KT3 Ultra 2 Keyboard lock-ups

I have a problem I haven't seen the answer to. Just built a PC with MSI KT3 Ultra 2, 2000XP processor, GeForce4 Ti 4200 64 MB vid card, 256MB, Windows ME. System has been stable for about 2 weeks now, but yesterday and today it has locked up the keyboard while web browsing (no other programs running). Not sure what is occurring. I have an intake and 2 exhaust fans and temps appear to be well with in acceptable ranges. After this occurs, windows will lock-up on reboot at the ME splash screen. Then sometimes, the pc wil reboot on the following restart fine. Other times, it locks up again with an illegal division error after the splash. No programs or hardware added lately that would have caused this.

The second system has a 330 watt enermax power supply. With the new system I put together, I put virtually the same board (MSI KT3 Ultra 2 with bluetooth and RAID), everything is the same as my first system (except the KT3 Ultra-ARU) and the stability is fine. So, I'm reasonably confident its not the power supply.

Similar Messages

KT3 Ultra ARU Lock up

My sig has everything I know about my computer.
I usually at 47 deg CPU and 42 System
the Hottest is 50 deg and 45 system and it did not
lock up.
It seems very arbitrary. No program or game etc. specificly is opening or closing at the time of lockup.
Sometimes i am AFK and it will be locked up when I come
back.
My cursor pointer will move around the screen however.
Help ah. What else can I check??
Thanks for any help.

You can have a look at my hardware below...
Chassis: Antec 1080B (300w PSU / 180w COMBINED)
Mainboard: MSI KT3 Ultra ARU
CPU: AMD Athlon XP 1800+
Display: ABIT Siluro GF4 Ti4200 AGP 4X
DVD/CD-RW Combo: HL-DT-ST RW/DVD GCC-4120B
Floppy: Panasonic 1.44MB
HD: Quantum Fireball Plus/AS 30.0GB UDMA 100
Keyboard: Microsoft Internet Keyboard Pro
Monitor: KDS Visual Sensations VS-190
Mouse: Microsoft USB Wheel Mouse Optical
NICs: 3Com 3C900B / DLink DFE-530TX
RAM: Micron DDR 266MHz (2x256MB DIMMs)
Sound: Avance AC'97 Audio
I'm having similar problems where my system becomes very unstable at higher bus speeds. However, I have ordered a new PSU today as a solution to this problem. Basically, CPUs and video cards are much more demanding and the more devices you have in your computer the more power you're going to need. I recommend purchasing the Enermax EG465P-VE (FCA) 450W ATX PS. It has a higher amperage rating and will most likely solve your problem.

MSI KT3 Ultra-ARU video lock-ups

Hello,
I have a 3 month old MSI KT3 Ultra-ARU. I am running Windows XP Professional and I am having a periodic lock-up where the screen will show blinking colored blocks and the system will freeze. Sometimes just hitting reset will cure the problem. Other times, hitting reset will create two vertical stripes of colored blocks scrolling down the screen. I have used the board on two entirely separate systems (One with AMD Athlon 2000+, Gainward GeForce 4200, 512 MB Samsung 2700 DDR, Western Digital Expert HD (tried both IDE #1 and RAID controller) (Other System, Athlon 1800+, a different Gainward Geforce 4200, 256 Crucial 2700 DDR, an older Maxtor hard drive). In either system, every once in a while, the system will freeze as described above (it has happened in Netscape 7.0, Microsoft Word 2000, America's Army game).
I have played around with the bios settings, reformatted hard drives, tried various revisions of the nvidia display drivers, swapped out video cards, etc. Any ideas? Do I have a bad board? Do I need to flash the BIOS? If the board is bad, what do I need to do to return it?
Thanks,
Matt Gumaer

The second system has a 330 watt enermax power supply. With the new system I put together, I put virtually the same board (MSI KT3 Ultra 2 with bluetooth and RAID), everything is the same as my first system (except the KT3 Ultra-ARU) and the stability is fine. So, I'm reasonably confident its not the power supply.

Kt3 ultra and 9600xt fast write

Amd Barton 2500
dr. thermal ti-77n
Kt3 Ultra standard mobo w/5.7bios
Antec performance II sx835II case w/350 psu
Corsair 512 2100 x3
Ati 9600xt
Audigy ZS gamer
as some of u may be aware the 9600 family of cards are very picky about fast writes. In order to run games without lock ups/crashes i must enable fast writes. The problem is that when i do, i get corrupt text, lines around my cursors, video lag etc etc. I recently switch to a barton 2500 that is running a 1.87ghz at 133fsb, before i ran an 1800 that did not have any of these problems with fast write enabled. bios and xp recognixed it as a 2500+ and i have the ratio set to auto and memory set to HCLK. I tried varios drivers for the gfx card and all produced the same results. Also tried all combinations of bios fast write on gfx control panel off, on etc. any ideas?
TIA
-leo
pic of lines/box around cursor

fast write disabled = game willl lock, the 9600 family of cards are notorious for this, i was able to fix my corrupt text and cursor problem by moving the slider under troubleshooting in the ati panel down a notch. in game im still seeing some problems though, hopefully the game specific forums can give me some help. thiis is really annoying because the dam game ran fine with my 1800 i went to the 5.09 drivers on the reccomendation from another forumite.
screeny to show in game problem for those that care
www.theoldschoolers.com/Forums/uploads/post-11-1134154170.jpg
anyways this is more specific game related matter now, but i figured id post up a follow up for u guys anyways

KT3 Ultra-ARU not work with ATI 9600pro?

Hi,
I have recently(yesterday) bought an ATI 9600pro, to upgrade my old GF2pro. As the title says, I have the KT3 Ultra-ARU(MS-6380E)
There seems to be lockup problems that involve only certian games and the ATI DVD player. In all instances the lock ups happen when the mouse is moved. With respect to the ATI DVD player, it will lock if the mouse is moved over the video window.
I have tried a few things but nothing works, so I am posting here to try and see if someone knows something and I will contact ATI in a few hours, or maybe tomorrow.

For via chipset (kt333 based msi kt3 ultra-aru) i can now obtain full hardware acceleration and 100% stable for c&c generals game by:
1) download and install latest catalyst 3.7 driver/control panel/samartgart from ati.
2) disable fast-write in bios..
3) go to c:programsati technologyati control panel and execute smartgart
4) enable - pci read/write and agp read.
5) disable - agp write (default in my case was on causing the problem).
6) "apply", reboot, then "ok".

KT3 Ultra 2R + Barton 3000+

Hi all..
Hope someone can help.
I have a KT3 Ultra 2R board with the following stats:
Athlon XP (Barton) 3000+ FSB 166 CPU
CoolerMaster HHC-001 heatpipe H/sink with 80mm fan
Antec 520W PSU
2 x 100 ATA Maxtor Viper 80Gb HDD's with 8Mb cache each in striped RAID array
Asus TI 4600 Ultra 128Mb V/card
Audigy S/card
Lite-on CD/RW
Lite-on CD/DVD
2 x 512Mb Corsair XMS 3000 DDR Ram (333 and above) with aluminium heat spreaders
Lian-Li PC70 Tower case with 6 x 80mm fans
Rounded cables throughout
Win XP + SP1
The Problem:
This system worked fine with an Athlon XP 2200 CPU and I read MSI's CPU support list and saw the KT3 Ultra 2 6380E supported the Barton XP 3000+ CPU's so I bought one. :P
At first I had trouble booting on the 5.7 version bios, with the lock ups throught the bootup process. I reset the bois to the defaults and slowly worked up the settings using the recommendations in the forums.
At the moment, the system will boot up with fast command set to normal, no agressive DDR timings, 1T command disabled, fastwrite disabled, agp read/write disabled and SDRAM set to SPD (HCLK).
My 3DMark01 & 3DMark03 scores are lower than when I had the XP 2200 CPU installed and the SiSoft sandra results are the equivalent of a Athlon 2000. MSI says the board supports the Barton 3000+, but at what cost ??? :O
The system is very unstable and and requires on average 3 boots to boot up successfully. The 3DMark03 test often locks up mid way.
Any help or the settings MSI or you used to achieve their results would be VERY helpful. Please Help... ;(

I have had a similar problem running my kt3 ultra2 (non raid) at 166 fsb. In mid april I bought a 2600+ 166 fsb athlon to upgrade my system from a 1.2 ghz athlon. I bought some new pc2700 crucial ram to go along with the processor. I had also recently bought a radeon 9700 pro in late march, and a 1.2 athlon would just be a waste of this great vid card. I had been running fine with the radeon and the 1.2 athlon with the msi 5.7 bios and 4.43 via 4-in-1's.
I battled this problem for weeks. I bought a new antec 550 watt PSU, corsair xms 3200 ram, and new antec tower case trying to find out if the problem was ram, power or heat. I should also note that turning on spread spectrum helped a little in stability. Setting it to .50% made it stable in windows and games, but the computer would not turn on if shutdown unless I cleared the cmos. No setting besides this had any effect on stability. Even conservative ram timings. I was about to buy an Asus a7n8x when I realized that I had once run my old cpu and ram at 166 fsb when I had the 5.6 bios a couple of months back. I did not keep it like that in fear of damaging the ram while overclocked.
So I reflashed to 5.6 which still supported the 2600+. That finally worked almost perfectly, although I still have to keep spread spectrum at .25% to be stable (which is odd, people say that is supposed to hurt stability). So in my situation, it was the bios that was faulty. I have had some very ramdom crashes to the desktop (3 of them) in games and one hardlock with a blank bluescreen in unreal2. This is over a span of a month. So it is not perfect. It might be the display drivers causing this, which I have recently upgraded, or I might need to back off my ram timings which are at 2-2-2-5 which this ram can handle easily at 166. 3dmark has yet to crash. Prime 95 passed when I ran it for 30 minutes. Im going to run prime 95 today and see if it will run for like 12 hours stable. Im still looking into getting a new nforce 2 mobo, however (abit or asus).
I hope this helps your situation, you should give it a try. Although, the 5.6 bios does not support the 3000+. It might still work, it will maybe just not show up as a 3000+ in the bios, but as a 2.17 Athlon XP.
I think MSI should be made aware of this possible 5.7 bios fsb instability. Why spread spectrum seems to be related in my situation, is really odd also.

MSI KT3 Ultra ARU 5.7 BIOS and SoudBlaster Cards - Audigy

I have flashed my BIOS to 5.7 Version and my sound card start to make a lot of noise (crackling) when play AC3 or DVD. If you dont want to use the new AMD CPU 333 FSB you dont need to flash the BIOS - I have Flashed to 5.6 again but, if you want to use a 333 FSB CPU you can flash the BIOS to version 5.7 and if have sound problems use the PCI latency patch for VIA chipsets.
VIA chipset MotherBoard owners who have through all of the above and still have sound problems with their Soundblaster cards, might want to look into the PCI latency patch for VIA chipsets - get it here:
http://www.georgebreese.com/net/software/
(scroll down the page there just a little to get to it).
There's also a similar page about resolving sound problems on Via chipset based computers here:
http://www.deinmeister.de/mvp3_zlt_e.htm
I hope this post help somebody
Mário Silva from Beja - Portugal
My System:
MSI KT3 Ultra ARU
Athlon 2400+
512 Kingston PC2700 DDR SDRAM
MSI Geforce4 Ti 4200
SoundBlaster Audigy
Windows xp Pro SP1
400W PSU
Creative Drx3
Pinnacle PCTV pro
HDD Maxtor 80 GB UDMA 133
DVD Pioneer slot in
RW Samsung 48x16x48
Creative WebCam Go
UPS 500 VA
Monitor Sony 19" E400E

Since my chip is an unlocked, I cannot easily run it at the default, but I can underclock it. At 100x6.0=600mhz, USB does not work, as well as 100x12.5. Same with 133x6.0 and 133x12.5. It appears to make no difference underclocking or overclocking.
I downloaded the right BIOS listed on MSI's KT3 Ultra-ARU page. I don't think the BIOSes are different anyway, since the same files, changelog, and etc are also listed for the Ultra-2 board.
A thing to note, that this is the onboard VIA-controller USB ports doing this. My Ultra-ARU's NEC-controller USB 2.0 ports work fine in both Win2k and Linux if I hook my mouse and keyboard up in those. This is not an ideal solution for me though.

MSI KT3 Ultra ARU & GeForce 3 TI200

A little prob:
When I run my GF3 in AGP mode, all my games hang after playing 1 min. Then when I change the "Via Tech CPU to AGP-controller" to "PCI standard PCI to PCI brigde" thereby running my GF3 in PCI-mode everything runs fine. Then I went into "dxdiag" and saw that "Acceleration of AGP-struktur" was not availble. So I was thinking, am I looseing enything by running the GF3 in PCI-mode and is it the MSI or the GF3 that is causeing this problem.
I have tried all the VIA 4in1 drivers and they did not help.
My specs:
MSI KT3 Ultra ARU
Athlon XP 1900+
Palite Daytona Geforce 3 TI200
Windows XP pro

i have the kt3 ultra with a geforce 3 ti200 and it runs flawless.. i use the det 30.30 drivers. one thing i noticed with geforce 3 cards is if i have my agp apperature set to anything but 128 games will freeze and get all kinds off lock ups. if i were you i would look around this forum for the bios setup guide for the kt3 ultra! and set your bios according to that guide
if you cant find it here goto http://www.amdmb.com and go to the msi forum there and the set up guide is there
hopefully that helps!!!!

PC Component power requirements on a KT3 Ultra-ARU: ANSWERS - At last

G'Day Folk,
First, my PC specs are as below in my sig.
Second, I know this is an old motherboard, but I would like to keep it going, and make the best of it for another year or so. Any help would be greatly appreciated, and would help two other users!
Symptoms:
Minor stability and performance issues, mostly in games, simulators, or doing high resolution photographics processing. I bought three machines with similar specs in 2002, for my brother, father, and myself. Each has had some hard to nail down, intermittent problems. My brother's PC has had a new motherboard and processor after failure of the KT3, but still has some niggling problems. He also has an XP 2600+ running at 65C !
More recently I have been able to reliably reproduce graphics problems in Empire Earth II, Serious Sam, and Halo. Specifically, I can create the problem in an Empire Earth II game by running a saved game and looking at a specific spot on the map. The screen shows tearing, and eventually goes black, returning to normal dispaly when I move to a different part of the map. In certain Halo games I could cause the problem by looking in a specific direction. I assume this is because what is being displayed is using different or more graphics processing features, although it is not apparent what they may be from the content of the view.
Being able to reliably reproduce the problem allowed me to actually analyse the cause.
Diagnosis:
After upgrading all drivers, and trying everything I could think of, as well as everything I could find on the web, especially in this forum, I have narrowed the problem down to the power supply. The clincher for me is that when I create the problem the 3.3Volt power supply line (rail) drops to as low as 2.45Volts! The +5V line also fluctuates and drops as low as 4.81Volt. This was measured using MBM5 and MBM5 Log. The usual voltages reported by MBM5 at idle are +3.3V rail = 2.99 to 3.01 Volt, +5V rail = 4.92 to 4.95 Volt.
Okay, so the +5V rail stays in spec (just), but the +3.3V rail is out of spec (+/- 5%) even at idle. It should be at least 3.135Volt.
I checked the voltages with and without the problem using an analogue volt meter, as software voltage readings are often low. The volt meter is a little slow to respond to the voltage fluctuations, but did confirm that at idle the +3.3V rail was less than 3.1Volt (out of spec), and with the problem occuring, dropped at least to 2.8Volt.
As you can see below my power supply should be able to handle all I throw at it. Topower isn't the greatest brand, but it does receive "satisfactory" in reviews on Tom's Hardware and such. I suspect it (and my brother's and father's) has always been weak, although age, or more powerful games may be highlighting the problem.
Solution:
Get a new power supply.
Not so simple these days, particularly if you want to upgrade in the future, with the move to powering components using the 12Volt rail. I want a power supply that will power my current +3.3V and +5V hungry motherboard, plus future 12V requirements, if possible. So I am doing a Power Audit of my PC, hence . . .
Questions:
I have collected power requirements for most of my components in Ampere by supply voltage. However, details are hard to lock down. I'll jump straight into specific questions.
1. The Athlon XP 2100+ draws a maximum of 89.9Watts into the Voltage Regulator Module (VRM), which converts it to the CPU supply voltage of 1.75Volt. (About 51Amps. Ouch!) If this is sourced from the +12V rail as suggested by the AMD Athlon Desktop Builders Guide, then this would be 7.49Amp, and would not effect the +3.3V and +5V rails unless the total power capacity of the supply is being exceeded. However, the CPU power source was changed from the +3.3V and +5V lines to the +12V lines around the time of the XP2100+. I don't know what MSI did on my motherboard.
Can anyone confirm which voltage rail is used to power the XP 2100+ on the KT3 Ultra ARU motherboard?
2. I have found average power usages for motherboards of around 25 Watt on many web sites, but can't confirm the power used by the KT3. Does anyone know the maximum current (Amps) for each voltage rail from the power supply for this motherboard?
3. Memory power requirements also vary a lot on the web. I'm using 10Watt each on the +3.3V rail for two sticks of 512MB DDR Corsair. Can anybody confirm this, for the KT3? (10W per stick seems to have been the standard since 128MB sticks came out!)
4. I have a GeForce 4 Ti 4600 AGP graphics card. (Okay, it's not an MSI, but the power should be similar across brands.) There are several threads that suggest that this card uses lots of +3.3V and +5V power from the AGP slot. (Wonkanoby?) However, none give actual Amps for each rail. Anybody know?
5. In case anybody knows, I can't find actual power for an Audigy 2 ZS either. Any suggestions?
As modern power supplies tend to have reduced +3.3V and +5V capacity in favour of +12V, I need to be pretty sure of the actual requirements on these rails before buying a new supply. I could just "go and by the biggest Antec I can find and don't worry about it", but I might find that it has the same problems my existing one does.
All help greatly appreciated. Selection of a new PSU could fix three PCs, mine, my brother's, and my father's.
PS: My apologies to those I told that this was a great power supply. Well, it has great specs, and the problems observed couldn't be tied to it until recently. Bummer really.
PPS: Sorry for the long post, but it's an interesting, and important topic, isn't it?
UPDATE: See post on 1st March, 2006 for response from vendors and updated table of component requirements.
Here is a copy of my signature in case I change it in the future, just for context.
MSI KT3 Ultra ARU (MS-6380E V1.0), AMI BIOS 5.7
AMD Athlon XP 2100+ Palomino 1.73GHz @13 x 133 FSB
2x Corsair CMX-512-3000C2 512MB 2-2-2-5-1T @333MHz
Leadtek GeForce4 Ti 4600 Winfast A250 Ultra MyVIVO 128MB (AGP)
Creative Sound Blaster Audigy 2 ZS
2x WD Caviar WD1200JB 120GB 7200RPM 8MB Cache,
each drive enclosed in a Scythe Silent Box Heatlane HDD Enclosure
CD&DVD Plextor PX320A & Pioneer DVR-A09P
Topower PSU 470W PFC 3.3+5V=235W +3.3V/26A, +5V/47A, +12V/28A
mCubed T-Balancer Fan Controller,
multiple quiet fans: Zalman, SilenX, Panaflo, Lian Li blower
Zalman CNPS6000-Cu & ZM-NB32J NB HS
~ 10-20C over ambient
Lian-Li PC-60 Case, WinXP ProSP2+

Try the link below, this will tell you what you need. After you added all you hardware and get the final power result add 50% to this and you will have the proper size P/S needed for your system. You can even make a list of future upgrades you want to do and that way you can see what P/S will work for you now in the present and what you would need in the future, just remember to add 50% to what ever total you add up.
For example, if the P/S calculator says you have a total draw of 279W then you would add 50% to this;
279+50%=418.5
http://www.extreme.outervision.com/index.jsp
Below I have pasted a piece that I made for determing P/S which may help you to;
Resets are a P/S issue and lock-ups are most likely due to your graphic card, with that said I will give you a table with which you can determine the proper P/S for your system and a little info just for info.
I must also add that never trust software to tell you your voltages, this includes the BIOs as the BIOs is just a piece of software. To properly check the voltage one must use a digi-VOM.
A 7200rpm HD draws around 20 watts, this 20 watts includes both the 5v & 12V rail.
HD and CD's generally are figured at 2 Amps per device, let’s brake this down some.
Spin-up: 12V x 1.3A + 5V x 650mA = 19W
Read/Write/Idle: 12V x 350mA + 5V x 700mA = 7.75W
Seek: 12V x 675mA + 5V x 725mA = 12W
Those would be typical for a 7200 rpm IDE drive. As you can see a HD requires more power at start-up then during actual operation. This is why sometimes a PC takes a few tries to start up before it will actually make a successful boot and once it boots to windows all seems well or sometimes a occasional restart, which would indicate a weak/ bad P/S.
Now to find the power used by the CPU you can check either AMD or Intel for the spec sheets on that CPU or you can follow this link that has tons of CPU ratings, CPU specs.
Some more basic mathematics… When a 12-volt circuit is drawing 10 amps, it is consuming 120 WATTS of electrical power. 12 Volts X 10 Amps = 120 WATTS.
This is the formula: P = E x I
P - Watt (power)
E – Voltage (electrical pressure)
I – Amperage (current flow)
Serial/PS-2 ports draw <35mA and if you have USB ports then they have a maximum of 500mA per port, again only if they are used- no use means no draw.
The PCI slots are allowed 5A of the +5V, 0.5A of the +12V and 7.6A of the 3.3V Max per slot, again that is if the slots are used. So if the serial ports, PS-2 and USB ports are being used you are looking at around 5A draw on the MB, which would be around 20 Watts.
So now we can add things up. (This is just an example of a basic system)
MB=20W
CPU= 60W, used as a norm.
HD=20W
CDRW=25W
DVD=20W
Graphic card=15W / newer GF4 and ATI 9000 and up= 35W
RAM 10 Watts per 128 MB
Network Card 5 Watts
Average per PCI Card 8 Watts
Total around 200W for this example.
Now this will fall on different rails and that is were things get tricky, because as you see in my above break down of the HD that a HD use's both the 12V & 5V rail. This is why it is important that the 12V rail be at least 18 Amps if you plan on having more then 1 HD and case fans. Then you have the 3.3V & 5V rails that need to be strong too, the 3.3v rail is actually not so important with newer DDR MB and today’s CPU’s as it is mainly supplying the PS-2 ports power as well as some device cards. Most newer MB use the 5v and 12v rails mainly to supply the demands of today’s devices.
Now this 200W is the bare min what is needed for things to run but in the real world you will want to add 50% to the 200W for your min P/S need, this allows room for spikes and heavy demands and a little head room to add hardware in the future.

KT3 Ultra2, XP2200+ lock up problems.

Hello there, I am having a lock up problem with my PC.
System Info;
MSI KT3 Ultra2 (6380E) (Non RAID)
Athlon XP 2200+ (.013 micron TB)
Enermax 350 Watt PS
Samsung PC2700 DDR (512MB)
Thermaltake Volcano 7 CPU cooler
Nvidia Riva TNT2 Ultra
And I am running Windows 2000 PRO.
Bios shows to be version 1 (I don't know how to check the version correctly) FSB is set to 133mhz. The PC runns stabile when set to 100mhx FSB, but when swithed back to 133, It locks while trying to run programs such as Norton AV 2003 , or SETI@home. Have not tried gaming yet do to this problem. Note too that in WIndows system info, processor shows to be AMD 1800+. Any advice would be greatly appriciated!! Thanks!! Jeepin_247 ;(

Those temps are definitly getting high. I can loop 3dmark for an hour and still only get up to about 43 c. If I understand you correctly you are running your cooler without and gease or thermal pad between your cpu die and cooler. That can definitly cause problems with heat transfer. I imagine your temperatures are continuing to rise a little causing lock ups. Apply some grease when you get it and your temps should drop a bit. A lot of people swear by artic silver. I am just using the standard gease that came with my cooler and it is working fine. I would probally use the artic silver if I started overclocking though.
There is a good sticky for bios settings in the MSI section at http://www.amdforums.com There sight is down right now so I can't provide the link. The setting are for the KT3-aru but they are good for the KT3 Ultra2.
Good Luck.

Total lock-ups with fan running - translate system.log file please!?

Hi, all. My late 2005 2.3 gig dual G5 has been experiencing random lock ups for as long as I can remember. My system is up to date and I have tested each pair of the 5 gigs of ram that I have and the system freezes with each pair. It can happen at any time, when I am doing absolutely nothing, for example, overnight. I am at my wits end!
Here's the system log file for the latest freezes. Can anyone tell me what's going on here??? I really need to get to the root of this problem. Thanks so so much in advance.
Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/Macintosh HD failed 89.
Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Macintosh HD, flags 524288, pid 62
Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: Started\n
Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: This service performs licensing functions on behalf of FLEXnet enabled products.\n
Apr 12 18:01:06 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:01:49 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:08:29 Marc-Weinbergs-Computer diskarbitrationd[69]: SDCopy [1056]:36091 not responding.
Apr 12 18:16:18 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:16:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 19:24:12 Marc-Weinbergs-Computer ntpd[191]: time reset -0.650307 s
Apr 13 01:05:45 Marc-Weinbergs-Computer ntpd[191]: time reset -0.496917 s
Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
Apr 13 07:15:03 Marc-Weinbergs-Computer postfix/postqueue[1778]: warning: Mail system is down -- accessing queue directly
Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
Apr 13 15:53:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 13 15:53:54 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 13 22:15:48 localhost kernel[0]: standard timeslicing quantum is 10000 us
Apr 13 22:15:47 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[63]: starting
Apr 13 22:15:48 localhost kernel[0]: vmpagebootstrap: 506550 free pages
Apr 13 22:15:47 localhost memberd[70]: memberd starting up
Apr 13 22:15:49 localhost kernel[0]: migtable_maxdispl = 70
Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.FTATASil3132E" from archive.
Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.Sil3112DeviceNub" from archive.
Apr 13 22:15:49 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Apr 13 22:15:49 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Apr 13 22:15:49 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
Apr 13 22:15:49 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
Apr 13 22:15:49 localhost kernel[0]: DART enabled
Apr 13 22:15:47 localhost DirectoryService[75]: Launched version 2.1 (v353.6)
Apr 13 22:15:49 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 001451ff fe1b4c7e; max speed s800.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:48 localhost lookupd[71]: lookupd (version 369.5) starting - Sun Apr 13 22:15:48 2008
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: Extension "com.microsoft.driver.MicrosoftKeyboardUSB" has no kernel dependency.
Apr 13 22:15:49 localhost kernel[0]: AppleSMUparent::clientNotifyData nobody registed for 0x40
Apr 13 22:15:49 localhost kernel[0]: Security auditing service present
Apr 13 22:15:49 localhost kernel[0]: BSM auditing present
Apr 13 22:15:49 localhost kernel[0]: disabled
Apr 13 22:15:49 localhost kernel[0]: rooting via boot-uuid from /chosen: 82827EDF-0263-3B93-BEED-4B114E820B85
Apr 13 22:15:49 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Apr 13 22:15:49 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@9/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/ST3320620AS Media/IOApplePartitionScheme/AppleHFS_Untitled1@10
Apr 13 22:15:49 localhost kernel[0]: BSD root: disk0s10, major 14, minor 12
Apr 13 22:15:49 localhost kernel[0]: jnl: replay_journal: from: 8451584 to: 11420160 (joffset 0x952000)
Apr 13 22:15:50 localhost kernel[0]: AppleSMU -- shutdown cause = 3
Apr 13 22:15:50 localhost kernel[0]: AppleSMU::PMU vers = 0x000d00a0, SPU vers = 0x67, SDB vers = 0x01,
Apr 13 22:15:50 localhost kernel[0]: HFS: Removed 8 orphaned unlinked files
Apr 13 22:15:50 localhost kernel[0]: Jettisoning kernel linker.
Apr 13 22:15:50 localhost kernel[0]: Resetting IOCatalogue.
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 3
Apr 13 22:15:50 localhost kernel[0]: NVDANV40HAL loaded and registered.
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::start 1
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::end 1
Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::adjustThermalProfile start
Apr 13 22:15:50 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:78
Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:79
Apr 13 22:15:51 localhost lookupd[86]: lookupd (version 369.5) starting - Sun Apr 13 22:15:51 2008
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 21611008 to: 7857152 (joffset 0x952000)
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 673280 to: 24382976 (joffset 0x952000)
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 3890176 to: 6294016 (joffset 0x7d01000)
Apr 13 22:15:51 localhost diskarbitrationd[69]: disk0s10 hfs 82827EDF-0263-3B93-BEED-4B114E820B85 NewestSeagate /
Apr 13 22:15:52 localhost kernel[0]: NVDA,Display-A: vram [90020000:10000000]
Apr 13 22:15:52 localhost mDNSResponder: Adding browse domain local.
Apr 13 22:15:53 localhost kernel[0]: hfs mount: enabling extended security on Maxtor
Apr 13 22:15:53 localhost diskarbitrationd[69]: disk1s3 hfs 0DBE2113-B1F5-388F-BF70-2E366A095330 Maxtor /Volumes/Maxtor
Apr 13 22:15:54 localhost kernel[0]: NVDA,Display-B: vram [94000000:08000000]
Apr 13 22:15:54 Marc-Weinbergs-Computer configd[67]: setting hostname to "Marc-Weinbergs-Computer.local"
Apr 13 22:15:54 Marc-Weinbergs-Computer /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Apr 13 22:15:56 Marc-Weinbergs-Computer diskarbitrationd[69]: disk2s3 hfs 971CABB3-C211-38FC-8E91-6B4F8EA5FA20 B08-09-07 /Volumes/B08-09-07
Apr 13 22:15:56 Marc-Weinbergs-Computer loginwindow[110]: Login Window Started Security Agent
Apr 13 22:15:57 Marc-Weinbergs-Computer kernel[0]: AppleBCM5701Ethernet - en1 link active, 1000-Mbit, full duplex, symmetric flow control enabled
Apr 13 22:15:57 Marc-Weinbergs-Computer configd[67]: AppleTalk startup
Apr 13 22:15:57 Marc-Weinbergs-Computer TabletDriver[119]: #### GetFrontProcess failed to get front process (-600)
Apr 13 22:15:59 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:01 Marc-Weinbergs-Computer lookupd[123]: lookupd (version 369.5) starting - Sun Apr 13 22:16:01 2008
Apr 13 22:16:01 Marc-Weinbergs-Computer kernel[0]: HFS: Removed 2 orphaned unlinked files
Apr 13 22:16:01 Marc-Weinbergs-Computer diskarbitrationd[69]: disk3s3 hfs CDA8BCC5-0CE4-33E8-A910-4B0952DBC230 FullBU-09-07 /Volumes/FullBU-09-07
Apr 13 22:16:04 Marc-Weinbergs-Computer configd[67]: target=enable-network: disabled
Apr 13 22:16:05 Marc-Weinbergs-Computer configd[67]: AppleTalk startup complete
Apr 13 22:16:09 Marc-Weinbergs-Computer TabletDriver[237]: #### GetFrontProcess failed to get front process (-600)
Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: exited with exit code: 253
Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: 9 more failures without living at least 60 seconds will cause job removal
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0L6LR', reports it is functioning at a temperature of 95.0F (35C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0L6LR', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0LGS4', reports it is functioning at a temperature of 100.4F (38C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0LGS4', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '9RV000FC', reports it is functioning at a temperature of 95.0F (35C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '9RV000FC', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', reports it is functioning at a temperature of 89.6F (32C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', appear to still be available. (Total Available: 63) (Use Attempts: 0)
Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
etc.

Hi-
The machine seems to be having trouble with loading certain drivers, but, as this isn't a crash log, and doesn't show the "hang-up" or freeze, it's hard to tell.
Noted possibilities are:
-Microsoft keyboard (possible USB power problem)
-firmtek driver (from archive) questionable due to the "archive" annotation
-Wacom tablet driver, causing system problems
Running in Safe mode without freezes would help to determine if one of these drivers is the problem.
Other possibilities are outdated drivers, or simply a need to reinstall the OS.
If unnecessary, removing the driver(s) would be a good idea.
External USB and Firewire devices are all suspect, should all be disconnected, revert to Apple keyboard, and test system performance. Adding one device at a time, and testing each will be necessary to clear each device.
I have experienced system trouble when a Wacom tablet was not connected, but the driver was left installed.
Disabling the driver from Startup items may be necessary to test without the Wacom tablet connected.

WRT54GS LOCK-UPS

I currently own a version 6 wrt54G and version 5 wrt54gs and can only eliminate intermittent lock-ups on both routers by downgrading to the earlier version of firmware that shipped with these routers. 1.50.8 version of the firmware for both hardware revisions seems to have ZERO issues with connectivity. Both routers have been running for 2 weeks flat now with ZERO Disconnects. As soon as I update to 1.52.5 the problem reappears so go figure. Anything after 1.50.9 thru to the latest 1.52.5 firmware revisions produces exactly the same connectivity issues. My last conversation with linksys customer support resulted in and I quote "YOU ARE NOT SUPPOSED TO DOWNGRADE TO AN EARLIER FIRMWARE DUE TO THE FACT THAT YOUR ROUTER WILL CATCH FIRE! Never heard anything so absurd in my entire life! No response from a Linksys Tech or Forum Specialist to this post obviously concludes that in fact this is a FIRMWARE RELATED issue and Linksys is doing nothing at all to rectify it. Also I have noticed that virtually all the European Linksys Download sites for this revision of router don't go above 1.50.6 which is the firware that shipped with my router. BULLDOG

I meant xorg-server 1.6.x
I've used this script to reinstall from cache:
pacman -U /var/cache/pacman/pkg/xorg-server-1.6.3.901-1-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xorg-server-utils-7.4-7-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xf86-video-intel-legacy-2.3.2-3-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xf86-video-vesa-2.2.0-1-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xf86-input-evdev-2.2.5-1-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xf86-input-keyboard-1.3.2-2-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xf86-input-mouse-1.4.0-2-i686.pkg.tar.gz

P7N SLI Platinum lock-ups

My specs:
Q6600 stock speed
Kingston HyperX pc8500 2x 1gb. I manually set it to it's rated timings, voltage and frequency. I have also tried different ram, from Exceleram and it makes no difference.
2x Asus EN8800GT 512mb cards (tried using just one card too, tried switching to a different 8800gt card from sparkle too, no change.)
HDD: Have tried several hard drives, pata and sata from probably all the manufacturers, i dont see why i need to post their specs since they problem persists nomatter what hdd i use.
Windows XP SP3 proffessional.
nothing else is in the system, i removed every piece of hardware, like sound card, optical drive, etc. to isolate the problem.
Power supply: Thermaltake ToughPower 700W
BIOS Version: the beta bios posted on this forum that supposedly fixes the video corruption bug (it doesnt). Also tried 1.0 and 1.1
The problem: random lock-ups. Sometimes it doesnt happen for 2 days and then BAM! Its happening every 15 minutes now. It might stop happening for another 12 hours and start locking up again. It only ever happens when im working in 2d applications like browsing, using messenger or IRC, watching videos on youtube or in a media player, or just moving files around or anything mundane like that. it once happened when i wasnt touching the keyboard or mouse at all, i was waiting for some files to finish copying over LAN. I also get the famous video corruption but it is EXTREMELY rare, like once a month. It crashed the last time the video corruption appeared, once i tried to click the player to pause, the system crashed. The system will never lock up while playing games, i play medieval II total war for days without any problems. The store i bought the p7n from tested it for me and they said it worked fine, but they used an ATI card so that may be a clue? Then again, they are really incompetent and didnt run the right set of tests, and ignored what i had told them about the nature of the crashes.
Detailed description of the events: System freezes, first everything except the mouse is frozen but if i try to click with the mouse, it freezes too and the screen flashes a black screen every few seconds. it never recovers and i have to shut it down by holding the power button for several seconds. some of the 2d graphics in windows get corrupted with artifacts, and the mouse does get heavily corrupted usually.
What i've tried:
I thought the mobo was defective but it isnt, i got a new mobo from the store and it has the same problem.
Tried working my way through every combination of memory timings, frequencies and voltages that i thought might make a difference but it has no difference on the crashes.
All the hardware works perfectly in my Asus P5N32-E SLI motherboard (i bought this msi mobo for some different reasons that i wont go into here), so theres nothing wrong with any of my components.
The only item i've not had the oportunity to switch with a different one is the power supply, but again, it works perfectly with all other motherboards that i've tried.
Is this possibly related to the video corruption bug? Does anyone have any idea when the next bios release is due? Please help, it sucks to buy an expensive motherboard that just doesnt work. i'll have to buy a 3rd sli mobo if I cant fix this.
PS: Is it not possible to regulate fan speed for sysfans connected to the mobo's fan connectors? My asus mobo had great fan speed controls in the bios, if this one doesnt have any such options, i call that ridiculous.

I appreciate your effort, guys. I've tried running the memory in 800mhz and on auto timings and on some other timings too (i was kinda desperate and i messed around with the memory configuration for days with no success), and tried auto volt (it gets set to 1.8 which the memory is rated for at 800mhz) and tried 1.9 and 2.0 and 2.1 and 2.2 and i've tried completely different memory modules too that i borrowed, and tried running in single channel with both modules and running just 1 module. none of these experiments had any effect on the crashes :\. But don't you think this could be related to the video corruption bug? I always thought it was, since this problem doesnt seem to happen for me when there is an ATI card in the system. Not that my 8800gt cards are defective in any way either, they are rock solid on my other motherboard.
I have one more theory, some weird inexplicable compatibility problem between this particular PSU and this particular mobo. Think it's a possibility? The psu is the only thing i have not switched out for another component, every other component i have switched for another one that was known to be working fine.
also, there is the extremely distant possibility that the issue is caused by an issue that the mobo might have with BOTH the kingston and the excelleram modules that i tried, however this seems far-fetched. but this problem is a fact and SOMETHING is causing it. i've eliminated almost everything i can think of.

Multiple Panics, Lock Ups and Freezes

My MacBook Pro running 10.8.3 has been having some random shut downs and lock ups lately, the latest of which took the internal boot drive totally offline. I was able to recover it after booting to my external recovery drive and running DiskWarrior 4 as Disk Utility simply said I needed to repair the drive before mounting it, but then said it was unrepairable after attempting to do so.
After the DiskWarrior repair, the Mac booted from it's internal drive like there was nothing wrong, but an hour or so later, I had another lock up where everything froze up and was unresponsive and then after a restart I got another hour or so before it shut itself down and then restarted itself, so I'm obviously less than thrilled with the situation.
This is the factory drive which came with the MacBook Pro when purchased new in January of this year, so I have a hard time believing the drive is physically bad, though I guess anything is possible. Another thing that has me thinking it's not the hardware is that the machine runs fine when booted to the external recovery drive and has no errors or any of the symptoms I've been experiencing.
Anyway, I've been looking at the panic reports, but I'm honestly not well versed in what any of this means, so I'm hoping one of the experts can chime in and maybe point me in the right direction as I'm running out of ideas :/
Interval Since Last Panic Report: 2467 sec
Panics Since Last Report:          1
Anonymous UUID:                    BBC20339-6AE8-82EA-4368-DCBBCC912FF4
Anonymous UUID:                    BBC20339-6AE8-82EA-4368-DCBBCC912FF4
Thu May 2 13:44:42 2013
panic(cpu 6 caller 0xffffff8025cb7e95): Kernel trap at 0xffffff7fa741c064, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x00000000443ae021, CR4: 0x00000000001606e0
RAX: 0x0000000000000001, RBX: 0xffffff81c60a6000, RCX: 0xffffff8048c44000, RDX: 0xffffff81f7773a38
RSP: 0xffffff81f7773b60, RBP: 0xffffff81f7773b60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff81c60a6000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7fa741c064, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x6
Backtrace (CPU 6), Frame : Return Address
0xffffff81f7773800 : 0xffffff8025c1d626
0xffffff81f7773870 : 0xffffff8025cb7e95
0xffffff81f7773a40 : 0xffffff8025ccd4dd
0xffffff81f7773a60 : 0xffffff7fa741c064
0xffffff81f7773b60 : 0xffffff7fa7405d64
0xffffff81f7773bb0 : 0xffffff7fa7405cba
0xffffff81f7773bd0 : 0xffffff7fa73e17ae
0xffffff81f7773c00 : 0xffffff7fa62b03a0
0xffffff81f7773c40 : 0xffffff7fa62b030f
0xffffff81f7773c60 : 0xffffff7fa62b575c
0xffffff81f7773cf0 : 0xffffff7fa62ade50
0xffffff81f7773d20 : 0xffffff7fa62feb8b
0xffffff81f7773d70 : 0xffffff8026032e7b
0xffffff81f7773dc0 : 0xffffff80260634f7
0xffffff81f7773e30 : 0xffffff8025c97fef
0xffffff81f7773e80 : 0xffffff8025c20aed
0xffffff81f7773eb0 : 0xffffff8025c10448
0xffffff81f7773f00 : 0xffffff8025c1961b
0xffffff81f7773f70 : 0xffffff8025ca5dd6
0xffffff81f7773fb0 : 0xffffff8025ccdd43
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7fa62a4000->0xffffff7fa62dbfff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa6266000
         com.apple.NVDAResman(8.1)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7fa62fb 000->0xffffff7fa6608fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa6266000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7fa62e7000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7fa62a4000
         com.apple.GeForce(8.1)[A15BB65E-3501-340F-87CB-2FD2BAD33E35]@0xffffff7fa73de000 ->0xffffff7fa74aafff
            dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7fa62 fb000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7fa62e7000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa6266000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7fa62a4000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide:     0x0000000025a00000
Kernel text base: 0xffffff8025c00000
System model name: MacBookPro9,1 (Mac-4B7AC7E43945597E)
System uptime in nanoseconds: 187720354206
last loaded kext at 185678984299: com.apple.driver.AudioAUUC          1.60 (addr 0xffffff7fa768f000, size 32768)
loaded kexts:
com.kaspersky.nke          1.0.1d41
com.kaspersky.kext.klif          3.0.0d23
com.apple.driver.AudioAUUC          1.60
com.apple.iokit.IOBluetoothSerialManager          4.1.3f3
com.apple.filesystems.autofs          3.0
com.apple.driver.AGPM          100.12.87
com.apple.driver.ApplePlatformEnabler          2.0.6d1
com.apple.driver.X86PlatformShim          1.0.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDAHardwareConfigDriver          2.3.7fc4
com.apple.driver.AppleHDA          2.3.7fc4
com.apple.GeForce          8.1.0
com.apple.iokit.IOBluetoothUSBDFU          4.1.3f3
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleMikeyDriver          2.3.7fc4
com.apple.nvidia.NVDAStartup          8.1.0
com.apple.driver.SMCMotionSensor          3.0.3d1
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.driver.AppleIntelHD4000Graphics          8.1.0
com.apple.driver.AppleIntelFramebufferCapri          8.1.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.3.0
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMuxControl          3.3.0
com.apple.driver.AppleBacklight          170.2.5
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.driver.AppleUSBTCButtons          237.1
com.apple.driver.AppleIRController          320.15
com.apple.driver.AppleUSBTCKeyEventDriver          237.1
com.apple.driver.AppleUSBTCKeyboard          237.1
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.iokit.SCSITaskUserClient          3.5.5
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleUSBHub          5.5.5
com.apple.driver.AppleSDXC          1.4.0
com.apple.iokit.AppleBCM5701Ethernet          3.6.0b1
com.apple.driver.AirPort.Brcm4331          614.20.16
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleAHCIPort          2.5.1
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleUSBXHCI          5.5.5
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.3.7fc4
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.nvidia.gk100hal          8.1.0
com.apple.NVDAResman          8.1.0
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleThunderboltEDMSink          1.1.8
com.apple.driver.AppleThunderboltEDMSource          1.1.8
com.apple.driver.AppleThunderboltDPOutAdapter          1.8.9
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.driver.AppleHDAController          2.3.7fc4
com.apple.iokit.IOHDAFamily          2.3.7fc4
com.apple.iokit.IOAcceleratorFamily          30.14
com.apple.iokit.IOSurface          86.0.4
com.apple.iokit.IOBluetoothFamily          4.1.3f3
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.IOPlatformPluginFamily          5.3.0d51
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.driver.AppleGraphicsControl          3.3.0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.7
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.iokit.IOGraphicsFamily          2.3.7
com.apple.driver.AppleThunderboltDPInAdapter          1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.6
com.apple.driver.AppleUSBMultitouch          237.3
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.driver.AppleThunderboltNHI          1.6.3
com.apple.iokit.IOThunderboltFamily          2.2.6
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IO80211Family          522.4
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IOUSBFamily          5.5.5
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.2
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
System Profile:
Model: MacBookPro9,1, BootROM MBP91.00D3.B08, 4 processors, Intel Core i7, 2.6 GHz, 16 GB, SMC 2.1f173
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0000, 0x4B4238475F44335F534F31363030434C3130
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0000, 0x4B4238475F44335F534F31363030434C3130
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: APPLE HDD TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 5
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 8
Model: MacBookPro9,1, BootROM MBP91.00D3.B08, 4 processors, Intel Core i7, 2.6 GHz, 16 GB, SMC 2.1f173
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0000, 0x4B4238475F44335F534F31363030434C3130
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0000, 0x4B4238475F44335F534F31363030434C3130
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: APPLE HDD TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 5
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 8

1. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
It can easily be disabled or overridden by the user.
A malware attacker could get control of a code-signing certificate under false pretenses, or could find some other way to bypass Apple's oversight, or the oversight could fail in a particular case due to human error.
For most purposes, applications recognized by Gatekeeper as signed, including App Store products, can be considered safe. Note, however, that at least one trojan for iOS (not for OS X) was briefly distributed by a developer in Russia through the iTunes App Store. That store is under the same oversight by Apple as the Mac App Store, so the protection shouldn't be considered absolute. App Store products may prompt for access to private data, such as your contacts. Think before granting that access. OS X security is based on user input. Never click anything reflexively.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is presumably effective against known attacks, but maybe not against unknown attacks. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. Beyond XProtect, Gatekeeper, and MRT, there’s no evidence of any benefit from other automated protection against malware. The first and best line of defense is always your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
That means, in practice, that you never use software that comes from an untrustworthy source, or that does something inherently untrustworthy. How do you know what is trustworthy?
Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
Software that purports to help you do something that's illegal or that infringes copyright, such as saving streamed audio or video for reuse without permission, is unsafe. All YouTube "downloaders" are in this category, though not all are necessarily harmful.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe.
Even signed applications should not be trusted if they do something unexpected, such as asking for permission to access your contacts or your location for no apparent reason.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Follow the above guidelines, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself from malware.
7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else.
Why shouldn't you use commercial "anti-virus" products?
Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
8. ClamXav doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
ClamXav is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
ClamXav may be able to tell you which particular virus or trojan it is, but do you care? In practice, there's seldom a reason to use ClamXav unless a network administrator requires you to run an anti-virus application.
9. The greatest harm done by security software, in my opinion, is in its effect on human behavior. It does little or nothing to protect people from emerging threats, but if they get a false sense of security from it, they may feel free to do things that expose them to higher risk. Nothing can lessen the need for safe computing practices.
10. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.

Verify Disk results, confusing.. Can they be the cause of system lock ups?

I have been experiencing strange freezes on my Mac Pro 2008 system.
My boot disk is a 50% full 128GB SSD from Crucial and is running beautifully fast however for the past couple of weeks my system often freezes for anything from 3 seconds to 30 seconds and then the Finder restarts.
After the Finder restarts everything continues running smoothly. As if nothing ever happend, no error reports, no apps crashed, nothing.
I have verified disk permissions and verified the disk itself in Disk Utility but I am not quite sure what these results mean and if they could be the cause of these random lock ups.
here are the results:
Verify permissions for “Boot Disk”
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Group differs on "private/etc/hostconfig", should be 0, group is 20.
Permissions verification complete
Verifying volume “Boot Disk”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Missing thread record (id = 5888152)
Incorrect number of thread records
Checking multi-linked files.
Checking catalog hierarchy.
Invalid volume directory count
(It should be 184294 instead of 184295)
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume Boot Disk was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
I would really appreciate it if someone that knows their way around this stuff could help me troubleshoot this.
As for the problem of the system locking up it does not happen in the same application consistently.
Often it happens in Firefox but it could equally often happen when working in Photoshop, browsing files in the Finder or trying to access the Spotlight search via the keyboard shortcut.
When the system locks up I get the spinning beach ball and I can still move the mouse and click and even still access CMD+TAB app switcher, switch spaces and all those things, just applications become non responsive.
If you need any more details please let me know.
Thanks for reading,
Jannis

These are innocuous errors that you may safely ignore. However the disk error is a problem. Do the following:
Repairing the Hard Drive
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

KT3 Ultra 2 Keyboard lock-ups

Similar Messages

Maybe you are looking for