KT3 ULTRA 2 / RADEON games dont work

as soon as i start a game the screen freezes, a few seconds afterwards, the monitor turns itself off and i have to press the reset button...
I have noticed that if i intall the newer radeon drivers this problem gets worse as it happens to almost every game. if i use the built in drivers that xp has for the radeon, it only happens about half of the games.
It also happens in 3dmark 2002. as soon as i press benchmark the monitor turns itself off and i gotta restart.
i have tried the newest 4 in 1's and it still does this
i have the latest bios
i have removed teh sb live card to make sure its not that
What is causing all this?
Kt3 Ultra 2
duron 1200
radeon 32meg ddr
sb live
256 meg samsung 2100
300W PS

Have you tried loading the default bios settings and then just changing the fsb to 133? Then check for stability? This happened to me when I upgraded to newer bios and tried running high performance settings in bios.

Similar Messages

KT4 Ultra-SR (MS-6590) dont work with AMD Barton 2500+

;( Please help me any1.
I have MBO KT4 Ultra-SR (MS-6590) with CPU AMD Barton 2500+ and i have a big problem. System corectly boot only if a select CPU FSB Clock = 100 MHz (CPU Ration/CPU Vcore/DDR Voltage=all AUTO). When a select CPU FSB Clock 133 or 166 MHz, system begin run corectly and after few second turned OFF. I selecting SDRAM Frequency on=AUTO/266/333/400 MHz but not working. My old CPU is AMD XP Palomino 2100 MHz and work fine with KT4 Ultra MBO. I upgrade BIOS with 1.4 version. I change memory module with PQI (PC 2700/256 MB) and JETRAM (PC 2700/256 MB) but is same ":censored: ". System dont work. Bad CPU Barton 2500+? I dont no. Please help me any1.
My System:
MBO KT4 Ultra-SR (MS-6590)
CPU AMD Barton 2500+ (FSB 333)
Memory DDR Samsung 2x256 MB (PC 3200) K4H56083D-TCC4
Cooler SPIRE WhisperRock IV+Artic Silver 3
HDD Seagate Baracuda 120 GB SATA
PSU Enermax 300W EG301P-VE(FMA)
VGA Saphire ATI Radeon 9100 (64 MB+TV/DVI-out)
DVD-ROM Pioneer 120S (16x speed)
CD-RW MSI CR52-A2 (52/24/52, Atapi)
FDD Teac 1.44 MB
Creative SoundBlaster Live! 5.1

Most of the time, this sort of problems arise because of power suppliy issues.. U have a enamax 300W PSU which is a VERY GOOD PSU but might just be on the line...
If u can, try swapping the PSu for a good 400 or a 420W PSU.. this might solve your enigma.. I really dont think this is your processor...
Read this two articles on PSu wrtten by one moderater which will aid in solve in fixing your problem (PSU1 , PSU2 , Troubleshooting Guide )
Best of luck
RAsika

KT3 Ultra with Radeon 9700 Pro

KT3 Ultra with Enermax 350 W Whisper Quiet Power Supply will not boot up with new Radeon 9700 Pro video card, but it works fine with Radeon 7500. :(

Quote
Originally posted by Rob454
Hi,
What are your rails on your power supply.
+12v, 3.3, and 5v.
12 v = 17 A
3.3 = 32 A
5 v = 32 A
3.3 & 5 = 185 W ?(
Rob

Game dont work =(

i got doom 3 for mac and i know its for mac coz theres like a mac sign and i already installed it on my macbook and it works. It requires you to insert disc whenever you want to play, I want to play it on my imac ive already installed it but whenever i try to play it the screen just goes black.
the disc is inside the imac someone help plz

While I can appreciate your asking for help here, you may have better luck at id Software's site, since they make Doom 3. Try [here|http://www.idsoftware.com/support/activision>.
Best of luck.

KT3 Ultra-ARU battle

Hello!
I have a Pentagram Dark 56I modem (Lucent win modem) installed on MSI KT3 Ultra-ARU. Everything is working now except my modem witch does not connect to the internet (only one out of fifty connections is successful). I haven’t got any idea what is wrong and what settings in bios are responsible for the work of internal PCI modem with MSI motherboard. The modem is 100% efficient (it worked fine during 13 months, latest driver, proper settings, checked on another computers), telephone line too. I tried all bioses 5.1, 5.3, 5.4, 5.6, all PCI slots, Windows 98, 98se, Me, 2000, XP pro, PCI latency patch, another mouse and keyboard. Now I am going to suicide ;( . Do you have any idea what else can be wrong (I disconnect every peripheries): broken motherboard, memory (1x256 DDR PC2100, checked in all slots) or my Athlon XP 1800+? ?(
Help me please!
MSI KT3 Ultra-ARU
Athlon XP 1800+ (TITAN cooler)
1x256 DDR PC2100
Leadtek Winfast 200TH
Maxtor 40GB ATA 133
Lucent Win Modem
TV card
Codegen 6016 300W PSU
LG DVD x16/48
CDRW LiteOn 48/12/48

Hi,
Disable the COM ports (If not using them) then try another modem.
Lee

MSI KT3 Ultra ARU -- After placing XP 2600+, motherboard dead

Like the thread title says, my KT3 Ultra ARU board doesn't work anymore :( (no video signal, all D-leds red).
This is what happend, I upgraded my XP 2000+ to 2600+.
Everything worked like a charm, until I removed the 2000+ CPU and changed it with the 2600+.
No video signal and all D-Leds are red.
When I changed it back to the old situation (2000+), the motherboard did the same :(
I changed hardware, but with no results whatsoever(videocard, mem etc.), And the BIOS recovery tool is (like always) not possible, because the system doesn't respond to anything and just hangs at a black screen.
The BIOS was upgraded to v5.6 (XP 2400+/2600+ Support) before the change. The cooling sits perfectly and the core of the CPUs are good (not broken or anything).
Are these signs of a dead motherboard? ;(

Quote
Originally posted by MikNT
IUpon clearing CMOS I found that I had to leave FASTCOMMAND at Normal since now I operate at 166 and it seems 166 and FAST or ULTRA do not go hand in hand. I have no idea why.
Hi! I got the same problem. With BIOS version 5.4 and 5.5 I could choose between normal, fast and ultra. Now with 5.6 it doesn't work at all (also tried with modified bios to have full raid functionality). So if you're running both FSB and memory @166mhz, you can't boot with ultra or fast (I haven't tried ultra, since fast always gives me the best perfomance).
Ah! And I can choose ultra or fast with FSB @ 133 and Mem @ 166.

Big problem with KT3 Ultra (ms-6380e v1.0) after flashing the BIOS (de

Hello out there.
I have a real complicated matter with my Kt3 Ultra board.
Used to work fine, but after I flashed it with the latest BIOS (5.7), the board has this strange behaviour: when I clear the CMOS, the board boots up, when I change & save the settings, the board does not "come to life"(black screen & beeper silent).
It has also this weird problem: it shows garbage charaters on the voltage setting of the CPU. Instead of voltages (i.e. 1.750 etc. etc.) I have only "scrambled" strings.
I had MANY difficulties in upgrading the BIOS because the AMI-flashing utility kept telling me "bios protection enabled) (but there was NO bios-protect setting in the previous bios - I checked a zillion times)...but after trying with different revisions finally I made it.
I already tried everything (re-flashed older bios-es etc. etc.)and I'm starting to feel beat ... if you have any advice, please le me know.
It would be really SAD to put this great board in the garbage-dump....
Bye,
Wyk'03

im having problems with this board as well,
i had no problems with the flash,
i did this...
boot to win me floppy,
copy the flash files to ramdrive, flashed to latest bios..
now windows hangs when i have my ac97 audio enabled in bios...
I WANT MY AC97!
hmmm can you get to a dos prompt from a boot disk?
try re-flashing with 1.0 again and then disable the cmos virus protection thingy, and yes it was there it was in the 1.0 bios on the main screen.

Problems with kt3 ultra + radeon 9800pro

hey guys,
heres my story (bare with me)
i bought a radeon 9700 pro around christmas time, recieved it, (almost) everything worked fine on it, etc etc. however in games, it would give me this weird flickering poly thing going on (screenshot included) after seeing this, i stuck an extra fan in my case, thinking it was a heating issue. no worky. after that i just assumed the heatsink/fan wasnt securely on the chip. whatever.
anyway, i returned the vid card, got my money back and just decided to sit on the extra money for another couple of months and let prices drop a bit.
soooo i order myself a radeon 9800 pro this week. i get it today, and im getting the EXACT SAME PROBLEM. so obviously it wasnt a heat issue, it was.. something else.
this is where you come in anyone have ANY ideas why i would be having this problem? im attaching a screenshot i snagged of what the error looks like (if that will help at all)
i have already tried running driver cleaners, blah blah blah. i even reformatted and reinstalled windows on the drive, and im STILL having the same problem. not to mention i get occasional lockups and bluescreens.
ive tried flashing bios, updating mobo drivers nothing fixes it.
is this just some quirky incompatability between the mobo and the vid card or what? (i had a gf3ti200 in here before the 9800pro.. never had any problems)
so can anyone help or am i just going to have to buy a new motherboard?
msi kt3 ultra
512 pc2700 ram
80 gig wd
ati radeon 9800 pro

"DOS'ish" ?
start with flashing the latest mobo bios before you start if you haven't allready. I recommend stick with the 3.7 Cat driver (many people are reporting worse problems with the later rev Cat drivers) and follow these directions:
1) download and install the latest via driver (i know, you have it)
2) download and install latest soundblaster driver (if you are using a soundblaster audio card of course)
3) download and install catalyst 3.7 driver/control panel/samartgart from ati.
4) disable fast-write in bios (this was causing corrupted icons and cursor in windoze).
5) go to c:\programs\ati technology\ati control panel and execute smartgart (it's a link)
6) enable - pci read/write and agp read (probably allready is enabled).
7) disable - agp write (default in my case was on causing lots of stability problems in games).
"apply", reboot, then "ok".
above solved all my probs w/9600 pro and msi kt3 ultra-aru
good luck!

KT3 Ultra-ARU not work with ATI 9600pro?

Hi,
I have recently(yesterday) bought an ATI 9600pro, to upgrade my old GF2pro. As the title says, I have the KT3 Ultra-ARU(MS-6380E)
There seems to be lockup problems that involve only certian games and the ATI DVD player. In all instances the lock ups happen when the mouse is moved. With respect to the ATI DVD player, it will lock if the mouse is moved over the video window.
I have tried a few things but nothing works, so I am posting here to try and see if someone knows something and I will contact ATI in a few hours, or maybe tomorrow.

For via chipset (kt333 based msi kt3 ultra-aru) i can now obtain full hardware acceleration and 100% stable for c&c generals game by:
1) download and install latest catalyst 3.7 driver/control panel/samartgart from ati.
2) disable fast-write in bios..
3) go to c:programsati technologyati control panel and execute smartgart
4) enable - pci read/write and agp read.
5) disable - agp write (default in my case was on causing the problem).
6) "apply", reboot, then "ok".

Cannot get sound to work kt3 ultra 2c

Hello- I reformatted and installed windows 98 on a friends comp with an ultra 2c ms 6593-it has ac97 sound. I installed the latest vid drivers for his card and dx9..and then i tried to install the sound drivers from the cd and for some reason the cd doesn't go through an auto set up. i can't even install the sound drivers manually. I went into the bios and it said ac97 was enabled.But there is nothing in windows that shows any sound.the computers sound worked before he crashed it and i reinstalled..i was running out of time so i couldnt look into it further.. is it possible that installing dx9 before the sound drivers could have screwed something up?.. or was something in the bios changed that i am not aware of. He crashed the comp when he tried to put in a modem that might not have been compatable..and i may have changed something when I went into the bios to try and get into safe mode to retrieve some files..
ac97 says 'enabled' in bios but i can't remember if it was highlighted-(changeable)
anyway- im not that experienced in this stuff..any help would be appreciated. Thank you.
THARN
this system also hangs on startup-doesnt get past 3 grn lights on the back bracket- it starts though if reset is pushed..that doesnt seem good to me.
the system specs as far as i know are:
msi kt3 ultra 2c(via 333) athlon 1800
win98/265 mb ac97 onboard sound
nvidiage2-64mb card

Thanks-Hansh
I'm thinking the same thing but the problem is-it's not my computer and my friend said he doesnt want me to re format and redo everything-but there may be no other choice..deep down i think it has everything to do with installing directx9 before the sound drivers...(my mistake -doh)..im going over there today to try everything short of reformat.. ive been reading this entire site and appreciate evryones input from past posts...helps mediocre' compgeeks like me.
THARN
btw- win 98 was installed- heres the story. win 98 was installed- sound was working vid was working. I transplanted his old modem from his other comp and the connection was slow-was an old v90 and probably not in good shape anyway. so we ordered a new modem and it had an intel chip-(when the drivers were installed-fatal exception to the 100th degree..)so i reformatted and reinstalled everything for him.got a new modem that said amd copatible-everything works except sound..prolly because of the order i put in drivers..gonna see soon enough.

Ive tried to make a purchase with my other apple id but i keep getting prompted to purchase this app again....i want to continue in the game im working on but i dont want to wait the 30 days until i can use my new prepaid credit card(mastercard)....both i

Ive tried to make a purchase with my other apple id but i keep getting prompted to purchase this app again....i want to continue in the game im working on but i dont want to wait the 30 days until i can use my new prepaid credit card(mastercard)....both ids are linked to my facebook does that help?

Ive tried to make a purchase with my other apple id but i keep getting prompted to purchase this app again....i want to continue in the game im working on but i dont want to wait the 30 days until i can use my new prepaid credit card(mastercard)....both ids are linked to my facebook does that help?

Arrow keys dont work on flash games

Hi, anyone had this problem? The arrow keys dont work when I
play flash games. Have downloaded latest version of flash (multiple
times) and still the same problem. I load up a flash game, then can
only use the mouse to play. Arrow keys just dont respond when used.
Arrow keys work fine on other programs, just flash is a
problem
Really hope someone has had this before and knows what to do.
Thanks for any replies.

I had the same problem and was looking around on the net for
help. I found a post that said to try using the numbered keypad
instead, as in 8 is up, 2 is down, 4 is left and 6 is right. It
worked for me so hopefully this will help you as well. :)

Flash games, (perfect poker, bubble island etc) dont work on facebook after Firefox 4 install?

Flash games, (ie perfect poker, bubble island etc) on facebook dont work after Firfox 4 install. i have all latest updates to adobe etc.

I would like to remove facebook, whatsapp, coming soon, mcafee, uefa, wisepilot, news republic and that xperia power management tool.
Those 8 app are not useful and waste my space on the phone. I tried to uninstall them, everytime i restart the phone they install again and again, it's a pain!!
The wifi bug is not solved, the led notification is not solved, the light sensor is not solved and we have now no HD video.
What the hell are you doing there??????????????????????????????????????????
Last minute update: After a lot of tries and restart finally it doesn't install anymore mcafee, uefa (I had 2 uefa application automatically installed!!), wisepilot, news republic, comingsoon.
I still can't get rid of that damn bloatware facebook (Facebook app, Calendar sync per facebook, Facebook extension, FBiX Music Likes,FBiX Post Viewer, FBiX Proxy, FBiX Setup, Friends Games and Applications, Friend Music and Videos) and Whatsapp (I dont use it and it waste 4MB). To jo_xperia: how did you uninstall facebook?

Will the Audigy 2 Platinum work on the KT3 Ultra

I recently bought the Sound Blaster Audigy 2 Platinum, and I have been having problems with it. After I installed it, I could never get the sound card to be recognized. I moved the sound card to different PCI slots, and I uninstalled and reinstalled several times, yet still no success. I was wondering if it was because the Motherboard I have doesn't support it or whether I just got a defective product. I have the MSI KT3 Ultra MS-6380E (VIA Apollo KT333 and VT8233A Chipset Based) Motherboard. Could I please get some help?

I have KT3 Ultra, and Audigy 2 (non platnium, but its the same card), and it works fine. Try upgrading your bios maybe?

I purchase full version of this game (triple star 2000-developer Antonio Lattanzio) but dont work full.What happent,i paid the app??PLS help

i purchase full version of this game (triple star 2000-developer Antonio Lattanzio) but dont work full.What happent,i paid the app??PLS help

Hi Tatae55,
I think that your purchase failed for some connectivity reason but it will be restored as soon as you try to 'Restore' the purchase or 'Re-Buy' the Non-consumable product.
Don't worry, you will not be charged again if your purchase was successfull before.
Kind Regards,
Antonio Lattanzio.

KT3 ULTRA 2 / RADEON games dont work

Similar Messages

Maybe you are looking for