KP06 is not allowing to post monthly planning.

Hi ,
I have done configuration for KP06 to upload data from excel sheet.
Configuration done.
1) created planning profile in KP65.
copy 1-101 to Z1-101 and maintained monthly 1 to 12 period,
2) Assigned Profile in layout Kp34.
but planing data is not uploed monthly to all period.
it is uploading to period one only.
I trying to upload with excel sheet. Kp06.
Thanks in advance.
Ajay

Hi Ajay,
I'm facing the same issue, do you find any solution please?
Thank you
Houda

Similar Messages

  • System not allowing to post profit center

    HI
    I am doing manual FI posting. system not allowing to post to desired Profit center.
    every time it is taking Dummy profit center. even if i am changing to System throughing message
    (Dummy profit center set )
    i have not assigned the profit center to cost center. because i service ( created as cost center) are used in different profit center,
    i am doing only FI posting but system taking Dummi profitcenter..
    Regards
    Ds

    Hi,
    The concept of dummy profit center is to capture the costs of the transaction where the profit center is not assigned to
    any cost center.  Instead you can define a service profit center and assign in the service cost center so that all the cost are
    accumulated in the service cost center.  If other profit centers are assigned to respective cost centers excepting the
    service cost center, you can manually repost the cost through KB11N.  As a second option you have distribution
    cycle set for profit center for month end processing so that the service profit center will distribute the values to
    the respective receiver profit centers either with fixed amount or fixed percentage.
    Regards,
    Sadashivan

  • Negative quantity not allowed for Put Away Planned

    Dear Experts,
    I'm trying to activate the PDI document but the system show the error message: Negative quantity not allowed for Put Away Planned.
    I was looking the document flow from the item 10 and I saw there is one task was created with quantity "1 box" and the same document was cancelled but the quantity "2 box" was cancelled. I believe because of this is happening the error.
    All items from my HU is with the same problem, duplicate the quantity during canceling.
    Somebody can give me advice how fix it.
    I found a SAPNote but Note 1674037:Negative Put Away Planned quantity (PWP) due to "Store HUs" but I need a workaround to fix my actual PDI and finish the process.
    Regards,
    Alan Mattos

    Hi Petr,
    I checked the transaction SMQ2 and I dont have anything stuck there. Then I tried to change de deliveryquantity but the field quantity isn't available to change. My PDI document already been the Goods Receipt Status "Completed". I try to reverse this document and the system show the message: Delivery is locked (Posting Not Possible). I believe its happening because the PDI isn't active.
    Do you have other idea ???
    Thank you a lot for your help. 

  • System not allowing to post parked vendor invoice

    Hi gurus,
    Why system not allowing to post parked vendor invoice when workflow is used for gl document?????
    It is saying not released and no one is allowed to post???
    Thank you

    Hi Mohit,
    Post can be possible to next authorized level. Check settings or else go to FBV3 ,enter document number ,company code and year > Enter > where you can see the workflow tab > Click on that where you came to know how may release levels are assigned.
    In same view > Click on system in menu bar > services for object > Click on workflow icon > where you came to know who is the next approver.
    Regards
    Mani

  • Not allow to post GR with Exceed qty.

    Hi,
    PO is created for 100 qyt and Inbound delivery is for 120 qyt.
    Now while posting the Goods receipts, system is not allow to post since "PO Ordered quantity exceeded by 20.
    When i change the Purchase value key over and under delivery tolerance limit to 5%, eventhough system is not allow to post with exceed quantiy 120.
    Can anybody help on this.
    Regards,
    Sudhakar

    soory, i had given the worng example.
    PO Quantity - 100
    Inbound Delivery Qty - 120
    In Purchase Value Key:
    Under and Over tolerance Limit is 25 %.

  • Why am I not allowed to post here?

    I just tried to post a question and got "You are not allowed to post or edit this content".  What and why ?

    rccharles wrote:
    and have yet to be logged out
    You have pull.  I haven't been so lucky.  I've been logged out even with reloadevery -- reload failed.  I'm now reloading my profile.
    https://discussions.apple.com/people/rccharles?view=discussions
    Robert
    IF I have pull, I sure would like to use it on other stuff. No pull just a regimen that works 100% of the time
    Try this, works 100% of the time, IF you follow this EXACT WorkFlow... (the numbered list assume receiving an email notice)
        Go to your forum of choice Main Page (this will become your 'Base Camp' page)
        click Login, which takes you to the Login page
        Browser Bookmark that Login Page
        click [Sign In]
            you are now logged in and have started a 'timer' in a set cookie
            you will be logged off without notice after ±30 minutes of inactivity
            clicking a Link that is NOT a JavaScript link resets the timer in the cookie
            I use a browser add-on that reloads the Base Camp page every 20 minutes = NEVER logged off by the timer
            - DO NOT close the TAB,    the AutoReloader is tied to the TAB not the page itself
                Safari - SafariTabReloader
                Firefox - ReloadEvery: "Reload web pages automatically"
        Switch to your email client or WebMail page**
        Click the link to Reply
        AutoSwitches to browser, thread page & post to which you are replying = Login State = TRUE
        If you use an AutoReloader, all you need do the rest of your browser session is repeat #5 & #6
    Vary from this WorkFlow by clicking reply in the email FIRST and all bets are off... you will experience login failed on that page but logged in on another... 100% of the time with that particular email notice - I have not found the workaround or cause
    ** OR CMD+click a link on BaseCamp page to open in a new TAB
    https://discussions.apple.com/people/rccharles?view=discussions  = VERY empty below the TAB bar and above the footer
    https://discussions.apple.com/people/rccharles  = normal Bio page
    https://discussions.apple.com/people/ChitlinsCC?view=discussions  = VERY empty below the TAB bar and above the footer
    where did you come up with the "  ?view=discussions  " in the URL? I have never seen this advised... certainly not the plain ol' " /content " addition nor is it tt2's Magic Twangers. Are you trying to force something to happen that never will? It is a wonder you don't get a 404.Not Found error!!
    CCC

  • Aur-general "You are not allowed to post to this mailing list"

    I found a font I needed a few days ago that I couldn't find in the AUR, so I made a package and threw it up on the AUR. A few days later, when I realized I didn't even end up installing it after the packaging, I searched for it to download and install it, only to find there was a package of that font from half a year ago, so I figured I'd go report my package for deletion.
    The AUR wiki page states that removal requests should be emailed to aur-general. When doing this, I get an automated response from aur-general-owner stating:
    "You are not allowed to post to this mailing list, and your message has
    been automatically rejected.  If you think that your messages are
    being rejected in error, contact the mailing list owner at
    [email protected]"
    How do I get permission to send my removal request? And if getting permission requires something not so easy, could someone forward the email for me?

    https://mailman.archlinux.org/mailman/l … ur-general did you read this?

  • Test - Not allowed to post

      I've been getting messages stating that I'm not allowed to post or edit content, but the Apple technician said my posts are going through. I'm confused.  Anyone else having this trouble?

    if you have autodiscover.domain.com on the certificate, why are you using a DNS srv record?
    What happens if you put a hosts file entry onto the external machine running outlook and point it to the external interface of the Exchange server??
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Great. Not allowed to post under Apple ID

    Why am I not allowed to post (anymore) with my old Apple-ID I also use for purchaes and stuff? The forum still logs me in, but gives me a "not allowed to post" message when I post...
    That *****.
    I.

    Could you copy and paste in your response box
    which URL of the pages your are trying to post in?
    And have a look at this thread to make sure
    the same thing isn't happening to you . . .
    http://discussions.apple.com/thread.jspa?threadID=470860&tstart=50

  • Message says I'm not allowed to post?

    I've been trying to post a question to the iPhoto community about backing up iPhoto, and when I try to submit the post I get the message "you are not allowed to create or update this content".  I've tried several times, logging out after each failure.  My time creating the post was only a couple of minutes -
    I've posted lots of times over the last couple of years without any problems - ?  I'm logged in - wonder if this one will go - ?
    Lynne

    Here's my suggestion for what it's worth. Purchase the shareware backup utility, Carbon Copy Cloner 4.0.2. If you are using Mavericks or earlier then download the 3.5.7 version. Version 4 is required if you are using Yosemite. You can use it to set up a scheduled backup of your selection of individual files or folders. The backup can be configured to run on a time schedule or only when you click the Run button or connect the backup drive. It will backup to any mounted drive including a network drive. It can be use together with Time Machine or without Time Machine. The latter is my preference.
    CCC can backup 65 GBs of files in a couple of hours over USB 2.0. Given that an iPhoto Library is seen as a single file, any backup program will do a complete backup each time. This is one reason many users will exclude it from a backup when that backup is done hourly. This also a problem with Parallels, Virtual Box, and VM Fusion pseudo-disks. Fortunately, CCC can be configured to do different backups on different schedules.
    If you don't require Windows compatibility any longer, then I would repartition and reformat the backup drive for OS X - partition using GUID instead of MBR; and, format Mac OS Extended, Journaled instead of MSDOS (FAT.)
    I hope this answers your question. I don't know why you had a problem posting it before.

  • Why am I not allowed to post?

    i Wrote a long question on this forum then when I wanted to post it I got a message that I wasn't allowed to post. Why not?

    This workflow gets around many problems with ASC.
    ( I knew there was a reason for keeping my tried and true method. ChitlinsCC, et. al.  Ever here the phrase:  A fix from Jive is a contradiction in terms? ChitlinsCC posts are great! But in this instance, I think the scenario below is more robust. )
    Here is my ASC work flow...
    1) I login.
    2) Start an auto reloader.
    Unless you do something every thirty minutes you get logged out.  The forum software waits to tell you this as long as it can to keep you in suspense  ;-) .
    I use Firefox and ReloadEvery.
    https://addons.mozilla.org/en-US/firefox/addon/reloadevery/
    You need to pick a page that will reload over time without stalling out. It's ASC.  I've found my profile display the best to use. I get my Profile page after some  logins.  It's ASC.  Change rccharles to your apple id.
    https://discussions.apple.com/people/rccharles?view=discussions
    3) I open another window to do my normal ASC browsing.
    4) I have a FireFox bookmark to goto the discussions that I have participated in. I've modified it to add on the content stuff.
             turingtest2 recommends. Change rccharles to your apple id: 
    https://discussions.apple.com/people/rccharles/content?filterID=participated~obj ecttype~objecttype%5Bthread%5D
    5) Use turingtest2's generated links with the /content suffix as browser bookmark to the ASC discussions: 
    Site map of Communities and Categories
    https://discussions.apple.com/docs/DOC-2463
    6) I run with Hiroto's modification to user content.  This is the only way these forums are readable for me.  How to adjust the format and layout of ASC Web Pages:
    https://discussions.apple.com/docs/DOC-7501
    7) Read and answer my old posts.  I kind of memorize the time I last posted. ( It's way bad that apple eliminated the last poster to a thread. )
    8) I use tabbed browsering.  From a list of discussions, hold down the command key then click on the link. You get two tabs this way. The original window will keep where you have been.

  • System SAP does not allow to post a journal that is not balancing?

    According to the implementation of controllers SOX in the company, I need
    to verify if the SAP ERP system must like standard functionality not
    allow to record documents that are not balanced (debit = credit).
    I appreciate its collaboration and I am awaiting its commentaries

    Hi
    SAP Follows the document principle which means that unless the debit is equal to credit in a document you cant save the document.
    This is based on the double entry system of book keeping and in sync with the accounting principles accepted world over.
    I hope im clear
    Assign points if useful
    Regards
    Aravind

  • How to allow user to 'Park' and not allow to 'Post' document in F-02

    Hi Guys!
    I want the users to only be able to 'Park' document, and restrict them from Posting FI document in F-02. Can any body help me on this.
    Helpful answers wud be rewarded for sure.

    Hi Tripat,
    In your Case  restrict the user by using user exit. please find below  user exit's for  F-02  select suitable one as per your requirement.
    F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002            FIDCC1: Change IDoc/do not send
    F050S003            FIDCC2: Change IDoc/do not send
    F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001            Balance Sheet Adjustment
    FARC0002            Additional Checks for Archiving MM Vendor Master Data
    FEDI0001            Function Exits for EDI in FI
    RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00            Line item display: Checking of selection conditions
    RFKORIEX            Automatic correspondence
    SAPLF051            Workflow for FI (pre-capture, release for payment.
    if you give me brief i can help you out more.
    if helpful REWARD points
    Thank you .
    Regards
    Ramana

  • Parking of Document - not allowed to post

    Hello
    In our scanning system we have a default account where documents are parked before confirmation. Sometimes the claimant forget to change the account (from the parking document) before posting and confirming the document. How to avoid this?
    Is it in any way possible to block for postings but not parking of documents on a specific account?
    Thanks in advance
    Best regards
    Søren Kirch
    LOGSTOR

    Dear Søren Kirch,
    I think you can create validation rules where you can state the in case the transaction code is that of parking the document and the GL account is the one you have to restrict, then the saving is possible.
    In case the transaction code is that of posting a document, then an error message has to be displayed.
    regards
    Venkatesh

  • Tolerance group- not allowing to post

    Frnds
    i am trying to make an acquisition posting trough F-90
    and it is shooting me following error
    No amount authorization for customers/vendors in company code 1100
        Message no. F5155
    Diagnosis
        No amount authorization for customer/vendor line items has been
        specified in company code 1100 for the user group to which you are
        assigned.
        Provided that you are not explicitly assigned to a user group, the
        amount authorization to the group blank (" ") is valid
    Please reply asap
    thanks

    Frnds
    I did create the tolerance group and put it in the vendor master record also but it gives me the same message.
    No amount authorization for customer/vendor line items has been
    specified in company code 1100 for the user group to which you are
    assigned.
    Provided that you are not explicitly assigned to a user group, the
    amount authorization to the group blank (" ") is valid.
    edure
    If you entered the correct company code, initiate the maintenance of
    tables T043 (user groups) and/or T043T (company code authorizations).
    please help

Maybe you are looking for

  • Looking for an app that combines an equalizer with video out.

    I'm looking for an app that has video out (like "Upsize" or the iPod built-in photo slideshow) with an equalizer (preferably like "Denon Audio" or "EQ Pro" so that I can listen to equalized music through my TV. Upsize is close, as it allows for album

  • Getting error in while changing sales order which is created using BAPI

    Hi All,    I have created the sales order using BAPI ( BAPI_SALESORDER_CREATEFROMDAT1 ) and i am successfully creating sales order using this BAPI. But while i want to change sales order iam changing Shipping Conditions in Header Data of sales order

  • Bex Exception Aggregation in 3.5 equivalent to 'TOTAL'

    Hi All, Can anyone help me in getting a functionality equivalent to exception aggregation 'TOTAL' in BW 3.5. I have  a requirement which can only be fixed using the exception aggregation 'TOTAL', my bad in my current client they dont have BI 7.0. So

  • Adobe acrobat RDS Requirements

    Dear All, We have a slow printing issues with Adobe Acrobat on a RDS Windows 2012R2 Infrastructure. Can anyone tell me if Adobe Acrobat Standard XI is supported by Acrobat on Windows 2012R2 RDS. I cannot find any specific requirements required for Wi

  • Service Pack needed for ABAP MApping ?

    Hi everyone. i'm trying to activate the ABAP MAPPING but it's no working. I've done everything SAP documents say. Even i've followed all your posts but it doesn't work. I wanto to know if ABAP MAPPING is available for Service Pack 9 (the one i have).