KSPP division by zero error

Hi all,
While performing TCODE KSPP I'm getting the followiing error message:
"Division by zeo in formula" Message no. CR324
Anyone know what is this related to and how it could be fixed, Please need your help!!
Thanks...

Hi ,
KSPP transfers Plan Activities to Production when you run Long Term Planning ( LTP )..
Your error meassge says that " Division in Zero " error . It means that please check the receipe of the Materials included in the LTP and the formula of the resources .. The formula of the resources must be incorrect .. which is causing the error..
Please revert back for any further clarifications..
Regards
Sarada

Similar Messages

Oracle 10g GetMetricData Division by Zero Error

Windows Server 2000 (SP4)
Oracle 10gR1 (10.1.0.2.0)
ASM enabled
Using advice found:
http://www.dbazine.com/blogs/blog-cf/chrisfoot/blogentry.2005-09-17.7657940139
http://www.dbazine.com/blogs/blog-cf/chrisfoot/10goemlessons
on this forum and other places, I have more or less restored functionality to my 10g EM console. The upload process appears to be working normally and the web interface works for just about everything except the "Home" tab. I also cannot reach the ASM page to perform ASM functions.
Here are the most recent entries from the emagent.trc file.
2006-03-22 08:25:54 Thread-3020 WARN upload: FxferSend: received http error in header from repository: http://MYSERVER.MYDOMAIN.lcl:5500/em/upload/
ERROR-400|ORA-20206: Target does not exist: Agent does not exist for http://MYSERVER.MYDOMAIN.LCL:1830/emd/main
ORA-06512: at "SYSMAN.EMD_LOADER", line 1662
ORA-06512: at line 1
2006-03-22 08:25:54 Thread-3020 ERROR upload: Failed to upload file A0000001.xml, ret = -2
2006-03-22 08:25:54 Thread-3020 ERROR upload: 3 Failures in a row for A0000001.xml, we give up
2006-03-22 08:25:54 Thread-3020 ERROR upload: Error in uploadXMLFiles. Trying again in 300.00 seconds.
2006-03-22 08:26:13 Thread-3528 WARN http: 392,-1: nmehl_httpListener: signaled to exit from emctl
== Restarted ===
2006-03-22 08:30:17 Thread-3376 WARN command: Job Subsystem Timeout set at 600 seconds
2006-03-22 08:30:17 Thread-3376 WARN upload: Upload manager has no Failure script: disabled
2006-03-22 08:30:17 Thread-3376 WARN upload: Recovering left over xml files in upload directory
2006-03-22 08:30:17 Thread-3376 WARN upload: Recovered 0 left over xml files in upload directory
2006-03-22 08:30:17 Thread-3376 WARN metadata: Metric collectSnapshot does not have any data columns
2006-03-22 08:30:23 Thread-3376 WARN TargetManager: Regenerating all Metadata
2006-03-22 08:30:24 Thread-3376 ERROR util.files: ERROR: nmeufis_new: failed in lfiopn on file: E:\oracle\product\10.1.0\db_1\MYSERVER.MYDOMAIN.lcl_SID\sysman\emd\agntstmp.txt. error = 2 (No such file or directory)
2006-03-22 08:30:24 Thread-3376 WARN collector: the column name tabscanall_ps in this condition does not exist
2006-03-22 08:30:24 Thread-3376 WARN collector: the column name tabscanall_pt in this condition does not exist
2006-03-22 08:30:24 Thread-3376 ERROR recvlets: Inserted target oracle_database SID.pcs.url.com into hash table
2006-03-22 08:30:56 Thread-3816 ERROR util.files: nmeufile_getLength: Error in lfilen. Error = 2 (No such file or directory)
2006-03-22 08:32:20 Thread-3416 ERROR fetchlets.oslinetok: Process stderr = Illegal division by zero at E:\oracle\product\10.1.0\db_1\sysman\admin\scripts/semd_common.pl line 144.
2006-03-22 08:32:20 Thread-3416 ERROR engine: [oracle_database,SID.pcs.url.com,dumpFull] : nmeegd_GetMetricData failed : Illegal division by zero at E:\oracle\product\10.1.0\db_1\sysman\admin\scripts/semd_common.pl line 144.
2006-03-22 08:32:24 Thread-3416 ERROR fetchlets.oslinetok: Process stderr = Illegal division by zero at E:\oracle\product\10.1.0\db_1\sysman\admin\scripts/semd_common.pl line 144, <STDIN> line 2.
2006-03-22 08:32:24 Thread-3416 ERROR engine: [oracle_database,SID.pcs.url.com,archFull] : nmeegd_GetMetricData failed : Illegal division by zero at E:\oracle\product\10.1.0\db_1\sysman\admin\scripts/semd_common.pl line 144, <STDIN> line 2.
2006-03-22 08:47:20 Thread-3476 ERROR fetchlets.oslinetok: Process stderr = Illegal division by zero at E:\oracle\product\10.1.0\db_1\sysman\admin\scripts/semd_common.pl line 144.
2006-03-22 08:47:20 Thread-3476 ERROR engine: [oracle_database,SID.pcs.url.com,dumpFull] : nmeegd_GetMetricData failed : Illegal division by zero at E:\oracle\product\10.1.0\db_1\sysman\admin\scripts/semd_common.pl line 144.
2006-03-22 08:47:23 Thread-3476 ERROR fetchlets.oslinetok: Process stderr = Illegal division by zero at E:\oracle\product\10.1.0\db_1\sysman\admin\scripts/semd_common.pl line 144, <STDIN> line 2.
2006-03-22 08:47:23 Thread-3476 ERROR engine: [oracle_database,SID.pcs.url.com,archFull] : nmeegd_GetMetricData failed : Illegal division by zero at E:\oracle\product\10.1.0\db_1\sysman\admin\scripts/semd_common.pl line 144, <STDIN> line 2.
And here are the entries from the emoms.log file.
2006-03-22 08:28:55,562 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.256 - Integration Class not found: oracle.sysman.ias.ias.IASIntegration
2006-03-22 08:28:56,000 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.256 - Integration Class not found: oracle.sysman.eml.target.slb.common.SLBIntegration
2006-03-22 08:28:56,187 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.256 - Integration Class not found: oracle.sysman.eml.ssl.intg.SSLIntegration
2006-03-22 08:28:56,343 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.256 - Integration Class not found: oracle.tip.oem.central.domain.ProcessConnectDomainIntg
2006-03-22 08:28:56,343 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.256 - Integration Class not found: oracle.tip.oem.central.instance.ProcessConnectInstanceIntg
2006-03-22 08:28:56,359 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.256 - Integration Class not found: oracle.webdb.admin.em.PortalIntegration
2006-03-22 08:28:56,359 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.256 - Integration Class not found: oracle.webdb.admin.em.SSOIntegration
2006-03-22 08:28:56,375 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.256 - Integration Class not found: oracle.reports.em.RepIntg
2006-03-22 08:28:56,375 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.256 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsEmailIntegration
2006-03-22 08:28:56,375 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.256 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsOidIntegration
2006-03-22 08:28:56,390 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.256 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsOvfIntegration
2006-03-22 08:28:56,390 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.256 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsWebconfIntegration
2006-03-22 08:28:56,406 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.256 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsWirelessIntg
2006-03-22 08:28:56,406 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.256 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsCalGrpIntegration
2006-03-22 08:31:28,171 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:31:28,218 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:32:28,218 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:32:28,218 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:33:28,218 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:33:28,218 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:34:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:34:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:35:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:35:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:36:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:36:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:37:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:37:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:38:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:38:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:39:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:39:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:40:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:40:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:41:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:41:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:42:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:42:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:43:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:43:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:44:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:44:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:45:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:45:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:46:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:46:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:47:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:47:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:48:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:48:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:49:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:49:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:50:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:50:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:51:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:51:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:52:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:52:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:53:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:53:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:54:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:54:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:55:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:55:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:56:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:56:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:57:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:57:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:58:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:58:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 08:59:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 08:59:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 09:00:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 09:00:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 09:01:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 09:01:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 09:02:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 09:02:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
2006-03-22 09:03:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.476 - Number of HB error responses received = 1
2006-03-22 09:03:28,281 [PingHeartBeatRecorder] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.485 - ERROR 0 EMD_URL = http://MYSERVER.MYDOMAIN.lcl:1830/emd/main CODE = 0 MSG = ORA-01403: no data found
Here is the status from the sysman.emd_ping table:
Agent is Unreachable (REASON = Connection refused: connect). Host is unreachable (REASON = Internal Error pinging the host for EMD_URL http://MYSERVER.MYDOMAIN.lcl:1830/emd/main.CreateProcess: /usr/sbin/ping MYSERVER.MYDOMAIN.lcl error=3)
Finally, from the SYSMAN.MGMT_TARGETS table, I see the following statuses for the various target types
Target_type; Last_load_time
oracle_emrep; 22-MAR-06
oracle_emd; 22-MAR-06
host; 13-OCT-04
oracle_database; 13-OCT-04
oracle_listener; 13-OCT-04
osm_instance; 13-OCT-04
Any thoughts or additional suggestions?? I have been working on getting the EM console back up and fully functional for several days. I am more of a 9i type, not 10g.
Yes, it's been 18 months since this last worked; what can I say? I inherited this server from a vendor.
Regards,
hmscott
Does anyone have

A couple of updates:
1. I found a perl script file in the sysman\admin\scripts folder called semd_common.pl. I found the line number referenced in the log file. Apparently, the $total variable (representing disk space, I think) is not set properly. When I hard coded it to a fixed value and restarted the dbConsole, I stopped getting the division by zero error.
Not a good solution, but maybe a step sideways. I'd like to remove my edit, but one thing at a time.
2. I found another error message in the OracleDBConsoleSIDwebsrvc.log file:
03/22/06 14:44:23 Received exitCode 1 from emctl istatus
Googling this particular message did not reveal a whole lot to me.
Any more ideas? Anyone?
Regards,
hmscott

Function to replace division by zero error cells with blank cells when calculating a numeric average

Hi everyone,
I have a five sheet spreadsheet that uses data from four sheets to calculate numeric averages in the fifth. The problem is that there is not always data in all four sheets which produces a division by zero error in the averages sheet. Is there a function or setting in Numbers 2.3 (not yet ready to upgrade to Numbers 3) that will allow these division by zero cells to be replaced by blank cells.
I have tried using statements of the form =AVERAGE(IFERROR(Sheet 1::Table 1:: B4,""),IFERROR(Sheet 2:: Table 1:: B4,""),Sheet 3:: Table 1:: B4,""), Sheet 4:: Table 1:: B4,"")). however instead of a division by zero error this produces an error telling me "the function AVERAGE expects that a number, date or duration but found "." ". It looks as though I will have to make about 400 changes to my sheet as these errors are in this and approximately 100 other cells!
I am hoping that there is some way if possible of correcting these errors without having to manually edit each cell individually.
Thanks,
Hugh

Hugh,
You may want to consider an intermediate sheet to handle the errors and then pass the result on to the main sheet.
In the following mockup, I've created a small interposing table the consists of a list of sources in column A and the result from each table. In the example, I perform some operation on those intermediate results, to be passed on to the main table. This may not be a good example, and since I don't know the overall goal of your project it's just a surrogate. (In real life we probably wouldn't be interested in finding the average of averages.)
The expression in Summary::B2 is:
=IFERROR(INDIRECT(A&"::B4"), "SourceError")
Regards,
Jerry

How to handle division by zero error in sap crystal report custom formula function

Hi,
I have one report in that there is one custom function created called percentage when i run the report it give me error like division by zero. here is that function
Function (stringvar amount11,stringvar amount22)
stringvar amount1 := replace(replace(amount11,'.',''),',','');
stringvar amount2 := replace(replace(amount22,'.',''),',','');
if length(amount2) < 16 then
tonumber(amount1)*100/tonumber(amount2)
else
numbervar c:= length(amount2) - 15;
if length(amount1) > c then
stringvar amount3 := left(amount1,length(amount1)-c) + '.' + replace(replace(right(amount1,c),'.',''),',','');
tonumber(amount3)*100 /tonumber(left(amount2,15))
else
0
in RED highlighted area here i got that error. how i can resolve this one.
Kind Regards,
Ganesh

Hi Ganesh,
Change the formula in which the function is being called to:
stringvar amount22;
if amount22 = 0 then 0 else
Function (stringvar amount11,stringvar amount22);
-Abhilash

Integer Division by Zero Error

I'm getting the above error about 5 minutes into encoding
with FME 1.01.460. Any ideas?

Can you please upload the log file and screenshot of the
error.
The log file is located at: C:\Documents and
Settings\<UserName>\My Documents\My Videos

Testing for division by zero

This program consists of 2 classes.
The getRating method performs actual calculations based on the below values. The program runs OK, until you test it when dividing by zero.
I am trying to return 0 if there is division by zero. I don't think I am approaching this correctly. In all 4 calculations, the only variable that the other numbers are divided by is attempts.
So, I was trying to catch the value of attempts here, then return a 0 if attempts are <= 0.
Is this the correct location to put the conditional logic? Should it be up in the method that actually performs the calculations?
The compile error indicates "cannot find symbol" at the if(r2... test.
Thanks
System.out.println("\nTest2");
    Quarterback r2 = new Quarterback("Fred Savage", "Loyola");
    r2.setYards(78);
    r2.setTouchdowns(0);
    r2.setCompletions(5);
    r2.setAttempts(0);
    r2.setInterceptions(2);
    if(r2.setAttempts>0){
     System.out.println("The rating should be 36.7.");
     System.out.println("Your code calculates a rating of " + r2.getRating());
    } else {
     System.out.println("Attempts were zero so rating is zero" + "0");
    }

if(r2.setAttempts>0){This isn't valid syntax. setAttempts is a method which takes parameters, for one thing, and likely doesn't return a value that you can compare with anything. There might be a getAttempts() method for that, but it's your class so supposedly only you know about that.
But it sounds like you just don't want the getRating() method to fail with a division by zero error. Well, put the logic in that method, not here.
So in the getRating method, you should check for the attempts value being zero before you try to divide by it.

Encounter division by zero on call of DAQmxStartTask

I am programming in Borland Builder 5 (C++) for data acquisition with a USB-6009 board.
When the DAQmx ANSI C example program, Acq-IntClk, is compiled and run, the program encounters a division by zero error during the DAQmxStartTask(taskHandle) call. The only change in the code which I made was 'DEV1' to 'QNWDAQ' to match a device name change I had made with the NI 'MAX' utility.
I had previously encountered the same problem in an instrument control program I was writing. I was successfully doing digital output before adding the analog input code.
Has this problem been encountered before? Is there a solution?

The code resulting in the divide by zero is listed below. The line where the divide by zero error occurs is marked by
//<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
#include <stdio.h>
#include "NIDAQmx.h"
#define DAQmxErrChk(functionCall) { if( DAQmxFailed(error=(functionCall)) ) { goto Error; } }
int main(int argc, char *argv[])
int32       error=0;
TaskHandle taskHandle=0;
int32       read;
float64     data[1000];
char        errBuff[2048]={'\0'};
/*/ DAQmx Configure Code
DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
DAQmxErrChk (DAQmxCreateAIVoltageChan(taskHandle,"USBDAQ/ai0","",DAQmx_Val_Cfg_Default,-10.0,10.0,DAQmx_Val_Volts,NULL));
DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,"",10000.0,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,1000));
/*/ DAQmx Start Code
DAQmxErrChk (DAQmxStartTask(taskHandle));//<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
/*/ DAQmx Read Code
DAQmxErrChk (DAQmxReadAnalogF64(taskHandle,1000,10.0,DAQmx_Val_GroupByChannel,data,1000,&read,NULL));
printf("Acquired %d points\n",read);
Error:
if( DAQmxFailed(error) )
  DAQmxGetExtendedErrorInfo(errBuff,2048);
if( taskHandle!=0 ) {
  /*/ DAQmx Stop Code
  DAQmxStopTask(taskHandle);
  DAQmxClearTask(taskHandle);
if( DAQmxFailed(error) )
  printf("DAQmx Error: %s\n",errBuff);
printf("End of program, press Enter key to quit\n");
getchar();
return 0;

The error of PC00_M27_CALC_SIMU Division by zero not performed

Dear Export,
       When I run PC00_M27_CALC_SIMU to simulation,occurs error:
/810 Partial period factor 10
Division by zero not performed
Calculation rule    HKPF/810          RTE=TSDIVI RTE-TSDIVP RTEKGENAU RTE
Can you tell me how to resolve?
Best Regards,
Merry

Sorry, i have wrong, i have checked IT0007 Monthly working hrs        0.00 Annual working hours       0.00
IT0008 Capacity Util. Level 100.00 %        PER
Work hours/period    173.33 Monthly
Ann.salary                   0.00 HKD
Can you tell me why my work schedule run can not auto generate Monthly working hrs and Annual working hours     ?

Division by Zero not performed,PCR X013 error!!!

Hi Guru's,
i am running the US Payroll...
during the Simulation run it is giving me this error"Division by Zero not performed,PCR X013 error"...
i have 3 WT's in IT 0008
Basic pay Processing class -1 subtype 0
other allowance P.C-1 subtype 3
special allowance P.C-1 subtype 3
wht's the solution?also when i chk /001 it has P.C -1 value 5...
so if i change my wagetypes to P.C-1 Value 5 then i get PCR X010 (Addition) error...
Kindly guide me i am really confused on this...
also give me a clear understanding on these 2 PCR's X010 n X013
hr_user

Please fill the field "work hours/period" in IT0008 for the employee. I hope this will resolve your issue.
Regards

Error Division by zero not performed during run payroll

Dear Experts,
I have problem when run payroll. Division by zero not performed
Calculation rules L0133****5 AMTIOTLMT RTE=TSDIVP DIVID ARR ZER
Thanks in advance

Hi,
Try checking in It0008 the field Work/hours Period (DIVGV). The issue must be there. In there you probably have a 0 and you must have the numbers of hours of work. Check that field. If you have a number different than 0 then the issue is some place else. If the number is 0 you can enter the hours manually for now to solve it, but you will have to check some configuration of the working times because that field should be fill automatic.
Check that and if the problem is not in there told us and maybe we can help find another solution.
Hope it helps.
Kind Regards,
Edoardo

Percentage calculation and zero amount entries get dvision by zero error

Hello, i am calculating the total of a field and then reporting the contributions of that line entry in percentage form but when a line has a zero amount i get an error of 'division by zero'. I'll give some explamples below incase i'm not explaining very well. If you replace the 225 under amount with 0 that is when i get the error.
code sample..
WhilePrintingRecords;
numbervar n := {@Total Weight}% Sum ({@Total Weight}, {JSALES_REPORT.SOPNUMBE});
data sample...
Amount      % of total
150             40%
225             60%
(375)

Hi Rod.
I'd recommend using and IF statement to deal with division by zero. I'm not sure what you exactly want to do with records that have division 0 but I usually do the following to see which records are creating the div by zero errors and then decide how I want the values to be displayed after evaluating it.
WhilePrintingRecords;
if {whichever.field} = 0 then 9999999999 // this would be an indicator to me to take a look at this record
else
numbervar n := {@Total Weight}% Sum ({@Total Weight}, {JSALES_REPORT.SOPNUMBE}); // your original formula
You can then change the 99999999 number to whichever number you think should be viable to answer your business question on items that are divided by 0.
Hope this helps.

VB6: division by zero when create task

When I try to run "Onesample.vbp" in VB6 examples folder
appears the message-box: "Error: 11 division by zero".
I followed the suggestion to change decimal separator
from "." to ",".
Debug say me that the error occours when I create
the task.
Any hint?

Kelly, initially, I would suggest you have your weight and height measurements in the same type of units (kg or cm) and write your code when you square it as (Height * Height). Your code of x<>0 seems as though it would generate an error as the program would read it as less than and great than 0. Sometimes you get errors that say one thing but the snytax is missing a parenthesis or a quotation mark, so I would go back over your syntax. Hope this helps.
Josephine

VB6: division by zero

When I try to run "One sample" examples in VB6 folder
appears the message-box: "Error: 11 division by zero".
I followed the suggestion to change decimal separator
from "." to ",".

Hello,
What version of LabVIEW are you using? If you are using 6.0, please download and install the 6.0.2 update from our website. Then mass compile your VIs to see if the problem persists. You can read the on-line help in LabVIEW for more information on performing a mass compile.
If, after installing 6.0.2 and mass compiling, you still get the error, then the problem may be with the ActiveX control itself...to my knowledge LabVIEW is much more strict in handling exception errors than other environments like Visual Basic.
I hope this suggestion helps. Good luck with your application, and have a pleasant day.
Sincerely,
Darren N.
NI Applications Engineer
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

[Solved] Division by zero. What to do?

This is all about one variable ($progress) which, sadly, will rarely equal zero, resulting in an annoying "division by zero!" error.
expectedCompletion="$( echo 3k $elapsedTime 10000 \* $progress / $totalTime / 0k 0.5 + 1 / f | dc )"
The only "fix" I've been able to think about so far, is to add one to $progress when it's equal to zero.
However, as I am a bash noob, I am wondering if there's a better solution. If for example I could catch the error, not output an error massage, but instead return a value of my choice, that's be cool.
There may also be a mathematical solution to the problem, but I certainly don't see it.
In any case, thanks in advance.
Last edited by zacariaz (2012-09-11 21:08:24)

What I added is something like an if statement, and works as expected. It relies on some implementation details like that the expression is grouped and evaluated from left to right and that the execution is aborted as soon as the endresult can be determined.
Edit: It also relies on echo never failing. Otherwise you could end up with some unexpected results like "progress 0, echo fail, so calculate result"
var=$( [ cond -eq 0 ] && echo a || echo b )
-> set var to the stdout of the shell command:
test if cond equals 0
&&: If true (exitcode 0)
echo a
||: test and echo both with exitcode 0, so the or is already true, do nothing
&&: False (exitcode not 0), so skip echo a
||: we arent't successful yet, so
echo b
If you want to use a more straight forward if construct, it would be something like this:
if [ $progress -eq 0]; then
expectedCompletion="progress is 0"
else
expectedCompletion="$( ... YOURCOMMAND ...)"
fi
Last edited by progandy (2012-09-11 21:16:29)

Update Rules : Divide by zero error

Hi All,
I am calculating Condition Rate for billing using formula KWERT/FKIMG i.e. amount/quantity. Its giving me divide by zero error when FKIMG = 0.
Can we prevent division by 0 error like we can do it in query formula uding NDIV0.
Thanks
PB

Hi,
you can write routine to avoid the error.
if quantity <> 0.
conditon rate = amount /quantity
else
conditon rate = space or zero (according to your requirement)
endif.
Message was edited by:
Siva Chidambaram

KSPP division by zero error

Similar Messages

Maybe you are looking for