KSU5 Assessment cycle execution error

Hi,
I am getting an error while executing the assessment cycle through KSU5.
I have defined the sender from one Cost center group and one cost element group. similarly assigned a receiver cost center group.
while executing the assessment cycle in test mode getting the error " .... does not include any senders.".
Can some one suggest the pre-requisites for KSU5.
Thanks & Regards

Hi
1. Check Secondary Cost Element and its Category
2. Assessment Cycle - Sender/Receiver Tab : Sender Cost Centre & Cost Elements Range From & To / Group, " which were not included "
Regards
Sridhara Rao D
Edited by: Sridhara Rao.D on Oct 20, 2011 8:01 AM
Edited by: Sridhara Rao.D on Oct 20, 2011 8:02 AM

Similar Messages

Can we run KSU5 - Assessment Cycle execute for previous periods

Dear Gurus,
Can we run KSU5 for previous periods. Means I have not ran from April 2008 onwards. Can I run right for all periods. Any inconsistencies arises for running the KSU5.
Please guide us.
Regards
Srinivas

Hi Srinivas,
You can run the Cycle for previous periods also using KISR transaction code. Here, you can select the processing period (previous period) and posting period (current period) and the Cycle and the Segments.
Note: If you want the postings to happen in the same corresponding processing periods, you need to check those periods to be open and consider other inconsistencies also.
Pls revert back for further assistance...
Srikanth Munnaluri

Assessment Cycle for Planned Cost

Hi,
I have production cost centers and dept cost centers for which cost center planning has been maintained in KP06. I have maintained assessment cycle for planned costs with planned skf. When I run the cycle, system is apportioning the costs based on the factors maintained.
However on execution, without test tun, the system is posting the costs to the receiver cost centers as Actual Costs and not Planned Costs..
Can anyone tell me what is the reason?

Hi,
Have you created ur assessment cycle in T.Code: S_ALR_87005540 - Define Assessment for Plan cost (or) S_ALR_87005742 - Define Assessment for Actual cost. Assessment cycle execution t.code. KSUB for Plant cost posting. and KSU5 for actual cost posting.
If you define cycle in S_ALR_87005540, Please check have u select Plan (or) Actual Radio button
Thanks

Assessment Cycle: ERROR asking FI period needs to be open to run cycle

Hi,
I'm trying to run the cost center assessment cycle using KSU5, but an error pops up asking the FI period needs to be open.
This is what I did:
1.       Just created two cost centers (one sender, one receiver).
2.       Posted an entry using FB50 to one of the cost center (sender) [Expense GL a/c Debit, Bank account credit]
3.       Created the assessment cycle
4.       Blocked the FI period using OB52
5.       Ran the test run u2013 worked perfectly (values all went correctly)
6.       While running the Real run u2013 an error popped up, saying FI period needs to be opened.
Dont know why I'm getting this error. Would really appreciate if anyone could help.
Thanks & rgds,
Nashad

Hi,
Thanks for your reply. But we know that FI period needs to be open. Just want to know if we could run the cycle without opening the FI period.
Eg. Our FI Period closes on the 4th of every month. We get all the SKFs for the cycles only on the 10th of each month. So, when we run the cycle FI period is already closed.
Is there no other option of running the cycle without opening the FI period?

Error with assessment Cycle

Hi all
When I run Assessment cycle its giving this error .Test run is successful, but normal run its giving the error
"No account was specified for account type "S" in item "0000000001" of the FI/CO document"
trying to find out whats happenning.
Is it some thing with the recon account
Thanks in advance

It seems that FI/CO reconciliation is active for CO postings. During assesment it is trying to create a FI document and unable to find GL account. Plz maintain account determination for CO postings.
If your SAP is 4.7 or below, check the following settings -
SPRo - Controlling - Cost Element Accounting - Reconciliation Ledger
If you are on ECC, check out the following settings -
Financial Accounting Global Settings (New) Ledgers - Real Time Integration of Controlling with Financial Accounting.

Number range error in Assessment cycle in CO-PA

Dear All,
During performing "Actual Assessment cycle in CO-PA" , system gives the error message
"An error occurred when the SAP System attempted to determine the document number. No interval was found for number range object RK_BELEG, sub-object 1000".
When I checked in KEN1 (Document ranges for actual posting) & also checked in
KANK, it is defined
Can some one can explain me how to re-solve the same.
Rgds
SMK Ganesh

Hi,
Please, check transaction KANK, under menu path of SPRO:
Controlling -> General Controlling -> Organization ->
Maintain number ranges for controlling documents
Choose Overview and find the corresponding CO area.
You will see that there are several business transactions not assigned
to any number range. One of them should be KSPA Assessment to CO-PA.
Please, assign this business transaction (and the ones required for other processes) to a number range.
Then, run again KEU5.
If the above does not help then check if problem is that you use too many receiver fields in copa cycle.
The number range object is derived from the co-area and if you are using more than 15 single value receiver fields the system wont consider the settings "behind" the co-area.
regards
Waman

Assessment Cycle(KSU5) - Allocating Cost for Only One Month

Hi,
I want to allocate cost relating 2008 from cost centres to WBS. For that I'm trying run the assessment cycle(ksu5). The test results shows allocation of cost for the month of Sep2008. i.e It doesn't allocate cost that are posted before sep and after september though the cost centre has costs from Apr 2008. My Assessment cycle period starts from 01.04.2008 and is valid for the whole year till 31.03.2009. I've 3 WBS elements to which the costs for the whole year has to be posted according to the no. of hours. Among 3WBS one is created in the month of Apr 2008 and the other is created in Aug 2008 and the last one is create in Dec 2008.
So Can anyone tell me why the cost is not posted for all the months.
Thanks in Advance
Harikrishnan L G

Hi,
Please check the Cumulative indicator in the Assessment Cycle definition. If the Cycle is not cumulative then it would not include costs of earlier month for allocation.
Go to - KSU2 and in the Header screen you will find the check box called Cumulative.
While executing the cycle through KSU5 in the selection screen you will have to specify period from and period to. It will automatically consider all costs upto the period.
Thanks,
Sanjib

Execution of assessment cycles for Costcenter group

Hi Friends,
   i have a program which excutes assessment cycles for 1 costcenter.
    now i need to run the program for multiple costcenter
(costcenter group)
eg: in the selection screen if user enter the costcenter group ........ program needs to get all the costcenters in the group and run the cycles for those costcenters.
can any help me with .. how to get the costcenters when user enters costcenter group in the selection screen.
any suggestions would be helpful.
Thanks in advance

Try:
call function 'K_HIERARCHY_TABLES_READ'
       exporting
            e_class                     = '0101'
            e_setid                     = setid
            e_kokrs                     = '1234'
            e_mandt                     = sy-mandt
            e_master_data               = 'XXX'
            e_structure                 = 'X X0200'
            e_replace_class             = space
            e_replace_unit              = space
            e_suffix                    = space
       tables
            t_nodes                     = it_ccg_nodes
            t_values                    = it_ccg_values
       changing
            c_info                      = c_info
            c_overwrite                 = c_overwrite
       exceptions
            no_controlling_area         = 1
            no_chart_of_account         = 2
            different_controlling_areas = 3
            different_chart_of_accounts = 4
            set_not_found               = 5
            illegal_field_replacement   = 6
            illegal_table_replacement   = 7
            fm_raise                    = 8
            convert_error               = 9
            no_overwrite_standard_hier = 10
            no_bukrs_for_kokrs          = 11
            others                      = 12.

Assessment Cycle problem (KSU5)

Hi experts!!!
I am trying to do an assessment cycle, but somehow not all the cost are being taken.
Only the real amounts are being taken. I need also to treat the real stadistic values.
Anyone can give me some advise?
Thanks in advance for your reply.

Hi Alejandro Garcia,
At the time of Allocation of costs (Distribution/Assessment etc), only real postings will be considered in the Sender object. Statistical postings are only for information purpose.
Pls try to understand the reason with the following example...
At the time of posting of an expense in FI, we will be able to select one Real object and two statistical Object. So, If you have selected Internal Order (which is real object) and one Cost Center, then, real posting will happen to Internal Order and Statistical posting to Cost Center.
But, if you want this statistical posting also to be considered at the time of assessment of cost from that cost center, then it would be duplication of the same cost which will finally reach Product.
I hope it is clear, please revert back for further explanation...
Srikanth Munnaluri

KSU5 Assessment can't use Functional Area as a sender?

I have created a assessment cycle using cost center ,functional area and cost element as sender.
When I entry the functional area as sender in KSU1 and then execute KSU5 will has the message u201Cno valid receiveru201D
Anyone has the same issue?

Dear Christian:
if I let the function area empty in sender,it won't have the message and get the receiver.
ex. I entry CTR 1000,function area "admin" and cost element "400000"as the senter and receiver CTR "1100" and "1200"
It will have the error message "no valid receiver" when I execute KSU5.
But if I remove the functional area as the sender.the cycle can get the receiver CTR "1100" and "1200".
The problem is I need to use the Functional area as the sender too .

Actual assessment cycles does not work

Hello.
I have a problem with actual assessment cycles.
I use KSU5 to run one cycle and when I run it in test mode it says that there is a sender and a receiver and that there are no errors, but when I run it without test mode it says that there are no senders nor receivers and no errors appear
Which could be the problem?
Thanks a lot!!

Hi,
Try these following things :-
a. Change the Receiving tracing factor in the header of the cycle from variable to fixed perct.
b. Check whether GL is assigned in Tcode OK17.
Rgds,
SAP Friend

HDI unlock assessment cycle run group

When I try to ru assessment cycle I am geting error mesage . How Do I unlock it so I can run it manualy? here do I lock it and unlock it.
Message no. GA562
Diagnosis
You want to start cycle A00004 10/01/2004. However, cycle run group 0000 is locked by user . This can happen if user is running a cycle from flow group 0000, or if the cycle is assigned to another flow group, but has dependencies with th flow group for cycle A00004.
System Response
Processing is stopped.
Procedure
Wait until cycle run group 0000 is no longer locked and start your cycle again.
You can lock a cycle run group either by executing a different cycle or manually reposting a document during indirect activity allocation.

Hi,
Try this. go to KSU5 and extras-cycle-display cycle. then select the cycle. choose go then select the cycle group and select the overview button. here you can see the sub tree and see whether any dependency is there for the cycle. If so you have to run according to the sequence.
Hope you go the answer.
All the best.
K Suresh Kumar

COPA Assessment Cycle using KEU5 for multiple controlling areas

Hello All,
There is an organization with operations in several countries. There is a separate controlling area for each country. There is one controlling area, for instance, for Germany and another for Netherlands.
A problem is encountered while executing transaction KEU5 for multiple controlling areas in parallel. For instance, when one user from Germany executes KEU5 for an assessment cycle for Germany controlling area and at the same time another user from Netherlands tries to execute KEU5 for a cycle for NL controlling area, the user from Netherlands encounters an error message u201C'Cycle XXXX 01.02.2008 cannot be started because run group 0000 is locked'.
Apparently SAP allows assessment cycles for exactly one controlling area to be executed together. This poses a problem since the organization plans to implement SAP in several other countries (There will be one separate controlling area for each country as per the organization structure adopted by the company).
Any ideas, views or suggestions on the aforesaid issue would be highly appreciated.
Regards,
Soumya

Hi Soumya,
Did you find any text in SAP Documentation saying that "SAP does not allow cycles belonging to different controlling areas to be executed at the same time"...?
Pls find the following text from SAP Help...
Parallel Processing of Cycles of an Allocation Type
Use
Parallel processing of cycles results in considerable time savings. To process cycles of one allocation type in parallel, they must be assigned to different cycle run groups.
You define the cycle run groups in the cycle header data. You also assign cycles to the cycle run groups in the header data.
To process the cycles of a cycle run group in parallel, start the cycles one after the other, if required, in different sessions.
You are carrying out a cross-company code cost accounting and want to perform the actual assessment in the individual company codes in parallel. Create a cycle run group for each company code and assign the appropriate cycles to these groups. You can then carry out the actual assessment in the individual company codes in parallel.
When you execute a cycle, you can start a consistency check. The system checks whether you are allowed to execute the selected cycles in parallel.
Though I didn't come across such requirement, I feel, my earlier suggestion will work out...
Srikanth Munnaluri

Is the Division( i. e A/B = C ) is possible in SAP? thrw Assessment cycle?

Plant Name     Qty Produced (in Kgs)   Total Cost              Per Kg     Cost
A             1000                      100000                         100
B               200                        20000                         100
C               500                       100000                         200
D            1500                       450000                         300
Requirement
*     I need to get the cost per kg forr each plant is required in SAP
     i.e Last Column results shoulh come in SAP
*     Is there any possibility to maintain any Assessment Cycle to achieve this?
*     Suggest me how to get those results in SAP
If possible What are the senders and receivers and Skfs/ Activity Types to be maintained..............?

Hi
Assessment cycles are used to transfer costs from one cost center to multiple cost centers (KSU5) or from a cost center to multiple PA segments (KEU5). You cannot use plants in an assessment cycle.
Maybe if the data you have given is available in COPA then you get get the required info using a formula in a KE30 report
regards
Waman

COPA Assessment Cycles and FI Period closing.

Hi Gurus,
I have question related to the COPA Assessment cycles.
We have closed the FI Period 03 and running the COPA Assessment cycles. while running the same, for few of the assesment cycles are completed and for the rest of the few cycles it is error out stating the Period is closed.
Why it is running successfully for few cycles and why it is complaining for Period closing for the others. We are on ECC 6 Version of SAP.
Error out cycles contains Cost accounts and Asset Account GL Accoutns.

Hi:
If your CO allocation has some external postings (like GL or fixed assets) or generating some intercompany documents, then it needs FI to be open also. It happens sometimes if the allocation goes external so it would need fI period to be open also. If FI is close but CO is open, it would only work for CO specific allocations and others would error out.
Please check the cycle/segment which is in error. If it is suppose to hit FI, then FI (OB52) and CO (OKP1) periods should be in sync.
Thanks.
Rahul

KSU5 Assessment cycle execution error

Similar Messages

Maybe you are looking for