KT266 Pro2-RU

Hi
After update the bios whit the latest version (6380v37.exe) my system don't do a cool reboot.
When i make some change in bios and i save and exit the sistem save the change but the machine don't restart.
some suggestions ???
Thank's
Andrea

Do you then have to press the power button for 5 secs and power off and then power on? My system is like that after I upgrade to 3.7 bios
It cold starts ok and boot into winXP, but when I do a restart in winXP, it just cannot restart past the bios POST, the screen blanks and the power led turns off with only the hd led on and I have to power if off with the power button and then on again .... a pain in the ass
The same thing happens if I make any changes in the bios and save and exit - it just cant go pass POST and I'll have to power it off and on again and it'll POST.
I went back to 3.3 bios immediately - 3.3. is the most stable to me.

Similar Messages

  • KT266 PRO2 and PCI ATA controller

    I have a lot of ide devices so I bought a PCI ide controller years ago. Now I got my little brothers motherboard. MSI KT266 PRO2, and plugged all my stuff into it. When it was time to reinstall Win, but it would not boot the cd, or from floppy. I checked the boot order, all looks fine.
    Then I tried to take the PCI IDE controller out, and then it booted my winXP cd fine.
    So basically, When the PCI ATA bios is loaded (the card), I'm unable to boot from cd-rom or floppy. Only boot from HDD1 works. So every time I need to reinstall windows, I need to unplug all harddrives from the PCI IDE controller card. Then windows is installed I can plug the harddisks back in...
    I can't find an explanation to this...
    No problem when the PCI IDE controller is used with 2 other motherboard I have. Latest bios is used on the motherboard and the pci IDE adapter card.
    MSI KT266 PRO2
    AMD athlonxp 1700+
    Sapphire Radeon 9600 PRO
    maxtor ata100 pci controller
    768 MB DDR pc-2100 ram

    On the MB controller I have 2 harddrives on primary (one master, one slave), and 1 dvd-drive (master) and 1 cd-recorder (slave) on secondary.
    On my ata controller card I have 2 extra harddrives for backup. Both on the IDE1. One as master and the other as slave.
    All drives are properly configured.

  • KT266 PRO2 & BIOS

    HEY GUYS
    I got a KT266 PRO2 (6380 Version 2)
    NOTE::  NOT A RU OR A  Motherboard.
    AMI Bios Version 3.3 Dated 11-30-01
    Now for the 3 questions
    Is this the latest Bios for this motherboard? I cant seem to find anything on it at the MSI Site.
    I want to put a XP1800 Thoroughbred processer and dont know if this board will support the 13U Core. Does anybody know??
    By the way why isnt this listed on MSI site. I bought this board less than a year ago.
    thanks
    gray

    Nawww your not dumb...Hey maybe its me.
    Well i wanted to use an XP1800 (thoroughbred) processer which runs i believe at a lower voltage than a
    XP1800 (Palamino) core. I was thinking that a BIOS flash my let me do this. However the boys over at AMDMB.COM says that  I cant run Thoroughbred on this motherboard without doing a mod. By the way this link might help somebody else.
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=28&NAME=MS-6380
    Dont know why i couldnt find it on the MSI site
    Cheers

  • MS-6593 KT266 Pro2-U Higher Multipliers = ~700mhz :censored:

    I have a KT266 Pro2-U board and a ThoroughbredB XP1800. I want to be able to up the multiplier on this XP to 15. I have the latest official bios for the board and there is a 15x setting in it, however the setting makes the cpu function at 700mhz. I have already unlocked the CPU by bridging the L3 #5 bridge. What else do I have to do to use the higher multiplier? This thing runs at 47 deg under load at 139mhz fsb, I think I can go for the full 15x139 and be stable and cold.

  • Problems with KT266 Pro2-A & Inno3D GeForce

    I have got a troubleshottings with KT266 Pro2-A & Inno3D GeForce (2-MX400 and 4-MX440). Windows 98 and XP not work correctly. Freezing, turning off monitor after booting. !!!With last official drivers of nVidia (Detonators)!!! In other boards, is everything OK. What  can do? ...diposplus

    open the pc and look for a label on your psu
    will look like ones in this thread
    http://www.msi.com.tw/program/service/forum/index.php?threadid=10358&boardid=9&styleid=1

  • KT266 Pro2 Blue Screen.. via chips??

    everytime i try to run a program, more specifically, games; IE: WarCraft 3, Command & Conquer: Generals, or n/ething that requires Direct X (my speculation) when i quit the game (and only when i quit the game) i get this gay blue screen in windows 2000 (and it was in XP also) that says "IRQ NOT... " something something, i'm not sure, all iget is the IRQ part about my AGP controller? or VIA chipset?
    can someone please tell me how 2 fix it, and i have the via drivers installed, and videocard drivers updated
    Rig:
    AMD Athlon T-Bird 1.333 Ghz @ 266 FSB
    MSI K7T-266 Pro2 w/ Via
    ATi All In Wonder Radeon 32 Meg DDR Ram
    256 DDR PC2100 Ram
    NEC 16X DVD
    MSI 40x12x48 CD-RW (defective BTW!! grrr)
    Quantum 40 Gig 7200 RPM HD

    http://www.msi.com.tw/program/service/forum/index.php?threadid=1131&boardid=13&styleid=1  

  • KT266 Pro2-RU + mobile barton XP2500+M

    There's been a lot on this forum about the modded bios etc which enables the 6380 v2 motherboard to be compatible with the later T'bred and thornton chips.
    But searching through the maze of users' comments I've failed to locate anything saying that it is also compatible with the Barton chip, specifically the mobile Barton chips.
    I currently use a 2 year old Thunderbird 1200mhz chip, and would like to upgrade to a Barton 2500+ mobile chip, as it's the only 266mhz Barton chip I can find in the UK. I assume that I cannot use a 333fsb chip on my mobile, unless it is unlocked an I can move the multiplier high enough?
    I am utterly confused with the products that AMD have on offer. Is there anywhere where their performances have been compared? Is a T'bred 2500+ significanly slower than a Barton 2500+ because of the 512kb L2 cache?
    Cheers

    Hi all for again,
    I have K7T 266Pro2 - RU (MS-6380)
    What is the max speed of processor/fastest procesor, which can I safely use? - I would like stable system too - I want NOT using overclocking...
    1) If I make all mods to work with Thoroughbred (update to BIOS 3.7, remove C37), it will work with Thorton?
    2) What is the max configuration (speed) with K7T 266 Pro2 - RU? I read much in this forum, but I'am very foggy. Is it 133 * 15 or 133 * 17.5 (with set auto in BIOS or HOW?)
    What is the max configuration without doing some special mods (e.g. on processor) only with changing settings in BIOS and with removed C37?
    What is the best and fastest choice of processor?
    Many thanks for any advice and very sorry for my very poor english.

  • KT266 Pro2 to Nforce 2??

    hey,
    Currently I have an MSI K7t266 pro2 mobo and a geforce 4 ti 4200. I was wondering if i should upgrade to a MSI nforce 2 and set up ddr 333 dual channel. I am just looking for peoples opninons. Has anybody done this? Was the performance jump big or just a little bit. Thanks for your input.

    also, i currently have 2 256 sticks of ddr ram. one is kingmax and im gonna get another stick of 512 kingston. Will it work 256+512 on dual channel? Thanks!
    I was wondering cause I got 1536 on 3dmark2k3 and thats what everybody on nforce 2 board are saying also

  • KT266 PRO2 RU, can it lock AGP/PCI??

    There is some way to lock the AGP/PCI bus in this mobo?
    Greetings.

    nope it just uses dividers like all via boards

  • How To Overclock on KT266 Pro2

    i was wondering how i would be able to overclock my AMD Athlon 1.333 Ghz to a higher speed w/ my mother board... where do i go in the bios? and how do i set it up?
    wat about fan? should i get a fan that would cool down a CPu of the same speed? ie: Thermal Take fans that support up to a 1700+ Ghz for example, could i overclock my system up to 1700+ Ghz?
    Thanks

    Thanks rob, u helped  :D
    but out of curiosity, wat about that program that MSI has that works in windows? i dont recall the name, fuzzy logic i think? is that anygood ?
    and about overclocking.,.. how do i go about overclocking, i know how 2 change the clock speed, but wats this about vcore? my AMD guy told me i should leave it a 1.71 or something... how do i go about changing that, and wat should i leave it too?
    BTW, im buying the Volcano 9 this weekend, so i would like to overclock by this weekend
    Thanks Alot

  • K7T266 Pro2-RU BIOS flashed, now dead :panic:

    Hi
    I have a new AthlonXP 2400+ and tried to run it on the K7T266 Pro2-RU board with no success. I thought it was a BIOS problem because the XP2400+ is listed as supported and flashed the BIOS with my old XP1700+. I took this package to flash the BIOS: http://download.msi.com.tw/support/bos_exe/6593v16.exe
    Now my PC is dead!
    I saved the old BIOS to a floppy - is there any chance to reanimate the board again?
    P.S.: I recognized that I used a KT266 Pro2-R (not K7T266-RU) BIOS to flash.
    P.P.S.: A local shop offers flashing of the BIOS chips. How can the chip be removed from (and inserted again to) the mainboard?

    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=29
    dont appear you got the right bios
    http://www.msi.com.tw/html/support/bios/note/boot.htm
    if its still reading the floppy drive
    http://www.badflash.com if its not

  • Experiences mixing DDR memory modules

    Would you people post here experiences mixing DDR memory modules in order to help me/others take buying decisions?
    I currently have a PC2100 256MB Samsung module and a MSI KT266 PRO2 and want to buy a new module.
    As I  cannot find one similar to the one I already own want to assign a success likelihood before taking my decision.
    Thanks in advance Gustavo.-

    Had a similar problem afew week's ago. I've got 2 identical stick's of 256Mb Samsung original DDR333 Cas 2.5, decided to upgrade to 1Gb and bought a stick of 512Mb Geil DDR333 (GL2000 Chips) Cas 2.5 for 45 quid. Installed the Geil in slot 2 (with the samsung sticks in slots 0 and 1) booted up o.k
    bio's and windows detected the ram just fine.
    After rebuilding the windows page file I started to test the extra ram by running 3dmark 2001 but kept getting  BSOD's (Irq's less then..., Page faults in non ...etc) mid way through the test's. I went in to the bio's and relaxed the ram timing's to spd, no change. Increased the ram voltage's, no change.
    So I thought I'd do a fresh install of windows, but 3/4 of the way through copying the files off the windows cd I kept getting 'can't copy xxxx file from the cd', tried cleaning the cd, tried a backup cd same problem, took the samsung memory out and just put the Geil stick in slot 0, the system wouldn't even boot, but with the samsung stick's in on there own window's installed o.k. I tried the Geil stick in another system, which booted up without a hitch. So finaly I just took the Geil stick out and gave it back, the suppliers tested it and found it to be o'k and charged me 20 quid for the privalage, Ba%&!%@s.
    Last week I borrowed a stick of 512Mb Twinmos DDR333, same problem's as the Geil. Seem's like they don't make them like they used to and I'm doomed to 512Mb with this board.
    AMD 2400XP @ stock
    Akase 821 H/F
    MSI KT4 SR with v1.3 Bio's
    2x 256MB Samsung DDR333 Cas 2.5 @ stock
    80Gb WD 7200 Hard drive on Ide 3
    Plextor 40x CD Writter
    16x Lite-on DVD
    MSI Geforce 4 MX440
    D-Link 10/100 NIC
    Q-tec 450W PSU @ > 200W Combined
    Windows XP with SP1

  • Can´t install cd recorder in linux... help please, newbie

    hi,
    is there any problem with via chipsets and cd recorders in linux??  
    I´ve been trying to install a linux distro in my pc ( see end of post for specs), but i haven´t succeded in installing my cd recorder. I´ve tryed RedHat 8.0 and Mandrake 9.0. In both of them i can´t boot if i have the cd recorder connected... it crashes when detecting the drive. I know the recorder works, i've got friends who use it ok with linux.
    Currently i have installed Mandrake 9.0 with the cd recorder disconnected. I noticed my all my friends with linux have intel machines, and they don´t have to do anything, it boots correctly and install without any problem. So i started thinking it might be a chipset support problem. I got to the viaarena page where i found a "manual" for installing cd recorder in linux. I tried to do that but i keep getting into problems... i'm new to linux and i don´t know much so that might be the real problem here :o  
    i'll try to explain my doubts, what i did and what problems i run into.... if someone would be nice to explain me how to solve them, in a detailed way
    I followed the "readme" instructions for installing a recorder after the Mandrake 8.2 is installed ( it didn´t have any for 9.0 ). I edited the modules.conf and lilo.conf files as i should. But i did run into some doubts: the modules.conf file didn´t have any ide section like the readme said  ( it had no sections at all) so i added the two lines at the bottom of the files. In lilo.conf i had to delete the append that already existed to add the hdd=ide-scsi line.  
    I shutdown the pc, connect the recorder and start it again. The os detects all drives but crashes again after doing checking the modules dependencies...
    Did i do something wrong when editing the files?
    And i didn´t quite understand  all the "readme", in order to install the recorder do i also have to the "ide-scsi" to my cdrom and dvd drives, or only to my recorder??
    In linux does the recorder have to be in a specific ide ( master/slave ) position in order to be installed?
    and please tell me that it has nothing to do with my board and that it is just me doing something wrong..
    thanks for any help, and sorry for the long post but i thought i´d better explain all
    my pc specs:
    AMD XP1800+
    Msi KT266 pro2-ru ( Via kt266A )
    256MB DDR266
    Seagate 40GB ata100 7200rpm ( primary master )
    Hercules Kyro 2 64MB/tv-out
    SB Audigy
    LG 52X cdrom ( secondary master )
    Samsung 16x DVD ( primary slave )
    HP 8200 recorder ( secondary slave ) , currently off
    Sony HMD-A230

    Quote
    Originally posted by kmolazz
    I followed the "readme" instructions for installing a recorder after the Mandrake 8.2 is installed ( it didn´t have any for 9.0 ). I edited the modules.conf and lilo.conf files as i should. But i did run into some doubts: the modules.conf file didn´t have any ide section like the readme said  ( it had no sections at all) so i added the two lines at the bottom of the files. In lilo.conf i had to delete the append that already existed to add the hdd=ide-scsi line.
    You will need to add that line back in if you want it to work as a recorder once you get it to boot. CD burners in linux use scsi emulation. You may also need to add a similar line from your CD reader too as most burning software for linux uses scsi emulation for that as well.
    I shutdown the pc, connect the recorder and start it again. The os detects all drives but crashes again after doing checking the modules dependencies...
    I didn't have to add anything in modules.conf to get mine working. Normally if it is crashing during modules.conf it means it can't find the module. Do you know which module it is looking for? What did you add to modules.conf?
    Did i do something wrong when editing the files? Maybe. What did you change in them?
    And i didn´t quite understand  all the "readme", in order to install the recorder do i also have to the "ide-scsi" to my cdrom and dvd drives, or only to my recorder??
    In linux does the recorder have to be in a specific ide ( master/slave ) position in order to be installed?No. But it may help if the CDROM and burner were on the same port. Sometimes can have a conflict with DVDs.
    and please tell me that it has nothing to do with my board and that it is just me doing something wrong..
    It has nothing to do with your board. If it works in windows it should work fine (or better) in linux.
    thanks for any help, and sorry for the long post but i thought i´d better explain all

  • Low usb performance on KT4V

    Hi,
    I upgraded from KT266Pro2A to KT4V. On my previous system I was able to achieve 25fps capture with my webcam (usb 1.1). Now I can reach at most 15fps. Is that a driver issue or so? All the other settings are same with the old system.
    KT4V
    Duron 800@810MHz
    256MB DDR 2100
    Win 2K & Win 98
    Via 4in1 4.43
    BIOS rev 1.8
    Thanks

    Quote
    Originally posted by jkesa
    Run, yes,  but at full speed? I heard usb 2.0 can be touchy, so if you can get the cables cheap enough (I get 2 USB 2.0 cables with 24kt gold contacts at Sams Club for $6.98    it might be worth a try.
    My situation is: I have a webcam (FlyCam 300K) which has been bought before there were any USB2.0 capable mainboards available. I have been using a MSI KT266 Pro2-A board. The webcam were connected by using its std. cable (it is not a replaceable cable, just fixed). By using virtual dub I was able to capture 25fps @ 320x240 resolution (lower fps at higher resolutions due to the capability of the webcam). Then my mboard broke and I bought a KT4V. I am using both Win2k and 98se on my system. I have loaded all chipset and USB2.0 drivers (even though I will never need usb2.0 soon). All the other hardware and software except the motherboard itself are the same with the old system. No sub cables are used btw the camera and motherboard.
    Now I could not get the point in using an extra usb2.0 rated cable. My webcam has nothing to do with usb2.0. Do you mean that Via's usb2.0 chipset offers low performance even on usb1.1 systems?
    Thanks.

  • Via bus master ide drivers for k7t m/board

    bought machine second -hand without m/b disk.trying to install 4.1 soundcard but no response.error msg says no drivers in place for via bus master ide.any help?

    Hi,
    try downloading and installing the chipset driver first if you've not already done it. Saying it need an IDE Bus Master Driver, the sistem seems to search them!
    if your MoBo is one of these
    • KT266 Pro2-U (Standard Version)
    • KT266 Pro2-UL (Onboard Lan Function)
    you can try this file
    http://download.msi.com.tw/support/dvr_exe/VIAHyperion4in1446vp6.exe
    (it cames from the MoBo page in this site:
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=386&MODEL=MS-6593 )
    Dario

Maybe you are looking for