KT3 Ultra2 (6380) Problems after BIOS upgrade

Recently upgrade bios to 5.7 to work with the 2800+ I just got. The flashing process seemed to work without any problems. Upon rebooting of the machine I got the error CMOS\GPNV Bad Checksum. If I choose f2 (load defaults and continue booting) the machine will boot. If I reboot I get nothing....not even video. I have to clear the CMOS to get it to post but I receive the same error message. Im thinking its a memory issue. I have a pc2700 512 module in there currently which has worked fine. I have fiddled with the memory settings w/ no success. What should these settings be in my bios? Also have a geforce 4 video card if that is of any help?
Any help would be greatly appreciated!!!!!
-Matt

oh anohter thing...
i got a two short beeps - pause and then another short beep for a mobo error code.
i find it very strange how if i clear the cmos settings...boot it...hit f2 to load defaults and continue it boots. however after that a cold boot or even a reboot the machine wont even post. I feel the answer lies in there somewheres.....
-Matt

Similar Messages

KT3 Ultra2 FSB speed after BIOS upgrade

I have just upgraded the BIOS on my KT3 Ultra2 mainboard. On the CPU Support page, it says my mainboard support CPUs with FSB @ 333 MHz with the newest BIOS, but in the manual it says that the FSB is @ 200/266 MHz. Did the BIOS upgrade increase the FSB so that the FSB now is @ 200/266/333 MHz?

it increased the options,you still have to set it after flashing though

X120e: Suspend problems after BIOS upgrade.

I have a ThinkPad X120e (0596RZ6), which had BIOS version 1.08, that I have upgraded to 1.16 (8FET32WW).
I used a CD-ROM to upgrade the BIOS (8fuj09uc.iso) and all went smoothly.
Now, whenever I try to suspend to RAM while running on battery, it visibly suspends, cannot resume, and drains the battery as quickly as it would while running normally.
It worked just fine with 1.08, and nothing has changed in the OS that could break it.

The problem persists after downleveling the BIOS to 1.11. Older versions do not seem to be available for download.
Please, for the love of God, if you release a BIOS upgrade without properly testing it, then state so clearly so that people do not waste their resources such on frustrating "upgrades."

Lil problem after bios upgrade/flashing

I have a K9N neo nvidia nforce 550 mainboard and found a new bios upgrade from the msi website using the express download. Ever since ive upgraded, right after startup i get a message in windows saying it found a new PCI device and that i need to install a driver for it, i have 3 pci devices installed rbefore upgrading bios (GPU, Soundcard and wlan card) and theyre all working right now, i have no idea what pci device my pc has found because there is absolutely nothing installed other than those 3. ???
Any feedback would be much appreciated, thank you

Quote from: Ithiot on 05-March-07, 01:40:20
OK so i installed one of the drivers from the express download function, it was realtec audio device driver (or something), i installed that. but sstill wierd since i dont have that in any pci slot, anyways, im not getting the popup asking me to install unknown device anymore.
(AMD away driver wouldnt install for some reason, had an error, so i think im gonna leave it at that for now, i dont want any more problems lol...)
re install chipset drivers, after that if still yellow devices left use program above to ID.

Overclocking problems after BIOS upgrade

I’ve currently a MSI 865PE Neo2 mainboard with an Intel Pentium 4 2,4 GHz/FSB 800, 400MHz DDR-SDRAM.. Current version of BIOS is 1.3 and I succeeded to overclock P4 up to 3,0 GHz.
To achieve such a benchmarking I did the following steps (at least this seams to be the fail safe procedure to achieve success in overclocking P.4 to 3,0 GHz):
Load Setup Default settings first, changed Frequency/Voltage control as follows:
Dynamic Overclocking:       Disabled
Performance Mode:          Slow
CPU Ration Selection:       Locked
DRAM Frequency:          Auto
Spread Spectrum:          Disabled
Adjust CPU Bus Clock (MHz):    250
DDR Clock(MHz)         500
Adjust AGP/PCI Clock(MHz)   66,66/33,33
CPU Vcore Adjust         No
   CPU Vcore         1,750
DDR Power voltage         2,50V
AGP Power voltage         1,50V
After reboot I get:
Dynamic Overclocking:       Disabled
Performance Mode:          Slow
CPU Ration Selection:       Locked
DRAM Frequency:          Auto
Spread Spectrum:          Disabled
Adjust CPU Bus Clock (MHz):    250
DDR Clock(MHz)         400
Adjust AGP/PCI Clock(MHz)   66,66/33,33
CPU Vcore Adjust         No
   CPU Vcore         1,750V
DDR Power voltage         2,50V
AGP Power voltage         1,50V
That is, the mainboard keeps the FSB at 250 MHz but changes DDR Clock to 400 MHz. Thus everything works fine (forcing DRAM Frequency setting from Auto to 400, simple doesn’t work. Don’t know why?).
After upgrading the BIOS from version 1,3 to 1,5 the mainboard never adjusts the DDR Clock to 400 MHz and always reset to default 2,4 GHz base CPU clock frequency.
To my despair, after many different settings I could ever be able to overclock P4 to 3,0 GHz !!
Could you anyone please help me?
Kind regards,

There is really no efect in increasing the RAM voltage, I’ve tried up to 2,75 Volts.
With BIOS after 1.3 I always get "DRAM timing is too tightly so reload timing..."
Nevertheless I flashed BIOS version 1.7. After many tries what I've discovered is that if I set DRAM Frequency to 333, system shows after reboot DDR Clock (MHz) = 400 !!!
So everything works fine, Pentium 4 running at 3,0 GHz with CPU Bus Clock(MHz) = 250. Maybe this is a bug !?!?
To be on the safe side I've changed DDR Power Voltage to 2,70V as you recommended.
Kind regards
Pedro

NB100 hotkeys problem after BIOS upgrade

Hello,
after i've updated the bios to version 1.60 some hotkeys, like brightness setting (fn+f9/f10) or the mute (fn+f6) are not working anymore when the operating system starts, they work instead before o.s. loads. I'm using Windows Vista atm. I've tried to reinstall it too but nothing changed.
I really hope to receive some help so thanks in advance ;)
Best Regards

I dont think its the BIOS. Ive run vista ultimate on mine since ive had it, the hotkeys have never, in my case, worked with Vista. Even if i load the Toshiba hotkey utility it refuses to start and wont run in compatibility mode either. I think its a sacrifice we have to put up with, unless Toshiba update the utility to support vista. Personally I doubt they will do this as the machine is shipped only to support Win XP.

Kt3 ultra2-6380 problem

sorry my bad english
I have a problems with integrated chips, sound, usb y modem
I instaled all new drivers,and do not work.
I have winxp, and the software recognized all hardware, but the periferic conected to usb port do not recognized like joystick(nostromo belkin n45, and generic card reader for compact flask card.).
I have not install the drivers for these.Not recognized like drivers for the periferic conected, but this are the correct.
Please help me

Hi Hector! Sorry pero tengo que contestarte en inglés.
Did you enable all the integrated peripherals in Setup ? Did you enable USB ports in Setup ? If you have done it, try to install them manually and give Windows XP the drivers. (I had to load the drivers for XP of my Digital Genius Joystick). About the card reader is internal or external? I had the same problem with an internal card reader. Did the installation by setup of the drivers, even got recognized as 4 different card reader but never get my Memory Stick readed, so returned it to the store.- Good Luck ! 8)

Help Please - X200 will not boot after Bios Upgrade - keeps asking for power on password

Hi there,
I am new to this forum and please let me say a big Thank You for your help in advance.
I am using a lenovo thinkpad x200 running windows vista with service pack 1.
The laptop has always been running fine and has never given me any issues. Unfortunately, all this came to an end yesterday when I ran the system assistant which did a round of updates and it prompted me to reflash my bios.
I did what was instructed and closed all open applications and after the laptop restarted, there was a noise from the harddisk (the sound was basically like what happens if the harddisk suddenly loses power). Then, all i got was a black screen, no harddisk acitvity with only the power cable LED and another LED (with the shape of a N tiled at 20 degrees) on.
I searched the forum and did what was suggested in this entry: http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/Blank-screen-after-Bios-Upgrade-on-X200/ta-p/29...
This is what I did so far"
I turned off the power, took out the backup battery and waited for about 30 minutes (repeated this step several times, also removing the harddisk) but to no avail.
I removed the RAM and tried booting and there was that characteristic beeping sound.
I replaced the RAM, redid the CMOS clearing, and now there is the Lenovo startup screen. However, there would be an error code 0271 (no date time) and 0251 (something about default configuration). Then, these disappear and all I am left with is the Bios Power On password prompt. Somehow no matter what I type nothing can be input into the field (and I did not create any password as far as I can remember).
I redid the clearing for the power on password by removing the backup battery as suggested at the bottom of this page http://support.lenovo.com/en_US/detail.page?LegacyDocID=migr-59377 but it is no use. Each time I restart, even if I press the blue Think Vantage button or F1 or F11, I still get the same 0271 and 0251 error messages and am left with the power on password prompt.
I am really desperate as I really like my lenovo x200 and there is important data on the laptop. I would appreciate any suggestions on how I can solve this. Its amazing how a simple update can turn into such a disaster. Now i know i should never upgrade or update my Bios (or at least proceed with extreme caution).
Anyone can provide some help to get my laptop workin again?
Thank you very much,
Mark

try reflashing your bios?
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-70348
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

DataSource problems after BW upgrade

DataSource problems after BW upgrade
Upgrade from
SAP NetWeaver 2004s: SAP_BW 700 0012 SAPKW70012
to
SAP EHP 1 for SAP NetWeaver 7.0: SAP_BW 701 0007 SAPKW70107
BW system: PI_BASIS 7.01 SP 6
ECC/source system: PI_BASIS 2005_1_700 SP 11
Problem exists throughout, both with generic and standard DataSources.
Here is one specific example:
Generic DataSource ZXXXXXXXX
InfoPackage "ZXXXXXXXX(ZXXXXXXXX)" does not run. Error:
DataSource ZXXXXXXXX(SOURCESYS) must be activated
Message no. RSDS179
Then followed these steps:
1. Replicate Metadata from source system
2. Report RSDS_DATASOURCE_ACTIVATE_ALL from SE38 for source system SOURCESYS and DataSource ZXXXXXXXX
Errors returned:
Inconsistent user object ZXXXXXXXX SOURCESYS for PSA /BIC/B000XXXX
Error saving DataSource ZXXXXXXXX SOURCESYS
DataSource ZXXXXXXXX (SOURCESYS) could not be activated
When I try to choose "Manage" from the context menu for the DataSource, I see an error:
Invalid DataStore object name /BIC/B000XXXX: Reason: No valid entry in table RSTS
Message no. RSM1294
The following notes have not helped:
https://service.sap.com/sap/support/notes/1377274
https://service.sap.com/sap/support/notes/1383711
https://service.sap.com/sap/support/notes/1489064
https://service.sap.com/sap/support/notes/1056060
And no other SDN threads seem to give fruitful suggestions.
Any ideas?

Hi,
Just to help the folks out here.
In my case,
Inspite of going through several valid NOTES & program, my issue didnt resolve (you reply was pretty accurate - but dint help me :-)).
I have resolved the issue by adjusting the PSA table for the same.
Procedure:
Take the psa name --> go to table rstsods --> find the ODSNAME_TECH name for the relevant psa --> se38 t.code --> enter ODSNAME_TECH and click on 'adjust & activate database table' (make sure you have selected 'save data' radio button.
Just in case anyone who come across this problem, can do the above steps.
Regards,
Dubbu.

I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

I was going to suggest - Settings>General>Reset>Reset all settings, but if you are restoring to factory settings, that should restore the settings back to factory defaults. But if you are restoring from a backup, after restoring to factory settings, try resetting all of the settings and see if that fixes it.
It might be something in your backup.

I have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

i have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

Check that your computer is compatible with Mountain Lion.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Mac mini (Early 2009 or newer) model number 3,1 or higher
Mac Pro (Early 2008 or newer) model number 3,1 or higher
Xserve (Early 2009) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again. You can make a bootable DVD/USB stick to install using this free program.
Bootable Drive DVD or USB Flash Drive – Lion Diskmaker
Our 2 computers haven't experienced any significant problems, even though others have. I find it much better than 10.7 Lion, which I used for a week before reverting to 10.6.8
Mavericks is supposed to be released this fall, so you may want to wait.

AGP 1.0 on MSI KT3 Ultra2 (6380)

Can I plug in old AGP 1.0 graphic card (ASUS V3400 TNT) into AGP slot on MSI KT3 Ultra2 (6380) motherboard?

look in agp slot in theory if its not right it should not fit
look at pictures here,notice notches
http://www.msi.com.tw/program/service/forum/index.php?threadid=8317&boardid=10&styleid=1
but as boards not got only use 1.5v warning like some others i think it will

KT3 Ultra2 mobo problem or others problems

My PC as below;
AMD Athlon XP 1500+ @ 1333 MHz (with box)
MSI KT3 Ultra2-R Ver 1.3 (Bios-Ver5.6)
256 MB Kingmax PC2700
Leadtek WinFast A170 SDR
Creative Sound Blaster Audigy DE Special Edition
40 GB Maxtor D540X Hard Disk Drive (5400RPM)
40*12*48 AOpen CDRW Drive
300 watt Enlight EN-8304946 (Model:HPC-300-101) PSU
+5V= 25A +5V;+ 3.3V=180W max
+3.3V =20A
+12V=13A = 156W
-5V=0.3A = 1.5W
-12V=0.8A = 9.6W
+5VSB =1.5A =7.5W
Blower Fan: 6 Fans (Using other cheap ATX PSU modify by myself)
P/S: no include CPU Fan ,VGA Fan ,Chipset Fan
Drivers & Software:-
Windows XP Pro + SP1
Nvidia 40.72 Driver
VIA 4.43
Power DVD XP
My problem like this; yesterday I playing Audio CD using Power DVD XP, then suddenly the application not respond , so I reset the computer . After booting ,the hard disk can not detect. So turn off the system without do any thing ,let rest 10 minutes & turn on, the hard disk can detect ,so go to windows again, try play cd again, but after this the system was not respond same like above problem .so reset the pc ,after booting the computer can not detect the hard disk again. So I turn off and until today in morning .I turn on my pc,after booting the hardisk can detect.but can’t go to window anymore, because all inside my hdd
was lose, my D Drive data also missing (I got 2 partition-1st partition-C Drive: OS+ Software; 2nd partition -D Drive :MP3 song +My document).But I go to FDISK ,can’t access drive.
This problem I not sure is hard disk problem or power supply problem or mainboard problem. But can’t be the power supply not enough power, because I just have 1 HDD , 1 CDRW Drive,1 Floppy, Mainboard with 1 chipset fan ,AMD Athlon XP1500+ c/w original fan ,VGA+VGA fan & sound card only. But my cousin using P4 2.4 GHz using cheaper & no name PSU with 300watt only and have more drive&may cards:1HDD(7200rpm)+HDD Fan,1CDRW Drive,1 DVD ROM ,1 Geforce2 display +FAN ,1 creative sound card, internal modem & network card. So I think the PSU is no problem and this PSU ,I have check from AMD site ,this PSU recommended by AMD and can support AMD Athlon XP 1500+ to 1700+ only.
But got one time, my pc have usb keyboard problem ,during system restart with press reset, after booting ,the pc can’t detect the keyboard ,and I have enable the legacy usb support , the problem I solve just change PS/2 keyboard only ,after this was working fine. look like same problem but how solve?????
But until today this problem happen .So I need to you help & your good suggestion &good way .please.
Thanks.

but the prices expensive or no. can u give me the model no ,please? but i think the my psu now i'm using is no problem & today i go back i need try POWERMAx to low level format my hdd, see how
But last time i have this psu problem (using pentium MMX with many blower fan with one PSU only),during booting,the HDD can't detect ,but now can detect HDD at booting,then system hang on windows,after restart can't detect HDD,very funny

!! Help !! MSI KT3 Ultra2 (MS-6380E) No BIOS Prompt!!

Hi Guys, this may be really elementary to you folks, but I want to change the boot order in bios, so that my Acronis True Image boot disc will be recognized, but when I start my machine, there is NO message about pressing ANYTHING to enter into bios. I've tried delete and esc anyway, to no avail, and I'm about to restart and try F2, but the screens flash past pretty quick, but not too quickly to see that there is NO prompt to enter BIOS at all..... is that expected, problematic??
Can I download a driver or something that will make the "press [ ] to enter setup" or "press [ ] to enter BIOS" prompt appear?
Failing that, is there anyway to force the system into BIOS without a prompt??
My motherboard is MSI KT3 Ultra2 (MS-6380E) and the chipset is VIA VT8367 Apollo KT333, if that helps. I believe that should be all you need to help me out, but tell me if you need anything else, since I have Everest and can probably tell you anything. In fact, I'll just paste all the info on the motherboard right here:
Field   Value
Motherboard Properties
Motherboard Name   MSI KT3 Ultra2 (MS-6380E)
Motherboard ID   62-0911-009999-00101111-040201-VIA_K7$1AARK204_A6380VMS V5.6 091102
Front Side Bus Properties
Real Clock   100 MHz (DDR)
Effective Clock   200 MHz
Bus Width   64-bit
Bus Type   DEC Alpha EV6
Bandwidth   1600 MB/s
Memory Bus Properties
Real Clock   133 MHz (DDR)
Effective Clock   267 MHz
DRAM:FSB Ratio   4:3
Bus Width   64-bit
Bus Type   DDR SDRAM
Bandwidth   [ TRIAL VERSION ] MB/s
Chipset Bus Properties
Real Clock   67 MHz (QDR)
Effective Clock   267 MHz
Bus Width   8-bit
Bus Type   VIA V-Link
Bandwidth   267 MB/s
Motherboard Physical Info
RAM Slots   3 DIMM
Motherboard Size   230 mm x 300 mm
Motherboard Chipset   KT333
Integrated Devices   Audio
Form Factor   ATX
Extra Features   [ TRIAL VERSION ]
Expansion Slots   [ TRIAL VERSION ]
CPU Sockets/Slots   1
Motherboard Manufacturer
Product Information   http://www.msi.com/index.php?func=prodpage1&maincat_no=1
Driver Update   http://driveragent.com?ref=59
Company Name   Micro-Star Int'l Co.,Ltd.
BIOS Upgrades   http://www.esupport.com/biosagent/index.cfm?refererid=40
BIOS Download   http://www.msi.com/index.php?func=downloadindex
ANY HELP you can give me would be GREATLY appreciated folks......
Please help!!

Quote from: Henry on 26-July-09, 10:31:42
Are you using a PS/2 or USB keyboard? If USB try a PS/2 KB. Have you tried rapidly pressing 'Delete' right after power on? By that I mean don't immediately hold it down but press & release multiple times.
Good tip about the ps/2 keyboard, not that I've tried it yet, but I will tomorrow after I get my hands on one, and I'll let you know. Thanks for the tip..... but I wonder, shouldn't it at least TELL me that there exists an option to go into BIOS? Even if it doesn't there must be some way in I guess, so I'll try this tomorrow. Thanks again.....

External USB keyboard does not work with T60 after BIOS upgrade

External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
It does the same with or without the docking station.
Anyone else bumped into this problem yet?
Has someone found any fixes for this?
t

Hi and welcome the forum!
Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

KT3 Ultra2 (6380) Problems after BIOS upgrade

Similar Messages

Maybe you are looking for