KT4 Doesn't Like More Than 100mhz

New KT4 - new XP2400 - new 512Mb PC2700. When changing the frequency to anything other the default of 100Mhz, the boot doesn't work and you have to reset the CMOS in order to boot. The cpu is defintely 2400 (says so on the chip), the ram is labelled PC2700. Any ideas please? Thanks

As far as i remember, XP2400's run at 133Mhz. Bringing the machine higher then 133 for those CPU's would be considered overclocking. Try setting it at 105, then 110, and then see if it can take 133. 133*2 is 266.

Similar Messages

Kodo doesn't like more than one EJB JAR

Hi,
If EJB JAR A has persistent class Apple and EJB JAR B has persistent class Orange, then A can't open
a PM because the registered class Orange can't be found, and B can't open a PM because the
registered class Apple can't be found.
This can't be right.
David Ezzio

David,
There is one rather roundabout way that you should be able to set WarnOnPersistentTypes in Kodo JDO 2.3.0.
Our configuration interface provides a DictionaryProperties dictionary configuration string. This string contains space-delimited key-value pairs that are set via reflection when a dictionary is created. So, if you set the DictionaryProperties configuration setting to 'WarnOnPersistentTypes=true', the right thing should happen.
Note that you may need to muck with the ra.xml file to let JBoss know that the DictionaryProperties setting exists.
-Patrick
David Ezzio wrote:
>
Hi Marc,
For some reason, this property doesn't seem to always take. Particulary, the schematool seems to
ignore it even when it is in the system kodo.properties. In the case of EJB's how is it supposed to
be set? I can't set it in the kodo-service.xml because of the JBoss issue with boolean properties.
David
Marc Prudhommeaux wrote:
David-
You need to have
com.solarmetric.kodo.impl.jdbc.WarnOnPersistentTypeFailure set to true
in order to run in an EJB container, otherwise Kodo tries to
validate all the persistent classes on startup (which will fail, since
EJB jars typically are loaded in a different ClassLoader than other EJB
jars in the same environment).
In article <[email protected]>, David Ezzio wrote:
Hi,
If EJB JAR A has persistent class Apple and EJB JAR B has persistent class Orange, then A can't open
a PM because the registered class Orange can't be found, and B can't open a PM because the
registered class Apple can't be found.
This can't be right.
David Ezzio--
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com
Kodo Java Data Objects Full featured JDO: eliminate the SQL from your code

I just got an iPod touch, it was fine with battery life before I added Apps but now the battery doesn't last more than a night, what should I do?

I just got an ipod touch from my sister yesterday which she has had since October. The battery life went for days with her but as soon as I started checking my email and adding apps the battery doesn't last more than a couple of hours. I deleted some apps but no change. I also kept my email logged in and my notifications turned on so I'm wondering if they are part of the problem. Please let me know what I should do. Thank you so much.

Yes, notifications are part of the problem. For more information look at at the previous posts on this problem. Yu can find some of those on the right hand side of this page under the heading: More Like This. I keep mine in airplane mode when asleep.

I bought a ipad mini online from the apple store. His battery doesn't last more than 6h. I return it back to them they send me a new one, but the problem is same. Battery doesn't last more than 5-6h!

I have purchased a iPad mini online from the Apple store. Since day one I had 2 issues with it. First is that the battery life doesn't last more than 5-6h active usage, and the second one is with the wi-fi. It works properly but after I leave it for a while in sleep mode and try to reuse it, it doesn't want to open a web page or app store or mail (anything connected with the internet search) but it shows that is properly connected with my home network. So I have to turn off the wi-fi connection and turn it on again so it start to work properly. After couple off days this becomed very annoying so I contacted the support via phone and they gave me instructions for return it and that I'll receive a new one without aditional fee. I get the second device in the predicted time but again I have the same issues with the wi-fi and battery life. I will be pleased if someone from the Apple expert team explaine to me what should I do, because I dont find it for normal what is happening. On the Apple official site under the specifications for iPad mini it says that the battery lasts for at least 10h and the wi-fi problem isn't mentioned anywhere. Thanks in advance.

This is a user to user forum. No one here is an employee or representative of Apple.
If you want someone from Apple to explain what you should do make an appointment at an Apple store if there is one near you and take your iPad there and talk to Apple. If no Apple store is close enough then call Apple to find out what your alternatives are. There is a Contact Info link at the bottom of every page in this forum.

I want a soundbar for my 6th generation nano but am having trouble finding a compatible device. I'd like more than a dock, ideally a soundbar with wireless subwoofer. I'll only use the soundbar for music, not TV home theater. Any suggestions?

I want a soundbar for my 6th generation nano but am having trouble finding a compatible device. I'd like more than a dock, ideally a soundbar with wireless subwoofer. I'll only use the soundbar for music, not TV home theater. Any suggestions? Thanks.

Google

I have Elements 10. It doesn't handle RAW. It also doesn't allow more than one Fine JPG to be downloaded at a time. Can this be fixed with a download, or am I stuck to upgrade to Elements 13?

I have Elements 10. It doesn't handle RAW. It also doesn't allow more than one Fine JPG to be downloaded at a time. Can this be fixed with a download, or am I stuck to upgrade to Elements 13?

philips69374220 a écrit:
I have Elements 10. It doesn't handle RAW.
Yes, it does.
FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
It can handle the raw files covered by the ACR 6.7 version.
For newer cameras, you can use the free Adobe DNGconverter to batch convert a folder into the DNG raw format that PSE10 can read and edit.
(see the link in the upper document)
Fine JPG to be downloaded at a time.
All versions of Elements can open many jpegs at the same time, and the organizer lets you import as many as you want?

When i try to use my ipod it looks like the brightness was turned wayyyyy down. Like more than normal. I cant see anything. How do i fix it?

When i try to use my ipod it looks like the brightness was turned wayyyyy down. Like more than normal. I cant see anything. How do i fix it?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How do you wiggle very fast ???? Like more than the frequency of 100 per second.

I want to make a video of a pen vibrating while moving and i thought of using wiggle expression but the frequency of 100 per second is very slow is there any way that i can wiggle very faster like more than the frequency of 100 per second???? please help

You're getting too wound up on the wiggly effect. It's not how real pen&paper sketching works, anyway. If at all, it would be much simpler to use a shape layer path, subdivide it with a zigzag modifier, then slap on a wiggle path modifier and finally reveal everything with a trim paths modifier. Otherwise you can also try this:
http://aescripts.com/bao-mask-brush/
Similar techniques using particle systems to draw paths and scatter the residual particles will of course also work. Again, don't get obsessed about that wiggly thing. And if you really must - a wiggle is just a combination of multiple sinus waves with different amplitudes, phases and frequencies Simply adding up multiple Math.sin(time*frequency)*amplitude+phase can give all sorts of patterns.
Mylenium

I have iPhone 4s and i switch find my iphone on ! my problem that i have kids who know my apple ID and they put it like more than 10 times and they block it. my iphone wouldn't open or format in right way. plz help

i have iPhone 4s and i switch find my iphone on ! my problem that i have kids who know my apple ID and they put it like more than 10 times and they block it. my iphone wouldn't open or format in right way. plz help

If your kids blocked the phone by repeatedly putting in the wrong password for the lock screen, follow this help article to unlock it again:
Forgot passcode or device disabled

OSS doesn't play more than 1 sound at the same time [SOLVED]

Hello,
I use OSS to replace ALSA, it used to work properly here. Today I noticed that I can't play more than one sound at the same time, something which I used to be able to do.
Also, ossxmix doesn't operate properly (I can't control the volume of a specific program).
Looks like a permissions issue, because /dev/dsp and /dev/oss are created as root and other users get Permission Denied.
Any ideas how to fix it? My sound card is an AC'97 onboard.
Thanks!
EDIT: Solved by pacman -R oss, rm -rf /usr/lib/oss then pacman -S oss. Seems to have worked.
Last edited by Renan Birck (2009-01-02 23:06:35)

Hello Angela,
Have you tried resetting the iPod yet to see if that makes a difference? To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
If that doesn't work, a restore of the iPod via iTunes may be in order.
B-rock

J2ME app doesn't open more than 2 internet connections

Hi,
I'm developing an application which has to access three web pages for which I use
(InputStream) Connector.openInputStream(URL);Two times everything works fine, but when the third method which opens a connection is called, in 9 out of 10 tries the call doesn't return.
If I exclude one of the first two connections the thrid one works, so it seems to me there is a general problem on opening more than 3 connections??
The phone I'm using is a Nokia 6110 Navigator and I'm developing under MIDP 2.0. Unfortunately I have no other phone to check whether it is a device related problem.
Anybody an idea what I can do about this problem?
Cheers Simon

How explicitly and thoroughly did you close the other connection(s)? The phone's library may be keeping a connection open in wait mode, so that any remaining data can be drained. You might try running in an emulator and doing a netstat (or equivalent) from a shell; watch to see when your connections really close, and see how that correlates to when the new connection does/doesn't succeed.

My phone doesn't last more than two hours before the battery is dead. Any one know how to make the battery last longer? College student in need of help!

I used to be able to go all day without charging my phone but now I have to charge it like every two hours and as a college student who also works. I go most of my day with a dead phone. Does anyone know how to make your battery last longer?

Eight Battery Saving settings for your iPhone and iPad | MacIssues
The Ultimate Guide to Solving iOS Battery Drain — Scotty Loveless

It takes like more than a day to copy folders of total 30gb from my external hard drive to my macbook pro. And same is to transfer from one destination to another within the macbook. i bought it on november 2012 it was fast then. don't know what happen?

i am having problem copying any files or folders from any external device or moving between folders within the macbook. its too slow and takes a load of time. as you can see above picture it makes all clear.
its not even old i just bought it on november 2012. it worked fine 2-3 weeks but now it not good. even apps take more time to open. it is getting too slow so soon. anyone with solutions ? please help me.

What kind of external device is it? USB 2 is the slowest port on the Mac, Firewire 800 and eSATA and Gigabit Ethernet are much faster, USB 3 and Thunderbolt are extremely fast.
Also, if the hard drive is almost full things can slow down.

I would like more than 10 recent items.

File > Open Recent Files> has 10 items in it, max. I would like to make this perhaps 20. Can't find a dialog in prefs.
Illustrator CS 4 Mac, OS 10.5. Is there any way to do this? (Can't upgrade this PPC machine to CS5.)

You can customise it by editing the AI Prefs file.
Inside the file, search for /maxRecentFiles 10 and change 10 to what you like.

Totals page doesn't come more than one time

I'm creating a tabular report with a summary columns.
When using the report wizard, the totals page comes only one time, if i want to update the summary columns, or recreate again, the totals page doesn't come.
How can i get the totals page again?

Summary columns is related to the Data wizard not to the report wizard,
So, if we use Ref Cursor query to create the Data Model we should create summary columns mannualy.

KT4 Doesn't Like More Than 100mhz

Similar Messages

Maybe you are looking for