Kt3 ultra and 9600xt fast write

Amd Barton 2500
dr. thermal ti-77n
Kt3 Ultra standard mobo w/5.7bios
Antec performance II sx835II case w/350 psu
Corsair 512 2100 x3
Ati 9600xt
Audigy ZS gamer
as some of u may be aware the 9600 family of cards are very picky about fast writes. In order to run games without lock ups/crashes i must enable fast writes. The problem is that when i do, i get corrupt text, lines around my cursors, video lag etc etc. I recently switch to a barton 2500 that is running a 1.87ghz at 133fsb, before i ran an 1800 that did not have any of these problems with fast write enabled. bios and xp recognixed it as a 2500+ and i have the ratio set to auto and memory set to HCLK. I tried varios drivers for the gfx card and all produced the same results. Also tried all combinations of bios fast write on gfx control panel off, on etc. any ideas?
TIA
-leo
pic of lines/box around cursor

fast write disabled = game willl lock, the 9600 family of cards are notorious for this, i was able to fix my corrupt text and cursor problem by moving the slider under troubleshooting in the ati panel down a notch. in game im still seeing some problems though, hopefully the game specific forums can give me some help. thiis is really annoying because the dam game ran fine with my 1800 i went to the 5.09 drivers on the reccomendation from another forumite.
screeny to show in game problem for those that care
www.theoldschoolers.com/Forums/uploads/post-11-1134154170.jpg
anyways this is more specific game related matter now, but i figured id post up a follow up for u guys anyways

Similar Messages

Random resets with a kt3 ultra and a MSI GF3 ti200 in 3d games

Im having random resets with a kt3 ultra and a MSI GF3 ti200 in 3d games; namely Mafia and Bf1942. Ive tried new drivers for the video card, checked the cpu temp, and bios settings. Any ideas on how to fix it or is their a compatibility problem with the mobo and the video card?

I found my 6380 v2.0 mobo liked 1 brand of ram more than other.I only run crucial,kingston or muskin(micron chips)ram.Put all bios settings to defaults & try only 1 stick(1 brand) of ram at a time.I also found my gf3 ti 200 & 500 liked certain versions of drivers over others.It would crash on some.Try original cd install drivers that came w/ vid :D card.Try running 3d mark 2k1 bencmarks to test all drivers & ram.

KT3 ULTRA and memory

?( I have KT3 Ultra with 512meg 2x 256 in Sockets 1 and 2.
XP home and Athlon XP1800 I am trying to increase the RAM with another 256 in socket 3.
When there is a module in the 3rd socket the machine will crash. I have tried 3 different memory modules and even taken out the existing memory and swapped modules around but it will still crash. Sometimes it takes a couple of hours to crash and others it will happen on powering up. Today this is what the blue screen message said .
Problem with WIN32K.sys page fault in non paged area
It will crash during any software it doesnt seem fussy
Word, Photoshop IE6 whatever
Anybody have any ideas or advice where to go ?
TIA

are all 3 tottally identical maker revision etc
mixed never seem to work
try less agressive ram timmings
some times 3 just will not work is what ive seen
more ram draws more power is a possible reason

MS-6380 and AGP Fast Writes?

Greeting All! :D
I have a K7T266 Pro (MS-6380) mobo and recently bought a Radeon 9700. After a clean install of WindowsXP and installing the newest drivers for everything I have a machine that runs stable, but I'm not getting quite the performance I was expecting. After a bit af tweaking I was able to get my framerates and 3DMark scores respectable, but I can't enable AGP Fast Write. Trying to enable AGP FW causes a complete system meltdown. My question is, does this motherboard support AGP FW and if so, does anyone with this mobo use it and how much does it increase performance?
Thanks,
Robb

I do use that MB w/ AGP FW enabled and my system remains stable under 98SE and Xp pro, however I'm only using a Ti200 nvidia based card. So drivers may be the problem as ATi is famous for their driver issues, keep in mind that card is fairly new and it usaully take ATi awhile to get everything together.

MSI KT3 Ultra Reviews (NOT ARU)

I can't find any MSI KT3 Ultra Reviews on the web
Does anyone know where I can find MSI KT3 Ultra Reviews?
(I don't want the MSI KT3 Ultra ARU reviews)

bas is correct. an ARU and non ARu are going to function the same and perfrom pretty much the same
Im just posting in addition to what Bas said since I have both the KT3 Ultra and KT3 Ultra ARU and I can tell you from personal experience they perform identically
=======================================
The only rant I have about the ARU is the ARU has that ugly uneeded and crappy fan on the northbrdige....LOL I really like the non ARU without the fan better. The orange heatsink on the nonARU is more than enough to cool the NB even when overclocking. The KT333CE chip is well designed and doesnt get that hot by its very nature. So that darn cheapy fan is just for looks and serves no functional purpose on this chipset.
And best of all with the non ARU - the orange heatsink makes no noise and has no moving parts to break down
( :D ok done with my rant. Seems everyday I have to tell how I hate that silly silver fan lol :D )

RAM or MOBO error? KT3-Ultra

I have just gotten the Kt3-Ultra and have
when first turning it on, been greeted with a 3 beep from the speaker.
The D-Bracket LED's show that the error is a "Onbord memory module may be damaged or not installed correctly"
The system then hangs.
What does this mean?
Is the RAM stuffed (DDR-PC2700)
or is it the MOBO.
PLEASE HELP ME!!!! X(

Quote
Originally posted by Cmdr_K00n
I have just gotten the Kt3-Ultra and have
when first turning it on, been greeted with a 3 beep from the speaker.
The D-Bracket LED's show that the error is a "Onbord memory module may be damaged or not installed correctly"
The system then hangs.
What does this mean?
Is the RAM stuffed (DDR-PC2700)
or is it the MOBO.
PLEASE HELP ME!!!! X(
I have the same problem, w/ same MOBO. I have found that if I disconnect the power cord or turn off power strip after turning off computer, the problem is gone temporarily. It comes back again when I turn off the computer again. Could there be a BIOS problem, or possibly something to do with the MOBO not resetting correctly?? Please help!!!

Will the Audigy 2 Platinum work on the KT3 Ultra

I recently bought the Sound Blaster Audigy 2 Platinum, and I have been having problems with it. After I installed it, I could never get the sound card to be recognized. I moved the sound card to different PCI slots, and I uninstalled and reinstalled several times, yet still no success. I was wondering if it was because the Motherboard I have doesn't support it or whether I just got a defective product. I have the MSI KT3 Ultra MS-6380E (VIA Apollo KT333 and VT8233A Chipset Based) Motherboard. Could I please get some help?

I have KT3 Ultra, and Audigy 2 (non platnium, but its the same card), and it works fine. Try upgrading your bios maybe?

How do I upgrade my drivers to get the best from my 9800Pro (fast writes?)

Hi - my first post so take it easy
Was told that this was the place to ask regards my PC
Its a Medion PC which has a Micro-Star MS-6701 Motherboard - as I understand it this board is an OEM one which MSI has made for the Medion Company
I wish to upgarde the drivers for the motherboard so that I cabn get the best from it and enable Fast Writes if possible
The reason for this is that even though I have a Radeon 9800Pro - 512MB of Ram and a P4 2.6GHz PC I am only getting a 3D mark of about 4800
Can anyone help me please ?
Details of board
Manufacturer MICRO-STAR INTERNATIONAL CO., LTD
Model MS-6701
Version
BIOS Vendor Phoenix Technologies, LTD
BIOS Version AWARD - 42302e31
BIOS Release Date 22/02/03
BIOS Properties Plug and Play, Flash, AGP
AGP
Revision 3.0
Rate 4x, 8x (8x enabled)
Available Rate 0x0000000c
Selected Rate 0x00000008
Aperture Size 128 MB
Sideband Addressing supported (enabled)
Fast Write not supported

These are details of my PC
Quote
Processor
Model : 1x Intel(R) Pentium(R) 4 CPU 2.66GHz
Speed : 2.67GHz
Performance Rating : PR2940 (estimated)
Type : Standard
L2 On-board Cache : 512kB ECC Synchronous ATC (8-way sectored, 64 byte line size)
Mainboard
Bus(es) : ISA AGP PCI USB FireWire/1394
MP Support : 2 CPU(s)
MP APIC : No
System BIOS : Phoenix Technologies, LTD 6.00 PG
System : MEDIONPC
Mainboard : MICRO-STAR INTERNATIONAL CO., LTD MS-6701
Total Memory : 511MB DDR-SDRAM
Chipset 1
Model : Silicon Integrated Systems (SiS) SiS648 CPU to PCI Bridge
Front Side Bus Speed : 4x 134MHz (536MHz data rate)
Total Memory : 512MB DDR-SDRAM
Memory Bus Speed : 2x 167MHz (334MHz data rate)
Video System
Monitor/Panel : Plug and Play Monitor
Adapter : RADEON 9800 PRO (Omega 2.5.22)
Adapter : RADEON 9800 PRO - Secondary (Omega 2.5.22)
Physical Storage Devices
Removable Drive : Floppy disk drive
Hard Disk : ST3120023A (111.8GB)
Hard Disk : Medion Flash XL MMC/SD USB Device
Hard Disk : Medion Flash XL CF USB Device
Hard Disk : Medion Flash XL MS USB Device
Hard Disk : Medion Flash XL SM USB Device
CD-ROM/DVD : IDE DVD-ROM 16X (CD 48X Rd) (DVD 6X Rd)
CD-ROM/DVD : PIONEER DVD-RW DVR-105 (CD 47X Rd, 31X Wr) (DVD 6X Rd, 4X Wr)
MultiMedia Device(s)
Device : MPU-401 Compatible MIDI Device
Device : Standard Game Port
Device : Creative SB Audigy 2 ZS (WDM)
Device : Creative Game Port
If anyone can help me get bit more from my PC I would be most happy
In games such as Vietcong and Hidden and Dangerous two I get pop up and some slow down - due to my monitor I HAVE to run games in 1024 res

KT3 Ultra wont run at 133fsb?

Ok.. I tried just about everything, but can't run this board at 133fsb, it runs fine at 100.
I found a thread here with best settingfor he KT3 Ultra and I tried them for same results...
The thing is it used to run at 133fsb before. The thing that changed is that I had a defective GeForce 4600 (MSI) and I returned it for repairs (wich they did) but while the card was on repairs, I went ahead and bought the MSI GeForce MX 440 8X agp, by the way thta is a sweet little card! but thats another issue.
After getting my 4600 back I was never able again to run the board at 133fsb, when I set it to it, it hangs when Windows XP first screen comes on, and sometimes even before that.
Any help anybody? while I still got a few hairs left ...
I been thinking on upgrading to a KT4 board, but wanted to wait a little longer, the KT3 has been a fine board up until now... Do you think I got a bum board, should I try to get a RMA and send the thing back?
Help!!! ;(

Adviced noted and apreciated...
The reazon I do the cleaning in the HSF unit is, I got the Volcano 7+ and I dont know if you seen the cooper grill, the blades are extremely thin and close together and are the perfect dust catchers... I only do this monthly thing during the hot months of summer when the house is warm and the HSF has to be switched at the highest RPM's during full loads ( game playing etc.), and it is not religiously "monthly", I do a visual check and if it looks clean enough, I wait till more dust is colected, or until I notice an raise by a couple of degrees or more for no aparent reazon in the cpu temp. Anyways, I found a neat little minivac at the office depot that comes with a brush head, the bristles in this handy gadget are perfect for vacuming the blades in the Volcano 7+, so there is no need for removing the whole unit any longer...
When I apply the Silver Arctic ( yes indeed, very conductive) I apply a small dub in the center of the cpu and then rub it a bit with my finger tip (dust and particle free) in a very thin layer, leaving about a milimeter clear in the edges to allow for a bit of "flatening expansion" that the pressure from the cpu on top will do.
I dont recomment the Silver arctic to less meticulous folks either, but if done carefully, it does a great, great job...
But I dont want to turn this thread into a CPU cooling HSF one, and at the mean time, I sure do apreciate the advice on the cooling issues, and hope the new doit yourselfers putting their PC's together take a mind note on it.
I am still puzzled by the 100 to 133 fsb issue, I think it might be IRQ related, I got to do some more reading on this. I run a 3 PC home network and never had this problem before, and I do put together all my PC's...
Txs again for the replays, I will post I ever find a solution to this, as I seen some other posts in the same subject.

KT3 Ultra Overclocking

I'm not really an overclocking buff, but if I were to get a KT3 Ultra and overclock the FSB to 166mhz, but lower the processor multiplier to approximately its rated speed, would I experience any horrible instability? Or would this be a very nice performance gain?
I'd be using 333mhz DDR for this, and as an example, say I use a 1.2ghZ athlon.
9*133=1195
7.5*166=1245
What kind of settings would I have to choose?
I would think the ram multiplier would be 1:1, but I don't understand exactly how to set the PCI and AGP dividers. What ratio would I set those at? Or are they not something you set?
Heh. Please excuse my ignorance on the subject.
Just looking for comments on the idea. )

Heh. I guess I've figured out most of the above. I know that the KT3 Ultra uses the 5:1 PCI divider when the fsb is set to 166mhz, so my question is this: Does the KT3 Ultra have the 5:2 (is that right?) AGP divider?
I'm also still interested in any issues with the overclocking I mentioned.
Thanks a lot!
-tuxmp

KT3 Ultra no boot!!!! Help!!!

I just got a KT3 Ultra and can't get it to boot.
have 300wt ps
amd 1000
Matrox g400 agp video ?(

Roy Stone, triple check the connection on the d-bracket, I have had these same symptomes a number of times from inserting things into my board and accidentally knocking the d-bracket out, I doubt your board is dead, but its possible.

Kt3 ultra/ gf3 ti200 random reset with 3d games

Im having random resets with a kt3 ultra and a MSI GF3 ti200, with 3d games; namely Mafia and Bf1942. Ive tried new drivers for the video card, checked the cpu temp, and bios settings. Any ideas on how to fix it or is their a compatibility problem with the mobo and the video card?

I found my 6380 v2.0 mobo liked 1 brand of ram more than other.I only run crucial,kingston or muskin(micron chips)ram.Put all bios settings to defaults & try only 1 stick(1 brand) of ram at a time.I also found my gf3 ti 200 & 500 liked certain versions of drivers over others.It would crash on some.Try original cd install drivers that came w/ vid :D card.Try running 3d mark 2k1 bencmarks to test all drivers & ram.

Fan monitoring with KT3-Ultra 2 (ignore prev post)

Ok ppl, here's the deal,
just contacted MSI and apparently the KT3-Ultra and the K7T-266 Pro2A use the same PCB (different northbridge thoguh... not sure about soutbridge) and they do not support fan speed modification...
i'm still waiting on an answer for the KT3-Ultra 2-R
can anyone with this board verify if fan speed changin in windows works?
regs
kurt

No, my Ti4400 is not the Champ ed. The actual model number on it is 8871 ver-1.00. You can read about my problem's in the "Have you seen this?....." thread on this forum (page 7 now I think)
I haven't had a problem in the last couple days though. I removed some Reg tweaks (this is a DAW box) and ....dont luagh, turned up the heat in my house. I'm not sure if it was the Reg edit or Temp, but things are working ATM.
Nice to know I'm not alone though,
C

KT3 Ultra + v5.7 BIOS -- weird behaviour

I have KT3 Ultra with newly flashed 5.7 BIOS + XP2100, 512 333DDR, Club3D 9700np, WindowsXP.
I had some start-up troubles after installing 9700np (8 beeps and no signal), which forced me to reset the system every time after power up to load windowsXP. So, I decided to flash the BIOS. Now, system boots up with no problems, but I've encountered a new problem.
Pressing ctrl+alt+del doesn't bring up the TASK MANAGER. All I get is the CPU USAGE window. Thus, processes, applications etc., those are gone. This means, basically, that I can't shut down programs that are not responding (not that I need to do that very often, but still...). Right clicking on the task bar and selecting TM shows me the same CPU USAGE window.
In addition, IE's pop-up windows that launch external programs (like some sites offering mp3 ring tones that I play with Winamp) cause IE to crash. Never happened before.
All this happened right after I flashed the BIOS. Any ideas?!?! Should I go back to 5.5 that I had before?
Thanks,
Thomas

This is pobubly off topic, but since the title is KT3 Ultra and Bios 5.7 I decided to ask here so as not to create a duplicate thread.
I to flashed my Bios to 5.7, but my problem is as follows.
After flash rebooted my computer as instructed, entered bios and verified all my configurations. Rebooted again. Windows came up fine but all text was garbled and unreadable. Reflashed 5.7 (thinking it didn't take). Again same problems. Had to flash back to 5.6 inorder to straighten out.
Bas any ideas?
Thomstucks:: Sorry to hear about your problem, and for jumping in on your thread. Have you tried 5.6?

MSI 645 ULTRA - DOES IT SUPPORT FAST WRITE -

MSI 645 ULTRA - DOES IT SUPPORT FAST WRITE -
coz i want to enable it so i can get higher 3dmarks score.
so i'm wondering if it supported but i think it doesnt but not sure.
k thx.

I am assuming here, that it is always on and that turning it off isnt a option via the less than robust bios' that MSI gives us. That being said, there is a utility called NVMax that allows you to switch it on and off as well as 2x/4x agp, assuming again, that you have a NVidia graphics card.
Try that Emazy, Im curious to see if you get lockups like I do when I check it off. For me at least, it appears to be on, but greyed out. Sisoft says that it is capable of fastwrites but not enabled.
As I mentioned before and as Assaf confirmed, the difference is negligeable and in most cases causes to instability.
I think Fast Writes was as big a hype as MMX was. :]

Kt3 ultra and 9600xt fast write

Similar Messages

Maybe you are looking for