KP06 - No transactions for cost planning are defined in the Nos range table
Dear CO Experts,
I m trying to post Cost Planning using T-Code KP06.
please help, the Error which pops is :
*No transactions for cost planning are defined in the number range table*
*Message no. K8007*
*Diagnosis*
*You want plan primary or secondary costs/revenues in controlling area 9000. This is not possible because no entries exist in the number range table for the cost planning transactions you want to perform.*
*This is an internal system error.*
*System Response*
*Processing is terminated.*
*Procedure*
*Start program RKTKA04C.*
*Execute*
*After the program has run successfully, start planning again.*
HI,
the planning subobjetcs to be assigned in KANK to a CO-number range are (maybe you do not need all of them):
KAZP
KOAP
KPPB
KPPZ
KSP0
KSPB
KZPP
KZRP
PAPL
RKP1
RKP2
RKP3
RKP4
RKP5
RKP6
RKP7
RKP8
RKP9
RKPB
RKPL
RKPQ
RKPS
RKPU
RKPV
RKPW
RKPX
RKPZ
best regrads, Christian
Similar Messages
-
Taxes and duties on components for cost plan
Hi experts
I am working for below scenario:
The components those are planned must be added with applicable taxes for cost plan.
In case of imported goods, the applicable import duties need to be added to cost plan.
Similarly in case of external services, the service tax to be included.
For this purpose i wish to maintain different costing sheets (with various tax rates).
The relevant costing sheet is added in the activity/ component.
Is this OK or any other solution?
In this case, the predefined costing sheets to be used. As and when new rate comes in to picture, customizing to be done.
Any solution, with which user can make use of different variables easily?
warm regards ramSivaHi Virendra
I will maintain different costing sheets as follows:
00001: No overhead
00002: VAT 10%
00003: Service tax 12%
No one is defaulted with any of the profile.
I am thinking to make the field at activity level mandatory.
So, user has to choose the appropriate costing sheet at each activity level.
As the description is maintained with detail of tax, the user can choose the right one.
I request to comment and suggest if any easy way to achieve this requirement.
warm regards
ramSiva -
Generating data source for a planning area
Hi all,
I have a problem when generating a datasource for a planning area as it gives the following logs.
Activate table /1APO/EXT_STRUXXXXX
Tabble 1APO/EXT_STRUXXXXX was activated with warnings
and the data source is not being activated.
I have also created an entry in the table /SAPAPO/TSAREAEX and tried to activate the datasource for the planning area ,it is saying the datasource already exists.
Can anyone give me a straight solution for this.
thnks in advance.Hi Satish,
After you generate the datasource, go to transaction /n/sapapo/sdp_extr and try doing a check on this datasource. If you still get those warning/error messages, try the Repair datasource option and see if it fixes the issue. In RSA1, replicate this datasource and then try activating it there and see if it works. Don't create an entry in the table /SAPAPO/TSAREAEX, as this is not a standard recommended way of doing it. Good luck
Regards,
Mohammed. -
Data source for a planning area
Hi Experts,
I have created a data source 9AZDP_APAP for my planning area ZDP_APAP. When I'm creating this data source, SAP itself prefixing my datasource name with '9A'.
I'm wondering is this ( Starting the data sorce name with '9A') with in our system only or with every system.
If it is with every system then is there anyway I can override this.
The reason why I'm asking this question is my data source is giving error " M version is different from A version' in RSA1, when I'm trying to activate my datsource I'm getting authorization error. When I contacted my security people on this they are telling I'm not following the naming standards. They are telling that the data source name should start with Z.
All the inputs on this will be highly appreciated.
Regards,
Brahma ReddyHi,
Generating a data source on a planning area in APO is really very helpful function we have. this will help us to save a lot lot time to generate cube/rules/source.
Definately, when system generates the data source it will follow its own logic "9A" which we can not change.
I guess you create a DataSource manually if required, where you can follow your own logic, but that is not really consistent as system generates. becuase when it generates, it will check for time char and all based on storage bucket profile and generates.
Hope my information will help you in understanding the importance of auto generation of data source
Yarala -
Time Series Objects for a Planning Area
Hi all,
Can anyone let me know why do we create Time Series Objects for a Planning Area.
What is its Role & significance..
Regards,.
Vishal.S.Pandyatime series is usually a Demand planning concept(and used in SNP as well but in SNP its predominantly the order series that plays a main role)
time series is a general concept in statistics(and forecasting) wherein the value of a key figure is represented in a time bucket
Time series gives you an idea of the gradual change in the values by time and the relation of the future based on the past
planning area in APO (and other tools) tries to represent this as a 2 dimensional model with time on the columns and key figures in the rows. the value that you load into the cells that are formed by the above are based on the characterisitic values you choose from your MPOS which is linked to the way the values are stored in the planning area
The planning area stores data for each key figure in the smallest unit of time(technical storage buckets) and the lowest level of characterisitc value combination -
why am I still getting this message after logging in? "This computer is no longer authorized for apps that are installed on the iPhone “*************s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store?" - after I have logged in and get the message that the computer is already authorized!!!?? - and then the above message pops up again?
Click here and follow the instructions.
(71175) -
while trying to sync with my iphone I recieve the message: This computer is no longer authorized for apps that are installed on the iPhone “Terri George’s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store? When I put in my password and hit authorize, I get a message telling me there was an unknown error (-50). Would love to sync today. Any help would be appreciated.
The -50 error is documented in this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
Here is a synopsis:
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
when syncing iPad to MacBook Pro itunes says "this computer is no longer authorized for apps that are installed on the ipad" . When I enter my id and password it tells me the computer is authorized.
http://support.apple.com/kb/TS1389
-
Event for Cost Planning modification in Project System ( Cj40)
Hi gurus,
I'm unable to find a way to raise an event for the creation of cost plannning trought the CJ40. I've considered everything i know, from status change to exits/badi. Has anyone got similar requierements? ? I've seen some similar question in SDN, buy they are unaswered.
The only idea I have to create a document change from scratch, but i don't know if it it's possible.
Any suggestions.
Regards,
Jose Rovira Ayza
Barcelona, SpainI'm not an expert in the CJ40 transaction so there could be actually a standard solution. As far as your question is concerned, I will assume that change documents didn't work for you (transaction SWEC). If that is the case, have you considered implicit enhancement spots? If not, they could be an option. Basically, you find where the cost planning is saved. I'm talking about where the record is actually inserted into the database. It will typically be a function module. At the end of that function module, create an implicit enhancement implimentation. You need to check if the creation was successful and if so, create an event using function module SAP_WAPI_CREATE_EVENT. Just make sure you don't set the commit flag if the system is going to commit after the function module is called.
-
Dear Expert,
Can anybody tell me wat are the standard BAPI available for doing cost element based /activty input planning in SAP.
Thanx in adv.
Regards
AshisHi Ashis Mohanty !
this is list of BAPI's used frequently in PS
BAPIs used in PS Transactions
Project Definition:
BAPI to extract details of Project Definition:
BAPI Name BAPI Description
BAPI_PROJECTDEF_EXISTENCECHECK To check whether a project definition exists
BAPI_BUS2001_GETDATA
To get detailed information about a project definition. To do this, you must transfer the external ID of the project definition in the parameter I_PROJECT_DEFINITION. If required, you can also specify in which language the language-dependent fields, such as time units, system status, and so on, are to be returned. If you do not specify a language, the system language is used
BAPI_PROJECT_GETINFO To read detailed information about project definitions and the WBS elements of projects from the system.
BAPI_PROJECTDEF_GETDETAIL To read detail information about the project definition
BAPI_BUS2001_GET_STATUS To get both the active system statuses and the user statuses for a project definition
BAPI_PROJECTDEF_GETLIST Provides a list of project definitions
BAPI_GET_PROJECT_STATISTICS Display project statistics
BAPI to create/update Project Definition data:
BAPI Name BAPI Description
BAPI_BUS2001_CREATE Create a project definition
BAPI_PROJECTDEF_CREATE Create a project definition
BAPI_BUS2001_CHANGE Change Project Definition
BAPI_PROJECTDEF_UPDATE Change Project Definition
BAPI_BUS2001_DELETE Delete Project Definition
BAPI_BUS2001_SET_STATUS one system status and one user status can be revoked each time, and one system status and one user status can be set each time for a project definition
WBS - Work Breakdown Structure:
BAPI to extract details of WBS element:
BAPI Name BAPI Description
BAPI_BUS2054_GETDATA To get detailed information about WBS elements.
BAPI_BUS2054_GET_GUID_FROM_KEY Read the GUID (Global Unique Identifier) using the
external object key.
BAPI_BUS2054_GET_STATUS To read the active system statuses and user statuses for
a list of PSP elements
BAPI_BUS2054_GET_KEY_FROM_GUID Read the externalobject key (WBS Key)
using the GUID (Global Unique Identifier).
BAPI create/update WBS element data:
BAPI Name BAPI Description
BAPI_BUS2054_CREATE_MULTI Create WBS Element
BAPI_BUS2054_CHANGE_MULTI Change WBS Element
BAPI_BUS2054_DELETE_MULTI Delete WBS Element
Network:
BAPI to extract details of Network:
BAPI Name BAPI Description
BAPI_NETWORK_EXISTENCECHECK Check whether network exists
BAPI_NETWORK_GETDETAIL Read detailed information about a network including all objects from the system.
BAPI_NETWORK_GETINFO Read detailed information about a network including all objects from the system
BAPI_NETWORK_GETLIST Produces a list of networks with descriptions. Returns a container of network numbers
BAPI_BUS2002_GETDATA Returns Detail Data for Network Header.
BAPI_BUS2002_GET_GUID_FROM_KEY Read GUIDS Using the Network Keys
BAPI_BUS2002_GET_KEY_FROM_GUID Read Network Key Using the GUIDs
BAPI_BUS2002_GET_STATUS Get network Status
BAPI create/update Network data:
BAPI Name BAPI Description
BAPI_NETWORK_MAINTAIN To edit network headers, activities and relationships
BAPI_BUS2002_CREATE Create Network Header. Only one network can be created each time this BAPI is called.
BAPI_BUS2002_CHANGE Change Network Header. Only one network header can be changed each time this BAPI is called.
BAPI_BUS2002_DELETE Delete Network Header. Only one network can be processed each time the BAPI is called.
BAPI_BUS2002_SET_STATUS Set/Reset Network Status. At the same time, you can revoke one system status and one user status, or set one system status and one user status in a list of activities for the network.
Activity:
BAPI to extract details of Activity:
BAPI Name BAPI Description
BAPI_BUS2002_ACT_GETDATA Detail Data for Activities
BAPI_BUS2002_GET_ACTGUID_4_KEY Read the GUIDs Using the Network Activity Key. Read the GUID (Global Unique Identifier) using the external object key.
BAPI_BUS2002_GET_ACTKEY_4_GUID Read the Network Activity Key Using the GUIDs. Read the external object key using the GUID (Global Unique Identifier).
BAPI_BUS2002_GET_STATUS Read active system statuses and user statuses for a network header (NUMBER) as well as its activities
BAPI create/update Activity data:
BAPI Name BAPI Description
BAPI_BUS2002_ACT_CHANGE_MULTI Change one or more activities. Activities of one network only can be changed each time this BAPI is called.
BAPI_BUS2002_ACT_CREATE_MULTI Create one or more activities. Activities of one network only can be changed each time this BAPI is called.
BAPI_BUS2002_ACT_DELETE_MULTI Delete one or more activities. Activities of one network only can be changed each time this BAPI is called.
Activity Element:
BAPI to extract details of Activity Element:
BAPI Name BAPI Description
BAPI_BUS2002_ACTELEM_GETDATA Get detailed information about activity elements.
BAPI_BUS2002_GET_ELEGUID_4_KEY Read the GUIDs Using the Activity Element IDs
BAPI create/update Activity Element data:
BAPI Name BAPI Description
BAPI_BUS2002_ACTELEM_CHANGE_M Change one or more activity elements. Each time this BAPI is called, only the activity elements for one network can be changed
BAPI_BUS2002_ACTELEM_CREATE_M Create one or more activity elements. Each time this BAPI is called, only the activity elements for one network can be changed
BAPI_BUS2002_ACTELEM_DELETE_M Delete one or more activity elements. Each time this BAPI is called, only the activity elements for one network can be changed
Activity Type:
BAPI to extract details of Activity Type:
BAPI Name BAPI Description
BAPI_ACTIVITYTYPE_GETDETAIL Detailed information on a selected activity type on Key Date.
BAPI_ACTIVITYTYPE_GETLIST List of Activity Types Using Selection Criteria
BAPI_ACTIVITYTYPE_GETPRICES Determines, for a given day, activity prices for cost center/activity type combinations.
BAPI create/update Activity Type data:
BAPI Name BAPI Description
BAPI_ACTTYPE_CHANGEMULTIPLE Change One or More Activity Types
BAPI_ACTTYPE_CREATEMULTIPLE Create One or More Activity Types
Confirmation:
BAPI to extract details of Confirmations
BAPI Name BAPI Description
BAPI_NETWORK_CONF_GETDETAIL Using this method you can make the detail data of a confirmation for a network available for the transferred object. You can also make goods movement posted together with the confirmation available.
BAPI_NETWORK_CONF_GETLIST All confirmations are determined for the specified network activity or activity element. The transferred capacity category and split are interpreted as additional constraints
BAPI_NETWORK_CONF_GETPROP To make default data available for confirming network activities
BAPI create/update Confirmation data:
BAPI Name BAPI Description
BAPI_NETWORK_CONF_ADD To enter confirmations for network activities/ activity elements and splits.
BAPI_NETWORK_CONF_CANCEL To cancel a network confirmation that has already been booked.
Thanks ,
Dhruv Kumar Malhotra -
Prcessing KEU5 transaction for multilple controlling areas in parallel
Hi,
I have executed KUE5 transaction with an assessment cycle for a controlling area and when i try to execute the same transaction with an assessment cycle for another controlling area in parallel, there is an error message 'Cycle YOCETEST2 01.02.2008 cannot be started because run group 0000 is locked'.
Please provide me a solution to execute the assessment cycles for multiple controlling areas in parallel.
Regards,
Satish.Hello,
Are you able to solve this? I am getting this error sometimes when the transaction KSV5 fails.
Please let me know.
Thanks,
Rushi -
Problem in creating time series objects for a planning area
Hi Friends,
I am working on SCM 4.0 APO. I am trying to create the time series objects for a 'Z'planning area which i have created. This Planning area is linked to a planning object structure which contains only three characteristics 9amatnr,9alocno & zplnpart. But the creation of time series objects is taking a long time. the screen just remains the same.
Can anybody encountered such a problem any time?
request you all to put some light as what could be wrong or causing the delay in creating them???
All helpfull answers will be suitably rewarded.
Thanks
mvdHi mv d,
I have a couple of questions:
1) how many Key Figures does your planning area have?
2) what is the length of your time series horizon?
3) how many characteristic combinations are currently in the Planning Object Structure? and how many newly character
I am asking because these aspects might affect the running time of the time series creation. Have you also tried creating the time series in the background? How long did it take there? -
STS Limitation for Multi Planning Areas
Is there a problem when using multi planning area based applications in the STS?
Thanks
TimHi
in SAP-libary under Customizing the Status and Tracking System /Prerequisites you have the following text:
The planning area of the characteristics and key figures that you access in the Status and Tracking System must be a basic planning area. You cannot use multi-planning areas in the Status and Tracking System.
Hope this helps
Maryon -
Easy Cost Planning - Passing info down the hierarchy
Is it possible in Easy Cost Planning to pass characteristics down the hierarchy for use lower down.
For example, enter the dimensions at the top level and have them passed down for use in calculations lower down the hierarchy?
Thanks
GrahamHere is a WIKI that has detailed steps to create.
http://wiki.scn.sap.com/wiki/x/5IHpFQ
http://wiki.scn.sap.com/wiki/display/PLM/ABAP+calls+to+create+Easy+Cost+Planning+in+Project+Systems -
Useful info for people who are stuck with the Portege 3490CT
can you guys try and leave a feedback?
BIOS SETTINGS so usb floppy and external cd/dvd player work
Boot the laptop while holding down the ESC key. It'll beep at you and display 'Check system. Then press [F1] key'. Press the F1 key. This gets you into bios settings. The keys to navigate through this are shown at the bottom of the screen.
There's four things you want to change from their default settings.
In the 'Peripheral' section:
Set 'USB-FDD Legacy Emulation' to 'Enabled'
In the 'Boot Priority' section:
Set 'Boot Priority' to any option where 'FDD' comes before 'HDD'
Use the PgDn key to move to the next screen.
In the 'Configuration' section:
Set 'Device Config.' to 'All Devices'
In the 'PC Card' section:
Set 'Controller Mode' to 'CardBus/16-bit'
The boot priority option is only needed for the install (and you may be able to boot from CD if you set the PC card controller correctly .Hi
Well, as far as I know the USB-FDD emulation is needed if you use the WinNT on your notebook. This option has no influence on WinXP or on other Windows OS.
You need a Toshiba Mobile PCMCIA - CD-ROM/DVD compatible drive to boot or to install the OS from CD.
If you want to buy one so I recommend to order this part from the ASP because you will be 100% sure that you can boot from this drive.
Bye
Maybe you are looking for
-
We used the Inventory Audit Report to determine inventory value ending in a specific period. It seems to work okay but it lists every single item in our inventory. We are looking for more of a summary report. The only option we have for this is by
-
Is there Oracle Application for Service Company
Dear All, especially for Oracle Corporation Please let me know, is there any Oracle Application for Service Company that has business line in services such as (cargo/comodity inspection, verification, sertification) So far, I look that Oracle Service
-
제품 : ORACLE SERVER 작성날짜 : 1997-10-10 ora-2085 에러가 나오는 경우는 dblink를 만든 쪽에서 다음과 같이 수정하시면 됩니다. 방법1) $svrmgrl SVRMGR>connect internal SVRMGR>alter system set global_names = false; 그 다음에 다시 연결하면 됩니다. 방법2) 예를 들어서 ORACLE_SID 가 ORA7 일 경우로 가정하면 $cd $ORACLE_HOM
-
Hello Consultants, my requirement is, i have created one function group and it holds around 6 function modules. when i call my first FM in the group, i want to pass header data and store as a global data and i want to use the same data in other FM al
-
M-Audio Direct Link only works in Administrator Account
Oxygen 61 3rd Generation - Direct link works fine - but only when logged into the Administrator Account. I have all the Library folders for the account I want to use this keyboard with set to read/write - Midi Set Up sees the keyboard - will play not