Kt3 Ultra reboot problem continued

my old post (last weekish)
Above is my old post. Someone at the end of that thread told me to write down my blue screen stuff before i reboot...so here it is:
I get one of these two usually
Up near the top it says this
"This problem is probably an issue with win32k.sys file
PAGEFAULT_IN_NON_PAGED_AREA_
(further down)STOP:
Crazy stuff 0x00000af0f00a00 etc."
OR
"DRIVER_IRQL_NOT_LESS_OR_EQUAL
(further down) *** crazy stuff 0x0x000300b0v00 etc.
***classpnp.sys"
sometimes it won't say eigther near the top....but almost always that's what it says. I just ordered a new Asus A7V333 for 140$ arrg...so I'll probably keep that if I can't fix this problem pretty soon.

It seems we have the same problem taraturg. I saw your messages last week, and I have the same bluescreens.
They are like this:
STOP: 0x00000050
PAGE_FAULT_IN_NONPAGED_AREA
..........ntoskrnl.exe.....
...beginning dump of physical memory....
STOP: 0x000000D1
DRIVER_IRQL_NOT_LESS_OR_EQUAL
........v124nt.sys......
.......dump of physical memory.......
I have also run the memtest86 and after an hour or so there was no errors. My CPU temp are stable about 52-54 celcius. I run win2k with the latest updates, the latest bios(v5.6), the latest drivers. Everything you can get(!) And still this ( ) isn't working. What's wrong?

Similar Messages

Kt3-ultra big problem

i have just bought a kt3 mobo and am having some serious problems getting it to work properly.
the 1st problem is my cd burner or dvd will not install anything. if it is allowed to autorun it will stop giving various errors. and if i install by clicking setup.exe the same happens. also it sometimes restarts the computer.
i have plugged in an old cdrom which seems to work fine.
the 2nd problem is my broadband connection. i am using an alcatel usb modem and i cannot get it to connect to the computer.
i install all the drivers first then plug it in, it then says it found the modem and is installing it and completes with your hardware is now installed.
all that happens now is the lights on the modem looks like its going to work but then goes off then back on again.
this goes on for as long as its connected.
i am using :
windows xp
amd 1200 thunderbird
256 ram
400 watt power supply
kt3 ultra
ibm 80 g.b deskstar
i have also been swopping componants with my other computer and i know everything is working fine.
i hope someone can help because i have been trying for 10 days now to get everything running and i am pulling my hair out.
many thanks

Hi i have been having problems with my adsl cuting off and the modem lights paling up a reset will usually work to get it connected again. I am using an external sagem adsl modem and the power draw for it is 400ma, most other usb devices only draw between 2 - 10ma. This can cause the computer to hang and the modem to disconnect. To fix this buy a self powered usb hub that is capable of more than 500ma per port this will eliminate the problem. As for other power issues i have 3 cdroms 2 of which are writers i have a gforce 4 vido card network card and have had no advers affects from power other than the USB problem hope this helps
AMD 1600 (1400)
MSI 6380E
GForce 4 mx 440 128
2 X 256 pc2100
sony rewrite 52 speed cd writer
freecom 4X dvd +/- rewriter
3com 100mb network card
4 usb 2.0 ports
4 usb 1.0 ports
Sagem adsl usb modem
Creative labs soundblaster live soundcard

KT3 Ultra BIOS problem + question

Hi
after switchin on the CPU Halt command detection. My PC beeps 3 times after shutting down. D-LED says memory problem. When I turn off the PSU and after a while turn it on, everything is OK and PC boots normally. Does anyone know the reason of the beeping??
Question: has somebody tried (somebody very rich to afford buying Barton) Barton (or T-Bred FSB333) processor on KT3 Ultra??
thx a lot )

Hi,
Switching on CPU HALT Command will make your system unstable. That's the message of the beeps.
You should be able to improve this by using a better PSU. Otherwise, there is no reason of using CPU HALT command as there are many software CPU Coolers you can get.

KT3 Ultra cdrom problem

Ive been having some problems getting my cdroms, or any cdroms for that matter to work correctly on my KT3 Ultra (MS-6380E). The bios recognizes exactly what my drives are boots, and both windows and dos recognize that they exist but 99% of the time they will not read any cd's. They have this problem no matter which IDE channel i plug them into, but my hard drives have no problems at all in either channel. I've tried changing the IDE cable, plugging in only one drive at a time, messing with the master/slave settings, resetting my bios, updating my bios, drop kicking my computer and lots of other stuff.
Im almost certain that the problem is not with my cdroms because i dont see how they would both break at the exact same time and a third cdrom i tried from another computer would have the same problem. Im also fairly certain it is not a software problem because i have reformated, repartitioned, cleaned my MBR and virus scanned 900 times. I also have the same problem even with my hard drives unplugged completely and booting off a boot disk.
I dont see anything else that could be causing the problem besides perhaps a faulty motherboard but i cant find anyone that even has the slightest clue what is wrong, or any reference to any similar problems anywhere online. Does this sound like a something a motherboard problem could be causing? Here are my system specs:
MSI KT3 Ultra (MS-6380E)
Athlon XP 2000+
256 mb crucial pc2100 DDR SDRAM
GeForce3 ti200 64mb
SB Live! Value
Netgear NIC
40 GB samsung hdd
60 GB seagate hdd
the cd roms currently in my computer are a RICOH 4x4x8 burner and a generic 56x. Ive asked a ton of people and have been trying to fix this problem myself for months. Any suggestions would really be appreciated. Thanks.

80 wire ide blue end to board
tried them 1x 1 as some drives just will not pair up
does bios see them right,is that ide on auto
try as this guide as well
http://www.amdforums.com/showindex.php?s=&threadid=124482

Kt3 ultra reboots when 1gb ddr memory is installed

My kt3 ultra mb reboots when more than 1gb ddr pc2100 samsung memory is installed. boots through when 1 512mb ddr is installed or 1 - 512mb ddr - 1 - 256 mb ddr - I want to put all (3) 512mb ddr for a total of 1.5GB but always reboots. Im running 98se o/s. I even tried win2000 and also xp home?? Any suggestions. ?? Please help??

WIN 9X will recognize more than 512 MB ram but doesnt know what to do with it.XP or 2000 should run any amount your board can take. I seem to remember from a forum, either here or AMDMB.com or HardOCP that with this board you should do 2 sticks in the first and 3rd slot. I also seem to remember that this board was one of the few that Anand at Anandtech reviewed that ran ok with all 3 slots filled with memory.I can run my Samsung PC 2700 at cas 2 fast settings with 1T command disabled all day long.With 1T enabled it's reboot city.Double check your settings with the setup sticky at the beginning of this forum.Maybe try other memory? Good luck

[VIA] KT3 Ultra 2 Problem

"My KT3Ultra2 won't start ... there's no beep or picture shown on my screen.
The D-Bracket LEDs shows : "Initializing Hard Drive Controller" (two red on the up side, and two green on the down side).
i removed the HDD and it's worked on my other system.
can anyone advice me what should i do ??
Thank you so much.

Quote from: Grayone on 09-January-06, 15:26:35
Sorry, I missed the first line about it not posting. Sleepy, I guess.
Swapping parts like the video card between the two systems will eliminate that possibility since it could be power supply or cpu or video card that stops the boot process before it can initialize the hard drive controller.
Please furnish us more information about what parts are in the system? Create a profile containing info similar to I have in mine. The info will make troubleshooting much easier.
hi mate, thanks for the fast replies.
i had done all the sweaping of parts from one system to another. as for the power supply is a new one.
my system is using MSI KT3 Ultra 2 (MS-6380) running on CPU AMD 2100+
Ram is Kingston PC2700 333Mhz 512MB.
A Maxtor HDD 40Gig.
A creative Sound Card.
lastly a Benq CDRW.

Running in Safe Mode - are there any implications. ( a sub section of Rebooting problem continued...)

As with others I have become frustarted by my 9720 rebooting at random sometimes mid call and often at annoying times. I often have to take out the battery too, otherwise it will not restart. I have wiped, rebooted and even tried the 4hr 15 min trick all to no avail.
I am now running in permanent safe mode - the blackberry works fine and I hope I may have found a solution. Nobody seems 100% sure what the problem is caused by, if I have found a cure I'll be pleased, if however there are issues with running in Safe Mode I would be pleased to know.
I don't want toi change phones but the last few days have been very annoying.
Rogero

Safe Mode is not intended to be an "answer"...rather, it is a diagnostic tool to try and root out the cause of issues. It's sole intended purpose is to try and determine if any auto-running add-on or 3rd party apps might be causal to a situation, by suppressing the auto-run at boot up of those items. But, it is not intended to be part of any "normal operation" of the device.
If the results of Safe Mode are that the behavior continues, then other diagnostic steps must be conducted to try and determine the proper course of action. Quite often, there never can be any true diagnosis...but, rather, attempting a series of different remedies until the behavior is cured. For example, if OS corruption is the root cause, it can't really be diagnosed (especially at an internet distance)...rather, reloading the OS might cure the corruption and re-establish good operations.
But, reloading the OS might also cure other causes, so truly knowing exactly what the root cause is quite often impossible. And, if the issue is hardware (as with your suspicion of the battery), then no amount of OS or software "fixes" can truly be a remedy at all.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

KT3 ULTRA 2 PROBLEMS

GOD! where do i start,........just bought a system based around a KT3. ive had it about 4 weeks, running fine.then gradually things have started to go wrong.....reboots,freezes,cd access crashes,blue screens of every code under the sun! so i thought no bother ill reinstall......bad Move. ME crashes half a dozen times durin install and i end up with unstable desktop. so i tryed XP...not a chance! ive played with the bios settings for hours on end to no avail,so now im thinking whats the score ere like?some one just got to help me,before the shopkeeper gets it over his head!
So now i deffo think its hardware...the question is what! writing this on mangled explorer,nodrivers installed,sick as a parrot XP2000+ 500meg 80gig 7200 350wpower

+5v +3.3v
25a 15a
coolers sat right way round,fuzzy,s always gave me 49c average cpu ,although i tend to get abetter install from cold boot....maybe the shop used cack paste,i dunno....ive been thinking it was a heat problem, my system gets worse as it goes along.
its still under warranty so ididnt want to start leaving nasty evidence of my intrusion(scrape scrape)just needed some ammo to take to the shop.i dont really want to get into that'weve fixed it routine'....or 'nowt wrong with that mate' etc etc shops tend to give you.
any more pointers would be welcome ........ ;( thanks

KT3 Ultra video problem

After working fine for several months I've started having issues with my video card. Running Win XP, I'll have a video lockup, which Windoze occasionally recovers from saying there was a device failure, or a reboot indicating a possible hardware failure on reboot. The error message always blames the video driver. I've tried 2 different cards -- an MSI G4 4400 and an ATI Radeon 7500 I bought just to test, with the same results.
The box has an XP 1800, it was overclocked just a wee bit to 137 FSB. I've taken it down just now to see if that could be the problem, but I doubt it somehow.
I'm wondering if it might be a short of some kind. The only brass stands I'm using match up fine with the screw holes in the motherboard, but I'm not using any insulating washers as the case instructions didn't call for any. I'm assuming the screw holes on the motherboard are insulated, but the appear to be cased in metal. Can anyone tell me if this or something else may be the problem?

Tragically I've still had no luck. Considering I've tried 4 different sets of 4 in 1 drivers and had the EXACT same issue with each one I can't help but rule it out. I'm going to try leaving the case open tonight on the absurd suspicion that it's actually a temp issue (still reads 38cpu/30chassis so it shouldn't be).
I'm at a complete loss and would really appreciate any other suggestions. I don't think there's a hardware failure. I can't find any possible shorts on the board itself which would fit the symptoms. Argh!

KT3 Ultra 2 Problem ?

Last month I built my first PC for my brother. Everything has been working well up until today. The problem I have is that the monitor is displaying "No Video Input" When I boot up the PC there are no Beeps! and the system does not go to POST. I have had a look inside and there is no obvious problem, any help would be appriciated.
Chris

I tried what you suggested, took everything off the Motherboard, removed the CMOS battery and reset the jumper. I waited about 1 hour, and then put it back together with the minimum setup. Power on green lights on the D-bracket then red, going through the boot process, then it stops on three red's one green, which according to the manual means "the memory module is damaged or not installed properly", so I move the stick to the next slot, reboot and it goes back to the original problem two reds on top two green's on the bottom "initialising hard drive controller" and it stuck on that again from power on. Any further suggestions?
Chris

KT3 Ultra memory problem

my problem started after i ordered 2 crucial pc2700 512mb for my kt2 ultra board. after removing my old 256mb pc2700 kingston stick form the 1st slot, i put the crucial and slot 0 and 1 and booted. my comp started beeping and the flshing thing on the back indicate a memory error. so i turn it off and move the sticks to 0 and 2 booted again and now boots up fine. going into windows to check my 1gb memory and windows only display 512mb 1/2 of wut i have. so move the stick to 1 and 2 and still 512mb not 1gb. clear cmos, flah bios, unplugg power supply to mobo still the same problem. i remove all the memory and thought maybe ill use 768mb for now put the 256mb on slot 2 and 512 on slot 1 and windows registered it at 256mb not 768.
can somone plase help me??
my power supply specs if this helps
+3.3v:28A
+5:40A
+12v:18A

hi
sounds like a mobo where the memory slots is bad.
happens way to often.
but i suggest you wait and se what other people in here have to say so you dont run away and rma the board incase its something i dont know how to fix.
my knowledge is mainly on the k7n2 board.
i im downloading the manual and will check it to se if i can come up with something else.
16 minutes to go and i have 1mb cable internet.
talk about slow connection.
bye

KT3 Ultra-sound problem

Hey, all.
I recently had to reinstall Windows on a custom built system-everything came back OK excpet for the onboard sound. According to the device manager, these were several driver conflictions (including MPU-401), which I fixed with the latest drivers I could find. However, the sound still isn't working.
For some reason, every now and then on startup, the system detects "new" hardware, namely:
VIA standard PCI to ISA bridge
PCI host bridge
VIA standard CPU to PCI bridge
for all of these, the only driver it can find is Viamech.inf in C:\system.
I tried buying a new sound card (Hercules Muse LT) and no joy with that, either, so I'm assuming it's a problem witha driver somewhere along the line.
Any ideas?

Hey, guys-thanks for all your help-I finally got the sodding thing working!
I bit the bullet and reinstalled Windows (with the new sound card installed, hoping my system would use that as default over the onboard chip). First thing I did was run the latest 4-in-1....and got the exact same error messages with the drivers!
You can imagine what I was like ( ), and I started clicking angrily through the browse button, getting increasingly annoyed at the "Dunk!" error sounds coming from my PC, so I turned the sound volume down.
Hang on....error sounds?!!?!?
Hooray!

KT3 Ultra 2 Problems, help !!!

I just installed the my new KT3 Ultra2 mainboard but when I boot the screen stays blank and the diagnostics LEDs show 1 and 2 red, 3 and 4 green, meaning according to the manual : " Initialzing Hard Drive Controller" . There it'll stop. The Harddrive itself is ok cause I tried it in my old comp. ...what could be wrong ?

ohh...I forgott, and it makes 2 long beebs !

Problems with KT3 Ultra (MS-6380E)..please help

Hey all-
Here is my system configuration:
MSI KT3 Ultra MS-6380E) motherboard
AMD Athlon 2100+ XP cpu
(2) 512mb PC2700 DDR ram (1 gig total)
(2) 120gb Western Digital 7200rpm Harddrives (240gb total)
Nvidia Geforce Ti 4600 video card
Creative Labs Sound blaster Audigy Platinum
LG 32x10x40 CDRW
16x DVD ROM
400 watt power supply
Here is my problem:
Just built the machine, checked every plug and everything and when I turn on the machine I got no screen, no post, no beeps, nothing.
So I turned the machine, and cleared the CMOS. Turned the machine back on and got post , went into the BIOS, set the time,date, yada yada, all the drives were detected fine. I went in the Frequency/Voltage Control screen and the "CPU FSB Clock" was set to 100 mhz, "CPU Ratio" was set to Auto as was the "CPU Voltage, DDR Voltage, and AGP Voltage". I saved settings and rebooted but then I didn't get a screen, no post, no beeps.
I tried clearing CMOS again, turned machine on, got back in the BIOS just fine. I tried setting the CPU FSB Clock to 133mhz and left everything else on Auto. Rebooted and once again ..nothing.. no screen.
I don't understand what the problem could be. It seems that I can only get a screen when I clear the CMOS. But even if i use the "Load BIOS Setup Defaults" or even the "Load High Performance Defaults" I still get no screen or anything when I reboot.
Can anyone help me here? I have never run into this before.
Thanks in advance!!
Joe

If it is only doing it when you turn your bus speed of 100 up to 133 for the xp processor then I have had the problem. If you are booting with a bad cpu that isn't working properly (can't run at 133) then the computer will not POST. As soon as you clear the cmos it sets the speed back down to 100 for failsafe. If you try to boot a duron processor like a 700 or something on fsb 133 then the motherboard won't post. Make sure you don't have a duron processor instead of a athlon xp or a bad cpu. I would recommend taking it to the place you bought it or else an autorized amd spot. They should be able to throw in another proc and check it out.

KT3 Ultra 2 (MS6380E) - Not booting, D-bracket indicates problem HDD controller

I wonder if anyone could help me. Just yesterday my whole PC (4 1/2 years old) crashed suddenly (black screen, HDD spinning down) I tried to reboot it but to no avail. My D-Bracket indicators are as follows: upper two red, lower two green, which is during the initialisation of the HDD controller. I have already tried to boot it with the bare minimum but the problem persists. When i press the power button i hear all fans in the case spinning and the HDD spinning up but there are no beeps from BIOS and the screen remains blank (can't acces BIOS either). There are also some clicks coming from the DVD-ROM drive (reading light goes on and out) for about 5 seconds and then the clicking stops. I have already tried reseating and/or replacing with other models: PSU, memory , videocard, HDD and clearing CMOS both by using JBAT jumper and removing the battery for half an hour. Does anyone know other things to try? Thank you for replying.
KT3 Ultra 2
Athlon XP 2000+ FSB133
512 mb DDR333
400W PSU

Thank you for the replies.
Regarding the CPU fan (Zahlman), everything is working fine, never had any problems with it, no thermal issues with CPU at all.
The D-Bracket indicators do not flash during boot but immediately illuminate top two red, lower two green. Shouldn't all four indicators be red to indicate a CPU failure (according to my manual) ?
The clicking of the DVD-ROM drive also has me worried as it seems to indicate something's wrong with the IDE controller, but I could be wrong. Something I also noticed is that when i boot the PC with HDD but without DVD-ROM drive the HDD activity LED stays illuminated all the time, but when I connect both the DVD-ROM clicks and the HDD LED goes off after three seconds. I tried another DVD-ROM drive and the clicking stays. I don't know if this is significant for troubleshooting this problem.
Will disconnect all components again as suggested and leave the mainboard without battery overnight. Should i also set the JBAT jumper to clear data during the night? I think i will unscrew the mainboard as well (but leave CPU on it) and build the PC up from scratch.

Kt3 Ultra reboot problem continued

Similar Messages

Maybe you are looking for