Konsole doesn't view well when I zoom the window of konsole
I'm using KDE 4.8.4.Konsole can maximize / restore well.But it doesn't zoom well.When I zoom the window,konsole cannot view well.Sometimes it is white,or transparent.
But when I change the window decorations of kwin to others like qtcurve.It works well.When the window decorations is Oxygen.It doesn't work well.
I'm using catalyst,konsole 2.8.4.What should I do?Why does it happen?
Sorry,I can't use English well.
Sorry for my late update:
cor-el, thanks for your suggestions, I've just tried with safe mode(by starting FF with "shift" held down), but things still don't work well. However, I did get some findings:
* In either Safe or normal mode, when only 1 window of multiple tabs: if close window via "X" or "File"->"Exit", then no prompt.
* In either Safe or normal mode, when 2 windows of multiple tabs:
* * If close either window via "X", then it shows prompt :-)
* * If close either window via "File"->"Exit", still no prompt.
In all, 2 FF windows seem to work well for "X" button.
I didn't try w/ more windows open, maybe same as 2 windows I guess.
jscher2000, thanks for your sharing, too. It reminded me that the 2 closing methods are really different.
Guys, looking fwd to more of your expertise sharing!
Similar Messages
-
My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
HELP PLEASE
Very worried!!Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo). -
I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesn't wor at all. Is there any solution for this problem?
Hi!
I restarted the computer, but the same issue happens again. When I move my mouse over some object or tool, it doesn’t come active at all (only some of the tools works) When I try to change “site properties”, I can’t choose tablet or phone mode or even I can’t select the checkboxes, only thing what I can do is change the numbers (high and width) . After all the main problem is that I can’t select some of the items or functions by mouse, but only by the keyboard. -
I am running Win. 8.1 and had no issues with FF 24. Since upgrading to FF 25, firefox will appear closed when i close the window but the process doesn't shutdown. I have to go into Task Manager to end the process. I can then launch it again.
SOLUTION (possible).
Hi all. I had this problem as well. I currently run FF26. A week or so ago, out of nowhere FF wouldn't exit - the window would close but firefox.exe process would keep running in the background using about 50% of CPU. Not sure if it's connected, but just prior to that I clicked on a link on Facebook that looked like spam website, nothing happened, site loaded (sort of, all I saw was a msg - Please Wait...) but nothing happened, I have Eset antivirus and it monitors network traffic and files for viruses, so maybe it prevented my PC getting infected...
So, I had this problem for a few days, was searching the net for solutions, but nothing seem to help. Then, just out of luck I did something that WORKED!
Here's what I did. I noticed that svchost.exe was using a lot of CPU alongside with FF. I ran ProcessExplorer to see what might be connected to this process, the list was long and I didn't have any idea where to start, so what I did was - Right click on svchost process, choose Debug and dismiss the warning. In a few seconds svchost process quit and after that FF started closing properly.
I had to re-enable all my plugins and themes I disabled prior, I also lost my history and preferences which I trashed in the process of searching for solution. But heck, it worked, hopefully for good. Now if someone could point out the real cause of this and fix it for everyone - that would be great. Cheers! -
How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP? I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.
The new serial number is to the right of your chosen download.
-
The download function is not working....!! I don't use any add-ons like idm or dap,etc.... When I click on something like download a doc,pdf or any such file, the firefox just doesn't respond, and when I checked the download, i.e. cntrl+j, I don't find anything in the downloads... I am currently using Firefox 7.0.1....... Nothing is being downloaded, and I am forced to use IE8 for everything... I even tried re-installing, but doesn't help... I am using Windows 7
TonyE is correct the plugin version comes with Adobe's Reader X.
The failure in communication is two parted:
1. Reader X is not Acrobat (Mozilla Plugin Checker)
2. Acrobat is not mentioned in the Reader X download Page (Adobe)
therefore confused clients.
For readers '''CAUTION''' check the minimum requirements for Reader X.
Here: [http://www.adobe.com/products/reader/tech-specs.html Adobe's Reader X requirements link]
Do not waste the time to download (80+MB and Site is Slow) if your machine does not have the resources to execute it. ie. '''aging''' Hardware
Unfortunately the Adobe DLM only checks the requirements after it has
downloaded BEFORE the install occurs.
This is '''very expensive''' for both the sender and receiver
It might be why they called it READER X and READER 9 will not sense an update...
Another Software company pushing Hardware antiquity... -
TS1713 The LED on the adapter connector doesn't light up when attached to the computer
the led on the adapter connector doesn't light up when attached to the mac book pro and even not charging . I have 2 years warranty so kindly resolve my problem. and reply me soon as possible. Thank you
You'd better bring it to Apple Store's Genius Bar.
-
AX light is yellow and does not flash and doesn't change even when I press the "reset". Tried unplugging and reset -- still a solid yellow. I assume this is a goner?
Unfortunately, based on your description, I would have to second that your Express is a "goner." However, before giving up on the unit, be sure that you attempt a "factory default" reset at least 3x just to be sure.
-
Why doesn't anything happen when I hit the download button for Mavericks OS X? I have a MacBook Late 2009 with Lion 10.7.5.
Down load fron the Internet OmniDiskSweeper (free) and open it. It will show you all of your files and the respective sizes.
In addition, click on your HDD icon in the upper right hand corner of your desk top with COMMAND I (I as in the letter i). What does it say about the space used and available.
You may be experiencing this phenomenon:
http://pondini.org/TM/30.html
Ciao. -
Just published a new site to an FTP server and I got a 404 error message saying the site doesn't exist. When I retype the name of the site, I get a page from my hosting service saying this is the future home of [my site]. Any ideas?
Hi roddy,
thanks for responding. I read your link, looked at my settings and they were all correct. I tried to do a republish and got this message: The requested URL /childrenandcaring/index.html was not found on this server.
When I type the address in the address bar, I go to the site and the page says: This is the new site childrenandcaring.com
Any other ideas?
Suzanne -
Institution Provider Page works well when I click the "Preview in iTunes" but not in "Preview on iPad". What seems to be the problem?
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
See also http://kb.mozillazine.org/Error_loading_websites (Error_loading_some_websites) -
Lately in Acrobat Pro Ver 9 for Win 7 the menu bar (File, Edit, View, Document etc) disappears when I move the window . . only happens when I have a pdf file open . . everything worked fine until a few days ago . . F9 fixes the problem until I move the window again . . I realize my version is old so I tried tried downloading XI reader and having the same issue . . any help would be appreciated
Hi Ernestprinter,
Check if you have multiple Java versions installed on your computer.
Try clean boot http://support.microsoft.com/kb/929135
Also i would suggest uninstall security software and install it back.
Currently you may use F9 key to restore Menu bar.
Regards,
Ajlan Huda. -
Weight Watchers Web SiteFood Tracking Page is incomplete when I maximize the window.
I use Weight Watchers e-tools. I have been accessing it using Firefox since January 2011. Within the last month, when I open the Food Tracker window from the home page, it is minimized. When I maximize the window, I cannot see all of the tracking page. The right side is cut off. I now have to use internet explorer to access this page.
Reset the page zoom on pages that cause problems, make sure that the window is not maximized:
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
Flash quits when you close the window
Why does Flash CS5 quit when you close the window you were working in? It has to restart every time you close and open a file.
This doesn't seem to be a crashing issue. The program seems to be designed like Windows, wherein the application quits when you close the last open window. This is incredibly annoying and completely unacceptable.
-
Creative cloud installed on the desktop, but when I start the window is white and does not work
can someone help me?
Thank god be with
2014-08-25 15:14 GMT-03:00 Sheena Kaul <[email protected]>:
Creative cloud installed on the desktop, but when I start the window
is white and does not work created by Sheena Kaul
<https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View
the full discussion <https://forums.adobe.com/message/6672088#6672088>
Maybe you are looking for
-
We are working on Desktop Intelligence 6.5 We have a report in which we have two Data providers(DP). DP1 A B C D Where B=u2019xu2019 AND D=u2019zu2019 DP2 F G H Where F in list DP1.A On ref
-
Capturing HD in final cut express
A few capture questions: 1. Is there a way to capture HD material in final cut express? 2. If I'm sending HD material through a digital converter, and then to the computer, will that digital computer all the file to be transfered in HD? thank you.
-
AdWords connecting to fraud sites are appearing in articles opened in FireFox. Can this be fixed?
Hi Guys In the last two days I have experienced a hijacking of my browser. I have opened a web page and there have been embedded links to "unauthorised advertising" on the pages. Worse, sometimes the links are hidden. I fell victim to one of the hidd
-
So my computer has been having a problem for the past month, which involves my Nvidia graphics card. The card is the 8600 M model for laptop computers. The problem can be described as this, increased and unchangeable resolution, color problems on the
-
I have iphoto 7, deleted my photos (now iphoto has grey boxes where images were). I've backed up on Iomega, and I can see the iphoto library there. But how do I get it back on iphoto? I dragged it into my hard drive, but iphoto still shows grey bo