KT4 (6395) burned my ti200 and doesnt work with the 9700

I bought a msi kt4 a week ago, formatted my hd, plugged in the new radeon 9700 and  there was no picture...and yes..I plugged the power for the 9700. Next I plugged in my g3 ti200 in order to wait for a new bios release that could fix the 9700 problem and the board burned my geforce....something I could smell in the whole room straight away.
I am an msi fan so I swapped  the kt4 for a kt3ultra2 which is working excellent but without the agp x8 which I believe is overrated anyway.
Be carefull with those kt4´s, my vendor tested the returned kt4  with a pci card and told me the voltage to the agp port was way too high...
well done MSI....you ruined a perfectly good g3
but on the other hand I love my new kt3ultra2 so I aint going to complain much, the one complaining is my best friend...I was going to give him the geforce.
PS: The 9700 works wonderfully well with the kt3ultra2.

Did you make a fresh OS install to make the ATI Radeon 9700 work?  I'm having problems with my system, I have the same motherboard and video card you have.  When I boot my computer up everything looks fine, I can see the Windows XP Pro logo.  After the logo I get a blank screen.  Could you tell me what procedure you followed to make it work?
Thanks in advanced!
Quote
Originally posted by Danielsan
I bought a msi kt4 a week ago, formatted my hd, plugged in the new radeon 9700 and  there was no picture...and yes..I plugged the power for the 9700. Next I plugged in my g3 ti200 in order to wait for a new bios release that could fix the 9700 problem and the board burned my geforce....something I could smell in the whole room straight away.
I am an msi fan so I swapped  the kt4 for a kt3ultra2 which is working excellent but without the agp x8 which I believe is overrated anyway.
Be carefull with those kt4´s, my vendor tested the returned kt4  with a pci card and told me the voltage to the agp port was way too high...
well done MSI....you ruined a perfectly good g3
but on the other hand I love my new kt3ultra2 so I aint going to complain much, the one complaining is my best friend...I was going to give him the geforce.
PS: The 9700 works wonderfully well with the kt3ultra2.

Similar Messages

  • Does tilt and rotate work with the Magic TrackPad?

    Does tilt and rotate work with the Magic TrackPad? I am a gamer. So this capability is very important.

    Basically, yes. But I think this also depends on the game's settings.

  • I pod doesnt' work with the camera connector and Canon EOS 20D!

    Eigentlich wollte ich gerne den I pod 60GB Video, 5. Generation erwerben, um Fotos auf meiner Reise per Camera Connector darauf abzusichern. Obwohl die Kompatibilität mit meiner Canon EOS 20D zuoberst bei der Apple Site bei der Benutzung des Camera Connectors aufgelistet ist, klappte der Fotoimport beim Ausprobieren in ZWEI Apple Stores mit fachkundiger Hilfe nicht.
    Darauf versuchte ich Hilfe von dem Apple Care Team per Telefon zu kriegen. Sie versuchten das Problem immer wieder an einem anderen Mitarbeiter weiterzureichen. Nach der fünften Verbindung ohne Hilfe hatte ich definitiv genug!
    Und nun poste ich hier in diesem Forum, weil ich auf der Support Site keine Mailadresse gefunden habe und hoffe, dass jemand Deutsch versteht und mir vielleicht helfen könnte!
    Ich bin treuer Apple User, hatte einen G4 und nun einen G5 & Apple Display, haben den sogenannten „Apple Care Protection“ Plan, kurz also ein treuer Apple-Kunde, aber werde trotzdem im Stich gelassen! Zudem ist die Werbung auf der Apple Site schlicht weg gelogen und irreführend, da auf dem neuen Ipod nicht einfach Fotos abgespeichert werden können und die Canon EOS 20 D, die laut der Apple Site kompatibel ist, schlicht weg nicht mit dem Camera Connector funktioniert!
    Meine Fragen: Bringt Apple ein Update auf den Markt, dass ich die Canon EOS 20 D an den Ipod 5. Generation per Camera Connector (wie geworben!) anschliessen und Fotos importieren kann?
    Weiss jemand eine Support Mailadresse, an die ich meine Fragen schreiben kann?
    Ich bin für eure Hilfe dankbar und erwarte nun auch von Apple fachkundige Hilfe (beziehungsweise eine Stellungsnahme ...).
    Mit freundlichen Grüssen
    G5 2Ghz   Mac OS X (10.3.9)  

    Please read:
    http://docs.info.apple.com/article.html?artnum=301052
    iPod Camera Connector: Supported Devices
    The iPod Camera Connector requires a Fifth Generation iPod, iPod photo (also known as iPod with color display) and a supported camera or media reader. Other iPods, including iPod mini, iPod nano, iPod (Click Wheel), and iPod shuffle, are not supported with the iPod Camera Connector.
    The iPod Camera Connector supports cameras with USB connectivity based on the following commonly used protocols:
    PTP
    Type 4 (or Normal)
    Mass Storage
    For the complete list of supported cameras and media readers, see this webpage.
    If you're using Mac OS X 10.3.x, you can use Image Capture to quickly verify what protocol your camera supports. To do this:
    Connect your camera.
    Open Image Capture.
    Click Options and then click Device Options.
    You can also check your camera's owner manual or the vendor's website to find out what protocols your camera supports. Also see "iPod Camera Connector: Choosing a photo importing protocol on a camera" for additional information.

  • Will my printer and scanner work with the new intel mac?

    My first post.. so I hope i am in the right place! (was in wrong place last attempt!)
    I want to buy the new intel...but I would like to know for sure if it will work with my scanner and printer.
    Printer is Epson Stylus Photo 2100 and the scanner is Microtek ScanMaker 4900.
    I have emailed both Epson and Microtek... phoned Epson.. and I still do not know the answer.
    The responses were
    "At this point in time with have been given no information on whether our printer drivers will work or not....".
    "Yes it will work with OSX 10.4"
    "As you know this new intel chip has just hit the market. This particular configuration is in the alpha stage of testing. As of now there has not been any reports or customer correspondence of any concerns."
    I have been scanning these posts and it seems that only the operating system is relevant? If anyone could help I would appreciate it. I am finally able to replace my old, old, well loved G4 but am worried I will make the wrong decision.

    Thanks all for the helpful comments. I am getting closer to going out and buying the intel. As for the Canon printer... its not really an option for me, since the Epson cost me more than the computer will! But I will keep it in mind for the future. And do you think this applies to digital cameras as well Tomzo? I have been considering buying my first digital.. and thought the pentax might be best, since it apparently can use the lenses from my film camera.
    Thanks again all..I will keep checking the apple site list and the web sites as suggested by you.
    Power Mac G4 (AGP graphics)   Mac OS X (10.4.4)  

  • Will any wireless keyboard and mouse work with the Macbook Air?

    I just need to know if my existing keyboard/mouse will work or if I need to purchase new.

    Any BlueTooth keyboard or mouse should work. I have a nifty Kensington BT keyboard that switches from my desktop to MBA to iPad with the flick of a single key and I have a BT Magic Mouse.

  • HT4106 I just bought the lightning to SD card camera reader and it worked with the photos but didn't find the videos  on the same SD card.

    The cable only imported the photos and doesn't read the videos. Am I not seeing something on my iPad mini?

    Do those videos follow the naming convention? To be seen all files must have the 8 character name, for example VID_4854.mp4
    If they don't follow the naming convention they won't be seen. They also need to be a format that the iPad will play.

  • Do Google Sharing and Ghostery work with the new version?

    All I want to know is whether the add ons I use are still good. Thanks

    -> Ghostery 2.6.0.1
    * https://addons.mozilla.org/en-US/firefox/addon/ghostery
    Check the Firefox Add-ons website for other add-ons
    * https://addons.mozilla.org/en-US/firefox/
    Check and tell if its working.

  • Will iPhone 4s parts work with the iPhone 4?

    I recently bought a factory unlocked iPhone 4. The volume buttons and the lock button don’t work. The battery is also very swollen and runs hot. At the moment, this phone is stuck in the recovery mode loop. I also have an iPhone 4s. It’s locked so it’s of no use to me. Can the iPhone 4s’ volume buttons, lock button and battery work with the iPhone 4? I do not live in a country with Apple stores. Both phones are out of warranty. Help is much appreciated

    I Have not seen or heard of such a keyboard. The iPad is not designed to accommodate a mouse, since there is no cursor to move as in traditional computer.

  • Safari icon has turned into the generic icon and doesnt work anymore

    Safari icon has turned into the generic icon and doesnt work anymore

    Reinstalling Mac OSX 10.5 (Archive and Install) may be the step.

  • MY IPHONE WAS WORKING NORMALLY SUDDENDLY IT TURNED OF AND DOESNT WORK ANY MORE!WHEN I PLUGED IT TO THE CHARGER GIVES THAT ITS IN THE RECOVERY MODE WHEN I REMOVE THE CHARGER IT TURNED OFF DIRECTLY SO WHAT I SHOULD DO PLZ HELP !

    MY IPHONE WAS WORKING NORMALLY SUDDENDLY IT TURNED OF AND DOESNT WORK ANY MORE!WHEN I PLUGED IT TO THE CHARGER GIVES THAT ITS IN THE RECOVERY MODE WHEN I REMOVE THE CHARGER IT TURNED OFF DIRECTLY SO WHAT I SHOULD DO PLZ HELP !

    Please turn off your caps lock.
    All caps indicates shouting, is considered rude and is difficult to read.  Many simply will not read such posts.
    Enter & Exit iPhone Recovery Mode

  • I want to resigne an annual engagement ? how to do ? it doesnt work with " more help"! turn turn turn turn over and over

    i want to resigne an annual engagement ? how to do ? it doesnt work with " more help"! turn turn turn turn over and over

    This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
    -start here https://forums.adobe.com/thread/1703848
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    --and two links which may provide more details, if the above links don't help you
    -http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  • My speaker has a x beside it and doesnt work, why?

    MY SPEAKER ICON HAS A X BESIDE IT AND DOESNT WORK, WHATS HAPPENED?

    Hi,
    I've got no idea about your machine and its OS. This is from HP:
       http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-47284-1&cc=us&lc=en&dlc=en&...
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I just got an IPad and it seems to be interfering with my Iphone.   Facetime doesnt work unless the other device is shut off.   apps aren't syned.  email doesn't some in quickly on the phone

    i just got an IPad and it seems to be interfering with my Iphone.   Facetime doesnt work unless the other device is shut off.   apps aren't syned.  email doesn't some in quickly on the phone

    The machine could be repaired by a company that does circuit board re-soldering, since it is possible a heat-flex solder break on the main board may have caused either the processor or graphics chips to lose connection and that could manifest itself in a few somewhat documented ways.
    There is an on-board RAM chip that may also have something to do with a kernel panic, if it no longer is functioning correctly; that is the non-removable one soldered on the board you never usually worry about.
    Companies such as powerbookmedic, wegenermedia, and others can take in portable macs of vintage or newer (contact them for details on what they do, and how they accept work orders) for repair and can fix most anything; and have a parts inventory. Modern repair workstations allow the equipped service company to fix complex issues and they do troubleshooting. Sometimes the cost is less than a replacement logic board.
    The links above may help isolate the general cause of a kernel panic. There are other articles in Support database including a deeper look into them.
    •Technical Note TN2063: Understanding & Debugging Kernel Panics
    https://developer.apple.com/library/mac/technotes/tn2063/_index.html
    •Resolving Kernel Panics - The X Lab:
    http://www.thexlab.com/faqs/kernelpanics.html
    •Troubleshooting Kernel Panics:
    http://www.thexlab.com/faqs/kernelpanics.html#Anchor-Troubleshooting-49575
    Usually the issue is caused by hardware, especially if there is an indication of machine failure in the crash log or other screen image text.
    A working last model MacBook (mid-2010) would be a better 'first mac' to have.
    Hopefully you can sort it out.
    If not, there likely are fair parts in it.
    Good luck & happy computing!

  • My 3rdG iPod Touch is frozen on the home screen and the volume and time works but the screen doesnt, what do I do?

    My 3rdG iPod Touch is frozen on the home screen and the volume and time works but the screen doesnt, what do I do?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • The screen of my iMac is black and doesnt work....Why and what to do?? helllpppp

    oKAY So I use my iMac everyday... and need this fix asap like everybody else that experience this problem I guess...
    One morning I just start my computer like usual and nothing happen to it during the night and I had use it without any trouble the day before..
    But this morning the screen stay black... Even If I tried to restart it to unplug and replug it... to restart the pma and put try with the restart install cd nothing seems to work... the strange part is that I can sometimes hear the starting process and if its on I can press play on my keyboard and hear my music and change song and control the volume... but nothing change my black non-working screen..
    I've read a lot on blogs trying every tricks but nothing seems to work...
    Anybody with the same problem found a solution except bringing it to a repair shop?!?!?!
    It's so annoying as my 1 year warranty just but just expired...
    Help!
    Thank you in advance for taking the time to read/ answer
    peace.
    Amelie

    Did you ever get this fixed? Im having the exact same problem.

Maybe you are looking for

  • Create a new page in Text Edit?

    I know Text Edit has limited functionality but I havent been able to find any tutorials or basic information on Text Edit and eventually I may get Pages or Word for Mac, but for right now, I dont really need anything fancy so I'm hoping Text Edit wil

  • RH8 hangs with 100% CPU when closing a topic. Resource Manager to blame?

    Please refer to the following thread for background information: http://forums.adobe.com/thread/734972?tstart=0 I'm re-listing this issue, as it has rasied its ugly head again, and I've no resolution this time. Summary: The original issue was that RH

  • Outerjoin query performance tuning

    Hi, I have two tables, tab1 (7 million records) and tab2 (50,000 records). Following query is taking more than 15 minutes to feth the result from the database. SELECT a.col11, a.col12, b.col11, b.col12 FROM tab1 a, tab2 b WHERE a.col1 = b.col1 (+) AN

  • How to Show All Packages, That are not required by any other package

    I need a way to see al the installed packages thar are not required by any other package Thanks in advance ...

  • Adding hyperlinks to iweb

    i have a basic iweb site with multiple photo pages. now i'm adding a blog and a movie page. so, the nav bar has each photo page listed (lots) and i'd rather have one link that says "photos" that goes to a separate photo site, then people could naviga