Kt3 ultra2 unstable in win98 se
i've been using this mobo for almost half a year now, and i noticed that it has become unstable under windows 98 se (my system is dual booted with win xp pro)
during xp sessions, i don't have problems... everything runs well but not in win 98 se.
does anyone here have an experience with kt3 ultra2 problems with win98 se?
by the way, all my drivers are the latest - from video card downto mobo chipsets
?(
is that so... ok...
the instability occurs only when i setup my pc as a dual os system (winxp pro and 98se)
if 98se is left alone in my system... its completely stable... :] but not good for gaming. :(
so it simply means that my mobo is not the culprit... did i get it right? ?(
Similar Messages
-
KT3 Ultra2-R new - running well 3000+ 512/PC3200
Well I've finally upgraded one of my machines from seriously poor to really quite good with this motherboard.
Wanted to upgrade the machine at minumum cost (other than processor) without throwing out quite a good (though old) AGPx2 graphics card. So I found a KT3 Ultra2-R on ebay. Had trouble finding a fast athlon to go on it. Even used no warrantee ones were selling for mad money on ebay-uk. Found a chap who could supply a new OEM XP3000+. Found the memory at ebuyer where it was cheaper than on ebay!
My existing PSU looked iffy for an athlon 3000+ so I found a good enermax one. A bit pricey but good. Its an older model so suitable for a 3.3 & 5v loading system such as this. Oddly there appear to have been two versions of the EG465P-VE. The older ones had 38/44/20 according to several places on the net, but this version has 35/35/35. It had me worried for a bit as I found the higher specs before I ordered it and the lower specs afterwards.
All running quite nicely.
Any recommendations to get the best performance out of it all. I may not want to madly overclock though as the old setup was notoriously unstable and I want this one to be rock solid.I've left the BIOS on auto mostly - so the memory should be doing 333 (PC2700) - but its got headroom if I want to try clocking it up a bit AND it was cheaper than the memory rated PC2700, and its slightly more future proof.
I'm still trying to check the bios version at the moment. It goes past too fast to read on the first bios screen. Live update seems unhappy with Mozilla as a browser? Can't get sense out of it yet.
All seems stable although the onboard sound has disappeared in the last 24 hours. It was working before. sigh. -
KT3 Ultra2-R ... Can't change FSB beyond 100
Dear all,
Just got my KT3 Ultra2-R with an Athlon XP2100, upgraded to 5.7 AMI BIOS, worked great, then made some changes to CMOS (forgot which ones), then couldn't boot.
When I finally booted and went to CMOS setup, it would not let me change the FSB to anything other than 100...that is, no options on the FSB when I hit enter (shrug).
Now, my system recognizes the CPU as an AMD XP 1500...blah. Tried everything...resetting CMOS with jumper, took out computer battery, replace 350 SmartBlue PSU with 400 Watt PSU, replaced Heatsink/cooler with better one, wiped contacts, nothing...it's not the temps, because my case idles at 29C chassis and 36C CPU temps. Even reflashed back to BIOS version 5.6, and still no go.
When I do "performance" settings in CMOS, it will give me 133 FSB, but my system will now be unstable. Weird thing was, before this "event", performance setting put it at 166 FSB :(
Anyway, my comp isn't dead....it just won't let me change the FSB. I called up ABS Computers where I bought this, and they said they are not responsible for damage caused from flashing BIOS...blah, whatever.
I just put out an order for an Asus A7N8X Deluxe motherboard and joined the NForce2 bandwagon, but if someone could give me some insight into what I could do about my motherboard, besides hang it on my wall, I'd certainly appreciate it.
Here are specs of my system:
MSI Kt3 Ultra2-R
Athlon XP2100
Geforce2 video card
soundblaster 5.1 Live
WD 120 Gig and WD 60 Gig
Liteon CRWD
Sony DRU-500AX
Q-Tech Quiet PSU 400 Watts
Nexus Heatsink/Fan
Windows XP HomeThanks for the reply, but while checking out the other problem with the KT4V / Athlon 2400 Clock Speed Problem (above) who couldn't set his FSB beyond 100, but when he set it the multiplier to 12.5/13, he gets a 20X multiplier when he goes into Fuzzy Logic.
Well, guess what, I did the same thing (set my CPU multiplier in BIOS to 12.5/13, and lo and behold, I go into fuzzy logic, and my AMD XP 2100 is recognized as an AMD XP2600 running at 2000 megahertz...now someone explain that to me! I even check with SiSandra, and yup, it's seeing a 2000 megahertz processor. I even ran the benchmark tests on SiSandra, and it's on par with that processor.
However, my FSB is only 100, and thus, my memory benchmarks are about 25% below the norm for my DDR333 RAM chips (i guess because they are synchronized with the FSB, and probably running at 200 then).
Anyhoo, i'm tired of trouble shooting and figuring out what the hell is going on. The comp is extremely stable at 2000 megahertz at 100 FSB...don't know what else to do...so installing new motherboard tomorrow and report back later. -
Mobile 2500 overclocking problems with KT3 Ultra2
First off sorry for my poor english.. it's not my first language. Now here's my system:
CPU: Mobile 2500
HSF: Vantec Aeroflow with AS5
MB: MSI KT3 Ultra2
RAM: 2x512MB PC2700
VIDEO: Leadtek GeForce 4 TI4200
The temperature is about 43C cpu and 40C case when the system is idle and it can get to 50C cpu and 43C case when the system is on maximum use.
So here's the situation... I adjust the bus speed from 133 to 166 mhz.. I put the vcore voltage at 1.675 which is the maximum I can choose in the bios.. The multiplier is stuck on 14x.. When I try to run Prime95 or 3dmark03 my system is very unstable.. In prime95, one time it stopped after 10 minutes, the other time after 40 minutes. In 3dmark03, I tried it at least five times and it usually stops during the second run of the tests.
I'm very disappointed because I read a lot about this cpu before buying it and everyone was overclocking it easily so I had no doubt it would get to 166 mhz especially with proper cooling.. It sucks pretty bad!
I hope some of you have some advices or suggestions on what I could try to make it work.. You are my last hope! Thanks in advance!!Here comes another update... Keep in mind that my cpu is currently at 14x166=2337 mhz. I did some benchmark today and the results are starting to give me hope.. first I ran Prime95 for 14 hours without errors on the custom test with 2048-4096. During this testing, the voltage went like this: 3.3V = 3.22V , 5V = 4.95V , 12V = 12.28V. Is it normal? Does it mean my power supply is good enough? The specifications of the Power supply are : 3.3V-20A , 5V-30A , 12V-15A. After that I ran all 3dmark03 tests three times without any glitches.. Then I played Far cry for about 20-30 minutes without any problems either.
Now what I'm wondering is if I run Prime95 without any problems but that 3dmark03 works sometimes and fail sometimes, can it help you guys to tell me what could be causing the instability?
Thank you again for all your help! -
USB 2.0 Issues with KT3 Ultra2 6380E
Windows XP SP1
Bios: American Megatrends Inc. 07.00T
Hi I was wondering if someone could help me?
My machine has six USB ports. (1&2) Two ports are
installed on the motherboard, and my users guide says
they are legacy ports. (3&4) two ports are installed
on the d-bracket 2 connector: JLED, connected to
JUSB2, these are what I believe to be my only 2 USB2.0
ports. (4&6)Finally 2 ports are connected via JUSB3 to
the front panel of my Antec case. I think the front
panel of my case has 1.1 connectors so it is
essentially a 1.1 port.
I am having some difficulty getting my USB ports to
function properly with a USB 2.0 Buslink hard drive
UII-40 72E. I suspect there is some IRQ conflict.
Trying to alleviate this I disabled all the device
drivers I suspected might cause this in the device
manager in safe mode. I then removed from the device
manager all the USB (2.0 and 1.1) root hubs, and after
that their host controllers. I then booted to VGA
mode (thinking this should disable the video card
drivers??) and exported this IRQ info from my sys info
after the USB host controllers are reinstalled:
Resource Device Status
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 11 RADEON 8500 SERIES OK
IRQ 21 VIA Rev 5 or later USB Universal Host
Controller OK
IRQ 21 VIA Rev 5 or later USB Universal Host
Controller OK
IRQ 21 VIA Rev 5 or later USB Universal Host
Controller OK
IRQ 21 Standard Enhanced PCI to USB Host Controller OK
IRQ 0 System timer OK
IRQ 8 System CMOS/real time clock OK
IRQ 13 Numeric data processor OK
IRQ 12 PS/2 Compatible Mouse OK
IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2
Keyboard OK
IRQ 14 Primary IDE Channel OK
IRQ 15 Secondary IDE Channel OK
IRQ 6 Standard floppy disk controller OK
Next I attempt to (already plugged into D-Bracket
port) power on my buslink USB 2.0 hard drive. As soon
as I do the machine immediately goes to a blue screen.
No messages given but numbers are shown. I have screen
shots taking with my digital camera. I then returned
to safe mode, remove the USB drivers as I did before,
and boot to VGA mode. Once the USB drivers have been
restored I attempt to power on the bus link hard drive
this time plugged into the onboard legacy ports. I
can I get another blue screen this time including a
message "IRQL not less or equal", again I have taken
screen shots with my digital camera.I then returned to
safe mode, remove the USB drivers as I did before, and
boot to VGA mode. Once the USB drivers have been
restored I attempt to power on the bus link hard drive
this time plugged into the front panel USB ports
(4&6). When I power it on Windows XP warns me that I
have a high-speed USB device plugged into a non
high-speed USB hub. But I receive no error messages.
However I do not exceed the drive through "my
computer". I go through the add hardware wizard to try
and at the drive manually and it says the device is
working properly. Still I do not see the drive.
Finally I tried installing a Buslink USB 2.0 PCI card
after the above steps. I then returned to safe mode,
remove the USB drivers as I did before, and boot to
VGA mode. Once the USB drivers have been restored I
attempt to power on the bus link hard drive this time
plugged into the PCI card. The drive seems to be
recognized automatically by Windows XP however my
system slows to a crawl trying to access any hard
drive. When I try and access the USB 2.0 hard drive I
get a message something to the effect of "(the drive
letter) not being recognizable".
Any ideas on what could be causing this? The same
Buslink hard drive works great at work on my Windows
2000 machine plugged into the same PCI card using the same USB cable and power supply. Would any other information be useful?
Thanks!
andrew
System Info:
ANTEC PERFORMANCE II Model# SX630II (BEIGE) ATX MINI TOWER CASE w/ 300W POWER SUPPLY - RETAIL Special features include the Smart Power ATX12V P4 compliant power supply that runs cooler and quieter, front USB/Firewire ports, washable air filter on the front, & quick-release drive bays with release lever. Specifications: Material: 1.0mm SECC Drive Bays: External 3 X 5.25" - 2 X 3.5" Internal 3 X 3.5" System Board: Fits standard ATX / Pentium 4 Up to 12" (W) x 9.6" (L) Expansion Slot: 7 Slots USB/IO: 2 Front USB port, 1 Front IEEE 1394 (Firewire) port Standard Fan(s): 1 X 80mm (rear) Optional Fan(s): 2 X 80mm (front) Dimensions: 18.6" (L) X 8.1" (W) X 17.25" (H) $80.00 1 $80.00
MSI Motherboard for AMD Processors Model KT3 Ultra2(6380E-050) Retail Specifications: Supported CPU: A (Socket 462) for AMD® Athlon XP/ Athlon/Duron Chipset: KT333+VT8235 FSB: 100/133 MHz RAM: 3x DDR DDR266/333 184-pin Max 3GB IDE: 2x Ultra DMA133/100/66/33 Up to 4 Devices Slots: 5x PCI (32-bit) ,1x AGP(AGP 2.0 1x/2x/4x ) Ports: 1x FDD, 2x COM, 1x LPT, Onboard Audio: ALC650 Audio (This board doesnt include the S-Bracket) $82.00 1 $82.00
AMD Athlon 1700+/266 FSB XP Processor CPU- OEM Athlon XP 1700+/ 1.47GHz , AX1700DMT3C The AMD Athlon XP processor with QuantiSpeed architecture powers the next generation in computing platforms, delivering extra performance for cutting-edge applications and an extraordinary computing experience. Specifications: CPU: 1.47 GHz Type: 1700 XP Cache: 256K BUS: 266MHz Socket A (PGA) OEM (Processor Only) $66.00 1 $66.00
CRUCIAL MICRON 512MB 64x72 PC 2700 DDR RAM - OEM 184-Pin, CL=2.5-Unbuffered Non Parity 2.5V, CT6464Z335 Requires DDR supported Motherboard - Lifetime Warranty. OEM $176.00 1 $176.00
WD WESTERN DIGITAL EIDE HARD DRIVE 40GB 7200RPM MODEL # WD400BB -CAVIAR OEM, DRIVE ONLY Specifications: Size: 40 Gigabytes Interface: IDE ULTRA ATA100 Seek time: 8.9ms RPM:7200 Cache 2MB OEM(Drive alone) 1 Year Manufacturer Warranty --* Works With PC & Mac *-- $80.00 1 $80.00
Linksys EtherFast 10/100 LAN Card Model LNE100TX : Version 5.1 - RETAIL Easy to Use Plug-and-Play 10/100 PCI Network Card. Full Duplex Capability at Up To 200Mbps. Connects to Both 10Mbps Ethernet and 100Mbps Fast Ethernet Networks. Power On Your PC From Anywhere on the Network with Wake-On-LAN Management. $24.00 1 $24.00
ATI RADEON 8500LE 128MB DDR TV out, NO DVI,BULK Powered by the revolutionary RADEON™ 8500 LE world’s fastest and most advanced graphics processing unit (GPU) Features ATI's TRUFORM, SMARTSHADER SMOOTHVISION, and HYPER Z II technologies
GPU: RADEON 8500 LE
Specifications:
Memory 128MB of double data rate memory
Resolutions: 640-480 200Hz to 2048x1536 at 85Hz
Connections:CRT Monitor: 15-pin VGA connector TV and VCR: s-video connector
DirectX® 8.1 support OpenGL® 1.3
Operating systems support: Windows® 98/98SE Windows® Me Windows® 2000 Windows® XP Model#: RADEON 8500le 128M –I first tried installing the VIA4in1 and VIA USB2.0 patch. Then I tried the D-bracket after refreshing the usb drivers (I did not disable all other devices like in my original post, should I have?). Same result, blue screen crash at power on.
Next I disable USB ports in BIOS and install USB PCI card. Then power on the USB HD plugged into card. Same result. Computer slow accessing local drives. When I try to access the USB drive I get a "E:/ is not accessible; the file or data is corrupted or unreadable."
Next I remove the USB card. I enter BIOS and set to "2" ports. Presumably this turns on the USB1.1 ports on the mobo. I return to windows xp. It now seems to install the drivers, but just as it finishes I get a "a problem has been encountered instaaling this device (it has done this before but after finishing I get the blue screen most times). Next I goto the device manager, and in my USB devices I have a USB mass storage device w/ a yellow flag. I goto properties and see a:
"the device cannot start (code 10)" device status. I click "troubleshoot" and voila... blue screen.
Finally I reboot, and set 4 ports in BIOS, making my JUSB3 FRONT PANEL usb1.1? ports active. Interestingly these respond like the PCI card. Computer slow accessing local drives. When I try to access the USB drive I get a "E:/ is not accessible; the file or data is corrupted or unreadable." As soon as I power off the USB HD things are normal...
I will take this USB HD to work tomorrow just to ensure its integrity. Any other ideas? What kinds of BIOS settings might F up USB?
Andrew -
Problems w/ KT3 Ultra2 w/R
I think the best thing to do it's to explain the problem from the beginning.
A couple of months ago I bought my computer by components and put it togheter myself. Everything was fine, but there was a problem. Back then, my mobo was an ABIT KX7333R and it wouldn't boot if I changed the processor speed in the bios (it booted allright with the defalut -XP 1500- but when changed it to the real one -XP 2000- it didn't boot at all). So I used it for about 3 weeks with the default setting (I was too lazy at that moment to change the damn thing) and one night, the computer died while I was using it. Anyway, I assumed twas the mobo, so I requested a RMA from Abit, and had my motherboard replaced. The replacement worked fine for about 10 minutes, and when I was writing an email, puff, died again. At that time I was swearing and cursing, and blamed Abit. By then, I was tired of waiting and everything (just got stressed) so I ordered an MSI KT3 Ultra2 with raid. When I first booted the PC, the motherboard didn't recognized my HDD when I entered the Bios. I tried restarting, but the pc would not respond. So I checked the D-Bracket lights and they say that the problem was in the IDE controller or device. So I replaced my HDD with another one, but nothing happened.
So, my questions are:
1- Am I the guy with the worst luck in the world and got three defective motherboards in a row?
2- Could it be that something else in my PC is causing the problem?
If you have any questions, please post it here and I'll answer them. Here it's my computer components:
Athlon XP 2000
MSI KT3 Ultra2
Gainward GF4 TI4200
SB Audigy Gamer
3COM Ethernet card
Corsair XMS PC2700 512MB (Silver heatspreader)
Turbolink 420W PS
Lite-On CDRW
PS: Sorry for the length...Have you tried with another CPU ? If not, please do so ; or return the CPU for RMA.
-
Lack of Ghz KT3 Ultra2 Barton 3000+
Dont want to sound like a broken record but I aswell am having problems with my newly purchased Barton 3000+ (400 fsb) with my MSI KT3 Ultra2. The problem is that whenever I try to set the FSB to the correct level, the computer fails to boot and I have to jump the cmos. I updated my bios to ver 5.7, and the highest i can get is to a 2400+
Two possible reasons I think are I have a Thermaltake Volcano 8 (which i believe isnt up to par) and my powersupply is a bit below the specs in the troubleshooting faq: L&C brand PSU +3.3V/24A +5V/35A +12V/12A. However I'm reluctant to go buy replacement parts because I've read of the people who did and it didnt help (limited budget.)
I've tried flashing with 3 different versions of 5.7 drivers, and even gave the 5.6 a go (highest i could get was 2200+) The highest I could get the FSB is to 199, but as soon as i try for 200 it zonks out on me. I've got 768 megs of no name ram that has served me well, and so thats not the problem... (hope not) I've also read a buncho topics and tried various things from them.
If I missed anything lemme know....
Oh while I'm here, my computer likes to restart itself whenever I tell it to shutdown. Sometimes it does stay off, usually when not running for very long. On occasion (not very often) It will come on on its own accord, which kinda concerns meI don't know for sure, but aren't there two different types of Barton's being sold. One with a FSB 333 and one with 400 ?
So I think you will have to get the other type in order to get it working, since the mobo does only support FSB up to 333 MHz.
Maybe you can just replace the CPU where you bought it ?
Iscaran -
BIOS Settings Problem on KT3 Ultra2 MS-6380E with Barton 3000+(FSB333)
Well, I finally got my Barton 3000+ with 333 MHz FSB and installed it yesterday in my MSI KT3 Ultra2 Mainboard....
System Before changing anything:
PSU: DTK 400 W
+3.3 V / 22 A
+5 V / 35 A
+12 V / 15 A
-5 V / 0.5 A
-12 V / 0.8 A
+5 V VSB / 3 A
So that should make up 400 W as far as I know, my total System drain should be around 300-350 W so even if it would not suffice 400 W it should run the system ?
Mainboard: KT3 Ultra 2 (BIOS v5.7)
CPU: AMD XP 2100 FSB 133 MHz
RAM: 1.536 MB, 3x512 MB Infineon PC3200 (400MHz) CL 3-3-3-8 @400MHz, Cl2.5-3-3-7@333Mhz, 2-2-2-6@266MHz
VGA: MSI RX-9800 Pro 128 MB
DVD/CD-R/RW-Combo: Plextor PX-708 (Firmware 1.08)
CD-R/RW: TEAC CD-W540E (Firmware 1.0K)
Storage: Western Digital WD800BB (80 GB) (Firmware 17.07W17)
USB-Storage: Maxtor 4 K080 H4 (80 GB)
Monitor: Samsung Syncmaster 172T with Driver Version 1.0
Printer: HP Deskjet 970Cxi with Original HP Driver Version 4.3
OS: Windows 2000 Professional with Service Pack 4
BIOS Settings: SDRAM 1T Command: "Disabled" It won't work stable with 3 RAM's in it with that setting, but that I did know before.
CPU Fast Command: "Ultra"
System was running stable for nearly 2 years with this Configuration:
So now it goes:
First I changed the CPU form my old AMD XP 2100+ to the new Barton 3000 + with its new Arctic Cool Copper Silent 2TC.
Then I went into BIOS and raised the FSB to 166 MHz, which should be the correct one, or do I have to put 167 MHz in there (since 166.666666 MHz is rounded to 167)?
Then I exited and watched the restart...but it didn't start-up it only got me 3 long beeps at the HOST.
After some whining and beating I plugged out anything and cleared CMOS and started the whole thing again:
System after Clearing CMOS:
Mainboard: KT3 Ultra 2 (BIOS v5.7)
CPU: AMD XP 3000+ FSB 100 MHz
RAM: 1x512 MB Infineon PC3200 CL 2-3-3-7 (BIOS setting CAS Latency by "SPD")
Storage: Western Digital WD800BB (80 GB) (Firmware 17.07W17)
Monitor: Samsung Syncmaster 172T with Driver Version 1.0
OS: Windows 2000 Professional with Service Pack 4
With all Default settings, the Computer boots up, and is correctly Recognized as a Barton 1300 MHz.
When increasing FSB to 133 MHz it is correctly displayed as a Barton 2200+
NOW...
...after adding one BIOS setting after another I narrowed the problem down to the "CPU Fast Command (decode)" Function...if set to Ultra it does not boot-up when running 166 MHz FSB, it does not even let me into BIOS. I have to clear CMOS and restart from scratch again...
Is this normal and expectable with a Barton 3000+ running at the native 166 MHz FSB or not ?
Since my system before was running on "Ultra" with my old AMD XP 2100+.
There is only one more thing I noticed, the CPU V-Core is shown to be only 1.616 V (setting on "Auto" but it should be 1.65 V ? Should I increase the V-Core to 1.675 V in order to get closer to 1.65 V or shouldn't I worry about ?
Thanks for any Input you can give me on the problem.
IscaranIscaran, you are indeed correct in the statement which you made
Quote
...after adding one BIOS setting after another I narrowed the problem down to the "CPU Fast Command (decode)" Function...if set to Ultra it does not boot-up when running 166 MHz FSB, it does not even let me into BIOS. I have to clear CMOS and restart from scratch again...
This setting can be set to fast/ultra on the KT3 Ultra2 when using PC2100 ram running at 266. However, when using PC2700 ram running at 333, this setting MUST be set to normal for the satisfactory operation of the board. I know that you have PC3200 ram actually installed but it is only running at 333.
Quote
Is this normal and expectable with a Barton 3000+ running at the native 166 MHz FSB or not ?
Yes, absolutely normal
Quote
There is only one more thing I noticed, the CPU V-Core is shown to be only 1.616 V (setting on "Auto" but it should be 1.65 V ? Should I increase the V-Core to 1.675 V in order to get closer to 1.65 V or shouldn't I worry about ?
How are you measuring this ie Bios or o/s utility? Not unknown that these are incorrect. However, if you feel unhappy about this, try setting the V-core manually to 1.65v and check what this gives.
Quote
So 3.3 V x 22 A gives 72.6 W, that could be really a little cutting the edge. Could that cause the board to not respond when setting the "CPU Fast Command" to "Ultra" ?
Getting a more powerful psu will not likely cure this well documented problem.
However, this board mostly draws power from the 3.3 & 5v rails. The 12v is mostly used to power HDD, optical and fans. When you consider that 128Mb of ram draws about 8-10w from the 5v rail and you have a total of 1.5Gb that adds up to 96-120W of juice just for the memory alone. This board will beep at you at o/s level when it's running underpowered but my opinion is the same as osnavi's your 3.3v & 5v rails are too low. Also what is combined 3.3v & 5v wattage. What kind of reading do you get on monitoring utilities.
By the way I have as you can see from my dets below the same board and cpu as you and when I changed from a XP2000 Palomino with PC2100 ram to XP3000 Barton and PC3200, I changed the 'Fast Command' setting from 'Fast' to 'Normal'
Hope this helps, enjoy the board -
Can't install a modem on my KT3 Ultra2
I have just built a system with a kt3 ultra2 mobo and I have tried to install several modems and none will install. windows recognizes the modem on startup but says there is no modem installed when it looks for a modem.any help would greatly appreciated.
usb modem ? seriall modem ? os ?
-
KT3 Ultra2 won't run XP 2500 at more than 151 Mhz
Not an unusual topic I know but I haven't found any solutions in this forum as yet!
With my XP 2000 cpu installed my system is stable when the FSB is overclocked to 150 Mhz. When I install the XP 2500 cpu and set the FSB in the BIOS (latest vertsion) to 166 Mhz it won't access the hard drives at all. My initial thought was the psu so I reduced the system to 1 hdd, 1 DVD rewriter, 256Mb memory and tried again. No change! Then I started reducing the FSB until at 151 Mhz it would boot but as an XP 1900 cpu. The VIA chipset drivers are up to date.
I' don't know what to try next. Any ideas?I can only say, I'm running my KT3 Ultra2 with XP 2800+ without any problem at 333 Mhz. Remember you have to upgrade Bios with ver 5.7 so Mobo can work with a 166 FSB. Also, better try starting with only one memory module. You can take a look at my P.S. specs. on my sig. It's not too good, but enough for this rig. So, don't dispose yet your 2500+, try and tell us how did it go.
A bit off: Do you like this Forum ? If yes, Read the post on first page in this Forum " Forum Team on Strike...". If you want this Forum to stay as it is now, please send a mail to MSI. Adress is mentioned in first post. -
KT3 Ultra2 hangs during POST - Memory Detection
System specs:
KT3 Ultra2
Athlon XP 1900+
GeForce4 Ti4200
PC2700 512MB RAM non-ECC
***Nothing else connected***
The system only passes POST after clearing CMOS. When I load the default BIOS settings, the system hangs when it gets to the Memory Detection step of POST. I have tried different memory sticks and even motherboards with the same results. This seems to be a BIOS settings issue. Any Ideas???I have tried 2. Mushkin (Samsung chips) with a heat sink. The other was oem and the chips are also Samsung. Same problem with both.
The Mushkin works fine in another system. -
KT3-Ultra2-CE not shutting down!
I have a fresh install of WinXP(no service pks or updates). when I go to shutdown, the pc just restarts! I reformatted the HD, updated the bios to ver. 5.7. Reinstalled the WinXP and it still does the same thing!!
KT3 Ultra2-CE
AMD Athlon XP2400+
DDR pc2100 256 MB non-ECC ram
Asus 32MB video
Intel pro 100+ nicThanks all!
found the answer on the Forum after much search.
fix: disable all in the Wake on LAN settings in the BIOS.
Why is there so much problems with MSI motherboards? I've never had any problems with Asus, Gigabyte or Intel MB? While searching for my answer I see lots of problems with MSI mb. Makes me not want to buy any MSI products. ?( -
Help! I have an MSI KT3 Ultra2-C, part no. MS-6593, running WinXP Home. According to the manual it has six USB 2.0 ports, but I can't get a USB 2.0 external hard drive working at USB 2.0 speed. The drive is currently connected using the "D-Bracket 2" which the manual says supports USB 2.0. In my BIOS all USB ports are set to enabled.
The drive was detected by Windows XP, but when it installed I got a warning that it is not connected to a full speed USB port. The drive is only transferring about one megabyte per second of data, which I'm guessing means it's running at USB 1.1. When I use Sisoft Sandra to look at my port information, it lists "Standard Enhanced PCI to USB Host Controller" and then three listings for "Via Rev 5 or Later USB Universal Host Controller". All of my USB devices including the new drive are shown mapped to the "Via Rev 5 or later USB Universal Host Controller" so the "Standard Enhanced PCI to USB Controller" shows no devices connected. Even though all my USB ports are physically filled, they are all mapping to the "Via Rev 5" controller, which I think is a USB 1.1 controller. This makes me think if I can somehow force these devices onto the Standard Enhanced PCI to USB Host Controller, they will work at USB 2.0 speed? How can I make devices use the right USB 2.0 controller instead of the Via USB 1.1 Controller?
Windows Device Manager looks kind of strange, under USB Controllers it first lists the "Standard Enhanced PCI to USB Host Controller". Then it lists my USB cable modem, USB printer, and USB hard drive on the following lines. Then it has several lines that say "USB Root Hub". Then it has three lines that say "Via Rev 5 or later USB Universal Host Controller".
Please help me get this external hard drive running at full speed...I'm stumped and thought this USB stuff was all plug and play, and expected my USB 2.0 drive to work on this USB 2.0 motherboard. Thanks for any responses.Go Here: http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=357&kind=1 and download the Drivers and the Update. Then go into your device manager and click on the host controller of the USB devices and update driver, then select the drivers that you downloaded and restart your computer. once restarted go back into device manager and make sure that what was once "standard host" controller now shows "Enhanced USB 2.0" controller. Hope that helps.
-
I have already read Bas' post about the common problems but still, my own problem can't be solved. I hope you guys could help me. Here's the problem:
Specs: KT3 Ultra2 BR/2 x Kingmax 256 MB DDR333 RAM/AthlonXP 2000+
I know that the default fsb is 100. The system reaches POST at 100 fsb. Now, if I use that fsb, my athlon xp is almost worthless. Everytime I try to set the fsb at 133 and saves the CMOS setup, the system couldn't even initialize the VGA card and won't even reach POST. The LEDs tell me that the problems are with the memory modules. I hope you people can help me because I can't use my system until this is solved. Thank you and more power to you.Quote
Originally posted by larryj
I bought a stick from auib which I will never do again said it was 2700 turned out ot be 2100 which is prob why it come with a free heatsink caused all kinds of probs for me so I ordered Crucial ram & all is well. http://www.crucial.com if you have another ddr system try it in there but it prob is bad ram.
Could you prove it was 2100? If so, I would have taken it back and shoved it up........ Sorry, got carried away. I would have dobbed the retailer in to the authorities for misrepresentation or fraud. -
Working KT3-Ultra2 System suddenly will not post!
Problem: After working fine for two weeks, my new system with a KT3 Ultra 2 mobo does not boot or POST. After pressing the power button, the power light comes on, the hard disk spins up, and then nothing else happens. The D-Bracket LEDs are in the RRGG layout, indicating that it is initializing the drive controller, but I suspect it is not getting that far as the lights come on in this state as soon as the system is powered.
This system was working fine for two weeks before this happened. It has NEVER been overclocked. I have tried reseating the hard disk connectors and all the AGP/PCI cards, as well as clearing the CMOS . My system configuration is:
Ducted case for effective cooling with a 350 Watt Power Supply
KT3 Ultra2 Motherboard
AMD Athlon XP 2000 CPU with AMD heatsink/fan
1024 MB of PC 2700 RAM (2x512)
ATI Radeon 9700 Pro AGP video adapter
Netgear PCI Ethernet Adapter
Windows XP Professional
I have no idea where to go from here, anyone with ideas please help!!!
-james puckettQuote
Originally posted by maesus
You have to clear the CMOS, and 100% make sure it's really cleared. ie, removing battery, discharge all capacitors on the board (with power off and power cord attached for 5 minutes), unplug power cord, set the CMOS jumper to reset for couple of minutes... etc
Yes, I have done all of that.
Maybe you are looking for
-
Problem in crystal report API....
Post Author: Pugalendran P CA Forum: Crystal Reports Hi I am migrating a report from version 8.5 to 11. The Report is having only one Parameter Field named as JOBID. I am using the API, PEGetNParameterFields to return the number of para
-
Nokia lukia 730 restards on its own
Hi, Ive had my Nokia Lumia 730 for a few weeks now and it is very unreliable causing me to be late for work on a number of occasions ... I set my alarm and it doesn't ring as my phone has rebooted all on its own with 70% battery :/ .. The other day i
-
Data element: INDX_CLUST
Hi All, We are using dataelement INDX_CLUST(Data Type LRAW) in custom table for storing internal table data using following export statement. export t_cn_hdr t_cn_itm t_cn_prnr t_cn_shipto
-
Acrobat Reader Redistribute wrong version
Hi all, I registered for redistribute Acrobat Reader in our network. Adobe sent me the link to download the file. Unzip the file which has Setup.exe, AcroRead.msi and other files. If I manually install it by double click on Setup.exe file, I got t
-
Inconsistency problem with Image preview using ImageServlet -JSP
I have a Servlet that reads Images ( JPG) from file system and sends bites to response, Code works fine and I can see the Image, Problem is that it is very Inconsistent sometimes I can see image and sometimes I see the red X mark instead of image, if