KT3 Ultra (USB Ext CD-RW)

I have KT3 Ultra ARU for sometimes now and recently I bought an external USB 2.0 TDK Cyclone CD-RW.
I remembered I read in the user manual that I can boot from USB CD-ROW by changing the boot sequence.
Advanced BIOS features -> Boot sequence
My BIOS is 3.31a.
I wonder whether there is an error in the user manual? If it is correct, is it I need to upgrade my BIOS? ?( ?(
KST

if you set ist 3 options to none will it boot from it by
setting boot other device to enabled?

Similar Messages

KT3 Ultra USB D-Bracket problem

This is the problem: I connected the D-bracket to my KT3 Ultra board. But it doesn't work. Al least, none of the devices I connected to it (printer and camera) are found or seen by Windows. Windows does see a removable device but not the camera. Also the software I use for the camera can't find it. The bracket did work on a older board with Windows ME. But now it doesn't.
Do I oversee something?
Board: MSI KT3 Ultra (with latest BIOS revision)
OS: Windows XP home (with all the updates)

This is interesting. I have the same board, also running WinXP Professional with SP1 on it.
As long as I don't use a Bios later than Ver. 5.4 the USB ports work fine and connected devices are recognized and installed correctly.
However, installing any newer BIOS (5.5 - 5.7) will make the USB ports unusable. The (embedded) USB root ports stay installed or get automaticall re-installed when I remove them, but no device will be recognized and installed correctly any more. They will only be recognized as "unknown device" and that was it. When going back to BIOS 5.4, everything is ok again.
Since BIOS 5.6 is required to operate 2600+ processors this is extremely bad.
I would recommend that you try with an older BIOS (e.g. 5.4) and let me know whether you get the same results.
Heh...
I'v just gone through hell strugling with the USB on my KT3 Ultra under WinXP, untill I got here... fortunaltely. After I flashed my Amibios to 5.7 or something all USB went dead and I couldn't believe that updating something makes it worse... but guess thats the case. Well I'm happy they keep the older versions available but still these (known) bugs should be on somekind of messageboard so you woundn't have to search all places wrecking your nerve along on the process. In addition I'm not a big fan of flashing bios every now and then.. don't think u are either. I think This forum really helps people ....!!

KT3 Ultra - USB Trouble

Hey, im having some trouble getting the USB-ports (The 2 on the board, not the extra on the "cards", they are lost) working on this m-board.
First of all the USB devices where disabled in BIOS but that is fixed.. but here comes more trouble. WinXP found new devices when i started the computer after i enabled the usb in bios. But, i cant find any drivers for "Universal Serial bus" , and its under "other units" in the device manager. But.. the "VIA Rev 5 or later USB Universal Host controller" and USB-Hub is found, drivers found and prolly working.
Anyway.. what should i do?!
Excuse my bad english and bad translatíon.. im swedish

"...and its under "other units" in the device manager..." It should appear as a separated item after Net devices or Net adapters. Perhaps could work deletting all USB items in Device Manager, reboot and let W XP reinstall all of them.
Did you load SP1 for W. XP ?

USB 2.0 on KT3 Ultra (NEC chip)

Last December I bought a Hauppauge Win TV Nova-T USB unit for digital TV and Radio. I thought I'd make use of the USB2 sockets. The USB2 sockets work no better than the VIA USB1 sockets. Performance appears to bandwidth limited. The problem exists with XP SP1 and WIn 2k SP3 (with the patch from the MSI driver page). I have in the Device Manager 'NEC PCI to USB Enhanced Host Controller B1' which is what is supposed to be there. All updates got from Microsoft. Resources for this Controller shows it's using IRQ 16, along with the Graphics card and Firewire PCI card. Using ACPI it cannot be moved.
I've just got hols off the Sony DRX 500 UL USB2 DVD writer. It has both Firewire and USB2 interfaces. Firewire works a treat but USB2 wont. It identifies the Sony OK but Nero crashes usiny the USB2.
Everything points to the NEC chip.
My mates bought a KT3 Ultra 2 (with the VIA USB2 chip) and it works a treat.
Anyone got an NEC chipped mobo with USB2 working?

Hi,
AGP and USB are allway's tied together.....
But as you are using IRQ16, it means you have APIC turned on...
You need to change the HAL if you change the APIC, see the good article forum on this.
You might want to run without APIC, not all devices/drivers like this....
Also, check out the Nero page for updates....
And a good USB side is http://www.usbman.com

KT3 Ultra ARU Lock up

My sig has everything I know about my computer.
I usually at 47 deg CPU and 42 System
the Hottest is 50 deg and 45 system and it did not
lock up.
It seems very arbitrary. No program or game etc. specificly is opening or closing at the time of lockup.
Sometimes i am AFK and it will be locked up when I come
back.
My cursor pointer will move around the screen however.
Help ah. What else can I check??
Thanks for any help.

You can have a look at my hardware below...
Chassis: Antec 1080B (300w PSU / 180w COMBINED)
Mainboard: MSI KT3 Ultra ARU
CPU: AMD Athlon XP 1800+
Display: ABIT Siluro GF4 Ti4200 AGP 4X
DVD/CD-RW Combo: HL-DT-ST RW/DVD GCC-4120B
Floppy: Panasonic 1.44MB
HD: Quantum Fireball Plus/AS 30.0GB UDMA 100
Keyboard: Microsoft Internet Keyboard Pro
Monitor: KDS Visual Sensations VS-190
Mouse: Microsoft USB Wheel Mouse Optical
NICs: 3Com 3C900B / DLink DFE-530TX
RAM: Micron DDR 266MHz (2x256MB DIMMs)
Sound: Avance AC'97 Audio
I'm having similar problems where my system becomes very unstable at higher bus speeds. However, I have ordered a new PSU today as a solution to this problem. Basically, CPUs and video cards are much more demanding and the more devices you have in your computer the more power you're going to need. I recommend purchasing the Enermax EG465P-VE (FCA) 450W ATX PS. It has a higher amperage rating and will most likely solve your problem.

Anyone using BlueTooth with MSI KT3 Ultra-Aru?

Has anyone setup BlueTooth PC to PC network with the MSI KT3 Ultra-Aru?
Where can one get the transmitter? (assuming it works)

Quote
Originally posted by cje1985
i have a kt3 ultra aru it says it has blue tooth and on the usb 2.0 dongle it says do not remove if you use bluetooth but when i follow the manual to plug it in windows or the software finds the bluetooth connection
Hi,
I have a KT3 Ultra ARU too, and I understand that if you use the onboard Bluetooth connection you must not use the USB connection under the blue sticker at the same time.
I think it's because the onboard Bluetooth connection and the USB connection under the sticker use the same adress (IRQ). So as long as you have no Bluetooth, like me, you can use the 4 USB connections. If you use Bluetooth connection on board, do not use the USB connection under the sticker (the left one seen from backside of your PC).
If you use an external Bluetooth it's not a problem with your 4 USB connections.
ralcan

MSI KT3 Ultra ARU 5.7 BIOS and SoudBlaster Cards - Audigy

I have flashed my BIOS to 5.7 Version and my sound card start to make a lot of noise (crackling) when play AC3 or DVD. If you dont want to use the new AMD CPU 333 FSB you dont need to flash the BIOS - I have Flashed to 5.6 again but, if you want to use a 333 FSB CPU you can flash the BIOS to version 5.7 and if have sound problems use the PCI latency patch for VIA chipsets.
VIA chipset MotherBoard owners who have through all of the above and still have sound problems with their Soundblaster cards, might want to look into the PCI latency patch for VIA chipsets - get it here:
http://www.georgebreese.com/net/software/
(scroll down the page there just a little to get to it).
There's also a similar page about resolving sound problems on Via chipset based computers here:
http://www.deinmeister.de/mvp3_zlt_e.htm
I hope this post help somebody
Mário Silva from Beja - Portugal
My System:
MSI KT3 Ultra ARU
Athlon 2400+
512 Kingston PC2700 DDR SDRAM
MSI Geforce4 Ti 4200
SoundBlaster Audigy
Windows xp Pro SP1
400W PSU
Creative Drx3
Pinnacle PCTV pro
HDD Maxtor 80 GB UDMA 133
DVD Pioneer slot in
RW Samsung 48x16x48
Creative WebCam Go
UPS 500 VA
Monitor Sony 19" E400E

Since my chip is an unlocked, I cannot easily run it at the default, but I can underclock it. At 100x6.0=600mhz, USB does not work, as well as 100x12.5. Same with 133x6.0 and 133x12.5. It appears to make no difference underclocking or overclocking.
I downloaded the right BIOS listed on MSI's KT3 Ultra-ARU page. I don't think the BIOSes are different anyway, since the same files, changelog, and etc are also listed for the Ultra-2 board.
A thing to note, that this is the onboard VIA-controller USB ports doing this. My Ultra-ARU's NEC-controller USB 2.0 ports work fine in both Win2k and Linux if I hook my mouse and keyboard up in those. This is not an ideal solution for me though.

MSI KT3 ultra aru Western Digital 200GB raid problem

Hi!
This is what I've got.
KT3 Ultra-ARU (MS-6380E)
AMD 2000+
256 MB 333mhz RAM (AMD Compatible)
Seagate ST330630A 30GB (an old drive)
Maxtor 6L080J4 80GB
Maxtor DiamondMax Plus9 6Y080L0 80Gb 7200rpm 2Mb UDMA133 Fluid IDE
Western Digital Caviar WD1800JB 180Gb 7200rpm Special Edition UDMA100 IDE
Western Digital Caviar WD2000JB 200Gb 7200rpm Special Edition UDMA100 IDE
Promise 100 IDE-controller
Creative Geforce MX 440
Lite-on LTR-40125W
NEC ND-1300 DVD
And the configuration:
IDE1: Seagate (Master)
IDE2: WD1800BG (Cabel Select)
IDE3(Raid1): Maxtor 6LO80J4 (Master) and Maxtor 6Y080L0 (Slave) raided as an single drive
IDE4(Raid2): WD2000JB (Cable Select)
IDE5(IDE-controller1):
IDE6(IDE-controller2): NEC ND-1300 (Master) and Lite-on LTR-40125W (Slave)
And the Software:
I've updated all the software drivers so I've got the newest and I'm currently runnign Win2k SP3 with almost every patch installed on it.
And finally the problem:
When I've hook my WD2000JB to the on-board raid everything seems to be working normaly. The bios finds the drive and makes a new array. Win2k boots up and finds the drive and I can create an partition. But when I've try to format it it the computer starts to freeze for a while and then acts like normal again. The HDD-led blinks as it should during the "normal" time, but when the comp. freezes it stops blinking. The formatation stops at 7% and the HDD-led stops lighting. I don't get an error eventhough it was several hours since it stoped. And the formatation takes like 30min for 1%.
When I connect the WD2000JB to the IDE3 I can format it and it acts just like normal. I even did a full system test with the System tool found on Western Digitals support site and it didn't find any errors. But when move it to the raid-IDE the errors return. I've get Error reading / writing to disk and when I've did a chkdsk I've got the "Coudn't use Device) so I did a scandisk and it found very very many errors so it completly ereased everything that was on it.
And when I've run Western Digitals program again i've get an error (Disk error read/writing) error code: 0113.
Can it be that the Western Disk doesn't work well with Raid? I've haven't heard anything about that, so...
Best regars,
Mathias

You can have a look at my hardware below...
Chassis: Antec 1080B (300w PSU / 180w COMBINED)
Mainboard: MSI KT3 Ultra ARU
CPU: AMD Athlon XP 1800+
Display: ABIT Siluro GF4 Ti4200 AGP 4X
DVD/CD-RW Combo: HL-DT-ST RW/DVD GCC-4120B
Floppy: Panasonic 1.44MB
HD: Quantum Fireball Plus/AS 30.0GB UDMA 100
Keyboard: Microsoft Internet Keyboard Pro
Monitor: KDS Visual Sensations VS-190
Mouse: Microsoft USB Wheel Mouse Optical
NICs: 3Com 3C900B / DLink DFE-530TX
RAM: Micron DDR 266MHz (2x256MB DIMMs)
Sound: Avance AC'97 Audio
I've had similar problems where my system becomes very unstable at higher bus speeds. Installing Windows XP simply didn't work very good. However, I have ordered a new PSU today as a solution to this problem. Basically, CPUs and video cards are much more demanding and the more devices you have in your computer the more power you're going to need. I recommend purchasing the Enermax EG465P-VE (FCA) 450W ATX PS. It has a higher amperage rating and will most likely solve your problem.
Check your PSU and your bus speed settings...

MSI - KT3 Ultra-ARU Raid + XP

Hi,
I have just built a new system using the MSI - KT3 Ultra-ARU motherboard and am having issues instaling Windows XP professional.
The system has been set with 2 Maxtor HD on Raid 0 Stipping.
On installing Windows XP and Raid Driver 2.0 that comes with the board, XP continues to load the files needed for setup, while in this process it will have a read/copy error. As much as you retry it will not read. This happens on different files each time I try to install and is not a bad CD.
Any suggestions ?

You can have a look at my hardware below...
Chassis: Antec 1080B (300w PSU / 180w COMBINED)
Mainboard: MSI KT3 Ultra ARU
CPU: AMD Athlon XP 1800+
Display: ABIT Siluro GF4 Ti4200 AGP 4X
DVD/CD-RW Combo: HL-DT-ST RW/DVD GCC-4120B
Floppy: Panasonic 1.44MB
HD: Quantum Fireball Plus/AS 30.0GB UDMA 100
Keyboard: Microsoft Internet Keyboard Pro
Monitor: KDS Visual Sensations VS-190
Mouse: Microsoft USB Wheel Mouse Optical
NICs: 3Com 3C900B / DLink DFE-530TX
RAM: Micron DDR 266MHz (2x256MB DIMMs)
Sound: Avance AC'97 Audio
I've had similar problems where my system becomes very unstable at higher bus speeds. Installing Windows XP simply didn't work very good. However, I have ordered a new PSU today as a solution to this problem. Basically, CPUs and video cards are much more demanding and the more devices you have in your computer the more power you're going to need. I recommend purchasing the Enermax EG465P-VE (FCA) 450W ATX PS. It has a higher amperage rating and will most likely solve your problem.
Check your PSU and your bus speed settings...

PC Component power requirements on a KT3 Ultra-ARU: ANSWERS - At last

G'Day Folk,
First, my PC specs are as below in my sig.
Second, I know this is an old motherboard, but I would like to keep it going, and make the best of it for another year or so. Any help would be greatly appreciated, and would help two other users!
Symptoms:
Minor stability and performance issues, mostly in games, simulators, or doing high resolution photographics processing. I bought three machines with similar specs in 2002, for my brother, father, and myself. Each has had some hard to nail down, intermittent problems. My brother's PC has had a new motherboard and processor after failure of the KT3, but still has some niggling problems. He also has an XP 2600+ running at 65C !
More recently I have been able to reliably reproduce graphics problems in Empire Earth II, Serious Sam, and Halo. Specifically, I can create the problem in an Empire Earth II game by running a saved game and looking at a specific spot on the map. The screen shows tearing, and eventually goes black, returning to normal dispaly when I move to a different part of the map. In certain Halo games I could cause the problem by looking in a specific direction. I assume this is because what is being displayed is using different or more graphics processing features, although it is not apparent what they may be from the content of the view.
Being able to reliably reproduce the problem allowed me to actually analyse the cause.
Diagnosis:
After upgrading all drivers, and trying everything I could think of, as well as everything I could find on the web, especially in this forum, I have narrowed the problem down to the power supply. The clincher for me is that when I create the problem the 3.3Volt power supply line (rail) drops to as low as 2.45Volts! The +5V line also fluctuates and drops as low as 4.81Volt. This was measured using MBM5 and MBM5 Log. The usual voltages reported by MBM5 at idle are +3.3V rail = 2.99 to 3.01 Volt, +5V rail = 4.92 to 4.95 Volt.
Okay, so the +5V rail stays in spec (just), but the +3.3V rail is out of spec (+/- 5%) even at idle. It should be at least 3.135Volt.
I checked the voltages with and without the problem using an analogue volt meter, as software voltage readings are often low. The volt meter is a little slow to respond to the voltage fluctuations, but did confirm that at idle the +3.3V rail was less than 3.1Volt (out of spec), and with the problem occuring, dropped at least to 2.8Volt.
As you can see below my power supply should be able to handle all I throw at it. Topower isn't the greatest brand, but it does receive "satisfactory" in reviews on Tom's Hardware and such. I suspect it (and my brother's and father's) has always been weak, although age, or more powerful games may be highlighting the problem.
Solution:
Get a new power supply.
Not so simple these days, particularly if you want to upgrade in the future, with the move to powering components using the 12Volt rail. I want a power supply that will power my current +3.3V and +5V hungry motherboard, plus future 12V requirements, if possible. So I am doing a Power Audit of my PC, hence . . .
Questions:
I have collected power requirements for most of my components in Ampere by supply voltage. However, details are hard to lock down. I'll jump straight into specific questions.
1. The Athlon XP 2100+ draws a maximum of 89.9Watts into the Voltage Regulator Module (VRM), which converts it to the CPU supply voltage of 1.75Volt. (About 51Amps. Ouch!) If this is sourced from the +12V rail as suggested by the AMD Athlon Desktop Builders Guide, then this would be 7.49Amp, and would not effect the +3.3V and +5V rails unless the total power capacity of the supply is being exceeded. However, the CPU power source was changed from the +3.3V and +5V lines to the +12V lines around the time of the XP2100+. I don't know what MSI did on my motherboard.
Can anyone confirm which voltage rail is used to power the XP 2100+ on the KT3 Ultra ARU motherboard?
2. I have found average power usages for motherboards of around 25 Watt on many web sites, but can't confirm the power used by the KT3. Does anyone know the maximum current (Amps) for each voltage rail from the power supply for this motherboard?
3. Memory power requirements also vary a lot on the web. I'm using 10Watt each on the +3.3V rail for two sticks of 512MB DDR Corsair. Can anybody confirm this, for the KT3? (10W per stick seems to have been the standard since 128MB sticks came out!)
4. I have a GeForce 4 Ti 4600 AGP graphics card. (Okay, it's not an MSI, but the power should be similar across brands.) There are several threads that suggest that this card uses lots of +3.3V and +5V power from the AGP slot. (Wonkanoby?) However, none give actual Amps for each rail. Anybody know?
5. In case anybody knows, I can't find actual power for an Audigy 2 ZS either. Any suggestions?
As modern power supplies tend to have reduced +3.3V and +5V capacity in favour of +12V, I need to be pretty sure of the actual requirements on these rails before buying a new supply. I could just "go and by the biggest Antec I can find and don't worry about it", but I might find that it has the same problems my existing one does.
All help greatly appreciated. Selection of a new PSU could fix three PCs, mine, my brother's, and my father's.
PS: My apologies to those I told that this was a great power supply. Well, it has great specs, and the problems observed couldn't be tied to it until recently. Bummer really.
PPS: Sorry for the long post, but it's an interesting, and important topic, isn't it?
UPDATE: See post on 1st March, 2006 for response from vendors and updated table of component requirements.
Here is a copy of my signature in case I change it in the future, just for context.
MSI KT3 Ultra ARU (MS-6380E V1.0), AMI BIOS 5.7
AMD Athlon XP 2100+ Palomino 1.73GHz @13 x 133 FSB
2x Corsair CMX-512-3000C2 512MB 2-2-2-5-1T @333MHz
Leadtek GeForce4 Ti 4600 Winfast A250 Ultra MyVIVO 128MB (AGP)
Creative Sound Blaster Audigy 2 ZS
2x WD Caviar WD1200JB 120GB 7200RPM 8MB Cache,
each drive enclosed in a Scythe Silent Box Heatlane HDD Enclosure
CD&DVD Plextor PX320A & Pioneer DVR-A09P
Topower PSU 470W PFC 3.3+5V=235W +3.3V/26A, +5V/47A, +12V/28A
mCubed T-Balancer Fan Controller,
multiple quiet fans: Zalman, SilenX, Panaflo, Lian Li blower
Zalman CNPS6000-Cu & ZM-NB32J NB HS
~ 10-20C over ambient
Lian-Li PC-60 Case, WinXP ProSP2+

Try the link below, this will tell you what you need. After you added all you hardware and get the final power result add 50% to this and you will have the proper size P/S needed for your system. You can even make a list of future upgrades you want to do and that way you can see what P/S will work for you now in the present and what you would need in the future, just remember to add 50% to what ever total you add up.
For example, if the P/S calculator says you have a total draw of 279W then you would add 50% to this;
279+50%=418.5
http://www.extreme.outervision.com/index.jsp
Below I have pasted a piece that I made for determing P/S which may help you to;
Resets are a P/S issue and lock-ups are most likely due to your graphic card, with that said I will give you a table with which you can determine the proper P/S for your system and a little info just for info.
I must also add that never trust software to tell you your voltages, this includes the BIOs as the BIOs is just a piece of software. To properly check the voltage one must use a digi-VOM.
A 7200rpm HD draws around 20 watts, this 20 watts includes both the 5v & 12V rail.
HD and CD's generally are figured at 2 Amps per device, let’s brake this down some.
Spin-up: 12V x 1.3A + 5V x 650mA = 19W
Read/Write/Idle: 12V x 350mA + 5V x 700mA = 7.75W
Seek: 12V x 675mA + 5V x 725mA = 12W
Those would be typical for a 7200 rpm IDE drive. As you can see a HD requires more power at start-up then during actual operation. This is why sometimes a PC takes a few tries to start up before it will actually make a successful boot and once it boots to windows all seems well or sometimes a occasional restart, which would indicate a weak/ bad P/S.
Now to find the power used by the CPU you can check either AMD or Intel for the spec sheets on that CPU or you can follow this link that has tons of CPU ratings, CPU specs.
Some more basic mathematics… When a 12-volt circuit is drawing 10 amps, it is consuming 120 WATTS of electrical power. 12 Volts X 10 Amps = 120 WATTS.
This is the formula: P = E x I
P - Watt (power)
E – Voltage (electrical pressure)
I – Amperage (current flow)
Serial/PS-2 ports draw <35mA and if you have USB ports then they have a maximum of 500mA per port, again only if they are used- no use means no draw.
The PCI slots are allowed 5A of the +5V, 0.5A of the +12V and 7.6A of the 3.3V Max per slot, again that is if the slots are used. So if the serial ports, PS-2 and USB ports are being used you are looking at around 5A draw on the MB, which would be around 20 Watts.
So now we can add things up. (This is just an example of a basic system)
MB=20W
CPU= 60W, used as a norm.
HD=20W
CDRW=25W
DVD=20W
Graphic card=15W / newer GF4 and ATI 9000 and up= 35W
RAM 10 Watts per 128 MB
Network Card 5 Watts
Average per PCI Card 8 Watts
Total around 200W for this example.
Now this will fall on different rails and that is were things get tricky, because as you see in my above break down of the HD that a HD use's both the 12V & 5V rail. This is why it is important that the 12V rail be at least 18 Amps if you plan on having more then 1 HD and case fans. Then you have the 3.3V & 5V rails that need to be strong too, the 3.3v rail is actually not so important with newer DDR MB and today’s CPU’s as it is mainly supplying the PS-2 ports power as well as some device cards. Most newer MB use the 5v and 12v rails mainly to supply the demands of today’s devices.
Now this 200W is the bare min what is needed for things to run but in the real world you will want to add 50% to the 200W for your min P/S need, this allows room for spikes and heavy demands and a little head room to add hardware in the future.

My KT3 Ultra Experience (from the nightmare to a running well system)

Well First...
I don't speak a well english, maybe because still think in spanish, so maybe find many gramatical errors.
the very very begin
The history begins with a terrible electric shock in my house, i got a Athlon XP 1700+ with a cheap PC Chips Board (810)..yeah the all in one board (video, modem, ethernet, sound) build my first system with a mixture of expectatives and dreams with my first AMD athlon XP , the system running well, before got the "great idea" to plug a Zoltrix Genie TV card for record South Park, everything is OK, so, i think that i abuse the luck, and a rainy night, i surf the net ( a XXX one... ATK... never forget that site after this) a electric shock enter trought the tv cable searching ground, someone that got this experience maybe feels a demon in a box, a white light come out from the back of the system and hit the isolated regulator ( with the sparks and all the stuff ) the light goes out and a tasty barbecue smell fill completly the room.
ohhh...
the list of cooking components:
   Athlon XP 1700+
   PC Chips 810 (a/v/r/s)
   Maxtor HDD 40GB
   Zoltrix Genie TV
   Mouse (generic)
   Keyboard (generic)
   Microsoft sidewinder gamepad
The miracle pieces:
   256MB DIMM sticks from crucial (PC 100) two of them
   External CD Burner HP CD-Writer 8230e (USB)
   Philips Monitor 17'
i learn to never watch a porno site in a rainy night... it's really bad for your system
build another system "da plan!"
in a trip to Bogotá i search in the computer mall called UNILAGO, the new system board, someone callit MOBO, my idea are this:
A Boxed Board. Candidates like ASUS , Gygabyte, MSI, with the VIA 333 chip are required.
we search in all the place, asus show its A7V333 model, but its too expensive in the price that this guy offered (maybe think that i don't search the pricewatch.com page before go to the mall... je je) in a place some guy show me a very nice box... i think the first impression counts, its the kt3 ultra board in her shiny box, next tactic ask for minimun price (...no minimun price got this board...) so i pay 360 thousand pesos for it.
wen come back to Cali ( the place i live) and after got some pesos in my bag i go to the computer mall in Cali called La passarella (remember the argentinian soccer player?) for buy the components.....
the list is this:
   Athlon XP 1800+ BOXED (got the original AMD heatsink)
   DDR RAM PC2100 256 MB
   Genius Netscroll Optic
   Genius Keyboard
   CD-Rom LG 52 X
   Case with a 300W ATX Power Supply
   Realtek Ethernet Card (Encore)
   AGP Video card with the SIS chip 315 128MB of ram
   Genius Maxfire USB (i buyit for the cheap price and anyway i don't play too much in a computer so i dont need a Nvidia Ti thing or a gamepad expensive)
wen go to the house, plug all the stuff and the process it's fine, no complicate things occur, i do two modifications first
1)to the AMD heatsink, the clip come in the other side, so i need to unplug the Power ATX supply for attach it and don't want to do the same thing every time that retire the heatsink, i disarm the heatsink and turn the clip to the other side, no problems with this mod...
2)i don't use floppy disks... I HATE IT so the place of the floppy converts in the place for the D-Bracket with all the lights and two USB... nice because i perfored the case in the right way and the usb and the lights come in the front of the case...it's a easy mod...
all the things come well so turn it ON...
KT3 Ultra first Round!
well i don' pay much attention in the first time that power on the system and hit the del key.... nothing happens and a letters of searching array and scanning devices show... after this process the amibios screen shows (the blue one, and still today don't find the option for change the color scheme like te PC Chips amibios options got) in this point i know that the rule "search the instruction booklet" it's totally necessary for many options the options that i disable and some that enable are this:
    in integrated peripherals disable the ata raid option (remember the scan devices screen?) i plug a maxtor ATA 100 hard drive to the ide cable because don't know if this hard disk works with the Raid Option maybe not because is ata 100.. so disable the option
    in power management options i activate the CPU critical temperature to 70°C
    in advanced bios settings i enable the MSI link to the future screen... nice, SMART for HDD enable. In the boot secuence put first CD-rom and later HDD
    in standard CMOS settings put the hour...(uh!), and obvious disable the nasty floppy drive (BOOT CDS REPLACE THE NEED OF FLOPPY DRIVES...)
    in PC health disable the intrussion option, because i don't have the switch for the case...
    in frecuency and voltage i find the FSB in 100Mhz but i don't change anything in this point...
after this tiny modification, i save the changes and restart....
the system boot with a CD he he... with a image of the win98 boot disk, so i formated and fdisk the drive... tooooo fast in this point.
after partition the HDD in 5 pieces and formating every partition, i reboot the computer for installing Win98...
the installation goes normal, and install all the MSI software (only for know what apps are appreciable por me) i don't have any problems, install all the drivers for every single hardware piece and the system works well... so testing es the next point.
KT3 Ultra first test after the installation
well i feel that my job are easyly...(ji ji) and all the process go OK so testing my new machine gotme like a child.
i run the test of SiS for the AGP card ( 3D thrill ) the demo of the card got a cosmic scene, comes very fast, i try to watch if someone piloting the space ship, and maybe see something
the sound are good for the include sound chip in the board, put and test all the effects and test...ok ok... nice.
microsoft direct X got some testings so i run it too ... write in run command "dxdiag" and ready for the tests, in this point i feel free to install a copy of "formula 1 2002" in the machine some guy borrowme a copy, wen i try to install got a n error.... (the first one) and the game don't install ... i reject the installation and try another game, in this point i search the Athlon XP Oem.bmp file for branding my new system... je je, and hit the window key and pause and i find that my processor runs in 1.1 Mhz... (what!!!) if this CPU is a 1800 and this speed maybe is wrong....so i read the boocklet and find in the FSB option the way for put the CPU in his real Mhz...(1.53) in this point begins the troubles...
KT3 Ultra damage my CPU??????!!!!!
Wen enter to the bios i got direct for the FSB option and put it to 133Mhz maybe this thing it's easyly too, i think, i made and save the changes... and.....
A BLACK SCREEN COMES AND I SEE THE FOUR LEDS IN RED!!!!
AHHHH!, i thinks that this processor pases to a better life after this point, with shaking hands read again the boocklet and find the interpretation for the 4 red leds signal, damage or bad installed processor.
oh, so what i do...?
i continue reading for a little FAQ in the boocklet, and nothing, only a glossary, i call a friend to helpme... ( the true geek one) the guy tell me to reset the bios with the jumper... so, i don't loose anything with this and do it...
wen the computer reboots the signals come to life... (ufff!) and the scanning device creen shows again... so i need to save again my settings.
i do all the things and save, the system turns on and windows 98 load normal again... i try to fix the FSB thing in other time i think, and continue intalling some programs.
In my CDs find a copy of formula 1 2001 no de 2002 version, because this version i installed in my other fried system i installed in mine for show and prove the 3d card...
the installation works fine and terminate ok, wen i hit the icon to play, the 3d settings window appears i select some options 800x600 32bit color and press test, a blank screen comes with some little caracters, in some point wen the test come back my system frozes and nothing happens... OHHHHHHH! what happens?.... i think, i decided to check the temperature values because in this point think that my installation fails in the put heatsink process.
i load PC alert and find CPU temperature in 78°C... oh, it's too high i think so shutdown the system and check the heatsink for anything that miss in the first time.
i put again the heatsink an log to the bios for check the values....
this is the values of PChealth option in bios:
   Cpu temp : 71°C and stable in this value...it's high too
   System Temp : 38°C ...high too
   VCore      1.744V
   +5.0V       5.038V
   +12V      11.923V
   -12V      -11.497
   -5V         -5.026V
   Batt      3.24V
   +5VSB      4.969
some ideas come to my mind and try to think if some options of the bios, the best performance option it's a good point to start i think so i select and save the changes...
oh, oh, the black screen comes again.... buuuuuu! and the four red leds too....buuuu!
mmmm, ....what i do?, what i do?....i reset again the bios, for the options and try to boot the machine again... maybe leave the system in the first point i think but nothing prepare me for the many "chorro" of errors thath follow after this point....
If i can roll back the time....
i think to be superman and fly in a oposite earth direction for roll back the time... (luisa!)
the system begins a non stop errors secuence sometimes the four leds are red, sometimes tree leds red an the top right led green, in the book says this signal is for damage DDR ram...
wen windows 98 loads the system frozes in some points, and wen enter and run some test the system frozes too...
i reset the bios to the original form an try to leave the house excactly wen enter the first time... i save it and the errors continues...
with NO hope of correct by myself the issues i turn on my old K6II system and find the MSI forum that got some mysql errors
in the forum find the Power unit suplly issues, i got the ATX box and 300W maybe it's too low i think after MANY post with same errors like me, i think to made a program plan for recover the stability and my ideas come in the next point.
now need another message to continue....

Return the system to the "normal" or less stability
In the forum (thanks for the people thath participate) some people says issues of frozen systems because cheap ATX power supply, some other got problems with the heatsink, i think that a mixture of those issues gotme like mad and try to figure out the quality of a atx power supply that changes the performance after a bios setup... ( it's a very cheap ATX power supply, i think) the Power unit now don't support the energy, and power needs of the system in some cases wen i run the 3d accelerated test the system frozes wen i hit "test".
return today to the computer mall passarella, and buy this items:
   Vulcano 7 (it's a building no, it's a airplane no,... it's vulcano 7 with speed sensor incorporated, much bigger than a building and more CFM than any airplane make!)
   ATX power supply 400W for kicks power requeriments and maybe extract energy enough for a reading lamp...
   wen come back to the house i install the new parts, the vulcano 7 needs the same mod than the other AMD one, or maybe MSI put the sockect A protect clip layer in the wrong site, maybe the board fit well in a ATX-XL case for no uninstall the power unit to put the heatsink... anyway need to uninstallit but this issue it's funny.
wen everiting it's ok i turn on the system...
KT3 Ultra Runs smooth... FINALLY
i know thath every body needs to listen a couple of help tips, in this point i think that logged to the forum are the best idea that i got, many people got the same problems and if you don't ask or search you think thath the MSI board it's a terrible board, and this no true, and because it's red too.
the system loads normal and i think to go up the FSB to the NORMAL 133 value for this athlon XP 1800+ i change the values, save and reboot the first thing that i find are the bios recognize the Amd Athlon XP 1800+ in the first black screen ( wen disables da logo) later, web hit windows key+ pause the window says Athlon XP 1800+, in the fuzzy logic app i find the values of 1523 Mhz and the temperature don't rises 50°C it's now OK, better than the cooking eggs thing that got before the changes.
now i need to give some thanks..
Thanks
to all the people in the forum, i don't write a nice english but i know read and it's enough for take a easy living style with this machines...
MSI people thanks
for the people in the mall, they don't know much the Power unit issues of this board it's a bit more exigent than others in his point.
to my dog that share my angry in the late night, it's a good one that dont' sleep well wen i work in the night..
so to all the people thanks for made this posible, maybe this long post with less technical things works for put your boards well.
Victor Hugo Hernández
Cali - Colombia

CMOS won't reset KT3 Ultra

The CMOS on my KT3 Ultra board will not reset. I've tried taking the battery out for over 48 hours and setting the JBAT1 to the 2-3 position. My CMOS settings will not reset.
I'm trying to reset them is because I can not get into the BIOS. When I hit delete, my screen says "Go->Setup" but it never goes into the BIOS. It continues to the MBFastTrak133 screen.
Please help me. Thanks in advance.

hi,
What keyboard are you using? I assume you never go into the BIOS, use a PS/2 keyboard instead, not USB keyboard first. YOu can use USB keyboard later after you managed to enter BIOS and to enable USB.
You can keep on hitting DEL key even at the MBFastTrak133 screen. It will still go into the BIOS after that RAID BIOS screen. Just wait for it to go off.

DirectX Problem KT3 Ultra + GForce ti 4600

Hello,
I am experiencing serious problems with DirectX (both the built in 8.1 and 9.0b) under XP professional on a computer with the following configuration:
MSI KT3 Ultra (MS6380E) Mainboard
MS StarForce GForce4 Ti 4600 Series graphics adapter (it says somthing like N1996 on the board itself near the ce logo, but any help for identifying the board is apprciated)
I tried every driver I could lay my hands on including older ones like 27.20k, 41.07xp and newer ones like 4345xp or 45.23 (directly from nvidia). Both system and VGA bios have been updated and I downloaded every patsch available from microsoft. I reinstalled my systm from scratch several times while trying ut different combinations. I solved a potential IRQ conflict (built in USB to PCI bridge and graphics adapter both on IRQ 16). I ran across some third party patch called via latency patch wich did not help noticably either. I tried experimenting with different settings for the refresh rates for the monitor an limitng the DirectX refresh rate to 75, 65 or 60 Hz to no avail.
Frankly, I am at a loss on how to proceed from here. I reeached a state in the configuation of the system where the problems are "only" the following:
dxdiag hangs sometimes during the 8.1 and 9.0 tests of direct 3D. Darc Age of Camelot experiences hangups, flickering objects, clutter and some artifacts as well as loss of connection to the server (although my internet connect is unafected) during play depending on how much I reduce the acceleration of the card. On the lowest level of acceleration (no direct 3D) I do not have graphic problems but everything runs so slow it's no use playing at all.
Please help!
Andreas

I did install the 4 in 1 driver early on in the process (must have forgotten to mention it in my post). Just to make sure that I did not miss it in the current installation I reinstalled it again. No major change.
It seems that the behavior is somewhat eratic. After reinstalling the driver the system (or rather the game) ran for a couple of minutes before it started to freeze again for a couple of seconds each time with increasing frequency of those freezes. Upon leaving the game I noticed again certain flickering objects wich definitely did not flicker when I started. In short the situation got worse with time.
Since I often tried a lot of things in a row (to no lasting effect) and I think I had the best results after starting afresh after thinking some time about it (with the system switched off) I am starting to wonder if I have a thermal problem or something similar.
So I did a few tests with the side panel open but I do not think the temperatur is really that high (it's "hand warm" inside).
Any further suggestions?
Andreas

Kt3-ultra big problem

i have just bought a kt3 mobo and am having some serious problems getting it to work properly.
the 1st problem is my cd burner or dvd will not install anything. if it is allowed to autorun it will stop giving various errors. and if i install by clicking setup.exe the same happens. also it sometimes restarts the computer.
i have plugged in an old cdrom which seems to work fine.
the 2nd problem is my broadband connection. i am using an alcatel usb modem and i cannot get it to connect to the computer.
i install all the drivers first then plug it in, it then says it found the modem and is installing it and completes with your hardware is now installed.
all that happens now is the lights on the modem looks like its going to work but then goes off then back on again.
this goes on for as long as its connected.
i am using :
windows xp
amd 1200 thunderbird
256 ram
400 watt power supply
kt3 ultra
ibm 80 g.b deskstar
i have also been swopping componants with my other computer and i know everything is working fine.
i hope someone can help because i have been trying for 10 days now to get everything running and i am pulling my hair out.
many thanks

Hi i have been having problems with my adsl cuting off and the modem lights paling up a reset will usually work to get it connected again. I am using an external sagem adsl modem and the power draw for it is 400ma, most other usb devices only draw between 2 - 10ma. This can cause the computer to hang and the modem to disconnect. To fix this buy a self powered usb hub that is capable of more than 500ma per port this will eliminate the problem. As for other power issues i have 3 cdroms 2 of which are writers i have a gforce 4 vido card network card and have had no advers affects from power other than the USB problem hope this helps
AMD 1600 (1400)
MSI 6380E
GForce 4 mx 440 128
2 X 256 pc2100
sony rewrite 52 speed cd writer
freecom 4X dvd +/- rewriter
3com 100mb network card
4 usb 2.0 ports
4 usb 1.0 ports
Sagem adsl usb modem
Creative labs soundblaster live soundcard

Kt3 ultra aru + xp2000+ cpu

system
kt3 ultra aru
xp2000+
g force mx 400
256 pc 2700
my cpu is only seen as an 1250 cpu when it should be a 2000+ ive tried changing the settings in the bios to 133
and the system will not load to windows the settings are on 12.5 x 100 ive also updated the bios but still no luck.........please help

You can have a look at my hardware below...
Chassis: Antec 1080B (300w PSU / 180w COMBINED)
Mainboard: MSI KT3 Ultra ARU
CPU: AMD Athlon XP 1800+
Display: ABIT Siluro GF4 Ti4200 AGP 4X
DVD/CD-RW Combo: HL-DT-ST RW/DVD GCC-4120B
Floppy: Panasonic 1.44MB
HD: Quantum Fireball Plus/AS 30.0GB UDMA 100
Keyboard: Microsoft Internet Keyboard Pro
Monitor: KDS Visual Sensations VS-190
Mouse: Microsoft USB Wheel Mouse Optical
NICs: 3Com 3C900B / DLink DFE-530TX
RAM: Micron DDR 266MHz (2x256MB DIMMs)
Sound: Avance AC'97 Audio
I'm having the same problem where my system becomes very unstable at higher bus speeds. However, I have ordered a new PSU today as a solution to this problem. Basically, CPUs and video cards are much more demanding and the more devices you have in your computer the more power you're going to need. I recommend purchasing the Enermax EG465P-VE (FCA) 450W ATX PS. It has a higher amperage rating and will most likely solve your problem.

KT3 Ultra (USB Ext CD-RW)

Similar Messages

Maybe you are looking for