Ksbsrv error on RAC rdbms

Has any one out there encountered the ksbsrv error :-
'no startup aknowledgement from forked process after 3 mins'
on a windows RAC configuration using 9.2.0.5?
We have had this error on one of our 4 nodes. This rendered the entire database unusable through the application, but the 3 unaffected nodes were accessble through sqplus(beq access?)
The problem was rectified by restarting the effected node, which had high CPU despite the fact that the rdbms was unuasable..we suspect an orphaned process......
We are looking at possible causes as changes in OS, and DB init parameters as causes, as well as poor coding..anything else we should be looking at?
Any other information gratefully received..
Thanks

Have you found a reason for this error.
I'm not using RAC, but occasionally we receive this error
and have to reboot the dataase.
Oracle TAR and research netted, that we should make sure the listener
log never over 200mg. So I've setup a routine to clean out the
listener log while the db is still running 24x7.
oct 3 and again today the database hung with this error and listener.log
was well within the 200mg limits.

Similar Messages

Kbssv error on RAC

Has any one out there encountered the ksbsrv error :-
'no startup aknowledgement from forked process after 3 mins'
on a windows RAC configuration using 9.2.0.5?
We have had this error on one of our 4 nodes. This rendered the entire database unusable through the application, but the 3 unaffected nodes were accessble through sqplus(beq access?)
The problem was rectified by restarting the effected node, which had high CPU despite the fact that the rdbms was unuasable..we suspect an orphaned process......
We are looking at possible causes as changes in OS, and DB init parameters as causes, as well as poor coding..anything else we should be looking at?
Any other information gratefully received..
Thanks

The application connects to one of 4 application servers, each of which creates connection pools on each of the 4 instances on start up.
It was possible to connect through sqlplus, so reason to believe that TNS names is the problem, but the loss of the one instance seems to cause the application to be unable to connect to any other instance.
There is the error in the alert log suggest an os resource error we cannot identify, we do not what has caused run away process that killed the node- could be the resource issue or appplication, and dont really understand why the whole database appears to hang.

Clone RAC RDBMS

Hi Everyone,
We have our first test RAC for Oracle E Business Applications running, we will need to setup the 2nd test environment of EBS on RAC on the same set of servers of first RAC environment.
The second RAC environment is not the clone of the first RAC environment, we will perform the same clone steps from our non-RAC EBS prod environment, just like the way we did the first RAC environment.
We will need to setup the 2nd test environment under the same cluster and ASM structure of 1st RAC environment.
My puzzle is: How to clone 2nd pair of RAC RDBMS under the same cluster of 1st RAC environment ?
As long as we could clone the 2nd pair of RAC RDBMS, then we could perform the same steps in notes 466649.1, to setup 2nd EBS RAC environment under the same cluster.
Please outline the basic steps to achieve this goal.
Thanks

Please refer to these docs.
Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone [ID 559518.1]
Cloning Oracle Applications Release 12 with Rapid Clone [ID 406982.1]
Certified RAC Scenarios for E-Business Suite Cloning [ID 783188.1]
Rapid Clone Documentation Resources, Release 11i and 12 [ID 799735.1]
Thanks,
Hussein

Shared server error in RAC ?

_I changed my RAC database from dedicated to shared server . Then I changed client tnsnames.ora to meet shared server and tried to connect . It worked fine and I could do my job as normal.
But when I connected as sysdba and used (select server from v$session) to verify , there were 1 session NONE and no session SHARED . I tried to connect 5 more session from clients and there were 5 more NONE .
Then I used (select circuit,dispatcher from v$circuit) and there were exact 6 circuits.
_Is this an error in RAC ? Did I fail to convert from dedicated to shared server ?Please help.
My system : RAC10g , OracleEnterpriseLinux5

_This is my tnsnames.ora in client
HTI =
(DESCRIPTION =
(LOAD_BALANCE=yes)
(ADDRESS = (PROTOCOL = TCP)(HOST = dataht1-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = dataht2-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = HTI)
_Clients can connect and work as normal with this tnsnames.ora . But when I try to find out how many sessions are in SHARED mode using (select server from v$session) there is 0 SHARED session althought there are about 20 client connections with the tnsnames.ora . There are 2 type of session when I use (select server from v$session) : NONE and DEDICATED . The more clients connect with the tnsnames , the more NONE sessions are created and no more DEDICATED sessions are created.
_I really don't understand what NONE means !

Permission Denied error on RAC Install Sun SPARC Solaris-NetApps

Our RAC Installation is failing when installing in silent mode the base install of Oracle RDBMS 10.2.0.1. During the process file emtgtctl is copied from node1 to node2. On node1 the file has the following permissions:
-rwsr-s--x (note the user group and set-id "s" is on).
Oracle user is performing the intsall and he is a member of oinstall.
We get the error:
"Permission Denied" and the install fails.
We try and do the copy manually as well and this fails also.
Any one ever run accross something like this?

is oinstall the primary group for that user ?

Error during RAC installation

Dear all,
I am having a big issue when installing oracle RAC on windows 2003 service pack 1. during oracle cluster configuration assistants step an error takes place and the installation terminate
the following is the complete log file data.
Using paramFile: E:\10201_clusterware_win32\clusterware\install\oraparam.ini
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The commandline for unzip:
E:\10201_clusterware_win32\clusterware\install\unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/"*.jar" -d "C:\temp\OraInstall2009-02-02_06-13-03PM"
The commandline for unzip:
E:\10201_clusterware_win32\clusterware\install\unzip -qqq ..\stage\Components\oracle.swd.oui\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\temp\OraInstall2009-02-02_06-13-03PM"
The commandline for unzip:
E:\10201_clusterware_win32\clusterware\install\unzip -qqq ..\stage\Components\oracle.swd.oui.core\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\temp\OraInstall2009-02-02_06-13-03PM"
The number of files bootstrapped for the jre is 584.
The number of files bootstrapped for the oui is 100.INFO: Environment Variables:
INFO:      ORACLE_HOME =
INFO:      PATH = C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
INFO:      CLASSPATH =
INFO: Username:oracle
INFO: Oracle Universal Installer version is 10.2.0.1.0
INFO: Setting variable 'PREREQ_CONFIG_LOCATION' to ''. Received the value from variable association.
INFO: Reader/Writer 'oracle.sysman.oii.oiic.OiicGlobalContextXMLReaderWriter' was created.
INFO:
*** Welcome Page***
INFO: Initializing install inventory
INFO: Setting up install inventory
INFO:
*** Specify Source Location Page***
INFO: Initializing OUI Shiphome access setup
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: fetch the file: E:\10201_clusterware_win32\clusterware\stage/shiphomeinfo.properties
INFO: Performing operation for OUI Shiphome access setup
INFO:
*** Select a Product to Install Page***
INFO: Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.crs, 10.2.0.1.0, >0.0.0.0.0, [ 912 ][OH:1]'. Received the value from the default settings.
INFO:
*** Select Installation Type Page***
INFO: Setting the 'InstallType ( DEP_MODE )' property to 'Complete'. Received the value from the default settings.
INFO: Setting the 'TopLevelInstallType ( TLDepModes )' property to 'Complete'. Received the value from the default settings.
INFO: The selected install type is "Complete".
INFO: install properties filename: C:\temp\OraInstall2009-02-02_06-13-03PM/oracle.crs_Complete.properties
INFO:
*** Specify Home Details Page***
INFO: Setting the 'OracleHome ( ORACLE_HOME )' property to 'E:\oracle\product\10.2.0\crs'. Received the value from the UI page.
INFO: Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OraCr10g_home'. Received the value from the UI page.
INFO: Initializing OUI Oracle Home access setup
INFO: Setting variable 'ORACLE_HOME' to 'E:\oracle\product\10.2.0\crs'. Received the value from the UI page.
INFO: Loading shiphomepropertiesfrom C:\temp\OraInstall2009-02-02_06-13-03PM/shiphomeproperties.xml
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: Setting the PROD_HOME variable of 'oracle.crs_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_crs'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.cfs_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_crs_wincfs'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.crs_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.has.crs'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui.core_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.opatch_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs\OPatch'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.jre_1.4.2.8.0' to 'E:\oracle\product\10.2.0\crs\jre\1.4.2'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.ewt_3.4.38.0.0' to 'E:\oracle\product\10.2.0\crs/ewt'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.help_4.2.6.1.0' to 'E:\oracle\product\10.2.0\crs/help'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.jewt_4.2.33.0.0' to 'E:\oracle\product\10.2.0\crs/jewt'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.share_1.1.18.0.0' to 'E:\oracle\product\10.2.0\crs/oracle_tools_share'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.ice_5.2.3.6.0' to 'E:\oracle\product\10.2.0\crs/ice'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.oem.oemlt_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oemlt'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.buildtools.common_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_buildtools_common'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.buildtools.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_buildtools_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.dbjava.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.dbjava.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.emdw.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.emdw.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.common_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_rsf_has_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ldap.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_ldap_rsf_cmp'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.network.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.network.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.network.rsf.ic_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.network.rsf.ic'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.nlsrtl.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_nlsrtl_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.nlsrtl.rsf.lbuilder_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_nlsrtl_rsf_lbuilder'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ons_10.1.0.3.0' to 'E:\oracle\product\10.2.0\crs/opmn'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.oracore.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.oracore.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.perlint_5.8.3.0.2' to 'E:\oracle\product\10.2.0\crs\perl'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.precomp.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_rsf_precomp_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.crs_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rsf_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.rdbms.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rsf.ic_10.2.0.1.0' to 'E:\oracle\product\10.2.0\crs/oracle.rdbms.ic'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rsf_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.rsf Product Location: Empty path specified.

*** Specify Local Host Name Page***
INFO: Setting the 'HostName ( ORACLE_HOSTNAME )' property to 'racdbsrv1.bog.gov.sa'. Received the value from the default settings.
INFO: Defaulting prerequisite location to 'E:\10201_clusterware_win32\clusterware\stage/prereq'.
INFO:
*** Product-Specific Prerequisite Checks Page***
INFO: Entry point:oracle.crs_Complete_install
INFO: Starting Prerequisite checks : Mon Feb 02 18:13:28 AST 2009
INFO: Checking CertifiedVersions
     This is a prerequisite condition to test whether the Oracle software is certified on the current O/S.
INFO: Expected result: One of 5.0,5.2
Actual Result: 5.2
Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking ServicePackChecks
     This is a prerequisite condition to test whether the Service Pack level recommended for installing the product is available on the system.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking TotalMemory
     This is a prerequisite condition to test whether the system has sufficient physical memory.
INFO: Expected result: 256MB
Actual Result: 2047MB
Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking CompatibilityChecks
     This is a prerequisite condition to check whether the Oracle Home specified by the user already contains an installed product which is incompatible with the product being installed.
INFO: Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking OracleHomeSpace
     This is a prerequisite condition to check whether the specified Oracle Home contains any spaces in the path.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking InstallOnRoot
     This is a prerequisite condition to test whether installation is done at the root of a drive.
INFO: Checking the ORACLE HOME.... :E:\oracle\product\10.2.0\crs
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking Detectnverify92RAC
     This is a prerequisite condition to check whether all the selected nodes are part of the existing Oracle 9.2 RAC.
INFO: hostNameFromIpAddr :racdbsrv1.bog.gov.sa
INFO: hostName :racdbsrv1
INFO: Identifying windows system directory :C:\WINDOWS\system32
INFO: is92Cluster State:false
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking Detectnverfiy10iSI
     This is a prerequisite condition to check if local CSS is shutdown and deconfigured on all the nodes of the cluster.
INFO: hostNameFromIpAddr :racdbsrv1.bog.gov.sa
INFO: hostName :racdbsrv1
INFO: is92Cluster state :false
INFO: Reg Key exists status:false
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking ExistingEnvChecks
     This is a prerequisite condition to ensure that ORACLE_HOME, ORACLE_SID, ORACLE_CRS_HOME variables are not set in the environment.
INFO: Checking Oracle home from the env... :
INFO: Checking Oracle Sid from the env...:
INFO: Checking Oracle CRS home in the env.... :
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Prerequisite checks completed : Mon Feb 02 18:13:29 AST 2009
INFO: *** Entering Component: oracle.crs installation
INFO: Setting variable 'sl_votedrivelist' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_vipHosts' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_tableListClone' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_selectedNodes' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_publicNodeNames' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_pubNodes' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_privatenamelist' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_privateNodeNames' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_nodenumberlist' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_hostnames' to ''. Received the value from the variable calculation.
INFO: Calling Query ClusterQueries10.2.0.1.0 PrivIntr
INFO: Query Returned: public 10.10.10.0 PRIVATE 255.255.255.0,Local Area Connection 5 169.254.0.0 UNKNOWN 255.255.0.0,priv1 192.168.0.0 PRIVATE 255.255.255.0,Local Area Connection 4 169.254.0.0 UNKNOWN 255.255.0.0,priv2 192.168.0.0 PRIVATE 255.255.255.0,Local Area Connection 2 169.254.0.0 UNKNOWN 255.255.0.0
INFO: Setting variable 'sl_defaultPrivIntrList' to 'public:10.10.10.0:2:255.255.255.0,Local Area Connection 5:169.254.0.0:1:255.255.0.0,priv1:192.168.0.0:2:255.255.255.0,Local Area Connection 4:169.254.0.0:1:255.255.0.0,priv2:192.168.0.0:2:255.255.255.0,Local Area Connection 2:169.254.0.0:1:255.255.0.0'. Received the value from the variable calculation.
INFO: Setting variable 'sl_VDSKPartitionsOnRAW' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_VDSKDisksOnRAW' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_PrivIntrColHeaders' to 'Interface Name,Subnet,Interface Type'. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionNumberOH' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionNumberDF' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionAndSpaceVDSK' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionAndSpaceSelectedVDSK' to ',0,0,20'. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionAndSpaceSelectedOCR' to ',0,0,100'. Received the value from the variable calculation.
INFO: Setting variable 'sl_PartitionAndSpaceOCR' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_OHPartitionsAndSpace' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Setting variable 'sl_OHPartitionAndSpaceSelected' to ',0,0,3072'. Received the value from the variable calculation.
INFO: Setting variable 'sl_OHDrives' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_OHDriveSelected' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_IntrNames' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_IntrChoices' to 'Public,Private,Do Not Use'. Received the value from the variable calculation.
INFO: Setting variable 'sl_HostList' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_Drives' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_DiskNumberOH' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_DiskNumberDF' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_DFPartitionsAndSpace' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_DFPartitionAndSpaceSelected' to ',0,0,3072'. Received the value from the variable calculation.
INFO: Setting variable 'sl_DFDrives' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_DFDriveSelected' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_ConfigTypes' to 'Oracle Home and Datafiles,Select this configuration if your shared drives has enough space for Oracle software and database datafiles. Choosing this option will place the Oracle Cluster Registry (OCR) and the Cluster Synchronization Services (CSS) voting disk on the same drive as the datafiles.,Oracle Home ONLY,Select this configuration if your shared drive has only enough space for your Oracle software. You will be asked to specify two raw devices later, one for the Oracle Cluster Registry (OCR) and the Cluster Synchronization Services (CSS) voting disk.,Datafiles ONLY,Select this configuration if you want multiple copies of your Oracle software, one per instance.,Neither,Select this configuration if your non-shared drive has only enough space for your Oracle Clusterware software.
You will be asked to specify two raw devices later, one for the Oracle Cluster Registry (OCR) and the Cluster Synchronization Services (CSS) voting disk.'. Received the value from the variable calculation.
INFO: Setting variable 'sl_92NodeNos' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_92NodeList' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_votedsk' to 'votedsk'. Received the value from the variable calculation.
INFO: Setting variable 's_votedisklist' to ''. Received the value from the variable calculation.
INFO: Calling Query globalVarQueries2.1.0.4.1 getGlobalVariable
variable = oracle.installer.NatLibDir
INFO: Query Returned: C:\temp\OraInstall2009-02-02_06-13-03PM\
INFO: Setting variable 's_tmpDirLocation' to 'C:\temp\OraInstall2009-02-02_06-13-03PM\'. Received the value from the variable calculation.
INFO: Setting variable 's_svrConfigLocFileName' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_storageTypeVdsk' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Setting variable 's_storageTypeOcr' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Setting variable 's_srvconfig_loc' to 'srvconfig_loc'. Received the value from the variable calculation.
INFO: Setting variable 's_srvcfgMirr' to 'ocrmirrorcfg'. Received the value from the variable calculation.
INFO: Setting variable 's_srvcfg' to 'ocrcfg'. Received the value from the variable calculation.
INFO: Calling Query globalVarQueries2.1.0.4.1 getGlobalVariable
variable = oracle.installer.silent
INFO: Query Returned: false
INFO: Setting variable 's_silent' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 's_setif' to 'setif -global '. Received the value from the variable calculation.
INFO: Setting variable 's_script3' to 'rootdeinstall.sh'. Received the value from the variable calculation.
INFO: Setting variable 's_script2' to 'rootdelete.sh'. Received the value from the variable calculation.
INFO: Setting variable 's_script1' to 'rootdeletenode.sh'. Received the value from the variable calculation.
INFO: Setting variable 's_responseFile' to 'default'. Received the value from the variable calculation.
INFO: Setting variable 's_rawDeviceName' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_quorum' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_pubNodeNum' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_path' to ''. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.1.0.3.0 getOSName
INFO: Query Returned: NT_X86
INFO: Setting variable 's_operatingSystem' to 'NT_X86'. Received the value from the variable calculation.
INFO: Setting variable 's_onsnodelist' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_ocrLocFileName' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_nodevips' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_nodelist' to ''. Received the value from the variable calculation.
INFO: Calling Query LangQueries1.3.6.4 GetNlsLang
INFO: Query Returned: AMERICAN_AMERICA.WE8MSWIN1252
INFO: Setting variable 's_languageid' to ''AMERICAN_AMERICA.WE8MSWIN1252''. Received the value from the variable calculation.
INFO: Calling Query areasQueries10.2.0.1.0 getProductHome
name = oracle.jdk
startVersion = 1.4.1
endVersion = 9.9.9
acceptCompatible = null
INFO: Query Returned: E:\oracle\product\10.2.0\crs\jdk
INFO: Setting variable 's_jreLocation' to 'E:\oracle\product\10.2.0\crs\jdk\jre\'. Received the value from the variable calculation.
INFO: Setting variable 's_hostnamelist' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_finalIntrList' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_endOfInstallMesg' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_dirPermissions' to '775'. Received the value from the variable calculation.
INFO: Setting variable 's_cvuNodelist' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_clustername' to 'crs'. Received the value from the variable calculation.
INFO: Setting variable 's_clusterNodes' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_allocationUnitOH' to '4'. Received the value from the variable calculation.
INFO: Setting variable 's_allocationUnitDF' to '1024'. Received the value from the variable calculation.
INFO: Setting variable 's_addFlag' to 'add_config'. Received the value from the variable calculation.
INFO: Setting variable 's_VdskMirrorNotReqd' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Setting variable 's_PartitionNumberVDSK' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_PartitionNumberOH' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_PartitionNumberOCRMirr' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_PartitionNumberOCR' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_PartitionNumberDF' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_OHDriveSelected' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_OCRdeviceList' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_JavaFlag' to '-Dsun.java2d.noddraw=true'. Received the value from the variable calculation.
INFO: Setting variable 's_IntrIps' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Setting variable 's_InstCrsVer' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DiskNumberVDSK' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DiskNumberOH' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DiskNumberOCRMirr' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DiskNumberOCR' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DiskNumberDF' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DFMirrorDriveSelected' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_DFDriveSelected' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_CfsOcrRoot' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_CfgTypeRet' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_CSS' to 'OracleClusterPreinstService'. Received the value from the variable calculation.
INFO: Setting variable 's_92CFSLocation' to ''. Received the value from the variable calculation.
INFO: Setting variable 'ret_PrivIntrList' to 'NO_VALUE'. Received the value from the variable calculation.
INFO: Setting variable 'n_storageTypeVDSK' to '1'. Received the value from the variable calculation.
INFO: Setting variable 'n_storageTypeOCR' to '1'. Received the value from the variable calculation.
INFO: Setting variable 'n_NTvdskCounter' to '0'. Received the value from the variable calculation.
INFO: Setting variable 'n_Choice' to '0'. Received the value from the variable calculation.
INFO: Setting variable 'b_win92' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_votingdiskfirsttime' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_validateOnce' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_removedClusterPreinstService' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_ocrpartitionfirsttime' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_launchConfig' to 'true'. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.1.0.3.0 isCurrentPlatformInGroup
platGroup = WINDOWS
INFO: Query Returned: true
INFO: Setting variable 'b_isWindows' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_isVdskRAW' to 'false'. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.1.0.3.0 isCurrentPlatformInGroup
platGroup = UNIX
INFO: Query Returned: false
INFO: Setting variable 'b_isUNIX' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isOCRPrimaryOnRAW' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isOCRMirrorOnRAW' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isNonCFS' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isCluster' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isCFS' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_flag' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_firsttime' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_emptyFlag' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_displayWinStorageDlg' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_WinDeinst' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_VipListFirstTime' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_VdskRAW' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_VdskCFS' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_Use92Cfs' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_StartedClusterPreinstService' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_StartClusterServiceFirstTime' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_StartClusterPreinstService_retval' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_ServiceRunning' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_ServiceFound' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_PrivNameListFirstTime' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_OhOnlyOnCFS' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_OcrRaw' to 'false'. Received the value from the variable calculation.
INFO: Calling Query fileQueries10.1.0.2.0 exists
filename = /var/opt/oracle/srvConfig.loc
INFO: Query Returned: false
INFO: Setting variable 'b_DisplayOcrDialog' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_DebugFlag' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_CssStillRunning' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_CssAlreadyStopped' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'bRAC9_2_exists' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'bRAC10i_exists' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'CLUSTER_CONFIGURATION_FILE' to ''. Received the value from the variable calculation.
INFO: Setting variable 'sl_OHPartitionsAndSpace_valueFromDlg' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query WindowsGeneralQueries10.2.0.0.0 getWindowsSystemDirectory
INFO: Query Returned: C:\WINDOWS\system32
INFO: Setting variable 's_windowsSystemDirectory' to 'C:\WINDOWS\system32'. Received the value from the variable calculation.
INFO: Setting variable 's_usergroup' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_policyFile' to '-Djava.security.policy="E:\oracle\product\10.2.0\crs\srvm\admin\srvm.policy"'. Received the value from the variable calculation.
INFO: Setting variable 's_orahomeSwitch' to '-orahomeE:\oracle\product\10.2.0\crs'. Received the value from the variable calculation.
INFO: Setting variable 's_jreBin' to 'E:\oracle\product\10.2.0\crs\jdk\jre\\bin'. Received the value from the variable calculation.
INFO: Setting variable 's_hostname' to 'racdbsrv1.bog.gov.sa'. Received the value from the variable calculation.
INFO: Setting variable 's_WinDeinst' to 'del -nn '. Received the value from the variable calculation.
INFO: Calling Query areasQueries10.2.0.1.0 productInstalled
location = E:\oracle\product\10.2.0\crs
name = oracle.crs
startVersion = 10.1.0.0.0
endVersion = 99.9.9.9.9
acceptCompatible = false
INFO: Query Returned: false
INFO: Setting variable 'b_isUpgrade' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'b_isShared' to 'true'. Received the value from the variable calculation.
INFO: Setting variable 'b_isLinux' to 'false'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getHostIPAddress
INFO: Query Returned: 10.10.10.31
INFO: Calling Query netQueries10.2.0.1.0 getHostNameForIPAddress
ipAddress = 10.10.10.31
INFO: Query Returned: racdbsrv1.bog.gov.sa
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Calling Query ClusterQueries10.2.0.1.0 getClusterState
nodeName = racdbsrv1
INFO: Query Returned: 0
INFO: Setting variable 'b_CoExist' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'OwnerId' to 'Administrator'. Received the value from the variable calculation.
INFO: Setting variable 'ORA_CRS_HOME' to 'E:\oracle\product\10.2.0\crs'. Received the value from the variable calculation.
INFO: Setting variable 's_windowsCommandLine' to 'C:\WINDOWS\system32\cmd /c call '. Received the value from the variable calculation.
INFO: Setting variable 's_vipcaClasspath' to '";E:\oracle\product\10.2.0\crs\jlib\srvm.jar;E:\oracle\product\10.2.0\crs\jlib\srvmhas.jar;E:\oracle\product\10.2.0\crs\srvm\jlib\vipca.jar;E:\oracle\product\10.2.0\crs\jlib\ewt3.jar;E:\oracle\product\10.2.0\crs\jlib\jewt4.jar;E:\oracle\product\10.2.0\crs\jlib\share.jar;E:\oracle\product\10.2.0\crs\jlib\oracle_ice.jar;E:\oracle\product\10.2.0\crs\jlib\oemlt-10_1_0.jar"'. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.1.0.3.0 getenv
name = TMPDIR
INFO: Query Returned:
INFO: Calling Query generalQueries10.1.0.3.0 getenv
name = TEMPDIR
INFO: Query Returned:
INFO: Calling Query generalQueries10.1.0.3.0 getenv
name = TEMP
INFO: Query Returned: C:\temp
INFO: Setting variable 's_tmpDir' to 'C:\temp'. Received the value from the variable calculation.
INFO: Setting variable 's_cvuClassPath' to '"E:\oracle\product\10.2.0\crs\jlib\srvm.jar;E:\oracle\product\10.2.0\crs\jlib\cvu.jar;E:\oracle\product\10.2.0\crs\jdk\jre\lib\rt.jar"'. Received the value from the variable calculation.
INFO: Setting variable 'b_launchVIPCA' to 'true'. Received the value from the variable calculation.
INFO: Calling Query ClusterQueries10.2.0.1.0 IsItVendor
INFO: Query Returned: false
INFO: Setting variable 'b_isVendor' to 'false'. Received the value from the variable calculation.
INFO: Setting variable 'sl_tableList' to 'NULL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName =
INFO: Query Returned:
INFO: Calling Query netQueries10.2.0.1.0 getIPAddressForHostName
hostName =
INFO: Query Returned: 127.0.0.1
INFO: Calling Query netQueries10.2.0.1.0 getHostNameForIPAddress
ipAddress = 127.0.0.1
INFO:
Query Exception: UnknownHostException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
INFO: Error getting hostname for the given IP address.
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName = Error getting hostname for the given IP address.
INFO: Query Returned:
INFO: Setting variable 'sl_nodeNames' to ''. Received the value from the variable calculation.
INFO: Setting variable 's_OcrVdskMirror1RetVal' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Setting variable 's_ocrpartitionlocation' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Setting variable 's_ocrMirrorLocation' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Setting variable 's_votingdisklocation' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Setting variable 's_VdskMirror2RetVal' to 'NO_VAL'. Received the value from the variable calculation.
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Calling Query ClusterQueries10.2.0.1.0 getClusterState
nodeName = racdbsrv1
INFO: Query Returned: 0
INFO: Setting variable 'sl_HostList' to 'racdbsrv1.bog.gov.sa'. Received the value from a code block.
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: bog.gov.sa
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: bog.gov.sa
INFO: Calling Query ClusterQueries10.2.0.1.0 PrivNodeName
nodeName = racdbsrv1.bog.gov.sa
PathName = E:\oracle\product\10.2.0\crs
INFO: Query Returned:
INFO: Setting variable 'sl_HostList' to 'racdbsrv1.bog.gov.sa,racdbsrv1-priv.bog.gov.sa'. Received the value from a code block.
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: bog.gov.sa
INFO: Calling Query netQueries10.2.0.1.0 getMachineName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: racdbsrv1
INFO: Calling Query netQueries10.2.0.1.0 getDomainName
hostName = racdbsrv1.bog.gov.sa
INFO: Query Returned: bog.gov.sa
INFO: Setting variable 'sl_HostList' to 'racdbsrv1.bog.gov.sa,racdbsrv1-priv.bog.gov.sa,racdbsrv1-vip.bog.gov.sa'. Received the value from a code block.
INFO: Calling Query ClusterQueries10.2.0.1.0 getCssInfo

Error during link rdbms on suse:hidden symbol _fixunssf referenced by DSO

I can't install Oracle 8.1.7 on SUse 9, encountering the following problem in make step :
/usr/lib/gcc-lib/i586-suse-linux/3.3.1/../../../../i586-suse-linux/bin/ld: /opt/
oracle/ora817/rdbms/lib/oracle: hidden symbol `__fixunssfdi' in /usr/lib/gcc-lib
/i586-suse-linux/3.3.1//libgcc.a(_fixunssfdi.oS) is referenced by DSO
collect2: ld returned 1 exit status
make: *** [opt/oracle/ora817/rdbms/lib/oracle] Error 1
I know some other people also had this issue; but has someone a clue for this ? LD_ASSUME_KERNEL don't solve it.

I have exactly the same problem. The researching of this error showed that if you change ld and libbfd.so to version lower than 2.14 it's works ok. But actually I want to startup Oracle without any changing in the system.
Do somebody know how to setup ld or gcc or something else for fix this problem?

Error on the RDBMS BEA EIS adapter in WLI 8.1

Hi,
I'm using the RDBMS WebLogic adapter for RDBMS EIS and I can create 'application
views' which perform correct operations on the EIS such as "create new entry"
in the database, "delete entries" (using SELECT and DELETE sql commands ) but
I permanently get the error listed below when I use UPDATE queries in the Service
I implement on the RDBMS adapter.
Has anyone seen this before ? Sorry if the question was answered before but I
don't find any error like this one in any BEA newsgroup.
Best regards
Yves
java.rmi.ServerError: A error occurred the server; nested exception is:
     weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ cannot unmarshaling
throwable ] - with nested exception:
[java.io.NotSerializableException: com.metamata.parse.Token]
     at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:201)
     at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:284)
     at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:244)
     at __v1_AppViewOpenNapServer.AppViewOpenNapServer_gp978f_EOImpl_811_WLStub.invokeService(Unknown
Source)
     at com.bea.wlai.client.ApplicationView.invokeService(ApplicationView.java:842)
     at jsp_servlet.__testrslt._jspService(__testrslt.java:371)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
     at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:594)
     at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:409)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:155)
     at jsp_servlet.__display._jspService(__display.java:659)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6310)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Caused by: weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ cannot
unmarshaling throwable ] - with nested exception:
[java.io.NotSerializableException: com.metamata.parse.Token]
     at weblogic.rmi.internal.ServerRequest.unmarshalThrowable(ServerRequest.java:335)
     at weblogic.rmi.internal.ServerRequest.getThrowable(ServerRequest.java:59)
     at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:184)
     ... 24 more

Hi Lakshman,
I use the standard PointBase server provided with the BEA 8.1 platform.
Here is an attachment which details all the tests and the error reported by the
WLI8.1.
The different SQL requests are detailled as well as the XML generated files.
Thanks for your help.
Best regards,
Yves
"Lakshman Varma" <[email protected]> wrote:
>
Hi Yves,
This is Lakshman from BEA Adapter Support Team,now i am trying to simulate
the
problem which you were getting.
Can you provide me some more information that will help me to resolve
this problem.
a)Which Data base you were using(version also)?
b)The update statement which was throwing exception
c)RDBMS Adapter log file which is located in your domain(latest logfile
with the
exception you were getting).
and anything you feel that may help me to resolve this problem.
Thanks And Regards
Lakshman Varma
BEA Adapter Support Engineer
BEA Syatems
"Yves Leaute" <[email protected]> wrote:
Hi,
I'm using the RDBMS WebLogic adapter for RDBMS EIS and I can create'application
views' which perform correct operations on the EIS such as "create new
entry"
in the database, "delete entries" (using SELECT and DELETE sql commands
) but
I permanently get the error listed below when I use UPDATE queries in
the Service
I implement on the RDBMS adapter.
Has anyone seen this before ? Sorry if the question was answered before
but I
don't find any error like this one in any BEA newsgroup.
Best regards
Yves
java.rmi.ServerError: A error occurred the server; nested exceptionis:
     weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ cannot
unmarshaling
throwable ] - with nested exception:
[java.io.NotSerializableException: com.metamata.parse.Token]
     at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:201)
     at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:284)
     at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:244)
     at __v1_AppViewOpenNapServer.AppViewOpenNapServer_gp978f_EOImpl_811_WLStub.invokeService(Unknown
Source)
     at com.bea.wlai.client.ApplicationView.invokeService(ApplicationView.java:842)
     at jsp_servlet.__testrslt._jspService(__testrslt.java:371)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
     at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:594)
     at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:409)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:155)
     at jsp_servlet.__display._jspService(__display.java:659)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6310)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Caused by: weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[
cannot
unmarshaling throwable ] - with nested exception:
[java.io.NotSerializableException: com.metamata.parse.Token]
     at weblogic.rmi.internal.ServerRequest.unmarshalThrowable(ServerRequest.java:335)
     at weblogic.rmi.internal.ServerRequest.getThrowable(ServerRequest.java:59)
     at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:184)
     ... 24 more
[bea_report.txt]

Temporary tablespace Full error 10g RAC.

Hi All,
Can any one help me in below problem.
After migrating one of database from single node to two node RAC database. we are facing temporary tablespace full problem. The database previously have 2 GB of temporary tablespace but after moving to RAC enviornment it is filling 32 GB of space and still generate error.
Thanks & Regards
Shailendra Wanjari

FIND OUT WHO IS USING THAT TEMP.. I USE WHEN I SEE TEMP IS BEING EATEN UP...
column tablespace format a12
column username format a12
break on username nodup skip 1
select se.username
,se.sid
,su.extents
,su.blocks * to_number(rtrim(p.value)) as Space
,tablespace
,segtype
from v$sort_usage su
,v$parameter p
,v$session se
where p.name = 'db_block_size'
and su.session_addr = se.saddr
order by se.username, se.sid
/

Backup Error in RAC?

Hi friends
i have 2 node RAC running on Windows 2003 Enterprise Edition.
when i am taking backup of archivelog from one node i got following error
RMAN> backup archivelog all;
Starting backup at 16-JUN-07
current log archived
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=462 instance=gad1 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=470 instance=gad1 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 06/16/2007 13:48:54
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\GAD\ARCHIVELOG\2007_06_16\O1_MF_
2_2965_3775WOWB_.ARC
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
the file showing error is on the other node.
what is the problem?
pls help me its a Live server.

Sohil,
In RAC you have to understand the whole purpose of is to have high availability, which meant that you should be able to run the show from either of the nodes.. Which also means that you can run backup from either of the nodes or restore the database from either of the nodes. Hence you have the option of storing your backup to tape or flash recovery area, which should be shared.
If there is a possibility, why don't you add an ASM instance and create a flash recovery area by adding another RAW volume, which would be visible to both hosts and your problem is solved.
Regards
G

Error Upgrading RAC 10.2.0.3 on Windows 32bit

Hey all,
I was in the processes of upgrading a 3 node RAC running on Windows 2003 Server and had a bit of an issue:
First, the Clusterware upgrade worked fine (no thanks to the patch instructions but anyway)
Second, I verified the entire RAC still worked with the new Clusterware by rebooting everything. All looked well.
Third, I started the instrcutions to actually patch the RAC instances and database.
- stopped the services as per the README
- stopped ASM, nodeapps, etc...
(basically everyhting was down on each node)
- launched the OUI on one of the RAC nodes
- chose the Oracle Home
- The OUI autoselected all of my RAC nodes for patching (which is OK - thats what I wanted)
- It started to deploy the files abd at 80% or so, it said "certain files are in use by a service..."
At this point, I verified that NO Oracle services were running (unless you count the OUI Java process).
Attempted to hit "Retry" (I know...I know...) and that didn't work.
Other patches have worked pretty well, this is a first for me.
So....any thoughts? Is it possibly something in Windows that I need to shut down?
Any help would be great.
Thanks

Why dont you run Process Explorer and see which process is accessing your oracle files?
You can get it from http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
Once i had this problem while upgrading on NT and OUI threw error asthe files are being used and later found that some product from CA to scan the machine was keeping one of the oracle file. Killed that CA stuff and resumed the upgradation.
HTH,
JJ

NETCA listener configuration error for RAC database

Hi,
WE have a RAC setup on 2 nodes and now we want to change the default listener port for RAC database.
Database ver: 10.2.0.4
We now that srvctl does not work to add listener manually to CRS.
We are now using netca to create new listener on both the RAC nodes but it gives error throwing :
Problem in configuration : Node(S): hostname
Try again...
When we try to start the listener say listener_I it throws following error:
Problem in configuration :node1
Listener start to failed:Listener may already be running
CRS-0215:Could not start resource
This is urgent
any help is appreciated.
Regards,
Milan

user12073248 wrote:
How you fix it? write to [email protected]
Hi Mauricio,
In this forum we help for free regardless of priority.
First you try to help in the forum if the author of the post request your e-mail you give to him.
Hope you understand it.
Thanks in advance for doing your part to make this community as valuable as possible for everyone!
Levi Pereira

ORA-12545 error in rac, local&remote listener

Hi,
We have an 10g Release 2 RAC system. We usually take
ORA-12545 Connect failed because target host or object does not exist tips
error message. I think tnsnames.ora file is correct, I can achieve to send tnsping message. And I think the host file is alaso correct, I am successful to send ping message to the ip in the host file. And we are noticed that cpu utilization of one RAC node is very bad. Do you that these two problem can be related? I searched the error message on internet. I think this link is interesting:
http://www.ardentperf.com/2007/04/02/local_listener-and-ora-12545/
But I do not fully understand the article. Because I do not know the local&remote listeners.
Can you help me?

12545, 00000, "Connect failed because target host or object does not exist"
// *Cause: The address specified is not valid, or the program being
// connected to does not exist.
// *Action: Ensure the ADDRESS parameters have been entered correctly; the
// most likely incorrect parameter is the node name. Ensure that the
// executable for the server exists (perhaps "oracle" is missing.)
// If the protocol is TCP/IP, edit the TNSNAMES.ORA file to change the
// host name to a numeric IP address and try again.While logged onto the target system issue the following commands:
lsnrctl status
lsnrctl service
CUT commands & results and PASTE back here
Generate another error & then CUT the last 20 - 30 records from listener.log & PASTE back here

Database Installation Error in Rac installation

Hi,
I am installing RAC in my laptop using vmware. Linux is the OS. After the configuration of the clusterware and vipca I try to install database in my machine.Firstly I Installed automatic storage management. then I install database but in this installation area I got a message from the last steps. ie. at the time of configuring database configuration assistant, it shows a failed message and also gives a message box that discribe "ASM sysdba password is invlid".
I give the sys password for ASM at the time of ASM installation only.So what is the reason for this error, an how resolve this problem. Please help...
Thanks
Shiju

Hi,
Browse the following (in order of appearance):
Incorrect Password Message
http://blog.gridapp.com/2007/08/31/password-device-fun/
Recovering Lost SYSDBA Password
http://neworacledba.blogspot.com/2008/11/recovering-lost-sysdba-password.html
Hope this helps.
Regards,
Naveed.

OCFS installation error for RAC

Hi !
I am trying to install RAC 10g(Rel.1) on the VMware for testing purpose.But some problems here-
Linux Server kernel is -
#uname -r
2.4.22-1.2115.nptlsmp
(Note: This is from Fedora Core 1 )
To install OCFS , I have downloaded -
a) ocfs-support-1.0.10-1.i386.rpm
b) ocfs-support-1.1.5-1.i386.rpm
c) ocfs-tools-1.0.10-1.i386.rpm
d) ocfs-2.4.21-EL-1.0.13-1.i686.rpm
e) ocfs-2.4.21-EL-1.0.14-1.i686.rpm
f) ocfs-2.4.21-EL-smp-1.0.13-1.i686.rpm
g) ocfs-2.4.21-EL-smp-1.0.14-1.i686.rpm
All of the above mentioned have tried, but the error mess. is
"Checking for Red Hat enterprise Kernel:[FAILED]"
WHAT IS THE CORRECT .RPMS I HAVE TO DOWNLOAD FOR THIS TEST SERVER.IS THERE ANY WORKAROUND FOR THIS?????
I am following the Oracle-on-linux VMware cookbook.
Thanks in advance.

Hi @Pat93561
After researching the error you are seeing I found a few helpful resources, let's first take a look at the following post by SuperMario1 (Retired); Call to Driver Package Error - Nine Possible Solutions that have Resolved this Issue!
Please let me know if one of these solutions does indeed resolve the issue, or if you require further assistance.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Ksbsrv error on RAC rdbms

Similar Messages

Maybe you are looking for