Ksenija Pretraživanje Slike Karte Gmail Disk Kalendar Prevoditelj Blogger Više ksenija josipovic Dijeli ksenija josipovic ksenija josipovic Prevoditelj Greetings from the Croatian, please help me

Greetings from the Croatian, please help me, I applied, create an account, but they keep telling me to confirm the account with your support, and we simply do not succeed, do not let me go to the store, or iTunes, so I can not download application, please tell me where I'm wrong, thanks a lot
Novo! Držite pritisnutu tipku Shift, kliknite i povucite riječi prema gore kako biste ih preuredili. Ukloni
Google Prevoditelj za tvrtke:Translator ToolkitPrevoditelj web-lokacijaGlobalna tražilica tržišta
Isključi neposredan prijevodO usluzi Google PrevoditeljMobilni uređajiPrivatnostPomo

Similar Messages

TS1463 What is the easiest way to restore my ipod back to factory specs. It has a red circle with a red x in the middle,please help me to fix my ipod, until now i can't use my ipod..i tried all the procedures in Restore ipod from disk mode but still not w

What is the easiest way to restore my ipod back to factory specs. It has a red circle with a red x in the middle,please help me to fix my ipod, until now i can't use my ipod..i tried all the procedures in Restore ipod from disk mode but still not working, please help me...

If you are unable to get the iPod into Disk Mode to try and restore it, it's a very good indication, as mentioned in the article, that the iPod's hard drive is damaged and in need of replacement either by Apple or a third party repair company.
B-rock

Disk repair failed how can I back up my files when I can't boot from the start up disk

When disk repair fails, and I can't boot from the hard drive how can I get to my files to back them up. I have a seagate 1 TB connected to the USB port.

Perubbit,
which model MacBook Pro do you have, and which version of OS X is installed on it?

TS3276 Why is the Mail app mixing up my Yahoo and Gmail accounts? I am receiving mail in each account that appears to have "crossed over" from the other account.

I have Mail set up with 2 different accounts (1 Yahoo and 1 Gmail). I am missing messages in my Yahoo account that all of a sudden appear in my Gmail account. I thought Mail was suppose to keep these accounts separate. There is nothing to connect the 2 accounts. (I am not accidentaly sending out e-mails using the wrong account) Is there anything I can do to fix this? Thank you!

Have you done this: Mail >> Preferences >> Accounts >> Accountinformation >> uncheck gmail Account 2.
Or remove gmail Account 2 at all from the MacBook by clicking on the minus sign.

Hello All: ) I have video of a child who is very sick on my black berry and I want to get burn to a disk for his mom yet when I try to use my Dell laptop it will not recognize it PLEASE help any one before his time is to late :.(

Please its very important I get his family this Video from my Crackberry phone to a computer disk. I am trying to use Windows DVD Maker with DVD+r disks. Video is of his best friend trying to come to grip with his up coming voyage back to our father's Home (( to politely say it.
To God be the Glory, for through him all things become possible!

Hy and welcome to the forum
Now where is that video stored means on memory card. If yes then there are two ways to get this to your PC
1.    Plug out the memoy card from the BB and use a card reader to read the contents of the Card
2.    Use desktop manager. Means install the Desktop Mananger. Plug your BB to the PC using cable. Wait for the pc to finish installation. Now Say yes for mas storage. And open the driver mounted to the PC (Go to My Computer to see that drive) and copy th video.
Now to burn it on the DVD. This can be done using various ways
I recomend this time only two softwares fo you
1.   Windows Movie Maker
2.   Nero
The first one is the builtin software for windows and the second one is very excellent. Because it has many features. I use 9 or later fo these tricks. You must have a DVD writer drive installed on your PC and have a DVD disk either recordale or rewritable.
Need any help please let me know

My CS4 Design Standard disk is corrupt so I downloaded CS4 design premium from the website only to find it doesn't recognise my serial number. There doesn't appear to be an option to download Design Standard on the site, please help??

Where can I download CS$ design standard from as my disk is corrupt and on the Adobe site it only shows design premium and my serial number isnt recognised

Design Standard is available thru the following page in the Adobe site:
CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

My iMac will not boot up from the Leopard upgrade disk nor will it eject it.

My iMac is very slow and sluggish. Followed online instructions to use the Disk Utility to run repair. After doing so it told to reboot my system from the install disk and then run the Disk Uitility to run repair from it. I put in my Leopard upgrade disk and tried to reboot. I get the chime and the Apple logo and hear the disk trying to be read, but after about 5 minutes my iMac shuts completely off. I have tried to eject the disk using all the methods found in the community and nothing works. I want to try my orignal Mac OS X install disk to see if that works. My computer is about a 2007 model. It worked great until just a couple days ago. Frankly I can't afford to take it in so I will have to figure this out on my own with your help. :-(

I cannot open terminal. When booting I get the gray screen with the Apple logo and the twirling comb goes for a while and shut the computer completely off.
I got into the single-mode user and learned the following: disk1s3: I/O error. SAM Multimedia: Read & Write failed, SENSE_KEY = 0x03, ASC = 0x02m ASCQ = 0x00.
Singleuser boot -- fsck not done
Root device is mounted read-only.
If you want to make modifcations to files: /sbin/fsck -fy
/sbin/mount -uw /
I typed in the drutil eject and got:
SAM Multimedia: Read & Write failed, SENSE_KEY = 0x03, ASC = 0x02m ASCQ = 0x00.
Library not loaded. Reason: not suiteable image found.
It did find:
/system/library/rivateframeworks/installserver.framwork/versions/a/installserver : unknown file type, firfst eight bytes: 0xCA 0xfe 0xba 0xbe 0x00 0x00 0x00 0x04 Trace/BPT trap.
I have tried holding the left mouse key, the eject key and nothing happens. To bad I can't pull the
thing out with tweezers.
So where do I go from here?

Disk won't burn, weird message. Please Help!

Whenever I try to burn a disk, it starts, and then ejects it with a message that says, "The attempt to burn a disc failed. The device failed to calibrate the laser power level for this media."
If anyone knows the problem or understands the message, please help!

ozworldz wrote:
Very good.
right...because the xml is basically a delimited text file. This kind of file would probably rarely ever get corrupted.
ROFLMAO! Who told you that?
It'a a FILE, for heavens' sake. And to any computer, all files are essentially the same thing - a string of bytes. What makes a file vulnerable or less vulnerable is how it's handled by whatever program is using it, or to a lesser extent the storage mechanism. And when it comes to .xml files and Adobe, they don't have a particularly good track record with some of them - notably the ones they use for system settings and presets.
But I have to say that since Adobe thoughtfully gave us the option to save session data as .xml files, I haven't bothered to save them as anything else - simply because as Suite Spot says, you stand some sort of microscopic chance of being able to rescue the data when all else fails. I am fortunate - most of the stuff I do in MV doesn't use a load of tracks and absolutely no effects (live acoustic music editing), but even though the files aren't that complex, I still back them up regularly during processing because, as they regularly get rewritten and updated, they most certainly are vulnerable.

Im my lap has hard disk problem,how to resolve the problem,pls help me...

Hello,
           I have hp pavilion dv4 lap,in this lap has some hard disk problem,when i am turn on the lap that screen shows this message "The smart hard disk check has detected an imminent failure.To ensure not data loss,please backup the content immediately and run the hard disk test in system diagnostics".
           After that i was diagnostics the system but no changes in the lap,,again again lap shows hard disk error(301).
           Then i am chosen the enter option to start up the lap it take long time for openning the windows,after enter the windows that also shows about the hard disk error in within few minitues,
           What can i do?
           This lap bought at 12-oct-2012 from malasiya,now im in tamil nadu,how to solve the problem please help me.

Hello srhk. Thank you for posting on the HP Forums.
I understand the hard disk is experiencing issues. Error 301 indicates the hard disk possesses a hardware defect. I would contact HP Phone Support for assistance, or purchase an equivalent hard disk.
If you choose to contact HP, their options will be based on the warranty status of the computer. If you do not have this information, you can locate it at this website: http://h20566.www2.hp.com/portal/site/hpsc/public/wc/home?ac.admitted=1384280905804.876444892.199480...
You can utilize this website to learn how to contact HP appropriately, based on your region: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Please let me know if you have any other questions or concerns.
Mario
I worked on behalf of HP.

The disk cannot be partitioned because some files cannot be moved is the error?? please help

i want to donwload windows and i have a cd for it but the disk cannot be partitioned because some files cannot be moved is the error.please help i dont have the cds that came with the imac . can time machine work for this?

You will need to get the original DVD that came with your iMac it you are using Mac OS X 10.6.8 or if you have the Snow Leopard DVD that will work. Follow these instructions,http://support.apple.com/kb/HT2414

HT4007 I bought aperture on disk can i reinstall from the app store?

I bought Aperture many years ago( v3) I lost the disk and want to install Aperture on my new iMac. Can I do this from the app store or do I have to re purchase. I have it currently on my laptop only. Thanks

If you have the serial number for the version you are running (and if it is running on your laptop then you can retrieve the serial number by going to Aperture->About Aperture) You can download Aperture 3 from here Aperture 3.1 Trial
You will need to run software update once you've loaded this to bring it up to date.

What do I do? Please help me. (Mountian Lion, Disk Utility, Partition, Boot Camp)

I was trying to upgrade my snow leopard to mountian lion on my macbook pro 13". I didn't fully understand how to do it so I googled and found out i had to make a partition with a specific format. Prior, I did a bootcamp so I can install window 7. I partitioned my macbook with window 7 and osx. When i went to disk utility i didn't have enough space so i deleted my window 7 partition. ( i think i did it unproperly hence i have the problem). When i deleted it, it gave a random partition disk, my apple partition and the empty space i deleted for my window 7. I basically gave up on my mountian lion installation and restarted my computer. When my computer boots up it comes up with "Non-System disk" "Press any key to reboot".
What i tried was to stick in the mac ox cd in, and the application cd. Both doesn't work. Im trying to find where my window 7 cd is to see if i can restore the partition i deleted. I thats not the solution please help me
UPDATE: Also i was thinking about buying the Macbook Pro 15". With the current condition i have on my macbook pro 13" am i able to recycle it and get some store credit for it?

Once you back into OS X, reboot holding the command option r keys down, or command r keys and use that Disk Utility to repair your drive or MacintoshHD partition.
Then reboot normally and use that Disk Utiltiy to grab the little corner resizer of your MacintoshHD partition and drag it over the gray space at the bottom to reclaim the deleted Windows BootCamp partition.
If you want to try Mountain Lion, I suggest you do so on a extenral powered drive.
1: Format a external powered drive in Disk Utility Partition 1, Option: GUID Format OS X Extended Journaled and give it name like Mountain Lion (formatting a drive erases all data on it)
2: Download to Snow Leopard, Carbon Copy Cloner and use it's default settings to clone your MacintoshHD partition to the external drive.
3: Reboot the machine holding the option/alt key held down, boot from the clone.
4: Use that clone of Snow Leopard to upgrade to Mountain Lion via AppStore.
5: If and when your ready, you can boot from the 10.8 clone and reverse clone or clone Snow Leopard to another drive or whatever you need.
Most commonly used backup methods

I want to clone an internal windows disk to a larger disk in my G5 Pro. Would I have to do it from the Windows side and what software is needed?

I want to clone an internal windows 7 disk to a larger disk in my G5 Pro (2009) 2.93. Would I have to do it from the Windows side or can I do it from the mac side, and what software works for cloning if anyone knows.
thorpug

We don't mix names G5 (IBM, PowerMac) and Mac Pro (Intel)
Depends what you actually are doing.
Do both Mac and Windows reside on same or separate drives?
For running a Mac utility, then WinClone 4 $39
Review was on http://www.macwindows.com two weeks ago
For Windows on its own drive and disk to disk, then Paragon HDM 12 is best.
You should visit Paragon, for imaging and cloning Windows as well as HFS+ drivers.
http://www.paragon-software.com/products/home/for_mac.html

Windows - No Disk Error - Please help!

Windows - No Disk Error - Please help!
Hi,
I have the following set up:
* Lenovo T-61p
* Windows XP Pro, SP 3
* HP Photosmart 8250 printer (with nothing plugged into the various card readers, and USB slot in the printer)
I am getting the following error:
Windows - No Disk
Exception Processing Message 0xc0000013 Parameters 0x75CE023C
0x84C40C84 0x75CE023C
I have done a lof experimenting and thru process of elimination, and believe I have determined that this only happens when the HP Photosmart 8250 printer is plugged in to the USB slot of the computer.
I can stop it from happening by safely removing hardware, and removing the drive that the 8250 creates on your computer when you plug it in. In my case, this is drive E. I'm guessing if there was something in the the various card readers, and USB slot in the printer, that's what those would be, but I don't those use those functions of the printer.
I understand there is more at work than simply the printer, because I did not used to get this error, so some software changed as well, that is scanning all ports, and finding a drive that has no disk, and producing the error.
A simple google search finds a lot people all over the world having this problem, and are solving it in different ways, because the suspected source is different: Norton, HP, etc.
I have tried everything I have read, and the only thing that works was my own idea, of manually safely removing the drive the printer creates each time I plug in the printer.
Anyone every any better, more permanent solutions? Or know what the real root of the problem is? What is scanning all the drives and being showing an error message because it found an empty drive?
Thanks and Happy Holidays/New Year!

I've been getting the same error on my 4G nano for the past week. I've had my nano for about a month and the first few weeks were fine. Tried it on 2 different computers (Vista and XP) and same problem. Tried it on a 3rd (XP) and it started ok. Problem started coming back after a day.
I was able to find a quick fix though. I noticed that sometimes the message says something like "iexplore.exe... no disk..." even if I don't even use IE. What I do is end iexplore.exe on task manager before running iTunes and syncing my nano. I don't get the error whenever I do this, but one drawback is that the contents of my nano suddenly pops up in a window - even when disk use is not enabled.
I've reset/restored my nano dozens and dozens of times to make sure it's clean. Leads me to believe it's a driver issue. Either that or I have a friggin malware problem I can't seem to find.
I'll be posting updates every now and then. I'm no expert so I'm hoping an Apple expert also steps in to give some input.

Windows Easy Transfer (WET) Issues with External Hard Drive - "Can't read from the source file or disk"

I work for Office Depot, in the tech department. Basically, one of our associates was supposed to do a data backup, and re-install Windows 7, then transfer the files back. He used Windows Easy Transfer and compacted everything into a 163 GB file.
Now comes the hard part. When we try to put it back on his computer ((drag-and-drop to the desktop) which has been wiped back to factory settings using the recovery partition), it stops at 79.5 GB remaining (you know how it doesn't give you a % of completion,
it just shows how many GB are remaining) and then says "Can't read from the source file or disk" and gives you an option to try again, or cancel. It gets hung up on the same point each time.
Normally, this wouldn't be a huge issue, but the contents on the drive are his wife's architect blueprints and interior design stuff, along with wedding photos, etc, which are the only copies they have. On top of those, they have court documents and other
important files that we are unable to access now.
I wasn't involved with this transfer, so I'm trying to clean up the mess as best I can. I remembered that the customer's wife was Russian, and had some files typed with a Russian keyboard, so on and so forth. I wonder if that's the issue? If not, I really
have no idea how to manually extract things from a ".mig" file, or how to diagnose what area is potentially corrupted.
In light of this situation, we tried using "Recuva" to recover the files post-wipe, but everything was corrupted or unable to be opened, and it also extracted and recovered all of the "useless" photos, such as the skype logos, up and
down arrows for browsers, etc (it was 160,000+ photos).
Trying to avoid a potential lawsuit, unhappy customer, and costing the company lots of money to see if professionals can get into this external hard drive.
Other relevant information:
We used a Toshiba 500 GB (465 GB) external hard drive.
Customer's computer is an HP Pavilion P6000 Series (Model No. p6520y) running Windows 7 Home Premium 64-bit Service Pack 1.
Any other information that is needed can be provided, thanks in advance, and hopefully we can find a solution to this issue quickly!
-John

I think there's a lack of understanding somewhere.
"If you even can't start the process, please unplug it from your new PC. Then head back to your new computer and plug
the external drive back in to your new computer. "
Unplug from new, head back to new, plug it back in? That doesn't make much sense! Haha.
I knew what you meant though, somewhat. When I search through the drives after clicking yes (Has windows easy transfer
already saved your files blah blah blah) I click on the transfer file and it says "Windows Easy Transfer could not open the file".
Rather than drag-and-drop the file to the desktop, I now tried to double-click on the file itself while it was plugged
into the computer. It opened, and it started transferring until it was about 70% completed, and then an error popped up saying "WET can't open the easy transfer file, make sure your USB device is plugged in or check your internet connection".
I checked, and the USB hard drive's light wasn't on. Now, I unplug it and plug it back in, and the light comes back on,
so I click Retry, and it resets the bar back to nothing and says "Transfer time: 1 minute".
Rather than continue trying, I clicked "Cancel" instead of Retry, and it says "Your transfer did not complete successfully."
It says to click "view report" for more information, but there's no "view report button".
At the moment, I am scanning the External Drive for bad sectors using the check disk tool in properties. It's frozen
at "0 USN bytes processed".

Ksenija Pretraživanje Slike Karte Gmail Disk Kalendar Prevoditelj Blogger Više ksenija josipovic Dijeli ksenija josipovic ksenija josipovic Prevoditelj Greetings from the Croatian, please help me

Similar Messages

Maybe you are looking for