KONV not getting updated with new condition type value

Hi,
I have created a new condition type for a pricing procedure. But table KONV-KAWRT is not getting updated with any value. Can anyone help me this.
Thanks
Shweta

Hi Vasu,
It was created in the same way then I have assigned calculation formula . For invoice it is comming fine but for the intercompany billing it is not showing any value in Contition tab for this particular condition type. For this when I checked in KNOV table it is showing condition type but the value (KONV_KAWART) is comming out zero and due to this reason it is not showing value in intercompany billing ->condition. Do I need to write code for this?
Thanks,
Shweta

Similar Messages

  • Open PO did not get updated with new price.

    A mass price change was updated in SAP for one of the supplier . All open orders did not get updated with this new prices.
    Can anyone tell me the reason why ?
    -Amol

    hi
    i think u have to do it manually
    logically if u see u can use diffrent prices in diff po
    if ur price is inr 100 in 1st po and u done gr ur rice will get updated in mm suppose it is 105
    next time u create the po of 110 rs  and done gr
    suppose ur price updated is 108 rs inmm
    so it is not happening that 108 is get updated in ur 1st po
    right so i think u have to update pos manually
    if i am wrong plz let me know
    regards
    kunal

  • KINAK field in Table KONV not getting updated with value W

    Hi,
    I have a PO where I am deleting a line item.
    After I delet line item the field KINAK in table KONV gets updated with value W.
    But I am getting instance where in some cases the field KINAK is not getting updated.
    The result is deleted line item is getting populated in PO output also.
    Regards
    Nandiini

    KINAK is updated only when a Condition is inactive ! So when a item is deleted the condition becomes inactive and gets updated with 'W' which means statistical(not to be counted)
    A     Condition exclusion item
    K     Inactive due to calculation basis/shipping material type
    L     Condition exclusion header or inactive at header level
    M     Inactive due to manual entry
    T     Inactive at header level
    W     The document item is statistical
    X     Inactive via formulae of incorrect
    X     Inactive via formulae of incorrect
    Y     Inactive because of subsequent price

  • GenIL Model Attribute Structure not getting updated with new fields added

    Hi All,
    I have modelled the service interface using GenIL Modelling in Duet Enterprise 1.0. Later, I added some fields to the read operation in the Enterprise Services Builder in the ESR system.
    But in the Read Operation mapper method "/IWFND/IF_SRD_BOP_MAP_GET_OBJ~MAP_POST_GET_OBJECTS",  when I try to define an object of type GenIL model Attribute Structure (ZMDLZPRGET_DETAIL),  Iam unable to access the newly added fields in the read operation.
    In transaction " GENIL_MODEL_EDITOR ", under Root Objects, when I open the Attribute Structure name, only the old fields are available, newly added fields are not updated.
    But I was able to see the newly added fields in the READ OPERATION data types of Enterprise Services Browser in SE80.
    Please help me how to update the new fields for GenIL Model Attribute Structure(ZMDLZPRGET_DETAIL).
    Thanks,
    Kris

    Hi sap_wiz,
    Thanks for your reply.
    My problem solved,
    Thanks
    Kris

  • Excise table J_1IEXCDTL not getting updated with Excise Base value.

    Hi All,
    The the field EXBAS of table J_1IEXCDTL is not getting updated for ETT (Transaction Type) DLFC.
    For other transaction types, the same is getting populated.
    Is there a setting for controlling the same?
    If yes, can you please guide me.
    Best Regards
    Debaditya Ghosh

    First you should ensure that it is flowing in your billing document.  If so, automatically, it will also flow in your excise invoice and the field EXBAS will be updated accordingly.
    From your comments, it seems, the amount is not flowing in your billing document and excise invoice.  If so, ensure that you have assigned  the correct tax code in FV11 for your ED condition type.
    thanks
    G. Lakshmipathi

  • Dispute case does not get updated with subsequent partial payment

    Hi Experts
    I am now still testing the Dispute management .. but it's my first time to see that some times created dispute case does not get updated with the payment posted against the invoice which the dispute case has been raised .. when i trying to add open item to the current dispute case i face this Error..
    Process step 004: Change not possible, process step 003 missing
    Message no. UDM_MSG037
    Diagnosis
    The dispute case is to be changed by process step 004 from accounting. However, there is at least one process (for example, clearing transaction from payment or credit memo) that was performed before the current step and that has not yet updated the dispute case. The changes to the dispute case must be carried out in the correct order.
    System Response
    The dispute case could not be changed.
    Procedure
    In an asynchronous change to dispute cases using IDoc, make sure that all IDocs of the previous process have been posted. Then you can carry out the required action (for example, post the current IDoc from process step 004 or include further items). The immediate previous process step is 003.
    Your kind feed back is highly appreciated..
    Regards
    Mahmoud EL Nady

    Hi
    Thanks for straight forward solutions its now working properly after run the program.. thanks too much..
    also do i need to run this program periodically or once i notice that one dispute case it not getting updated?
    Regards
    Mahmoud El Nady

  • Issue with new Condition type..

    Hi,
    I want to create a Condition Type for VAT %, where we can insert value like...
    5% on 60% of Basic Price OR
    3% on 70% of Basic Price OR
    1% on 80% of Basic Price
    Note: - We have try with New Tax code and it's working... But through it, we require mew Tax code as per change condition..
    That's why we require a Condition Type for variable %...
    Please guide...

    Hi,
    You can do this through two ways.
    Option 1
    Add new condition type in tax procedure and  Make access sequence say with doc type and tax code.
    So for old PO's make the variable condition as 100% and for the new ones you need to create that many tax codes.
    Option 2:
    Write a routine for alternate base that is to be attached in tax procedure. Make a condition type in MM pricing procedure that is statistical and calculates value on base price.  Read this base price in the routine. So with this you will not make that many tax codes.
    Regards
    Sangeeta

  • MessageDriven Beans not getting called with new messages

    I have a system in which data is collected by a number of applications and sent as messages to JMS topics. I also have message-driven beans hosted on weblogic that receive these messages and convert some of the data into entity beans for storage in the database. The problem I have is that occasionally some of the message-driven beans will stop processing messages, which will lead to messages 'backing up'. If left unchecked, the messages start to consume a lot of memory, so I have put message quotas in place to limiit this growth, but the fundamental problem is that the messages are not getting processed. I considered that the MDBs that stop working may be hung up on something internal or are hung up in the database (Oracle 10), but the DB enterprise manager says that there are no blocked sessions, and the monitor data for MDBs says that there are no active objects.
    What is happening here? I am using the monitor pages for the Weblogic console, so from that I can see that messages have not been processed, and that there are no MDBs currently processing messages, but there doesn't seem to be enough clues to pin down what is happening. Where should I be looking?

    Tom:
    Thanks for the very quick reply. I have looked in the logs, and only see error messages when the message quotas are reached. I have looked at the transaction statistics in the monitor console, and it gives zero rollbacks and timeouts. However, I have not tried a thread dump, and will try that when I get into work tomorrow.
    Here are some answers to your questions:
    * What is your version and service-pack? (I recall that there were one or two long since fixed bugs that could cause stalls.)
    I believe my version is 9.22.
    * Are the problem topics running on the same weblogic server as the MDB?
    Yes
    * Are subscriptions durable?
    No
    * Are you using "distributed topics"?
    I think so; the applications that are sending the messages are on processors other than the weblogic server. Is that what you mean by distributed topic?
    * You write that you are using multiple MDBs but only some stall. Is it the same ones each time?
    Not sure. We want to make sure that we get all the diagnostic information we can before restarting the server because we're not sure if this problem will happen again within 5 minutes, or if it will run weeks. It had run stints of a couple weeks before this point without having this problem.

  • ADF Struts : Form not getting refreshed with new values

    I have a view object based ona entity object. It has an additional attribute(calculated attribute) selected from some other table. In my browse page, I click on edit button and change the calculated attribute in the edit page and comeback to the browse page. In the browse page, the changed calculated attribute is not getting reflected. however the database has the changed value. Now, if I query the same browse page in a different browser window, it shows the changed value. But, still the original browser window shows the unchanged value only(even after refreshing the browser). So, this is server caching. Why is the application module not refreshing the bindings? What should be done to achieve the bindings refresh?

    Did you look at:
    http://radio.weblogs.com/0118231/stories/2005/06/16/whyIsntRefreshingTheBrowserPageEnoughToRefreshTheDataDisplayed.html

  • Screen Fields Not getting Updated with DYNP_VALUES_UPDATE

    Hi All,
    I am using FM DYNP_VALUES_READ to read the screen field values and then modifying those values and passing the modified table to DYNP_VALUES_UPDATE. But the problem is screen fields are not populated with these values . The values I wish to populate are footer values . I am using OO ALV for this wherein I am handling an event for filter of records and accordingly I need to modify my footer. Any Suggestions??
    *&      Form  footer
          Caslculate Total items, number of hits/Miss and percent MSP
    -->  p1        text
    <--  p2        text
    FORM footer .
      CLEAR : io_totitems,
              io_tothit,
              io_totmiss,
              io_permiss.
    IF NOT l_flag EQ 1.
    Get total items
      DESCRIBE TABLE i_outdata LINES io_totitems.
      LOOP AT i_outdata INTO wa_outdata.
      calculate number of hits
        IF wa_outdata-hit_miss  = 'HIT'.
          io_tothit = io_tothit + 1.
        ENDIF.
      calculate number of Miss
        IF wa_outdata-hit_miss  = 'MISS'.
          io_totmiss = io_totmiss + 1.
        ENDIF.
        CLEAR wa_outdata.
      ENDLOOP.
    calculate percent MSP
      io_permiss = ( ( io_totitems - io_totmiss ) / io_totitems ) * 100 .
      IF l_flag EQ 1.
        wa_dynpread-fieldname = 'IO_TOTITEMS'.
        APPEND wa_dynpread TO t_dynpread.
        wa_dynpread-fieldname = 'IO_TOTHIT'.
        APPEND wa_dynpread TO t_dynpread.
        wa_dynpread-fieldname = 'IO_TOTMISS'.
        APPEND wa_dynpread TO t_dynpread.
        wa_dynpread-fieldname = 'IO_PERMISS'.
        APPEND wa_dynpread TO t_dynpread.
        CLEAR wa_dynpread.
        d020s-prog = sy-repid.
        d020s-dnum = sy-dynnr.
        CALL FUNCTION 'DYNP_VALUES_READ'
                EXPORTING
                   dyname               = d020s-prog
                   dynumb               = d020s-dnum
                   translate_to_upper   = 'X'
              REQUEST              = ' '
                TABLES
                   dynpfields           = t_dynpread.
        MOVE io_totitems TO io_totitem.
        CONDENSE io_totitem NO-GAPS.
        MOVE io_tothit TO io_tothits.
        CONDENSE io_tothits NO-GAPS.
        MOVE io_totmiss TO io_totmis.
        CONDENSE io_totmis NO-GAPS.
        MOVE io_permiss TO io_permis.
        CONDENSE io_permis NO-GAPS.
        LOOP AT t_dynpread INTO wa_dynpread.
          CASE: wa_dynpread-fieldname.
            WHEN 'IO_TOTITEMS'.
              wa_dynpread-fieldvalue = io_totitem .
              MODIFY t_dynpread FROM wa_dynpread.
            WHEN 'IO_TOTHIT'.
              wa_dynpread-fieldvalue = io_tothits.
              MODIFY t_dynpread FROM wa_dynpread.
            WHEN 'IO_TOTMISS'.
              wa_dynpread-fieldvalue = io_totmis.
              MODIFY t_dynpread FROM wa_dynpread.
            WHEN 'IO_PERMISS'.
              wa_dynpread-fieldvalue =  io_permis .
              MODIFY t_dynpread FROM wa_dynpread.
          ENDCASE.
          CLEAR wa_dynpread.
        ENDLOOP.
        CALL FUNCTION 'DYNP_VALUES_UPDATE'
          EXPORTING
            dyname               = d020s-prog
            dynumb               = d020s-dnum
          TABLES
            dynpfields           = t_dynpread
          EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield  = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription  = 6
            undefind_error       = 7
            OTHERS               = 8.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDIF.
    Get all fotter details in a internal table
    this is used to download footer in Excel
      wa_footer-fldname = 'Total Items '.
      wa_footer-value = io_totitems.
      APPEND wa_footer TO i_footer.
      wa_footer-fldname = 'Number of HIT'.
      wa_footer-value = io_tothit.
      APPEND wa_footer TO i_footer.
      wa_footer-fldname = 'Number of MISS'.
      wa_footer-value = io_totmiss.
      APPEND wa_footer TO i_footer.
      wa_footer-fldname = 'Percentage MISS '.
      wa_footer-value = io_permiss.
      APPEND wa_footer TO i_footer.
      CLEAR wa_footer.
    ENDFORM.                    " footer

    data: t_dynfields1 type table of dynpread with header line.
    CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
    dyname = d020s-prog
    dynumb = d020s-dnum
    translate_to_upper = 'X'
    REQUEST = ' '
    TABLES
    dynpfields =  t_dynfields1.
    <b>read table t_dynfields1 index 1</b> “ I hope this is missing
    I will be selecting from a list .
    Because once the value is read we need to update the screen field with that value .
    Here the selected value will be in the first place
    Now
    Your operation is to populate the fields with some variables .
    In the same when I do this there is only one value then
    Im expecting only one entry here …
    LOOP AT t_dynpread INTO wa_dynpread.
    CASE: wa_dynpread-fieldname.
    WHEN 'IO_TOTITEMS'.
    wa_dynpread-fieldvalue = io_totitem .
    MODIFY t_dynpread FROM wa_dynpread.
    WHEN 'IO_TOTHIT'.
    wa_dynpread-fieldvalue = io_tothits.
    MODIFY t_dynpread FROM wa_dynpread.
    WHEN 'IO_TOTMISS'.
    wa_dynpread-fieldvalue = io_totmis.
    MODIFY t_dynpread FROM wa_dynpread.
    WHEN 'IO_PERMISS'.
    wa_dynpread-fieldvalue = io_permis .
    MODIFY t_dynpread FROM wa_dynpread.
    ENDCASE.
    CLEAR wa_dynpread.
    ENDLOOP. */
    Comment this for a while and
    Change the code as
    t_dynfields1-fieldname = ' '. "<--- header name
    t_dynfields1-fieldvalue = ' '."<----val  
    append t_dynfields1.
    t_dynfields1-fieldname = ' '.
    t_dynfields1-fieldvalue = ' '.
    append t_dynfields1.
    t_dynfields1-fieldname = ' '.
    t_dynfields1-fieldvalue = ' '.
    append t_dynfields1.
    And check .
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
    dyname = d020s-prog
    dynumb = d020s-dnum
    TABLES
    dynpfields = t_dynfields1.
    regards,
    vijay

  • EKPO table not getting updated with PR numbers

    Hi All,
    PR and PO is created in APO and then transferred to R/3 system. For all these POs, we can see the PR number in the PO display(ME23n) but when we see in the EKPO table the PR number is missing.
    Any pointers as to why this is happenning? whether any SAP notes needs to be implemented?how we can make that PR is updated in EKPO table also?
    Any feed abck will be highly appreciated.

    Hi,
    The problem with having the EKPO hold the requisition number is that you then only have the ability to store ONE PR number.
    By storing them on the delivery schedule lines you have the ability to have as many as you like and so you should be looking for these on the delivery schedule lines on the PO item and not on the item itself.
    Steve B

  • Stock not getting update

    hi,
    i have done sub-contract process, in which after completion of MIGO (101 - 543 mvt), document had posted.
    however in MMBE there is no stock. 
    MC.9 - stock is available
    reg
    mrs

    hi
    If you are ordering material for stock than only stock will be updated after goods receipt.
    But if you are purchasing material with item category K, i.e. cost center, than u r ordering material directly for consumption. so it will not be updated in your stock. it will be shown as consumed by cost center K, as soon as you do goods receipt for the same.
    This is why , your stock is not getting updated with PO with cost center item category.
    you can also check in other way
    Goto OMJJ and give the reuiqred movement types and check the VALUR and QUANITY UPDATE should be checked
    Also you can check in OMS2 the VALUE and QUANITY update is checkd or not for MATERIAL TYPE
    Regards

  • GLPCA table not getting updated correctly for VBUND

    Hi All,
    I have come across one issue that the value of trading partner field (VBUND) in table GLPCA are not getting updated correctly for document type KP.
    In vendor master this field has different value versus it is showing in GLPCA-VBUND.
    Does any one knows about ?
    Thanks for your help on it.
    Regards,
    Manoj

    Hi Sridhar,
    Thanks for your response on it.
    This note is not applicable for our system as we are working on 4.0B with support pack 52.
    Also we are getting this worng update of this field (GLPCA-VBUND) while doing MR11 creating document with doc. type KP. This value is not picking from vendor master (LAF1-VBUND) and randamly picking any value. Not sure from where ?
    Please advise your thought.
    Thanks,
    Manoj

  • MM Pricing Condition Type values in Condition Tab updation while CHANGE PO.

    Hi,
    The process of PO creation and PO change is through inbound IDOC posting.
    I created a PO with configured MM pricing procedure.
    While creating PO, the PO is created as required with different Condition Type value break-ups [PBXX, Discount, Surcharge etc] in the PO as required via Inbound IDOC processing.
    While CHANGING the same PO, the Condition Type break-ups [i.e. pricing related values] in the PO are NOT changing in the PO via Inbound IDOC processing.
    What needs to be done to update the Condition Type break-ups in the PO while changing PO through IDOC processing process?
    This problem is not occured while manual / on-line changing of PO valueS and saving the PO & exists through IDOC processing method ONLY.
    Thanks in Adv,
    RK

    Hi
    Try this function module
    FM RV_CHECK_CONDITION_VALUE
    Regards
    Hareesh Menon

  • Backend document number not getting updated

    Hi ,
    Shopping cart is not getting updated with backend document number in follow on document section
    I am getting graphic display but no backned doc number
    I am on EBP 5.0
    Has anybody come acroos such issue any solution?
    Thanks in advance
    Diwakar

    HI Diwakar,
    Check in table BBP_DOCUMENT_TAB if any follown on document available wrt to SC...
    also you can do one thing...open SC in BBP_PD transaction...select line item & check for  Follow-On Document Object ID in Backend in table BBP_PDBEI...
    also meka esute that this document is created  in R/3..if follow on document is available in R/3 then it's a problem with BBP_GET_STATUS_2..
    Let me know ur findings..
    BR
    Bharat M

Maybe you are looking for

  • Restore VHDX file on Windows server 2012

    I took back of my windows 2012 physical server and the file it created is in VHDX format. I have the backup file copied to another location. Now i completely wiped off the array on this server, re-created the arrays in the same form like before. Now

  • How to move an App from one mac to DPS App builder on another mac

    When I try to download the Developer app, after adding new UDIDs to the provisioning certificate, I get an error stating the app was built on a different machine. Everything works great when completed from the original Mac that I did the build on. (t

  • Pse 7 not responding

    I have PSE 7 and as of 2 days ago it has completely stopped working. When i open the organizer it freezes and when you try to click on anything it says the program is not responding. I ve rebooted etc and nothing works. If i pull up the editor it wor

  • How to use JDBC RowSet ?

    Dear all, I downloaded Jdbc Rowset and configured it in my PC. But when I use CathedRowSet,it give me the following errors. Exception in thread "main" java.lang.UnsupportedClassVersionError: javax/sql/Row Set (Unsupported major.minor version 48.0)...

  • Having problemn in sending a report email through forms

    Hi ALL, I am trying to send an email a report through forms It works for me in client side I am just passing parameters and working fine in Client side I am using forms 6i,reports6i and Oracle 8i If i run the same form in web it is not doing anything