KOrganizer 4.7.0: bugs, bugs and more bugs?

Happy Sunday to everyone! :-)
I'm quite disappointed by all the problems I'm having with KOrganizer (the most recent release, 4.7.0), one of the programs I use more extensively.
There's many things not working so I'd like to share all of this with you, hoping to fix it all or submitting as a bug.
The first thing I've noticed is that it's impossible to keep two calendars synchronized between two different computers: for many years I've used a script which, with a simple rysnc, was able to sync the file "std.ics", containing all the events of a single KDE calendar.
Now, instead, if I try to do this, I see that nothing changes on the destination computer, so I have to remove the calendar manually and import the iCal file.
All of this, though, is not enough, because, every time I import a new calendar into KOrganizer, a kdeinit error occurs, so I have to logout and start a KDE session back again.
Ok, you might say, is that all?
No, because, if I try to list all the events belonging to a specific period, that is all the times I went playing tennis between April 1st and April 30th, I cannot list the events in a chronological order, which makes the output appearing on the screen a little messy.
Can you confirm these problems so that I can submit them as bugs?
Thanks to all in advance,
Burroughs.

Hello,
Please use dcdiag command to check if all DC run normally.
Please use repadmin /showrepl command to verify DC replication status.
Please check if there is any related error in application log.
Cara Chen
TechNet Community Support

Similar Messages

Keynote 3 CHARTS DONT WORK BUGS BUGS AND MORE BUGS

X-Y chart: 1. CANNOT select symbols. SAME symbols, but different colors, goes to different series automatically. Change it, the changed symbol goes to all.
2. CANNOT SELECT UNITS of X and Y axes Separately.
3. Apparently this is because the x- and y - control combo buttons cannot be selected independently. They both turn on.
Interestingly, the first time Keynote 3 plots the series, each series has a different symbol. Try to edit the chart, and all series come back with a single symbol!

You can give feedback directly to the Apple folks if you like. (We're a user-to-user community, so we don't have any control over the bug-fixing process, and there's no guarantee that the relevant Apple folks will see this topic.) Here's a link to the iTunes product feedback form:
http://www.apple.com/feedback/itunesapp.html

Cap6- Bugs, bugs and more bugs!

I downloaded Cap6 trial version yesterday to test their claim that it works with the SumTotal LMS and that it was thoroughly tested. After converting a project I built in Cap 5.5 to v 6 and loading it to the LMS, and testing for over 10 hours, the following items were occuring:
1)The slide transitions were not smooth, there was a milisecond of a 'blink' whenever new bulleted items were moving into the slide. The blink also occured when transitioning from slide to slide- not just with the text.
2) The functionality for the click boxes which worked in v 5.5 of the project were totally gone... although you could still see it on the slide/timeline within Captivate. The functionality simply didn't work. I had to re-create every click box and delete the old ones.
3) The audio was a complete mess... sometimes it would play in synch and other times it would get 'lost' in itself if I pressed the back navigation button.
4) The module froze after the very first quiz question and would not transition. The occurred numerous times and even after I reloaded a fresh, clean version into the LMS.
5) Overall, I believe Adobe Cap 6 is not worth the upgrade fee. The only positive thing I noticed was that users didn't get 'stuck' on the loading screen forever but that should have been a bug fix in version 5.5 anyway! That one fix isn't worth a 350.00 upgrade! Now instead of sticking on the loading screen it puts the brakes on us once the quiz begins!
Our entire organization is shelving Captivate and researching other products that perhaps may not have as many bells and whistles, but at least they will WORK on our LMS! It's very, very frustrating to spend so much development time only to have the final results not work! SumTotal wants to blame Adobe and their crappy code that's under the hood, meanwhile Adobe wants to say that it's the LMS vendor's issue. THe bottom line is that Captivate in my opinion (and I've been using this product for at least 6 years) owes it to the user community to put out a corrected version that isn't a rushed job! It's like Adobe fixes three things, then breaks five... very frustrating to say the least. I hate to leave Captivate but at this point it's not worth the headaches.
Does anyone out there have any comments about their testing of version 6 or know who we can contact to vent our frustrations about this release?

I just spent hours adjusting a demo. I recorded some new slides in between existing slides and adjusted the timing. Now, when I publish, the slides are looking like they are overlapping at some points even though it doesn't appear this way in preview. Previously, I tried to publish to youtube and HTML and the output is unacceptably buggy. I am so frustrated and disappointed in this product.

Adobe software is getting more and more buggier

So, this is getting very frustating...
I have noticed that Adobe software is featuring more and more bugs in the latest versions. (CC)
Bug in After Effects is the following: there is this new feature that automatic reloads footage. So if you rendering a 3d sequence, AE reloads the seq.
A very weard thing is that if you load a sequence starting from 'filename.750.jpg' to 'filename.1400.jpg' AE CANNOT find the footage on a new startup of the project.
If you render the movie, you get those coloured bars. One can notice the bug when the footage in the project window is displaying blablag[0750]. Notice that this filename has a leading zero. The only solution to be absolutly sure that the sequence is fully loaded is to reimport that sequence. (do not replace, really import a new sequence) (which is a pain if you a few)
Then the filename will display no leading zeros.
(not sure if one can disable this autoload, but even if I can, I dont want to disable that, I want that feature to work)
Another bug: it is impossible to use the effect Timecode, AE will crash.
btw, photoshop CC also features some bugs. Smart layers are broken, photoshop will crash. Airbrush is crashing. And all this is on very powerfull machine.
Has anybody noticed the same thing????
Very frustating, I have some deadlines and I cannot effort to rerender the whole bunch over and over again.
Some machine info:
Using the latest CC software
on a macbook pro retina, highest model from 2013.
Newest OSX system.
16 gig ramm
over 100gig is still free.

has that been changed since AE CC?
I never had any issues importing a sequence. Also, I noticed that I really need to pick the first frame of a sequence. In this case, blablag.750.jpg. That was never been an issue. In the previous versions, you could always pick a random frame and AE just automatic fixes the start and end frame of the sequence. Now you have to be really carefull. Also, this doesn't explain, why AE just shows up the sequence perfectly fine, but on a restart of AE of a background render, things goes wrong.
weard....

We found that your app exhibited one or more bugs, when reviewed on iPad running iOS 7, on both Wi-Fi and cellular networks

We found that your app exhibited one or more bugs, when reviewed on iPad running iOS 7, on both Wi-Fi and cellular networks

1.) Wrong forum
2.) no concrete informations. Review did supply you with concrete details.

Re-Conforming and Audio Bug nightmares

Hi,
First, let me say that I've searched throughly about those problems before I came in here.
I own a company and we used to use FCP7 to edit our weekly show.
I've moved all suites to Premiere CC 7.2.1
Our workflow is a bit different than before, since PP can handle original files, in our case .mts sony AVCHD FullHD from FS700, NX70 a Handycam and the MP4 from GoPro Hero3.
Our main problems right now have been:
Re-Conforming:
I've searched about this and these are the possibles solutions
- Turn the creation of XMP off
- Disable XMP metadata linking
- Direct the cache and database files to the same external harddisk that our media is in
- Direct the scratch disk to the same Harddisk as the media.
- Media been on a Network volume and Computer clock / daylight saving time shifting.
- Before opening a project in a different machine, make sure to redirect (to find) the cache to the disk your using
I must say everything above was tested and dealt with but still. We have seen projects re-conforming by it self everytime we open PP. It normaly happens when moving from computer to another one. But sometimes happens on the same machine, between two days apart, with nothing different.
And the re-conforming takes a lot of time.
Audio Bugs:
Sometimes the waveform doesn't show up. Now this has a workaround, just go to clip > audio options > re-render audio. But it's annoying.
And more serious sometimes we got an audio looping 1sec over and over, even though the original is perfect, trying to re-render doesn't help. re-importing the clip doesn't help. Only deleting ALL the preview files (because you can't know which is which) that works.
Is there anyone with solutions (definitive) for these problems?
Regards

Hi Jim,
As I said, I'm using external USB 3.0 drives. No Network drives whatsoever.
All these:
System
Projects
Cache/Scratch
Media
Exports
Are in the USB 3.0 Harddisk.
If you are refering to the same drive as the OS that's not a solution as in some machines I have 160GB SSD.
Cheers,

Logic 9.0 won't allow upgrade to 9.1.8 and SMPTE Bug??

Hi All,
I have a lawfully purchased (full retail) fully useable Logic Pro 9.0 version installed on my Mac Mini. Recently, and though I do absolutely no SMPTE work, (and don't really know what it is or use it), when I try to load either a saved template or an existing song, a dialogue box comes up saving "New SMPTE frame rate found -- use it?".
Regardless of what I choose (cancel or use), it then starts acting quirky, with volume level sliders on the arrange page randomly changing and moving up and down. I downloaded 9.1.8 thinking it was time to install any bug fixes (and possibly solve the SMPTE issue) but when I double click on the .dmg icon I get the error message "An eligible Logc Pro version was not found in the applications folder. This update requires Logic Pro version 9.0 or higher". However, in my applications folder sits the Logic Pro 9.0 version.
Can anyone help with:
1) the weird smpte issue? (I'm a very basic user so the more explanation/simpler you make it, the more likely I'll be able to follow your fix)
2) why the update can't "see" my version of Logic Pro 9.0? (NOTE: I did use migration assistant from my Macbook to the Mac Mini.)
Thanks so much.
Jeff (NYC).
GEAR:
Mac Mini 2.4 GHZ, 8GB RAM
OS: 10.6.8
MOTU 828MK3 Interface
G-Tech Drive (for audio recordings)
OWC Drive (for virtual instruments
ISA One PreAmp

Yes, the Logic Pro app has to reside in Applications and not inside any other folder inside of Applications so glad you got that sorted out and it worked
As for the SMTPE issue.. It sounds like your SMPTE settings in the 828 have changed for some reason... so when you load a project Logic is expecting to see the 828 with it's previous SMPTE settings.... and when it doesn't it reports that error...
Therefore I would reset your 828 and see if that fixes things...
I believe you do so by following these instructions exactly as written...
With the 828mk3 disconnected from the computer, or the computer off and the mk3 in stand-alone mode:
Press the Param/Setup button (Twice)
Rotate the dial (Clockwise) until it reads "Factory Defaults"
Press The Value button (Twice)
The unit will read "Initializing"
You will then have reset your 828 back to it's factory default settings.

Iphone 4 (White MC604FB) Update iOs 6.0 - Wifi Problem and iphone bug when trying to unlock on call receive. Is this a known bug ?

Dear Members (and Apple Team)
I have two iphones 4 and two bugs on the white one
1/ Is the first gen (Black)
2/ Is the second gen (White MC604FB)
I both uptdated the into Update iOs 6.0 -
Bug 1 : With the white iPhone 4 i have a real Wifi Problem, as close as 5 to 7 meters from any WiFi spot, i lose the signal, where my "black" iphone at the same time and same distance shows full signal (and tested with safari.... works).
Bug 2 : Once the white iphone is in "stand by" when trying to unlock on incoming call, the touch screen works and receive the touch information, but it bugs on trying to unlock to receive the call. (very very anoying :o) have to call back almost every time.
Are those already known bugs ? Is there a fix ?
Reagrds
Alexandre

Dear Diesel
Thanks for your prompt reply.
I did restore before posting, in evry possible way. no improvment.
I have 24H ago updated to iOS 6.01. So far no more "screen jam" on incoming calls, but the wifi is still inconsistent with very poor signal strenght (compare to my black iphone 4)
PS : For information, did beleive there was two versions of iphone 4 (In Europe ) :
1/ Is firts generation "gen" with With board MC603FB
2/ The white one for me with board MC604FB

Ios8 copy and paste / Digital AV Cable / internet dropping and other bugs!

hello -
so like everyone else else there is a number of bugs I am running into. so here's my list- Yes I've tried to restore, so I am praying that the ios8 update will contain these fixes:
- copy and paste doesn't work between applications- but it's sporadic! (issue originally found when copying from a webpage to an email, then into notes from another webpage)
- my Apple lighting to digital AV cable doesn't "read/transfer" to the TV
- internet randomly drops for a few seconds to minutes for no apparent reason the it being an iPhone 6
- Facebook and other internet heavy apps like Associated Press are extremely lagging or give me an error unable to connect to server
- randomly freezes while taking pictures or taking notes- it won't even let me shut down
- voicemail set up doesn't work
I am sure there are more bugs but haven't seen them or I've forgotten about them! If anyone else has these problems please check the box that you do have the same issue. Also any known resolutions would be appreciated!
With Joy,
Christina

Another file?
Do you mean folder? Inside or outside iPhoto?
I'm trying to copy photos to a Sony Digital Photo Frame.
Select the photos you want to use.
Export them to a folder on the Desktop. File -> Export
Add that to the device.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

TP3 more bugs & problems tha in TP2

Hi everyone!
After some time playing with TP3 I have feeling it is slower and more buggy that TP2. And I noticed that many posts here are related to bugs in TP3 that were not noticed in TP2. Also, TP2 was working fine with JDK 1.6 while TP3 is not working at all. Looks like TP3 is feture extended TP2 but with more bugs and less performant...
My questions are: What is going on? When we can expect TP4 hoing it will be faster and more stable.
Cheers,
PaKo

Hi Pako
I agree for the bugs, tp3 seem plenty of new bugs and new features also ... it is great to have new features.
I disagree for your comment about performance. Performance is better for me, particulary in diagraming and off line database editors.
I didn't see any real improvements or worse performance in adf bc or adf faces editors.
It is a lot of work to be done by Oracle to improve JDev but it seem the final product will be really improved and usable and will offer a great profitable platform for great results.
Thank you Oracle to deliver it ... thank you for the next soon release (without the bugs) ... thank you to continue so hard.

Understanding bug ID and release notes documentation

Hi !
we planned to upgrade IOS switch on some switches, most switches are running 4 to 10 or more IOS release in late in compare to the most recent one. We would like to upgrade because we had some issue with port flapping and spanning-tree portfast issue with switches. I find in one release document some element looklike solve some of our problems.
So before upgrading we would like to avoid more issue or different issue which may have bigger impact we had actually, so I read latest release notes of our plate-form to choose the correct release for our need....
I find some bug ID in release notes 12.2(55)SE mark as Resolved and do not find it in 12.2(54)SE or 12.2(53)SE as "open" and some bug open in 12.2(53)SE as open and nothing about those in the next 2 releases (Open or Resolved).
So how can I choose correct release for our need, while also minimised required reading release notes documentation !
Thanks !

If the bug was discovered after the 12.2(54)SE release notes were published, only the 12.2(55)SE release note will show the fix. The older release notes will not be updated with bugs discovered after the relesae note is "printed." Only the most current release note has the most current data.
Bugs mentioned in 12.2(53)SE release note SHOULD have a follow up in future release notes, unless engineers determined that the bug was not a bug at all, but an expected behaviour, a customer misconfiguration, or a transient, unreproducable event.
The interactive Bug Tooklit is the best way to tell where a bug applies. If you plug in the bug ids about which you have questions, you can see a real time picture of the current state of every bug id mentioned in the release notes.

Possible List Drag and Drop bug

Hi all,
I am using a spark.components.List that I wish the user to be able to reorder by dragging and dropping. Therefore I have dragEnabled,dropEnabled and dragMoveEnabled all set to true.
I have a custom item renderer that has two states ('default' and 'notDefault' for the sake of argument) that the list uses. The currentState of the item renderer is determined by the data it is given.
When items are moved around they do get reordered correctly, however if I have an item in the 'notDefault' state and drag it somewhere it ends up rendered in the 'default' state after dragging, even if the data it is displaying requires the 'notDefault' state. What is more frustrating is that the item renderer reports its currentState as 'notDefault' even though it is showing 'default'.
The difference between the two states is that there is a VGroup with controls in it excluded from the 'default' state, and therefore if these are displayed before dragging (ie we are in the 'notDefault' state) they are consequently not displayed after dragging.
Anybody have any ideas?

Might be a bug. File a bug or post a simple test case.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

Article - In Place Element Strucure - Saves Time and Prevents Bugs

I hope you all enjoy it and find it useful: In Place Element Strucure - Saves Time and Prevents Bugs Thanks,
-Jim
[cross-post]

This one deserves a place in the structures palette.
For some reason I always open the array palette to select a "for loop"
and selecting the N of the for to change the visibility of the label.
A pity both don't work.
But I also agree with Stephen that changing palettes should be done only when really needed.
Every change proposal should have a lot of arguments. The more users LabvIEW has the more people need to agree on a change !!!!!
Additions on the other hand and alternatives are welcome.
greetings from the Netherlands

Updated my 4s and ipad3 and now both are basically useless. Cant access itunes store, app store, weather app wont work and multiple bugs with facebook. How am I supposed to fix all these problems????

Updated my 4s and ipad3 and now both are basically useless. Cant access itunes store, app store, weather app wont work and multiple bugs with facebook. How am I supposed to fix all these problems????

Hi Doomtrooper,
When you updated your iPhone 4S and iPad3 to iOS6, what exactly do you mean when you can't access the iTunes store? Have you checked your connection to the network?
Please be a little more specific

[svn:cairngorm3:] 17872: Popup: Exposed set accessor of open for view state usage and fixed bug when closing from model within popup .

Revision: 17872
Revision: 17872
Author:   [email protected]
Date:     2010-09-27 08:04:40 -0700 (Mon, 27 Sep 2010)
Log Message:
Popup: Exposed set accessor of open for view state usage and fixed bug when closing from model within popup. http://www.spicefactory.org/forum/viewtopic.php?p=3932. Added new sample to show model and view state interactions.
Modified Paths:
    cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpBase.as
    cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpFactory.as
    cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpWrapper.as
    cairngorm3/trunk/libraries/PopupTest/.actionScriptProperties
    cairngorm3/trunk/libraries/PopupTest/src/samples/MyPopup.mxml
    cairngorm3/trunk/libraries/PopupTest/src/samples/PopUpPM.as
Added Paths:
    cairngorm3/trunk/libraries/PopupTest/src/PopUpModelExample.mxml
    cairngorm3/trunk/libraries/PopupTest/src/samples/MyPopupWithModel.mxml

Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
Sadly, the following issue is NOT fixed for me. Is it with new projects only? I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
On the list above...
Switching between sequences can turn the render bar red.
This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
1) Create two sequences with multiple short clips (the more clips the better)
2) Make sure GPU acceleration is enabled.
3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
4) Hit SAVE.
5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
6) Toggle back to the original sequence and the delay occurs again.
7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
Sigh.

KOrganizer 4.7.0: bugs, bugs and more bugs?

Similar Messages

Maybe you are looking for