KSB1 report add fields

hello,
is there a way i can see only open items when i run ksb1 report for cost centers.
Thanks

Hi
Whether an account is maintained as an Open Item Mgt is relevant to Balance sheet accounts and not P& L accounts. Cost centre assignments will be applicable for P&L accounts. Hence I am not clear on the requirement to view only open items in KSB1 report.
Nadini

Similar Messages

In FBIC*** report , add fields

I need some information amout FBIC3 report's coloumns
Is there any way to add "name explanation" (GL Account's) and "company code name in the report

Hi
Whether an account is maintained as an Open Item Mgt is relevant to Balance sheet accounts and not P& L accounts. Cost centre assignments will be applicable for P&L accounts. Hence I am not clear on the requirement to view only open items in KSB1 report.
Nadini

Add field in KSB1

Hi all,
I would like to know if I could add GL field (like BKPF-XBLNR) on KSB1 Report ? And if yes, how can I do it ?
Best regards,
Gilles.

Hi
I was able to fetch BSEG-XREF1 using exit COOMEP01
You need to add desired fields in structure CI_RKPOS
Sample code is attached below.. See if that helps you to fetch BKPF-XBLNR
SELECT SINGLE vbel2 xref1 xref2 FROM bseg
INTO (cs_record-vbel2, cs_record-xref1, cs_record-xref2)
             WHERE bukrs = cs_record-refbk
               AND belnr = cs_record-refbn
               AND gjahr = cs_record-refgj
               AND buzei = cs_record-refbz.
br, Ajay M

Add fields in KOB2 & KSB2 report in selection screen as well as output

Dear All,
I have an issue in which i have to add fields in KOB2 & KSB2 report.
i need to add below fields to KSB2 report.
1) Internal order
2) Vendor
3) Purchasing group
I also need to add profit centre in selection screen for KSB2
Similarly for KOB2 i need to add below fields
1) Cost centre
2) Vendor
3) Purchasing group
I also need to add cost centre as input for KOB2 report.
I have gone through note 325546 "CO line item reports: Creating a user-defined field" which can be helpful.
However i am not sure as to how do i add fields in input screen as required.
Other alternative is to create a Z report however when i try and copy the report both KOB2 & KSB2 call same report "RKAEP000".
I am not able to get as to how do i differentiate the call of different screens when ZKOB2 is called or when ZKSB2 is called.
I could identify " c_item_group" field having different values however i couldnot get a proper logic as to how correct screen can be called based on input
Please suggest .
Thanks,
Ronak

Hi Raymond,
The note 747588 is good as soon as you are adding fields from the same table only.
When I have added additional table into KAEP_SCOVP selection view below COVP (just because the extra fields I need are not in COVP) they will show up in KOB1 as selection criteria, but not getting saved.
Any idea if any ABAP should be regenerated or what extra steps are required when adding more tables into Selection View?
Thank you!

How to add field to the header for FBL5N ALV report

Hi,
I need to add fields to the customer line item display ALV report(FBL5N) header part.Right now there are four fields in the header like customer, company code, name and city, after that I need to add first name last name and phone no. Can any one tell me where exactly I need to add and populate there fields to be appear in ALV output list.
Thanks in Advance
Swapna

Yes I have tried, I have place a break point in that perform but it does not stop. I think that is not the correct place to added and populate fields. That routine is for populate selection screen ranges single and multiple values and parameters only.
Thanks
Swapna

Add fields in Drilldown customer reporting open items

Hello,
I have made a copy of the standard Drill down report 0SAPDUEAN-01,but I want to add fields that are not in the pooll list (like Reference - BKPF-XBLNR) or Assignment (BSEG-ZUONR).
How can I do this?
Any help will be rewarded
Best regards,
Victor

Hi Austin
I need to do the same. I need to bring Bill of Lading number (which is Shipment number in our case). I need to bring that to the assignment field in the gl account. I know this can be done through sort key, but the field TKNUM is not avilable for sort key. I was wondering if you have found any solution of this.
Thank you
John

Add fields in delivery report (ROIGSD01) in TD.

Dear Expert,
Anyone knows how can i add fields in the report ROIGSD01? the one which I use to get the deliverys in TD
I already added the fields in the ROIGSD01_ITEM_ALV structure, but I could not find the user-exit to fill this fields.
anyone made it before?.
I would realy appreciate you help.
Best regards.

Hi
Madhu is right. Please, see the coding in include V50R_USEREXITS
* 1. Add field to list-display
* Userexits for additional fields on list display
* use append-structure in DDIC at structure SHP_VL10_ITEM
* and ad field value in one of these routines
*INCLUDE LV50R_VIEWG02.       "POS_ITEM_FILL_USER:       SD/MM-orders
*INCLUDE LV50R_VIEWG03.       "POSTAB_VEPVG_FILL_USER    SD-Index
*INCLUDE LV50R_VIEWG06.       "POSTAB_VETVG_FILL_USER    MM-Index
*INCLUDE LV50R_VIEWG07.       "POSTAB_DELIVERY_FILL_USER Delivery item
Do double click and see the coding. If you are in ECC 6.0, do an implicit. If not, go to SCCR.
I hope this helps you
Regards
Eduardo

Add field TIDNR to list edit PM reports

Hi,
We have a requirement to add field TIDNR (Technical Identification number) from ITOB table into several list edit PM reports (IW28/29/38/39/64 to 69)
I have read sap note [586523|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=586523] but this relates to adding customer defined fields and amending output structures and as the above field is a Sap standard field is it possible someone could give me some advice on how this could be done.
Regards
Gary

Hi,
For IW28:
Create a custom append at the end of structure RIHQMEL_LIST.
Create an implicit enhancement in the SAP programmes that need the new field (that you will have to find out yourself)
Roy

Add fields to report ME55

Hello,
I need to add some fields in reports from transaction ME55
Can anyone give some details to solve this
Thanks

Hello,
I´ve check program RM06BF00 but i don´t see any point in this program to add fields.
i´ve debug RM06BF00 program, it select all data but it display data using this perform:
"PERFORM submit(sapfm06b) USING sucomm."
any idea?

Add fields in VL10 report - EHN

Hi ,
I am supposed to add two fields from Table KNVV-KVGR1/KVGR2 table in to alv report output of VL10/VL10A.
I have tried for BADI but none got trigged. Is.Is the any Badi/Exits available or do I need to go for explict/implicit enhancement.
Kindly help urgent requirement.
Thanks in advance.
Thanks,
D.Dutta.

Hi
Madhu is right. Please, see the coding in include V50R_USEREXITS
* 1. Add field to list-display
* Userexits for additional fields on list display
* use append-structure in DDIC at structure SHP_VL10_ITEM
* and ad field value in one of these routines
*INCLUDE LV50R_VIEWG02.       "POS_ITEM_FILL_USER:       SD/MM-orders
*INCLUDE LV50R_VIEWG03.       "POSTAB_VEPVG_FILL_USER    SD-Index
*INCLUDE LV50R_VIEWG06.       "POSTAB_VETVG_FILL_USER    MM-Index
*INCLUDE LV50R_VIEWG07.       "POSTAB_DELIVERY_FILL_USER Delivery item
Do double click and see the coding. If you are in ECC 6.0, do an implicit. If not, go to SCCR.
I hope this helps you
Regards
Eduardo

Add field dynamically in ABAP Query Report.

Hi All,
Can we add fields dynamically in the ABAP Query Report?
There is a field in my report which should occupy the line only if it has value. But if we drag-drop the filed in the report it automatically occupy the line though it doesn't have value.
Thanks in Advance!!!

hi rohini,
we can add fields dynamically in the ABAP Query Report,in this way we can to,
first of all u create ur selection-screen with all the fields and make the field invisible i.e the one which u want to add dynamically. and based on ur requirement change that invisible to visible and use modify screen.
in this way we can solve.
search for invisible and modify screen in sdn u can get better information and u can understand what i am saying.

How to copy sap standatd report to add fields and to make it work

Hi experts,
Can you tell me how to copy the sap standard report to add fields.
I copied regular way including all includes also, but the porgram not activated and also every field started with %
exp : data %dtab type standard table of /1BCDWB/IQ000000008078 with header line.
Thanks

Local object yes.
I realise you're not an abaper, but if you got one in, he could simply create a subclass of /SAPPSSRM/CL_FY_NUMBER (assuming it's not been made final) and override only the method that needs changing. ( if it is final, then you have to use composition, but again, that's pretty straight forward ). The point is, that copy a class rarely, if ever, needs to be done. That's one of the major points about using classes. If you use subclassing or composition, only small amounts of code need to be copied - which means if SAP change other bits in a new release, you automatically get them, thereby reducing the risk of an upgrade mucking up your cloned class.
I'd be extremely nervous about having any code that had been implemented by a non-developer, being put into productive use.
matt

Add fields to the standard report QM15

i want to add fields to the standard report.
t.code QM15 which display the list of items: selection of notifications.
the fields i want to add are:
1. batch no
2. Sample no
3. Main vendor
please let me know how can i do this. if any one can help me with screenshot doc. this is really helpful.
Thanks

Hi experts,
I have done with the z** creation of the standard report. I also create the z*include for the standard includes which are in the standard program. But I not able to find the fieldcatlog or include where I can add my new fields.
But I tried with one structure tht is standard structure in tht standard report so i make it as z*structure and I append my new fields to this structure. I debug the report and this works fine and also shows output, but at output when I change the layout to see these new fields it shows dump.
Then I tried with one more thing to give the positioning to my new added fields. (This is what u can say column positioning ).
When I execute this,it goes to dump screen.
Now I don't what to do with this.
If any one like to see the code. Plz let me know I will post the code.
Or if any one have any document on this plz share. Or any other solution.
Thanks in advance.
Thanks
Sachin

How to add fields to Structure in Report Painter

Hi All,
We have a requiremnt where we need to add 2 fields ( profit center-PRCTR & description-CEPCT-LTEXT ) to structure CCSS. This structure is attached to library 1VK.
Is it possible to add fields directly to a structure or do I need to create a new structure and attach it to a new library.
If any one of this is possible, how can I do this ?

Hi ,
u can do it in both the ways , but i am not much sure abt second option.
Useful Tcodes are GR21.
Regards
Prabhu

Need to Add field EKET-EINDT and EKET-SLFDT to ME2M Report output in ALV

Hi All,
I need to add fields EKET-EINDT and EKET-SLFDT to the output of program ME2M Transaction.
I have appended the structure MEREP_OUTTAB_PURCHDOC with these fields. and it is coming in the ALV output field catalog.
I need these fields output only for ALV display only.
Please let me know which enhancement i need to write code to enhance the output with these filed values added to the ALV internal table
Thanks in Advance
Arun

Hi All,
I am able to get the field EINDT and SLFDT into the structure using Append structure and is also getting displayed in the output in ALV.
But i need to know how to add code for filling these fields and passing into ALV. I need to know the Enhancement spot.
Please let me know how to achieve this scenario
Thanks
Arun

KSB1 report add fields

Similar Messages

Maybe you are looking for