KT3-Ultra 5.7 BIOS.....

Hi,
The KT3-Ultra (-ARU) 5.7 BIOS will be released official this week...
Don't expect much changes over the last BIOS as there are very little.
As these are the only improvements:
Fixed AMD 2600+(266MHz FSB) CPU shown incorrectly
Fixed ATi8500 AGP card cannot be used

Quote
Originally posted by Bas
Hi,
That there isn't official support doesn't mean it won't work on the board....
As I heard from several people that the TBred-333 CPU's do work, even when they are not supported....
We have to wait until somebody tries it :D
Hi,
I know, it's only a bios trouble, infact on the MoBo page (at CPU support section) are tested processors till +2800/333mhz without problems, and my T-Bred goes easy at 166mhz. Barton have only 256k plus L2 than T-Bred...but why MSI dosen't make a bios with the official support to 333mhz? The KT3Ultra2 was reported officially (in old news from MSI) with 333mhz support. I'm very disappointed about this... :(

Similar Messages

Max hard drive size on a KT3 Ultra ?? bios is 5/24/02

MSI MS-6300-Series MS-6380E (KT3 Ultra-ARU)
I have a Maxtor 40gb ata 100 hd,and want to grab a bigger drive.I am running Win 2K
If I do need to flash.
What bios do I need to flash to,and what is the max size hard drive I can use with this ancient motherboard ? thanks in advance.
Also have a 32x cd rom LG
and 2 128mb sticks of ddr
Athlon XP 1800
EDIT: NM all,I found it can up to at least 250Gb hard drives on ATA133

MSI MS-6300-Series MS-6380E (KT3 Ultra-ARU)
I have a Maxtor 40gb ata 100 hd,and want to grab a bigger drive.I am running Win 2K
If I do need to flash.
What bios do I need to flash to,and what is the max size hard drive I can use with this ancient motherboard ? thanks in advance.
Also have a 32x cd rom LG
and 2 128mb sticks of ddr
Athlon XP 1800
EDIT: NM all,I found it can up to at least 250Gb hard drives on ATA133

KT3 Ultra + v5.7 BIOS -- weird behaviour

I have KT3 Ultra with newly flashed 5.7 BIOS + XP2100, 512 333DDR, Club3D 9700np, WindowsXP.
I had some start-up troubles after installing 9700np (8 beeps and no signal), which forced me to reset the system every time after power up to load windowsXP. So, I decided to flash the BIOS. Now, system boots up with no problems, but I've encountered a new problem.
Pressing ctrl+alt+del doesn't bring up the TASK MANAGER. All I get is the CPU USAGE window. Thus, processes, applications etc., those are gone. This means, basically, that I can't shut down programs that are not responding (not that I need to do that very often, but still...). Right clicking on the task bar and selecting TM shows me the same CPU USAGE window.
In addition, IE's pop-up windows that launch external programs (like some sites offering mp3 ring tones that I play with Winamp) cause IE to crash. Never happened before.
All this happened right after I flashed the BIOS. Any ideas?!?! Should I go back to 5.5 that I had before?
Thanks,
Thomas

This is pobubly off topic, but since the title is KT3 Ultra and Bios 5.7 I decided to ask here so as not to create a duplicate thread.
I to flashed my Bios to 5.7, but my problem is as follows.
After flash rebooted my computer as instructed, entered bios and verified all my configurations. Rebooted again. Windows came up fine but all text was garbled and unreadable. Reflashed 5.7 (thinking it didn't take). Again same problems. Had to flash back to 5.6 inorder to straighten out.
Bas any ideas?
Thomstucks:: Sorry to hear about your problem, and for jumping in on your thread. Have you tried 5.6?

KT3 Ultra 2 funny bios

I have a strange situation here. I have been running a XP1700+ palamino unlocked at 9.5x190 (1810) (max ram timings) with the original bios which was v5.5. I decided to pick up 2400+ so before installing it I flashed the bios to v5.6 which is supposed to support it. It does. Tried overclocking a little with it locked got to 2325@155fsb. Over that unstable.
So I decided to unlock the 2400+. Put back in and it was unlocked, so start going up. 12.5 x160 fsb keeping it around 2000mhz. Totally unstable.Drop fsb to155 and its stable. Try to use the 15 multiplier (stock speed) Boots at 933(7x). Try 14 mult. @666(5x) useless multipliers. Now it seems I'm being limited by the fsb, strange because 1700 would run @190fsb( everything the same except CPU and Bios).
I figured I must have got a bad Cpu.So I pull it out to see if something else may have gone bad, and put 1700 back in. Suprise!! max stable fsb 155. .
After Trying slow timings in bios and everything ,still no go. SO I flashed back to bios v5.5. Reboot we're up to 173fsb .Ran tests over and over.Stable.. Better but what happened to 190!!!
So now I put the 2400 back in unlocked and works fine up to 173fsb BUT I still have a max mult of 12.5 and max fsb 173 .
Is the bios these boards ship with different than the ones they have posted on their site?
If anyone has any info, it would be appreciated.
Phil
System
KT3 Ultra 2
Xp2400+
1 X 512 winbond
Ati Radeon 8500
Live! Value
Intel 10/100 pro
Plex 16/10/40
Lite On 163
cmd raid controller
2xWD400bb
1XWD800bb
Vapochill
Vantec Stealth 420w PSU
Logitech Z-560

Thanks for the reply Maesus
I have been clearing CMOS each time. I understand that It would seem to be hardware but not sure why I can once again go higher when I flash back to older bios (not as high as original but higher than v5.6) Also with the 1700 the bios was the only change.
The other thing with the multipliers of 14 and 15 not giving the correct result also bothers me. I know it can do a 15x because it does with cpu locked but when unlocked no go. Is this a limit of the KT333 the KT3 Ultra 2 or a bug in the Bios.
One last thing there is an option 12.5/13 but as far as I can tell choosing it only give 12.5 .Is there some way to get 13x ?
Phil

KT3 Ultra USB D-Bracket problem

This is the problem: I connected the D-bracket to my KT3 Ultra board. But it doesn't work. Al least, none of the devices I connected to it (printer and camera) are found or seen by Windows. Windows does see a removable device but not the camera. Also the software I use for the camera can't find it. The bracket did work on a older board with Windows ME. But now it doesn't.
Do I oversee something?
Board: MSI KT3 Ultra (with latest BIOS revision)
OS: Windows XP home (with all the updates)

This is interesting. I have the same board, also running WinXP Professional with SP1 on it.
As long as I don't use a Bios later than Ver. 5.4 the USB ports work fine and connected devices are recognized and installed correctly.
However, installing any newer BIOS (5.5 - 5.7) will make the USB ports unusable. The (embedded) USB root ports stay installed or get automaticall re-installed when I remove them, but no device will be recognized and installed correctly any more. They will only be recognized as "unknown device" and that was it. When going back to BIOS 5.4, everything is ok again.
Since BIOS 5.6 is required to operate 2600+ processors this is extremely bad.
I would recommend that you try with an older BIOS (e.g. 5.4) and let me know whether you get the same results.
Heh...
I'v just gone through hell strugling with the USB on my KT3 Ultra under WinXP, untill I got here... fortunaltely. After I flashed my Amibios to 5.7 or something all USB went dead and I couldn't believe that updating something makes it worse... but guess thats the case. Well I'm happy they keep the older versions available but still these (known) bugs should be on somekind of messageboard so you woundn't have to search all places wrecking your nerve along on the process. In addition I'm not a big fan of flashing bios every now and then.. don't think u are either. I think This forum really helps people ....!!

KT3 Ultra will not shut down

KT3 Ultra will not shut down .The wake on in bios is disabled.
Is there a test to run? Im 2 weeks with XP PRO .
Thank yaw
Willettfx
AMD 1700
MSI KT3 Ultra MS-6380
BIOS Version 5.00
381mb
DVD
10/100 network card
maxtor 40 7200
G4 460 MX VTP
XP PRO
17 KDS
http://members.tripod.com/garywillettmonsters/id29.htm

http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=11%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6380E
update your bios first

MSI KT3 Ultra ARU 5.7 BIOS and SoudBlaster Cards - Audigy

I have flashed my BIOS to 5.7 Version and my sound card start to make a lot of noise (crackling) when play AC3 or DVD. If you dont want to use the new AMD CPU 333 FSB you dont need to flash the BIOS - I have Flashed to 5.6 again but, if you want to use a 333 FSB CPU you can flash the BIOS to version 5.7 and if have sound problems use the PCI latency patch for VIA chipsets.
VIA chipset MotherBoard owners who have through all of the above and still have sound problems with their Soundblaster cards, might want to look into the PCI latency patch for VIA chipsets - get it here:
http://www.georgebreese.com/net/software/
(scroll down the page there just a little to get to it).
There's also a similar page about resolving sound problems on Via chipset based computers here:
http://www.deinmeister.de/mvp3_zlt_e.htm
I hope this post help somebody
Mário Silva from Beja - Portugal
My System:
MSI KT3 Ultra ARU
Athlon 2400+
512 Kingston PC2700 DDR SDRAM
MSI Geforce4 Ti 4200
SoundBlaster Audigy
Windows xp Pro SP1
400W PSU
Creative Drx3
Pinnacle PCTV pro
HDD Maxtor 80 GB UDMA 133
DVD Pioneer slot in
RW Samsung 48x16x48
Creative WebCam Go
UPS 500 VA
Monitor Sony 19" E400E

Since my chip is an unlocked, I cannot easily run it at the default, but I can underclock it. At 100x6.0=600mhz, USB does not work, as well as 100x12.5. Same with 133x6.0 and 133x12.5. It appears to make no difference underclocking or overclocking.
I downloaded the right BIOS listed on MSI's KT3 Ultra-ARU page. I don't think the BIOSes are different anyway, since the same files, changelog, and etc are also listed for the Ultra-2 board.
A thing to note, that this is the onboard VIA-controller USB ports doing this. My Ultra-ARU's NEC-controller USB 2.0 ports work fine in both Win2k and Linux if I hook my mouse and keyboard up in those. This is not an ideal solution for me though.

KT3 Ultra (2) Bios version 5.7 released

MSI has now released bios version 5.7 for the KT3 Ultra (ARU) and KT3 Ultra2. Fixes posted are:-
Support AMD Barton XP3000+ (FSB333) CPU (For KT3 Ultra2 only)
Add CPU Halt Command Detection in the Bios Setup
Fixed ATI 8500 AGP Card cannot be used
The new bios can be downloaded here:-
KT3 Ultra (ARU)
Link
KT3 Ultra2
Link

Juras. This thread may help answer your question Link

KT3 Ultra MS-6380E whit bios 5.0

My KT3 Ultra MS-6380E whit bios 5.0 don't recognize fsb of athlon xp 1800+ .
Mainboard set fsb at 100Mhz if i set manually at 133 the system don't boot.
I go at bios update in msi site and ALL bios tool for upgrade are a AMI BIOS

I am running a XP 1900+, I wouldn't run with my old 250W PSU, bought an ALLIED ATX 350W, and runs like a charm. Only $30. Easy Fix

KT3 ULTRA-2 BIOS 5.5 OR 5.6 ?HI

Hi. I have a kt3 ultra-2 that had a 2000+ cpu.
I upgraded the cpu to a 2600+ that runs at 333. So i set the fsb to 166. It works just fine. my question is.
My bios is 5.5 and 5.6 says it supports the 2600+.
Do i need the 5.6 bios? Is ther new settings in it for a 2600+. And does live update 2 really work right with ntfs and xp. thank you for the help )

Hi,
No, you can stay with 5.5 if you like....
5.6 won't add settings, if 5.5 is running fine, leave it alone..
Yes, LiveUpdate works with XP and NTFS.

KT3 Ultra 2 - Bios V5.7 - Problem

Hello,
I don't know if anyone else has tried updating the KT3 Ultra 2 to the new V5.7 BIOS ?
I tried and got load of error messages on the screen, Chipset isn't support etc ROM Size Unknown ....
I have V5.6 on right now.
I have tried Live Update, it doesn't show new bios and also tried another floppy with files on and also downloaded the file again.
No win !

I did not have that particular problem but I found others
I was able to load new 5.7 bios but after I did it took board about 2 minutes to boot.
The part where the XP logo screen is supposed to come up took about 2 minutes. There is no HD (light) activity and then all of a sudden you hear harddrive and XP logo screen comes up and it boots fine.
The same situation arose with Bios 5.6 but I was able to fix that by changing MPS table from Default 1.4 to 1.1. The XP screen would take about 2 minutes to boot so I tried changing settings in bios and finally came to the MPS entry and changed it to 1.1 and the board booted fine. It took about 3-5 sec for the XP logo scrreen to pop up after the last bios screen that would show all the Devices, IRQ's ect...
Changing the MPS to 1.1 in the 5.7 bios did not fix the long boot problem like it did in 5.6.
I can live with the 5.6 bios but the CPU halt command in the 5.7 bios drops temps about 20 degrees F and that is great. I hope this problem can be fixed in 5.7 so I can utilize the CPU Halt command.
My Second Rig: Backup
AMD Athlon XP 2200 (266 fsb)
MSI KT3 Ultra 2
XP Professional SP-1
512mb Crucial PC2700
3 Western Digital HD (2) 80Gb and (1) 20Gb
Enermax EG365AX-VE powersupply
Hercules Gforce 2 GTS/Pro 64mb
Waveterminal 192L sound card
Promise Ultra 133 TX2 card
Intel Pro/1000 MT desktop adapter
Plextor 24x10x32 CDRW
Toshiba DVD
Coolermaster ATC-201 Case
CoolerMaster HHC-001 Heatpipe HS

Big problem with KT3 Ultra (ms-6380e v1.0) after flashing the BIOS (de

Hello out there.
I have a real complicated matter with my Kt3 Ultra board.
Used to work fine, but after I flashed it with the latest BIOS (5.7), the board has this strange behaviour: when I clear the CMOS, the board boots up, when I change & save the settings, the board does not "come to life"(black screen & beeper silent).
It has also this weird problem: it shows garbage charaters on the voltage setting of the CPU. Instead of voltages (i.e. 1.750 etc. etc.) I have only "scrambled" strings.
I had MANY difficulties in upgrading the BIOS because the AMI-flashing utility kept telling me "bios protection enabled) (but there was NO bios-protect setting in the previous bios - I checked a zillion times)...but after trying with different revisions finally I made it.
I already tried everything (re-flashed older bios-es etc. etc.)and I'm starting to feel beat ... if you have any advice, please le me know.
It would be really SAD to put this great board in the garbage-dump....
Bye,
Wyk'03

im having problems with this board as well,
i had no problems with the flash,
i did this...
boot to win me floppy,
copy the flash files to ramdrive, flashed to latest bios..
now windows hangs when i have my ac97 audio enabled in bios...
I WANT MY AC97!
hmmm can you get to a dos prompt from a boot disk?
try re-flashing with 1.0 again and then disable the cmos virus protection thingy, and yes it was there it was in the 1.0 bios on the main screen.

KT3 Ultra BIOS problem + question

Hi
after switchin on the CPU Halt command detection. My PC beeps 3 times after shutting down. D-LED says memory problem. When I turn off the PSU and after a while turn it on, everything is OK and PC boots normally. Does anyone know the reason of the beeping??
Question: has somebody tried (somebody very rich to afford buying Barton) Barton (or T-Bred FSB333) processor on KT3 Ultra??
thx a lot )

Hi,
Switching on CPU HALT Command will make your system unstable. That's the message of the beeps.
You should be able to improve this by using a better PSU. Otherwise, there is no reason of using CPU HALT command as there are many software CPU Coolers you can get.

MSI KT3 Ultra-ARU video lock-ups

Hello,
I have a 3 month old MSI KT3 Ultra-ARU. I am running Windows XP Professional and I am having a periodic lock-up where the screen will show blinking colored blocks and the system will freeze. Sometimes just hitting reset will cure the problem. Other times, hitting reset will create two vertical stripes of colored blocks scrolling down the screen. I have used the board on two entirely separate systems (One with AMD Athlon 2000+, Gainward GeForce 4200, 512 MB Samsung 2700 DDR, Western Digital Expert HD (tried both IDE #1 and RAID controller) (Other System, Athlon 1800+, a different Gainward Geforce 4200, 256 Crucial 2700 DDR, an older Maxtor hard drive). In either system, every once in a while, the system will freeze as described above (it has happened in Netscape 7.0, Microsoft Word 2000, America's Army game).
I have played around with the bios settings, reformatted hard drives, tried various revisions of the nvidia display drivers, swapped out video cards, etc. Any ideas? Do I have a bad board? Do I need to flash the BIOS? If the board is bad, what do I need to do to return it?
Thanks,
Matt Gumaer

The second system has a 330 watt enermax power supply. With the new system I put together, I put virtually the same board (MSI KT3 Ultra 2 with bluetooth and RAID), everything is the same as my first system (except the KT3 Ultra-ARU) and the stability is fine. So, I'm reasonably confident its not the power supply.

Kt3 ultra and 9600xt fast write

Amd Barton 2500
dr. thermal ti-77n
Kt3 Ultra standard mobo w/5.7bios
Antec performance II sx835II case w/350 psu
Corsair 512 2100 x3
Ati 9600xt
Audigy ZS gamer
as some of u may be aware the 9600 family of cards are very picky about fast writes. In order to run games without lock ups/crashes i must enable fast writes. The problem is that when i do, i get corrupt text, lines around my cursors, video lag etc etc. I recently switch to a barton 2500 that is running a 1.87ghz at 133fsb, before i ran an 1800 that did not have any of these problems with fast write enabled. bios and xp recognixed it as a 2500+ and i have the ratio set to auto and memory set to HCLK. I tried varios drivers for the gfx card and all produced the same results. Also tried all combinations of bios fast write on gfx control panel off, on etc. any ideas?
TIA
-leo
pic of lines/box around cursor

fast write disabled = game willl lock, the 9600 family of cards are notorious for this, i was able to fix my corrupt text and cursor problem by moving the slider under troubleshooting in the ati panel down a notch. in game im still seeing some problems though, hopefully the game specific forums can give me some help. thiis is really annoying because the dam game ran fine with my 1800 i went to the 5.09 drivers on the reccomendation from another forumite.
screeny to show in game problem for those that care
www.theoldschoolers.com/Forums/uploads/post-11-1134154170.jpg
anyways this is more specific game related matter now, but i figured id post up a follow up for u guys anyways

KT3-Ultra 5.7 BIOS.....

Similar Messages

Maybe you are looking for