KT333 Ultra-ARU + XP 2400+ ...

is there a prob with this combination? if i update my bios to the latest version (w/c supports up to 2600+) will it recognize the processor properly even if its T-core revision B?

I am having the exact same problem. Here is what I have posted over at AMDMBforums:
When I put the cpu in unlocked and boot up it is not recognized properly. When I go to change the setting from Auto in the bios - ie fsb from 100 to 133, etc the system will not boot and I have to clear the CMOS in order to get it to boot.
My understanding is that the 2400+ is 15x133 = 1.995Ghz by default. That being said the bios should see the 2400+ and recognize it correctly based on the systemboard specs from MSI.
When I could not get the CPU to boot correctly I unlocked it using the GAO wire/pin method. When I went into the bios and tried to bump up the multiplier up to 15x133 for 2Ghz the system rebooted and only had a 5X multiplier despite what the bios said at 15X.
I read through this thread and it confused me somewhat. If there is no 15x multiplier, how does the 2400+ get it's default speed? MSI cleared this cpu for the K3T so in theory it SHOULD have the 15X multiplier. What confused me though was how the system operated with the cpu locked. Can anyone explain this to me?"
Another reply I posted:
"If I put it in the KT3 should see it as 15x133 = 2Ghz as default and recognize it as 2400+ on boot, but it does not.
Herin lies the problem. If I remove the wire to open the bridge to lock the multiplier, the cpu is not seen correctly in the bios (ie only shows as an 1800+ cpu!) and any attempt to adjust the fsb from 100 results in the system not booting such as in your case. I am forced to clear cmos in order to get it to boot. I also noted that with the cpu locked (default), when I went into the bios and attempted to adjust the cpu voltage from default of auto it gave me strange ASCII characters for all the other voltages!
Bottom line-- MSI states that the CPU should work on this board without any mods to the cpu (ie unlocking it). My problem is that the ONLY way I can get the board to see it as a 2400+ is to unlock it and run it at 12x166. Right now with it running at 12.5x176 it is seen as a 2600.
Why does the cpu NOT work out of the box using default CMOS settings as MSI stated and why am I forced to unlock it to get it to work?"
It appears that many people are having this problem!!

Similar Messages

Barton 2500+ in KT333 Ultra ARU w/ 9800xt help me

here are my specs,
AMD Athlon XP 2500+ Barton @ 12.5 x 175Mhz (green chip from early june03)
MSI KT333 Ultra ARU
512Mb x 1 Corsair XMS PC2700
Ati 9800xt w/ 3.10 Catalyst
SB Audigy MP3 w/ latest driver
Antec smart power 350WMax,(i think constant is
I only get 16000 marks in 3dmark 2001se. AAandAF are application select. ive read how people with slightly lesser ati boards are getting 20k marks. what is the bottleneck in my system? I cannot run a 10 x 200Mhz on my barton, it won't POST. Is it my power supply or is it my ram?both? do i need 512x2 ddr400 to overclock more? I got it to boot w/ error at 12.5x185, but that doesn't help at all. how can I get my 3dmark score up?

I cannot run a 10 x 200Mhz on my barton, it won't POST
it never will as board has only 1/5 divider so agp would be 80 and pci 40

Mainboard does not work anymore (kt333 Ultra Aru)

I have a KT333 Ultra motherboard I purchased along with an AMD XP 2000+ chip and had 256 MB ( PC2100)memory and Cyber-cooler CPU cooler, ATI Rage Pro Turbo, Kingston 10/100 ethernet, Enermax 350 watt PSU, and TI firewire card. and I came home after a late night of work and turned my PC on only to get 3 long beeps and no screen messages or anything, this happened this saturday evening and I was not able to get past the 3 beeps nor find anything about them on the manual that came with the board. I scurried around and found the sales slips and called the seller, and they were not open so I called MSI tech support, and they were not open either, at least not until monday, and I need a new Motherboard if this one has failed, because I am moving to college this friday, and need to get in touch with MSI for replacing the board and possibly other components that may have gone with it.... but what is MSI's policy on replacements, and or warrranty?

You got this "error" after clearing the cmos? It is not an error, it is what happens after you clear the cmos. It is basically saying you cleared your motherboard settings and you need to go back and reset them. All you have to do at this message is press f1 and reset you bios settings. For now, I would recommend just setting the time and date and then loading default bios settings until you are sure you can fully boot. Then you can go back and change what you need. Good Luck and keep us posted.

KT333 Ultra ARU

Any chance that it will take a sempron?
Any one running one here?

Quote
Once he gets it running, outperform his rig, with a 2400.
Well he wants a Rig like mine but does know how to get it and will NOT listen to me even though I build all my rigs (even his)
I think the main Idea is that he wants to pick his own hardware. So ok he's right

KT333 Ultra ARU raid controller, help!!!!

I just bought a brand new 60 gig maxtor HD and I have no standard IDE slots left and was hopping that I could use the raid controller and setup the single drive as an array, and that I did fine, the onboard controller detected it and I ran the auto setup.... but when it boots to windows I cannot see the drive in windows explorer, and I have installed all of the latest drivers and 4 in 1 patch files. but cannot see the drive in windows... I am running windows ME, but the driver stated that it worked in ME, so any help would be appreciated....

Hi,
You need a modded BIOS to do this, see the good-article forum.
There you find an article from Maesus about this stuff.

MSI KT3 Ultra ARU 5.7 BIOS and SoudBlaster Cards - Audigy

I have flashed my BIOS to 5.7 Version and my sound card start to make a lot of noise (crackling) when play AC3 or DVD. If you dont want to use the new AMD CPU 333 FSB you dont need to flash the BIOS - I have Flashed to 5.6 again but, if you want to use a 333 FSB CPU you can flash the BIOS to version 5.7 and if have sound problems use the PCI latency patch for VIA chipsets.
VIA chipset MotherBoard owners who have through all of the above and still have sound problems with their Soundblaster cards, might want to look into the PCI latency patch for VIA chipsets - get it here:
http://www.georgebreese.com/net/software/
(scroll down the page there just a little to get to it).
There's also a similar page about resolving sound problems on Via chipset based computers here:
http://www.deinmeister.de/mvp3_zlt_e.htm
I hope this post help somebody
Mário Silva from Beja - Portugal
My System:
MSI KT3 Ultra ARU
Athlon 2400+
512 Kingston PC2700 DDR SDRAM
MSI Geforce4 Ti 4200
SoundBlaster Audigy
Windows xp Pro SP1
400W PSU
Creative Drx3
Pinnacle PCTV pro
HDD Maxtor 80 GB UDMA 133
DVD Pioneer slot in
RW Samsung 48x16x48
Creative WebCam Go
UPS 500 VA
Monitor Sony 19" E400E

Since my chip is an unlocked, I cannot easily run it at the default, but I can underclock it. At 100x6.0=600mhz, USB does not work, as well as 100x12.5. Same with 133x6.0 and 133x12.5. It appears to make no difference underclocking or overclocking.
I downloaded the right BIOS listed on MSI's KT3 Ultra-ARU page. I don't think the BIOSes are different anyway, since the same files, changelog, and etc are also listed for the Ultra-2 board.
A thing to note, that this is the onboard VIA-controller USB ports doing this. My Ultra-ARU's NEC-controller USB 2.0 ports work fine in both Win2k and Linux if I hook my mouse and keyboard up in those. This is not an ideal solution for me though.

MSI KT3 Ultra-Aru (KT333) and Duron Applebred??

Hi, welcome,willkommen,witajcie,dobry den, ... (I know this word in 11 languages)
I have MSI KT3 Ultra-Aru (KT333) and J want to buy AMD Duron 1800MHz(Applebred).
Does my motherboard support that processor?? It will work without problems??

Quote
Originally posted by osnavi
pk.master: It doesn't make any sense to discuss about the answer to your question. If MSI says your Mobo doesn't support that CPU and people who know what they say, agree with that, Why argue ? If you want, go and buy it, as at last you are the one to decide what to do.-
in msi website the 333 fsb cpus are not supported too in kt3 ultra-ultra aru but they still work... so it make sense to discuss if applebred work or not in those mobos.

KT3 Ultra-ARU not work with ATI 9600pro?

Hi,
I have recently(yesterday) bought an ATI 9600pro, to upgrade my old GF2pro. As the title says, I have the KT3 Ultra-ARU(MS-6380E)
There seems to be lockup problems that involve only certian games and the ATI DVD player. In all instances the lock ups happen when the mouse is moved. With respect to the ATI DVD player, it will lock if the mouse is moved over the video window.
I have tried a few things but nothing works, so I am posting here to try and see if someone knows something and I will contact ATI in a few hours, or maybe tomorrow.

For via chipset (kt333 based msi kt3 ultra-aru) i can now obtain full hardware acceleration and 100% stable for c&c generals game by:
1) download and install latest catalyst 3.7 driver/control panel/samartgart from ati.
2) disable fast-write in bios..
3) go to c:programsati technologyati control panel and execute smartgart
4) enable - pci read/write and agp read.
5) disable - agp write (default in my case was on causing the problem).
6) "apply", reboot, then "ok".

KT3 Ultra Aru xp2400?

Hi
I have been building my new PC for the last few month now it need 1 part a cpu. will the new AMD xp2400 be compaterble with my MSI KT3 Ultra Aru v1.0?
if not what is the highest cpu it will take
Thanks in Advance
Widowmaker
KT3 Ultra Aru
Coolermaster 200ATCS case
Gainward GeForce 4 4600 with firewire card
ocz 256 mb ddr400 (samsung)
Maxtor 133 40gb hdd x 2
DigiDoc5 (black)
Yamaha cd-rw (t@2)
thermaltake volcano 7+
AMD xp?????

I wish MSI would post something about the new Athlons XP's. I would think that they should have a few of the processors already. Every review sight seems to have thier hands on one. I did see in the bios updates that they posted a BIOS update for the KT3 Ultra-C on 8/26/02 that says it adds support for the XP 2400+
I have never seen this board anywhere though. I have seen other motherboard manufactures have BIOS updates for them already. This is my first time buying an MSI board and I hope that they get on the ball about this or it may be my last MSI board. I guess I won't start to worry to much until I can actually find a 2400 to buy, but it would be nice to here something from MSI. If my KT3 Ultra2-R won't support the new processors then I can buy a 2200+ now and end my wait.

MSI KT3 Ultra ARU -- After placing XP 2600+, motherboard dead

Like the thread title says, my KT3 Ultra ARU board doesn't work anymore :( (no video signal, all D-leds red).
This is what happend, I upgraded my XP 2000+ to 2600+.
Everything worked like a charm, until I removed the 2000+ CPU and changed it with the 2600+.
No video signal and all D-Leds are red.
When I changed it back to the old situation (2000+), the motherboard did the same :(
I changed hardware, but with no results whatsoever(videocard, mem etc.), And the BIOS recovery tool is (like always) not possible, because the system doesn't respond to anything and just hangs at a black screen.
The BIOS was upgraded to v5.6 (XP 2400+/2600+ Support) before the change. The cooling sits perfectly and the core of the CPUs are good (not broken or anything).
Are these signs of a dead motherboard? ;(

Quote
Originally posted by MikNT
IUpon clearing CMOS I found that I had to leave FASTCOMMAND at Normal since now I operate at 166 and it seems 166 and FAST or ULTRA do not go hand in hand. I have no idea why.
Hi! I got the same problem. With BIOS version 5.4 and 5.5 I could choose between normal, fast and ultra. Now with 5.6 it doesn't work at all (also tried with modified bios to have full raid functionality). So if you're running both FSB and memory @166mhz, you can't boot with ultra or fast (I haven't tried ultra, since fast always gives me the best perfomance).
Ah! And I can choose ultra or fast with FSB @ 133 and Mem @ 166.

MSI KT3 Ultra-ARU video lock-ups

Hello,
I have a 3 month old MSI KT3 Ultra-ARU. I am running Windows XP Professional and I am having a periodic lock-up where the screen will show blinking colored blocks and the system will freeze. Sometimes just hitting reset will cure the problem. Other times, hitting reset will create two vertical stripes of colored blocks scrolling down the screen. I have used the board on two entirely separate systems (One with AMD Athlon 2000+, Gainward GeForce 4200, 512 MB Samsung 2700 DDR, Western Digital Expert HD (tried both IDE #1 and RAID controller) (Other System, Athlon 1800+, a different Gainward Geforce 4200, 256 Crucial 2700 DDR, an older Maxtor hard drive). In either system, every once in a while, the system will freeze as described above (it has happened in Netscape 7.0, Microsoft Word 2000, America's Army game).
I have played around with the bios settings, reformatted hard drives, tried various revisions of the nvidia display drivers, swapped out video cards, etc. Any ideas? Do I have a bad board? Do I need to flash the BIOS? If the board is bad, what do I need to do to return it?
Thanks,
Matt Gumaer

The second system has a 330 watt enermax power supply. With the new system I put together, I put virtually the same board (MSI KT3 Ultra 2 with bluetooth and RAID), everything is the same as my first system (except the KT3 Ultra-ARU) and the stability is fine. So, I'm reasonably confident its not the power supply.

KT3 Ultra-ARU SB Live! problem when using onboard Promise MBFasttrak 1

Hello !
I have one little problem with my motherboard. I know it's a little bit older compared to today's MSI production.. I have a MSI KT3 Ultra-ARU motherboard. I used only VT8233A southbridge's IDE until now, and everything worked perfectly. But now, I bought two Maxtor 80GB disks and placed them to a onboard Promise MBFasttrak 133 Lite (PDC20276) RAID in stripping mode. Everything works, except Soundblaster Live!. The soundcard itself works normally, but when I start to copy some files (and have some MP3's or video's running) the audio gets distorted in rythm with data transfer. I checked IRQs or address spaces, but IDE is on another IRQ than any other device, the same is address space. Had anyone the same experience with this "problem" ? Please let me know...
My configuration:
MSI KT3 Ultra-ARU
AMD Athlon XP 1700+
256MB RAM DDR 333
2x Maxtor DiamondMax 9 80.0GB
nVIDIA GeForce4 Ti 4200
ATi TVWonder
RTL8029 ethernet card
SoundBlaster Live! 5.1
Teac CD-E540 cd-rom
Sony DRU-190A cd-rw

Hi,
I think you should install at least the VIA RPP patch (http://www.viaarena.com), maybe also the patch from http://www.georgebreese.com.
Hans

KT3 Ultra ARU Slow HD Transfer Rates

Hello,
First, please see my system information at the bottom of this message.
I have a MSI KT3 Ultra ARU motherboard and have installed a Maxtor ATA133 60GB hard drive with 2 MB cache. The hard drive is jumpered as Master and is connected all by itself on the IDE1 ribbon cable. On IDE2 I have a CDRW (Master) and a CD-ROM (Slave). My other hard drive (WD 120GB ATA100 8 MB cache) is on IDE3 and is set up in RAID 1+0 stripe.
I recently ran the Sandra file system benchmark on my hard drives with what I think are very discouraging results. My Maxtor drive on IDE1 scored 32 MB/s and my WD drive on IDE3 came in at 23 MB/s. Those are some stinky results aren’t they?
I checked my Device Manager under IDE ATA/ATAPI Controllers and it indicates that for my Primary IDE Channel the current transfer mode for device 0 is Ultra DMA Mode 6. I don’t know how to check the transfer mode on my IDE3 hard drive.
Question #1: Are my 32 MB/s and 23 MB/s results slow for my hardware?
Question #2: If these results are slow, how can I increase the transfer rates?
Please help!
Thank you!!!!
My System
AMD Athlon XP 3000+
MSI KT3 Ultra ARU MOBO
2 x 256MB DDR PC2700 SDRAM
ATI Radeon 9600XT 256MB
Western Digital WD1200JB 120GB Caviar HD ATA100 8MB Cache 1+0 Stripe/RAID0
Maxtor 6Y060L0 60GB HD ATA133
Pioneer DR-A04S CD-ROM 32X
Lite-On LTR-48125W 48x12x48 CDRW
TTGI TT-350SS (350W) Power Supply
PSU Ratings: +3.3V/28A +5V/35A +12V/16A
Windows XP Home SP2

These tranfer rates seem fine for sequential read rates. The maxtor drive is at mode 6 and the WD should be at mode 5 if its ATA100.

KT3 Ultra-ARU battle

Hello!
I have a Pentagram Dark 56I modem (Lucent win modem) installed on MSI KT3 Ultra-ARU. Everything is working now except my modem witch does not connect to the internet (only one out of fifty connections is successful). I haven’t got any idea what is wrong and what settings in bios are responsible for the work of internal PCI modem with MSI motherboard. The modem is 100% efficient (it worked fine during 13 months, latest driver, proper settings, checked on another computers), telephone line too. I tried all bioses 5.1, 5.3, 5.4, 5.6, all PCI slots, Windows 98, 98se, Me, 2000, XP pro, PCI latency patch, another mouse and keyboard. Now I am going to suicide ;( . Do you have any idea what else can be wrong (I disconnect every peripheries): broken motherboard, memory (1x256 DDR PC2100, checked in all slots) or my Athlon XP 1800+? ?(
Help me please!
MSI KT3 Ultra-ARU
Athlon XP 1800+ (TITAN cooler)
1x256 DDR PC2100
Leadtek Winfast 200TH
Maxtor 40GB ATA 133
Lucent Win Modem
TV card
Codegen 6016 300W PSU
LG DVD x16/48
CDRW LiteOn 48/12/48

Hi,
Disable the COM ports (If not using them) then try another modem.
Lee

Kt3 Ultra-aru Processor Speeds?

Hi There,
I'm running the MSI KT3 Ultra-ARU (MS-6380E v1.X) with an AMD Athlon XP 2000, I was just wondering what Athlon XP processor speeds this supports upto, and if possible what changes I might need to make to the Bios, Would I need to flash my board with a new Bios or just go into my Bios and change some settings.
Thanks for any help, just trying to get ready for Doom 3 and Halflife 2 if they ever appear
Cheers,
Paul.

But there is no guaranty, that a FSB333 AthlonXP will work. The largest CPU that is allowed from MSI is a 2600+ FSB266.
But the chance is pretty high, that a FSB333 Athlon will work, though. It did so on mine KT3 Ultra.
sj

KT333 Ultra-ARU + XP 2400+ ...

Similar Messages

Maybe you are looking for