KSU5 Assessment can't use Functional Area as a sender?

I have created a assessment cycle using cost center ,functional area and cost element as sender.
When I entry the functional area as sender in KSU1 and then execute KSU5 will has the message u201Cno valid receiveru201D
Anyone has the same issue?

Dear Christian:
if I let the function area empty in sender,it won't have the message and get the receiver.
ex. I entry CTR 1000,function area "admin" and cost element "400000"as the senter and receiver CTR "1100" and "1200"
It will have the error message "no valid receiver" when I execute KSU5.
But if I remove the functional area as the sender.the cycle can get the receiver CTR "1100" and "1200".
The problem is I need to use the Functional area as the sender too .

Similar Messages

Can't use function in creating record group

Gurus,
This question is for developers. Is this true one can't use
function in creating record group. I am using form5.
thanks,
ZW

I figured out the issue... they changed the way Group Calls are limited.
Here's a full explaination - and a suggestion for a behavior fix: http://community.skype.com/t5/Windows-desktop-client/Please-Fix-Group-Video-Voice-Calling-Limit-Beha...
Long story short, you can't do a video calling at all if the group has more than 10 people in it total (including you).
Also, you can't do voice calling in groups with more than 25 people.
Text chats are limited to 300 people (or so I've been told by Skype employees). I've been in a chat with over 100 participants though so I know it goes that high at least.

How can I using functions implicit in dll file in java code ?

How can I using functions implicit in dll file in java code ?
I'm developing a program that interfacing with fingerprint hardware.
I have the finger print already, and I have to the SDK that have all functions for managing this fingerprint.
These SDK functions are represented in dll files.
I want to know how can I use these functions in java code .
I looked on this link of sun forums :
http://forum.java.sun.com/thread.jspa?threadID=305171&messageID=1215613
but I don't Understand the meaning of native code.
Thanks for help.

please please please please please please please please help me:
After reading a lot of articles, tutorials, and overviews about JNI (Java Native Interface)
I found that these steps
1.     Develop the Java code
2.     Compile the Java code to a class file
3.     Generate the header file
4.     Implement the native method
5.     Create the shared library or DLL
6.     Run the Java program
Is the common steps in JNI development
The most powerful link was
http://java.sun.com/docs/books/jni/html/start.html
and
http://www.netbeans.org/kb/55/beginning-jni-part2.html
and the pdf oh this link
http://www.ibm.com/developerworks/edu/j-dw-javajni-i.html requiring IBM registration to download it.
But I have already the DLL, and want to the stright forward way to use its functions by java code only.
I don not to write any C++ code .
Is this possible???????????????????????????????
The name of these dll is �zkemsdk.dll�
It developed by ZKSOFTWARE company for managing a finger print �NP1500A�of
http://www.napcogulfsecurity.com/finger_print.asp
thanks for help

Can we use same Business Service for Sender and Receiver

Can we use same Business Service for Sender and Receiver

Hi
In addition to the above infomation explaining about the Business Service..
Business Service: Address an abstract business entity as the sender or receiver of messages.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
The business services are used when configuring cross-company processes also..
regards
Kishore

HT4864 Can you use Windows Live Mail to send/recieve iCloud email and share contacts or can I just use iCloud email on my PC without use Live Mail?

Can you use Windows Live Mail to send/recieve iCloud email and share contacts or can I just use iCloud email on my PC without use Live Mail? I want to use one email adress, one contact list and one calendar. I want to be able to have access to all this on my iphone and pc.

You can only use Mail, contacts and calendars will not work, for that you need Outlook.

Can I use function "HS.NODE.METHOD" in Calc type?

Can I use this statement in "Sub Calculation"?
IF HS.NODE.METHOD("") = "EQUITY35" THEN
END IF
I try to use it but when I run consolidation, it's always show "aborted"
Thanks in advance
Refer to Administrator's Guide:
Method
Gets the consolidation method for the specified member. If there is more than one non-zero
value, the system returns the first one found. This function can be used in these types of rules:
l Calculation
l Translation
l Consolidation
l Allocation
Syntax
HS.Node.Method("POVExpression")
where POVExpression is a combination of Scenario. Year, Period, and Entity members.
Return Value
A String that specifies the consolidation method for the specified point of view.
Example
In this example, if the method for the point of view is GLOBAL, then statements between the
If...Then and End If statements are executed.
If HS.Node.Method("S#Actual"."Y#2009"."P#January". "E#Regional.Connecticut") = "GLOBAL"
Then
End If

Hi,
Please see the below link for the rules functions.
http://docs.oracle.com/cd/E17236_01/epm.1112/hfm_admin.pdf
And also the following KM IDs, might be helpful as well.
Financial Management Rule Function Hs.Node.Isbase Returns True Even When the Entity is Inactive (Doc ID 1330580.1)
Hs.Node.Method() generates "Expected Identifier" Error (Doc ID 1274123.1)
Hope this helps,
Thank you,
Charles Babu J
Edited by: CJX on Dec 14, 2011 1:40 AM

Installed itunes 10.5 and now can't use function keys on my keyboard

I just downloaded iTunes 10.5.0.142 and I now can't use the function keys on my keyboards to change track, pause etc. Is anyone else having this problem? Also, why is it now ctrl+shift+m to switch to mini player? Ctrl+m doesn't do anything now

Yeah I agree the white keyboard was clunky, I dont really miss it. The problem is you can't just use the new lighter keyboards with the white imacs bc the operating system is outdated. The apple store told me I needed to upgrade my operating system and it would cost me 170 dollars, which I found incredulous.
I dont think its due to an app running or an expose issue, thanks for your responses.
aghhhh maybe ill have to buy an old crusty one on ebay. why the heck would apple not make a compatible keyboard for their 3 year old computer anymore, WHYYYYYY???!!!

Can i use Functions in Header/Footer ( want to have pagewise totals) - Urgent

hi there,
I want to show pagewise totals. is it possible to use functions (sum,count etc.) in the Header / footer of a workbook ? Otherwise, pls. suggest a workaround is possible.
I am using Discoverer Ver. 4.1.37.00.0 Desktop edition.
Thanx,
Rajesh.

EDIT: I notice I am giving instructions for Numbers 3.0 but the OP may have Number '09. Same ideas apply but the instructions are not quite the same.
Depends on which axis. I do not know your expertise level so I may explain some things you already know.
To change the Y axis scale, select the chart and go to the axis tab in the format sidebar. Click on Y Axis. Put in your minimum and maximum values for the "scale". Then choose the numer of "steps" for the Y axis.
For the X Axis:
Most charts are "category" charts. That is, on the chart the X Axis data is evenly spaced. The X Axis data could be numbers it could be text, it doesn't matter, it is evenly spaced across the bottom. For these charts, there is no changing the X axis scale; the question itself doesn't make any sense. The X axis data is typically put into a header column/row (as you have noticed).
There is one chart type, the Scatter Chart, that has a scalable X axis. It makes a true X-Y chart. The scaling for the X axis is done the same way as the Y axis. Note that for a scatter chart, the X axis data cannot be in a header row/column.

Can I use functional script as a load script ?

I'm wondering if there is any chance to use functional script that I did in openscript as a script for load testing? Is there any converter or something to do that ?
Thanks!

Hi Sudha,
While executing OLT scripts, all actions mentioned in script will be done. So we cannot say OLT scripts cannot use for functional testing.
But you cannot convert your OLT scripts to a OFT scripts. OLT scripts works on the basis of protocols and get/post methods.
Record a scenario in OLT as well as OFT and see the code view for the difference.
Regards,
Deepu M

How can I use my NI 9401 to send a 5V signal to a solid state relay?

To start off, I am a complete novice to LabVIEW and I am working on my senior capstone project. Please, bear with me and I will try my best to help you help me.
I am wanting to use my NI 9401 to send a voltage to a solid state relay so that I can control the temperature of a heating element. Ideally what I want to do is:
1. LabVIEW sends voltage to relay.
2. Relay turns on.
3. Heating element reaches desired temperature.
4. LabVIEW does some sort of pulse to maintain that temperature.
Right now I have one wire set inside of DIO 4 (or pin 20?) because I have read that 4:7 are for outputs. I also have another wire in the first COM slot (pin 1?). I believe that these two wires will be placed in the "input signal" spots on the diagram below.

Your description is not very clear for me. However, usually output lines of control boards do not have a 5V signal as required by a solid state relay. The output usually is "TTL compatible" which means that it may be anywhere between 2.8V and 5.0V in high state.
Usually solid state relays are connected to an "open collector output". Most digital outputs can be used in this mode, too. You have to wire the (+) terminal of the relay to a 5VDC source (many boards have a 5VDC output - with limited current capacity, when using an external 5VDC source the GND terminal of the latter must be connected to GND or COM of the board). The (-) output goes to the digital output of the board. When wiring this way, logic states are inverted with respect to the relay operation. The relay will be ON when the digital output is in LOW state and will be OFF when the output is in HIGH state.
Check the current limit of your output line in "sink mode" and compare it with the current requirement of the relay input. Most solid state relays require 10 to 20 milli-amps at the input which is well inside the current limit of most digital outputs (usually 24 milli-amps, sometimes 48 milli-amps).

How can I use my mobile number to send and receive sms through Messages Mac?

How can I do this? I am in the Philippines. Thanks.

You can only use your phone number with iMessage if you have got the iPhone. If you have got it, on the Mac, open Messages, go to Messages menu (on the menu bar) > Preferences > Accounts, and tick the phone number

Can i use SWE_EVENT_CREATE or SWO1 to send email with attachement

hi guysm
is there any way i can use SWE_EVENT_CREATE or SWO1 to send email with attachment

Hi EJ,
I doubt if SWE_EVENT* can attach, neither can SWO1.
You could either send it thru SO_* FM said by sapient, or in SWU_START_WORKFLOW you can pass your attachment to the ATTACHMENT_LIST table.
Hope it helps.
Aditya

If I lost my phone, can I use my computer to retrieve/send texts?

Lost my iPhone this weekend. Is there any computer application that I can get the texts sent to me since I've lost the phone? Also can I use any app on my computer to use for texting while I wait on getting a new phone?
Lost my phone at a festival, wanted to wait a day to see if somebody brings it to an apple store or something, would they be able to identify it as mine and contact me at the store? Can somebody switch the phone to their account if I don't report it lost and if so, can I report it lost and have it deactivated still?

I'm not asking about how I can locate it now, I'm wondering what the person who has it can do with it.
Can they restore without the passcode? And they aren't able to switch service to their line? Can they make any changes to it while it's off? I guess they can sell it while its off and not let somebody know it's locked but once that person turns it on it'll turn on lost mode. But if I shut off my verizon service then it'll never turn on lost mode will it?

Insert statements using function are slow in 10.2.0.3

I am migrating our data warehouse server to newer more powerful hardware, both server and disk are far superior. As part of the migration the oracle rdbms version is also changing from 10.1.0.3 to 10.2.0.3 on RHEL4.
We have some jobs that run and populate some fact tables and when the insert runs on the new server it is at least 6 times slower that on the older hardware. The job that does the inserts uses some funtions to populate some fileds and seems to be the culprit quite possibly?
I can insert many rows quickly in the same table space with all of the same storage parameters and this goes really fast but when we call the functions it really slows down to a crawl?
Is is possible this could be a bug in the 10.2.0.3 rdbms version?

You have not provided substantial amounts of information required to help you.
Here is a partial list.
1. Has anyone collected system statistics on the new system?
http://www.morganslibrary.org/reference/system_stats.html
2. Has anyone produced Explain Plan reports with DBMS_XPLAN to see if the plans are different?
http://www.morganslibrary.org/reference/explain_plan.html
3. Has anyone run StatsPacks to compare the systems?
http://tahiti.oracle.com
We can't help you without knowing what is different.

Can i use function inside sql in a form ?????

Here SERIAL_NUM is a function, this sql work fine in TOAD and SQLPLUS but inside the form iam getting error saying "function serial_num cannot be used in a sql" Why is it like that ?? Is there anyother way to execute this sql ?
cursor c1 is
SELECT msn.ATTRIBUTE7 Order_No,
SERIAL_NUM(i.SERIAL_NUMBER) Serial_No,
msn.ATTRIBUTE5 Firmware,
msn.ATTRIBUTE15 Site_Pref
FROM atrd.INSTALLER_INFO i,
mtl_serial_numbers msn
where SERIAL_NUM(i.SERIAL_NUMBER)=msn.SERIAL_NUMBER

hi,
yes of course you can use the functions in sql as well as in forms( within sql statements).
here i think you are not connected to the Specified user which is having the function Serial_num
or other thing may that ur syntax
just check both of them that may help you.
enjoy
Tehzeeb Ahmed

KSU5 Assessment can't use Functional Area as a sender?

Similar Messages

Maybe you are looking for