KT266 PRO2 RU, can it lock AGP/PCI??

There is some way to lock the AGP/PCI bus in this mobo?
Greetings.

nope it just uses dividers like all via boards

Similar Messages

MSI Pro2-C (6562) - How to lock AGP/PCI clock ?

hi,
I use the BIOS 1.1 with this card, and can't lock the AGP/PCI Clock (66/33)
Is there an utility which can do that, or is it possible with the BIOS 1.2 ?
thx

-> LINK to the MB specifications.
MSI Pro2-C / MS-6562_i845
With this bios (1.1), I can't lock the agp/pci clock to 66.66/33.33 and when the FSB is about 105, pci extensions are out.
So, I would like to know if it's possible to lock agp/pci clock with the BIOS 1.2 (or maybe another bios), or if it's possible to do that with software (and if yes, which software)
CPU is p4 willamette 1.7 (17*100) and I think it would be possible to reach a fsb around 120 (@2040 Mhz) if I can lock agp/pci clock.
thanks for your help
and sorry for my english, i'm french

Lock agp/pci clock with software

hi,
I have a MSI pro2-C (MS-6562 100 rev0.4) and can't lock the agp/pci clock with bios.
Do you know a software which do that ?
thx
winxp sp2
pentium4 1.7 willamette

-> LINK to the MB specifications.
MSI Pro2-C / MS-6562_i845
With this bios (1.1), I can't lock the agp/pci clock to 66.66/33.33 and when the FSB is about 105, pci extensions are out.
So, I would like to know if it's possible to lock agp/pci clock with the BIOS 1.2 (or maybe another bios), or if it's possible to do that with software (and if yes, which software)
CPU is p4 willamette 1.7 (17*100) and I think it would be possible to reach a fsb around 120 (@2040 Mhz) if I can lock agp/pci clock.
thanks for your help
and sorry for my english, i'm french

Locked AGP/PCI

Can the k7n2 delta-ISLR lock the AGP/PCI bus?
Want to OC a 2600XP with corsair PC3200LL.

the AGP clock frequency is set at default (66).
Should the PCI auto detect also be enabled?
Is that all that is needed to lock the AGP/PCI bus?

K7T-Pro2-A can't get AGP 4x to work.

I can enable/disable in BIOS, but when i check with Sandra in Win98SE, it shows 2X.
any suggestions?
thanks,
1.2 Palomino CPU
3x128MB V.C. Mem
Radeon 9000 Pro

Blimey - how did that happen??? So sorry - I had to reboot half way through posting and it has ended up in the wrong place...Doh!

875p, I CANT LOCK my PCI / AGP Frequency using FAST,TURBO, or ULTRA

i have an 875p neo. i am one setting away from loving this mainboard(finally). i have a 2.8ghz running at 3.0 (with a 1:1 FSB/RAM). i can run stable in TURBO MODE, with "timings by SPD". i am using 1.7 bios (1.8 gives me lower performance). i tried all the bios from 1.4 and up. my problem is I CANT LOCK MY AGP/PCI frequency. no matter what, it boots up in windows as 70/35, but only when using FAST,TURBO,or ULTRA PERFORMANCE MODE. my agp/pci frequency locks fine at 66/33(67/34) if i run in SLOW MODE, but any other performance mode setting overclocks the AGP PCI frequency to 70/35. this causes my ATI 9700np to freeze almost instantly while playing any game. luckily my ATI card has unlocked bios or the problem would be worst. i have been using CLOCKGEN to throw the settings back to 66/33 when windows loads, and i get no freezes. BUT I WANT A PERMANENT FIX MSI. not a CLOCKGEN patch. my question to you all out there:
IS THERE A particular BIOS THAT I CAN USE THAT will LOCK THE PCI/AGP FReQUENCY while using FAST,TURBO, and ULTRA PERFORMANCE MODES? or another way to lock the setting in the bios?any suggestions? thanks
EDIT 2:
i just remembered, i forgot to tell you all. my agp/pci lock works fine if i run my ram in 333mhz mode. i have 400mhz ram. i was a running 1:1 ratio. agp/pci doesnt lock only if i use "auto" or "400mhz" settings. it run fine when i have my ram set to run at 333mhz. are you runnig at 400mhz or 333mhz? if 333mhz i can see why i left you guys confused...sorry.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!MY PROBLEM!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
i have an 875p neo. i am one setting away from loving this mainboard(finally). i have a 2.8ghz running at 3.0 (with a 1:1 FSB/RAM). i can run stable in TURBO MODE, with "timings by SPD". i am using 1.7 bios (1.8 gives me lower performance). i tried all the bios from 1.4 and up. my problem is I CANT LOCK MY AGP/PCI frequency. no matter what, it boots up in windows as 70/35, but only when using FAST,TURBO,or ULTRA PERFORMANCE MODE. my agp/pci frequency locks fine at 66/33(67/34) if i run in SLOW MODE, but any other performance mode setting overclocks the AGP PCI frequency to 70/35. this causes my ATI 9700np to freeze almost instantly while playing any game. luckily my ATI card has unlocked bios or the problem would be worst. i have been using CLOCKGEN to throw the settings back to 66/33 when windows loads, and i get no freezes. BUT I WANT A PERMANENT FIX MSI. not a CLOCKGEN patch. my question to you all out there:
IS THERE A particular BIOS THAT I CAN USE THAT will LOCK THE PCI/AGP FReQUENCY while using FAST,TURBO, and ULTRA PERFORMANCE MODES? or another way to lock the setting in the bios?any suggestions? i have 400mhz ram. i am running 1:1 ratio. agp/pci doesnt lock only if i use "auto" or "400mhz" settings. it runs fine when i have my ram set to run at 333mhz. are you runnig at 400mhz or 333mhz? if 333mhz i can see why i left you guys confused...sorry.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!MY FIX!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WELL I GUESS WE HAVE TO USE THE GHETTO FIX FOR NOW:
(i am assumming this is an ATI CARD only PROBLEM)
download clockgen and install it. check your AGP/PCI frequency. if it reads 70/35 then you have a problem, which will cause your ATI card to freeze up during a period of use.
unlock your cards bios(if it's not already unlocked). this will allow room for the 70/35 AGP/PCI frequency overclock. get info from rage3d.com forum on how to unlock your ATI card.
make your clockgen settings startup when windows boot, @***ghz, 66/33 agp/pci(read the clockgen instructions on how to run clockgen on boot)
download radclocker and install it.
set the AGP core/mem clock speeds to what you desire. then bump down the core TWO NOTCHES, then the memory down TWO NOTCHES then click "use current" bios button. 70/35 boot overclock pushes your ATI core/memory up two notches, so by setting radclocker 2 notches , radclocker takes the 70/35overclock two nothes lower. you have your desired speed. then clockgen throws your agp/pci frequency back to 66/33....which makes everything work right. it all boots in the right order for me.
explaination:
when windows starts it boots your agp/pci frequency@ 70/35. you need to be at 66/33 AGP/pci frequency for your ati card to run correct and not lock up after intense gameplay. radclocker underclock your card.clockgen puts your agp/pci to 66/33 AGP/PCI frequency.

KT266 PRO2 and PCI ATA controller

I have a lot of ide devices so I bought a PCI ide controller years ago. Now I got my little brothers motherboard. MSI KT266 PRO2, and plugged all my stuff into it. When it was time to reinstall Win, but it would not boot the cd, or from floppy. I checked the boot order, all looks fine.
Then I tried to take the PCI IDE controller out, and then it booted my winXP cd fine.
So basically, When the PCI ATA bios is loaded (the card), I'm unable to boot from cd-rom or floppy. Only boot from HDD1 works. So every time I need to reinstall windows, I need to unplug all harddrives from the PCI IDE controller card. Then windows is installed I can plug the harddisks back in...
I can't find an explanation to this...
No problem when the PCI IDE controller is used with 2 other motherboard I have. Latest bios is used on the motherboard and the pci IDE adapter card.
MSI KT266 PRO2
AMD athlonxp 1700+
Sapphire Radeon 9600 PRO
maxtor ata100 pci controller
768 MB DDR pc-2100 ram

On the MB controller I have 2 harddrives on primary (one master, one slave), and 1 dvd-drive (master) and 1 cd-recorder (slave) on secondary.
On my ata controller card I have 2 extra harddrives for backup. Both on the IDE1. One as master and the other as slave.
All drives are properly configured.

Agp/pci frequency lock at 33 mhz ??

how can i lock the agp/pci frequency at 33 mhz when i overclock p4 1.8a to 2.4 at fsb=133 and vcore at 1.425.... because windows xp can't start up . it keeps rebooting the pc ,,, please help
i have msi 645 ultra ddr333 ms-6547 mobo

That board and chip really only supports 100fsb :D
anything over and its overclocked!!!!! ;(
there is no stuff in tha bios to lock agp or pci ;(
Most people think overclocking is ok ?( Just buy faster next Time 8o 8o

Agp/pci clock locking help please

i have the 865pe neo, using patriot memory with winbond 5ns chip, have no problem running at 250mhz in corecenter, however when i try to o/c in bios, when with the agp/pci clock locked, i can still it increasing up to 80mhz/xxxmhz as i increase the front bus speed of the cpu, anyone having the same problem with this board? will new bios fix this? by the way , i can't manually change the agp/pci clock , it's grayed out and "locked" this ths only option available under "apg/pci clock" there's no manual setting, soeone please help i can bring this board back to get the 875p if thats needed
thanks fo ryou help

Hi tgn,
MSI have this feature locked to prevent us from o/c the CPU multipiler settings. Can't say that whether this is good or bad for o/clockers like us. Unlike Abit which unlocks everything, MSI keep settings to what the mobo detects the CPU model is, i.e, if you're running a P4 2.4, then your Multipiler settings will be 18x with 133 FSB x 4 to make 2400+- MHz, try calculating the mathematics way and you'll know how far you can o/c to.
Corecenter o/cing is another way MSI sets as it will directly show you the speed your CPU is running at vs the multipiler settings.
All the Best... :D!!!

Does My MS-6534 Has AGP/PCI Lock Feature?

Hello, I would like to ask, does my MSI MS-6534 i845 has AGP/PCI Lock feature?
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=40
Does it support overclocking?
Cause I want to overclock my CPU and I afraid it will cause some damages to my VGA Card or PCI slot card.
My PC specs:
Intel PIV 1.5 GHz (100x15)
SDRAM 256MB + 128MB PC133, total 384MB
Seagate 7200.7 40GB
Sapphire R9500 128MB mod to R9700
PSU 400 Watt
Last week my soundcard didn't sound anything after I set my FSB from default 100 to 113.
And then my PC boots so slow.
I play Wining Eleven 7 adn it goes slow, not as usuall.
Does somebody can give me some solution.
Sorry for my English.

I afraid that my VGA card was damaged cause i overclocked my CPU too high.
Are there any indications of damaged VGA Card or other peripheral like harddisk or soundcard?
I so afraid.

Do k8t neo fis2r have agp/pci lock?

Hi
I just read a test of my motherboard (MSI k8t neo fis2r).
I was written that the motherboard had a agp/pci lock.
Does it so? I dont want to damage my 9800xt with to high agp bus so i need to know! please

Simple fix... Don't overclock the system clock or what people mistakenly reffer to as the Front Side Bus (FSB)... The issue is not just with the motherboard but rather with the VIA K8T-800 chipset. The Hyperthreading, PCIO, and AGP are all tied to the system clock so when you change that clock everything is affected. Some things can handle it and some things can't. If you leave the system clock alone then there are no worries.

K8T Neo AGP/PCI lock - never here?

Anandtech states on their review:
"We contacted MSI, who told us this will be included in an upcoming BIOS upgrade."
Have we ever seen this AGP/PCI clock lock?

Via themselves reported that in the K8T chipset they could not get it to work. That is why they built the K8T pro chipset. The Neo systems with the original K8T chipsets can not nor ever will have PCI/AGP lock.

Can't connect JAI CV-M1 camera to PCI-1409. Error: 'Can't lock on video source'

I am connecting a JAI CV-M1 camera to a PCI 1409 card but I can't kill the error message 'can't lock on video source'. Does anybody has the right interface and camera files for me (*.iid and *.icd)? Thanks...

Hi, I had a customer that used that camera , the configuration files are available in NI site , but you need to connect NOT only the BNC but in addition you need to connect PCLOCK pin because Pixel Clock is not standard.

So does the AGP/PCI lock work or not??

I have read many contridicting reports as to whether the AGP/PCI lock actually works on the K8N Neo Platinum.
Some say yes, some say no, some say setting it to 67 in the bios enables the locks. Does anybody actually know for sure, and not rely on that Clockgen thingy?? Also, if it must be set to 67 for sure, will this be addressed in a future bios release??
I am currently a bit scared to begin overclocking when I hear about RAID sets dropping out on the account of unlocked buses on a board that is supposed to have locked buses.....

I heard if you changed the AGP bus to 68 it will still lock but you will get much better overclocking results...

Does MSI K8N NEO 4 have (agp)/PCI lock?

hi. yeah, Does MSI K8N NEO 4 have (agp)/PCI lock? I saw only the PCI-E lock (100MHz)

Quote from: gpalmer on 03-November-05, 21:18:07
the neo4 does not have AGP.
No, I know it. "( )"
Quote from: Richard on 03-November-05, 21:29:27
Paradis,
The PCI, IDE and SATA are locked.
Take Care,
Richard
okej, thank you. I feel me safe now :D

KT266 PRO2 RU, can it lock AGP/PCI??

Similar Messages

Maybe you are looking for