a wider developer audience.
Thanks,
Chris

Videos load slowly or not at all with Flash 10!

Well here we go. I'm working on IE 8 128-bit for Windows XP SP3 32-bit. Flash Player 10.1.102.64.
Two days ago I noticed that video playback on sites like Youtube, Veoh, Magavideo etc the load time was real choppy. A video say two or three minuted longs would take more than 3 min, to buffer and then the video would start, then buffer somemore. Start , stop, repeat. For longer videos the flash player wouldn't buffer at all. Now I just give up on watching videos until this problem is solved. I tried one suggestion that said on the adobe hardware settings disable hardware acceleration. Did that, but didn't fix the problem. I've tried unistalling and reinstalling FP 10.1.102.64 once, but that didn't work.
In my "Currently Loaded Add ons" section Shockwave Flash Object is enabled. Version 10.1.102.64 that is.
The files in my system32/Macromed/Flash/ folder are as followed
A folder with 'Flash Player Trust' it contains a filed name rpconverter.cfg
Flash10l.ocx
a text document with FlashInstall
flashplayer.xpt
FlashUtil10l_ActiveX
FlashUtil10l_ActiveX.dll
genuinst
KB923789
NPSWF32.dll
I just want to watch videos online again. I need help.
I have Avast anti-virus
Malwarebytes Anti-Malware
Smart Defrag
Any help anybody.

Step by step what should my Java script setting be? I don't think any quicktime addons are conflicting with it. The First time I had this problem, I had to simply had to turn off the SmartFilter and all my videos buffered smoothly through. I don't know whats wrong THIS time.
When trying to watch a veoh video on this website a error message is found of the page. I click on the little yellow triangle in the corner.
da is undefined
scripts_27.js
code:0
Line:1
Char:8824
URI:http://www.animeseason.com/js/scripts_27.js

Unable to view flash content with Flash 10,0,22,87 as an Non Admin

We currently have an issue with in our Citrix farm with Windows 2003 Servers (x64, R2, SP1) Where Flash Flash 10,0,22,87 is installed and working fine when logged in as a Domain administrator but will not work as a normal (non administrative user) to confirm I've given a user who it did not work for Domain admin rights and it started working straight away. I'm using (and published within Citrix) the 32bit version on IE for compadibility reasons and have also tired this on a Window 2003 Server (x86 R2 SP1) and am getting the same results so I have to assume the issue is with Flash and not with my setup.
I've tried the following recommendations:
Remove with Adobe Flash removal tool and Reinstalling via website with an Domain admin login using the change user /install command
Remove with Adobe Flash removal tool and Reinstalling via install_flash_player_ax.exe installer with a domain admin account using the change user /install command
Allowing Domain users Modify Premissions (to both the Directories and Files) to the M:\WINDOWS\system32\Macromed\Flash\swflash.ocx & M:\WINDOWS\SysWOW64\Macromed\Flash\Flash10b.ocx
Following KB article http://kb2.adobe.com/cps/624/624850b5.html and applying the premission changes recommended
Following KB article http://kb2.adobe.com/cps/191/tn_19148.html and checking the registry premissions on these items
I've enabled all ActiveX and Java related IE options in Group Policy to allow the to run for the Internet Zone
When going to http://www.adobe.com/software/flash/about/ either as a Domain admin or a Regular user it confirms that "You have version 10,0,22,87 installed"
Still I cant seem to get flash components of websites to load when logged in as a non Administrative User.

this is what fixed the issuefor me:
Be sure to try this on a test machine and back it up if needed.
In the system registry
For each of the following registry keys:
HKEY_CLASSES_ROOT\CLSID\{D27CDB6E-AE6D-11cf-96B8-444553540000}
HKEY_CLASSES_ROOT\CLSID\{D27CDB70-AE6D-11cf-96B8-444553540000}
HKEY_CLASSES_ROOT\CLSID\{1171A62F-05D2-11D1-83FC-00A0C9089C5A}
HKEY_CLASSES_ROOT\TypeLib\{D27CDB6B-AE6D-11CF-96B8-444553540000}
Right-click the key, select "Permissions"
In the Permissions Dialog click the "Advanced" button Click "Add"
Enter "Everyone" and click "OK" to accept Select "Allow" for the "Query Value", "Enumerate Subkeys", "Notify" and "Read Control" permissions. Do not change any existing permissions.
Source - http://www.adobe.com/go/624850b5

Click to play doesn't work with flash

I've "click to play" for plugins enabled (plugins.click_to_play is set to true in about:config) in Firefox (v16.0.1) and it works with all plugins (as far as I can tell) except with flash. Every time I enter a site with flash, like Youtube for example, the "lego" icon doesn't show up and it starts playing the videos automatically.
I've tried enabling and disabling the plugin, and reseted firefox but it didn't worked.
I would appreciate any help on solving this issue.

Click to play is a very experimental feature, and shouldn't be used unless you are a developer working on the feature. You should immediately disable click to play until it is fully developed.

Ongoing problems with Flash in Firefox 8

I am still having problems with Flash player since upgrading to Firfox 8 - see previous posts.
Symptoms:
When I try to access any flash containing page, the flash content does not load or play - the area it should be is blank or shrunk out - not even a token jpeg.
What I have tried:
Checked Flash is installed and enabled and up to date - all OK.
Tried re-installing Flash anyway - no effect.
Tried uninstalling flash and re-installing - this fixes the problem temporarily, but as soon as I shut down and restart, the problem returns.
Tried disabling other add ons - makes no difference. Only addon in this area is Freecorder toolbar.
Tried updating settings in Windows Firewall to ensure Firefox is allowed - no change.
Ensured my anti-virus/spyware program (PC Tools Anti-virus) is not blocking any of the websites - nothing there.
Checked situation in IE (Yuck!) - works fine there.

No response to this, and problem has not gone away. Looks like I am going to have to change browser....

How do I stop Flash enabling my web-camera ? I've tried Flash settings.

I want my web-camera to be enabled but only on appropriiate sites (such as Second Life) or in appropriate apps such as Skype but Flash keeps enabling the camera even when I go to YouTube.
I have tried their online settings options to fix the problem but it doesn't stop the camera becoming enabled by say YouTube even though I set the options to "always ask".
How can I fix this ?

Yes, I deleted all the websites and reset everything to "ask" except p2p which I turned off.
Whenever I first go to any page with flash content (from reboot) my webcam becomes powered - note I don't mean that it is actually recording but of course there's no way you can tell that when the light comes on.
This phenomenon only started with the current flash update.

Konqueror segfault

Anyone else get a konqueror segfault browsing http://tvnz.co.nz?
I'm current with the repositories...
Dale

Works fine now for me too.
I suppose it was problem caused by a particular piece of content which has now disappeared from the site.
Last edited by dale77 (2007-03-03 07:06:47)

Successfully using a Native Extension with Flash CS5.5 Pro, having issues

Hey all,
I'm trying to use a native extension due to an app rejection about the new storage guidelines. I'm hoping someone can help me figure out how to use a native extension from Flash CS5.5 and the adt command line utility (I've never used before).
Apples storage guidelines in 5.0.1 require files saved to Documents (and other places) to be marked with the icloud "do not back up" bit. I'm trying to use Adobe's IOS 5.0.1 data storage native extension to do that as I have file sharing enabled and my app downloads files I want the user to be able to copy to their desktop.
From the bits and fragments I'm reading all over, getting it to compile means using the command line adt tool (I've never used it before) because Flash Pro CS5.5 doesn't support native extensions. Also, this native extension requires a v14 SWF published (11.1) and CS5.5 only goes up to 10.2 (or higher if you install the players).
I edited the AiriPhone.xml file and pointed it to an AIR 3.1 airglobal.swc and I have AIR 3.1 overlayed in flash. I can't test AIR for iOS anymore after that change but I can get it to compile a SWF. The adt command line adt utility stopped complaining that my SWF version was 13 when it needed 14, so I assume this worked?
I am trying to compile a debug version so I can see trace statements to see if the native extension reports success on changing the bit. Here is my command line cobbled together from scraps of info on adobe.com and the -help data:
adt -package -target ipa-debug -connect 192.168.1.80 -provisioning-profile myApp.mobileprovision -storetype pkcs12 -keystore myApp.p12 myApp.ipa myApp-app.xml myApp.swf dat AppIconsForPublish Default-Landscape.png Default-LandscapeRight.png -extdir extensionDir
Before this iCloud change this app published directly from Flash Pro CS5.5 without any issues. I am only running into issues getting this app to work with this native extension and/or published correctly.
I am including the folders "dat" and "AppIconsForPublish" as well as splash screens (this app is landscape-only) as well as that extension in the folder extensionDir.
After putting in my password my app compiles into an IPA which I can drop into iTunes. It has the same general size as the IPA generated from Flash Pro. The icon is correct, etc.
When I sync this file, the progress bar goes across, I see it loading on my iPad and then once it goes to install I get a popup saying "iTunes Sync: 'myApp' failed to install."
Is there anything obvious wrong with my adt line? Has anyone else used this native extension? Ideas on what I can do to fix this?
No, unfortunately I did not build this with Flash Builder. I am an avid user of it now and this would be a moot point as it uses ANEs and changes SWF versions trivially. I have to get this to compile using Flash Pro CS5.5 though.
Any help is greatly appreciated!
edit:
Just FWIW, after I updated the .xml to use the latest AIR and such (so the version is 14) I removed the extension, exported purely from Flash Pro CS5.5 and the app works fine. As soon as I enable the <extension> in the XML I can no longer install the app. This just appears to be a noob adt publish issue.

My app downloads PDFs, movies and other information-esque files and saves them to the apps Documents folder so they can be retrieved via file sharing. These files not being in something purgable like /Library/Caches and not having the "do not back up" bit is why I was rejected.
update: It's definitely my command line building.. I took out the native extension completely and published from flash to an IPA and it works. I then run adt on the same SWF that just worked and it fails to install. So the install failing is my command line. I see this article and my command line is very similar. I'm really uncertain why it's failing.

Webcams Not Working With Flash

I'm using Windows 8 64 bit, have tried on both chrome and firefox, flash version 11.8.
I'm trying to broadcast my webcam and audio in flash chat rooms. When I'm prompted to choose my video and audio sources the options show up but they can not be utilized properly. There isn't an issue with my webcams or mics because they work fine when streamed through encoders or used on Skype. The problem is specifically with flash chat rooms. I've uninstalled and reinstalled flash as a program, disabled and enabled as a plugin/add on, deleted the cache. I'm completely stumped on what the problem is please help I need to get this fixed ASAP.

Hi Alejandro,
Things to check:
1. Do you have the "Select" event coming form the table to display further info?
2. Does it work with Web Dynpro?
Did you know that if the compiler option is portal and on deployment you would see 2 deployed versions 1. HTML and the 2. Flex?
Let me know.
Good luck,
Dharmi

Konqueror segfaults with flash enabled

Similar Messages

Maybe you are looking for