KT4 - Errors, Beta BIOS ???

I am having the same problem as everyone else with the CRC and Corrupt file errors when using FSB 133.
Does the Beta BIOS work? Has anyone tried it and had any problems or improvement?
Razdyn ?(

If you know how to flash the BIOS, know what is a beta BIOS about (ie not supported, not warranted if you flashed wrong, only for testing and experiment purpose...), you may try out.

Similar Messages

[Z77A-G45 ThunderBolt] Official and Beta BIos [E7752IMS.Axx]

E7752IMS.A300
-- Update CPU Micro Code.
- Update onboard Realtek LAN PXE ROM.
- Improved PCI-E display card compatibility.
- Improved memory compatibility.
This is the full release bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<Intel Downloads / Management Engine>>
Please note that flashing this release occurs entirely at your own risk!

E7752IMS.A4 ===> E7752IMS.A52 [BETA BIOS]
   01.Fix WIN7 64 Bit UEFI OS S4 resume fail issue.
   02.Fix select BIOS Setup Discard Changes and Exit item after can't enter os issue.
   03.Add "Long Duration Power Limit","Short Duration Power Limit","Primary Plane Turbo Power Limit",
     "Secondary Plane Turbo Power Limit" range to 4096.
   04.Fix clear cmos after boot option priorities show error issue.
   05.Fixed build-in shell disappear issue when update FixedBootOrder13 module.
   06.Fix it will show error characters in Boot device priority after disable some boot options.
   07.Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
   08.Disable "Secure Boot"when "Windows 8 feature" set from "Enabled" to "Disabled"
     to patch some NV's graphics card capability issue.
   09.Fix some monitor hang B2 issue.
   10.Change French language error in the option "Load Overclocking Profile x".
11.Limit Snapshot to be triggled just one time while system with multiple USB keyboards plug.
   12.Improve OC memory(2600Mhz+) capability for Intel 7 series project.
   13.Fix can't detect LSI 9270-8i RAID card.
   14.Fix LSI 9270-8i RAID card can be detected in BIOS when Windows 8 feature enabled,
     but the option has display garbled.
   15.Fix GetVariable compatibility issue while enable Win 8 feature upon MahoBay codebase.
16.Patch some memory user mannule set tcl=12 can't boot when dram frequency>2600MHz.
   17.Update ME 8.1.40.1416.
   18.Modify the PCH Sata Aggressive LPM Support item default value.
   19.Update SMBIOS module ver 34.
This is the full release bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
http://www.msi.com/product/mb/Z77A-G45-Thunderbolt.html#/?div=Driver&os=Win8%2064
Please note that flashing this release occurs entirely at your own risk!

Z68A-GD80(G3) Can no longer read external hd dock after flashing beta bios

I flashed E7672IMS.J31 Beta Bios because I was on a very old bios that was not compatible with my GTX 970 card I just bought. Flashing the bios fixed my 970 compatibility but in the process made it so my 2 external hd docks no longer worked (at this time on windows 7). self powered usb harddrives still worked though. At this time my sata mode was IDE which I thought might have had to do with it since it doesnt have hotswap. I assumed it was an issue with some drivers I installed after flashing the beta bios and I was due for upgrading/reformatting anyways so I enabled AHCI and hot swap then did a clean install of windows 8.1. The external hard drives still don't read!! I've used multiple different hard drives and different usb ports including usb 2.0. The docks are usb 3.0 and I use them daily to edit photos from my work. Any ideas of things I could try?
My pc:
intel 2500k
16gb Corsair vengeance ram
MSI 970 GTX GPU
Corsair 750w power supply
Z68A-GD80(G3) motherboard
E7672IMS.J31 Beta Bios

Could the issue be that I didn't download the Intel Management Driver after installing the beta bios I flashed? Maybe I could try that first, which one from this list do I use with my pc setup?
thanks for the help!
Quote from: flobelix on 20-October-14, 00:38:02
Try going back to E7672IMS.J20 OFFICIAL. Use the recommended flashing method with provided archive only: https://forum-en.msi.com/index.php?topic=163870.msg1215101#msg1215101

K9N Platinum Beta Bios?

Can anyone tell me or show me if there is a new beta bios out for the K9N Platinum?
Right now I'm using beta 1.45 and it works great! Except...I just want something that will fix the stupid cpu temp reading!!!
Lemme know if you find anything.
thanks!

Quote from: natasha on 09-January-12, 03:00:18
What cpus does this bios support? Just curious if it will do a phenom 9750.
Please start your own new topic instead of bringing up one that's been dead for 5 years.
>> Please read and comply with the Forum Rules <<
>> Posting Guide <<
Edit: No the K9N Platinum does not support AM2+ CPUs of any kind with any BIOS.

Unstable with last beta bios on z77 Mpower

hi all,
I've just install the last beta bios, and i can't boot now with my last setting. pc was stable with it, now i've got problem.
I run now with automatic OC but can run my ram @ 2600MHZ.
In manual oc configuration, i can't run the base clock can't runing @ 102, pc reboot and reboot permanently, bios freeze....well very bad beta bios, so what i can do?
Thanks

Or the beta previous to that one.
>>Use the MSI HQ Forum USB flasher<<
>>Beta BIOSes<<
If the primary is unstable, try this method:
https://forum-en.msi.com/index.php?topic=160450.0

Why do i get an error from bios for my sata dvd recorder?

Hi!
I have updated my bois to the latest 1.70 version for my K9N Neo 1.0 motherboard and get an error from bios that the S.M.A.R.T drives dont work and that i cant be read from my Sata DVD recorder?
I have a samsung lightscribe 18X dvd recorder and it was no problem until i updated the bios. I have tryed to turn off s.m.a.r.t drives checkup but i still get the error.
What can i do to stop bios from the error? now i have turn my bios to "no errors" so i dont have to clickon F1 every time i start och restart my computer.
im using:
XP PRO 32Bit
AMD AM2 4200+
2048 MB Corsair 800Mhz Ram
2 x WD 250 GB Sata II 8 MB
1 x Samsung dvd lightscribe recorder
K9N Neo motherboard with 1.70 v Bios ( updated today)
//VargTass

Quote from: vargtass on 20-June-07, 22:51:54
Hard Disk : S.M.A.R.T Status BAD, Backup and Replace
//VargTass
Quote from: BOSSKILLER on 20-June-07, 19:39:17
so if you disable SMART & reported errors can your Sata DVD works normal?

Where can i find beta bios?

i have K7N2G-LISR and the v1.8 bios would not let my memory to run at CAS2 (it is rated CL2). my pretty sure that v1.0 allowed me, at least it seemed so in the bios. so, where do i go to download beta bios?

Quote
Originally posted by uglynerd
two Corsair XMS: CMX256A-2700C2
I take it will run at SPD. What are the timings? Did you reset the timings after flashing to new BIOS? CPU speed?
What is the least it will run?
Instead of a beta BIOS how about flashing backwards to a known BIOS that will let it run.

Where can I download a beta bios?

I have searched the web for hours and I cant seem to find a Beta bios for my 865G-PLS MB, I am looking for a bios that has fixed the X800 videocard problem and one that allows the CPU core voltage to be adjusted.
Thanks for the help.

Thanks Del and Danny, the only issue I have atm is the fact I bought a prescott =P, really though I installed an X800 Pro and I have problems with lock ups due to the X800 bios isue and I really dont want to use the 3.7 bios because I am unable to change the core voltage, thus I cant overclock and hit 3.7 Ghz anymore.
I am going to go ahead and use the 3.7 and see if it clears up the issue I am having and go from there, but going from 3.7Ghz back down to 3.4Ghz is gong to cause me great pain hehe.

RS482M4 TV-OUT problems / Better BIOS?

RS482M4-ILD is the board i have
Using on board Video /W the D-SUB connection.
What i have tried is the CD-Driver, MSI's, Latest Driver and now am using ATI's IPG 5.13 Driver.
However i can not use both TV-OUT and VGA at the same time, anyone have any idea for me?
Also does anyone know of a better BIOS for this board?
Beta or modified it doesnt matter, memory settings are VERY VERY poor, CAS only
And Voltage HTT options at all.
I am using my old RAM on this board, and would like to run it properly, its PC4000 / DDR 500
SO the goal is to run the RAM at a 1:1 ratio.
Dont plan on overclocking so i would be lowering the multiplier (currently the only option i have) to keep the CPU at around stock speed
I will also probly lower the Vcore on this CPU to keep heat low as its in a SFF case.
CPU is a 3200+ that did 2.7GHz in its day

This is a cross-post from another thread discussing the same problem.
It is not documented anywhere in the MSI manual, but the problem is the VGA and TV Out video ports share the same RAMDAC (video channel) and cannot both be active at the same time. Or if they can (I have a discrete ATI card that allows this), it is not yet supported in the driver.
Thus, the only way you can get TV Out with the VGA port in use is to use *only* TV Out. You can do this in Catalyst Control Center by dragging the image of the TV or HDTV in the "Displays connected but not in use" list to the "Main Monitor" (CRT) above the list and selecting the only available option, "Swap". This will enable TV Out and disable your CRT. Do the reverse to re-enable the CRT & disable the TV Out. You can I'm sure assign these two configurations to hotkeys (I usually use Ctrl-Alt-F1 for normal, & Ctrl-Alt-F2 for TV Out).
I assume with a DVI monitor plugged in that both the digital flat panel and TV Out could be active at the same time, but I haven't tested this. I will get a chance to in the coming week though.
If you have an LCD flat panel with both VGA and DVI plugs, try using a DVI cable instead to enable dual displays. If you don't have one already order from ComputerCableStore.com, which I have found the cheapest anywhere (DVI cables start at under $14 before shipping; the local big box stores sell them for $40-$130(!) in comparison).
Otherwise, you may have to buy a new DVI-capable LCD monitor to enable this functionality. If you do pay attention to what comes in the box - I just bought a Samsung 19" display for around $300 and it didn't include a DVI cable in the box. It may or may not make sense to order the cable separately depending on the price difference for models that do or do not include a cable. If you are not sure if a cable is included with a particular model, see if it is listed on NewEgg.com - their product pages are the best on the web and usually include pictures of the contents of boxes, as well as links directly to the manufacturer's product page which often list detailed specs.

MSI 880GMA-35 FX [MS-7641 rev 2.1] - BETA BIOS Request

Hi, there beta bios for this motherboard?

I asked in this section to check for new updates in development. Since I bought this card in bundle with a processor AMD PHENOM X II, I'm having a series of problems:
- Lack of recognition of the AMD Phenom II x 960T BE (it was declared like supported but i must upgrade bios and clear cmos twice to recognize it successfully)
- Incompatibility with Samsung Hard Disk 502HJ (i found a incompatibility between SB850 and this HDD that i fix with a firmware update)
- problem with the Crucial M4 SSD (installation in AHCI mode only)
- Not being able to individually set the mode of access to individual devices (ide or ahci)
and look forward to some improvement:
- Unlock function on the core (which is not handled of software UNLOCK CAP as promised on the website of the motherboard where says "This new MSI software tool allows users to unlock CPU cores from Windows with just a few simple clicks, no need to enter the BIOS." )
I hope Msi coul emprove some function in next release and provide the software MSI's UNLOCKCAP with this motherboard.
(it's the same chip 880)

P7N Beta bios 1.1B4..closing in on 500mhz FSB

Played around with the beta bios tonight..using a 6X multiplier..got 487mhz fsb out of it..I'm pretty sure 500+ is out there, but my ram is dragging me down..lol. Had .125v cpu, 1.4v NB and 2.0 SB all others auto to get to this point.
http://valid.x86-secret.com/show_oc.php?id=325249
Paul

Proxyma,
I have no idea of the NB temp? MSI uses a temp sensor "near the middle of the motherboard". System temp is typically 28-30C idle and 32-33C under load. I dont think my NB ever gets too hot because it's watercooled along with the CPU. The highest temp I've ever seen logged for the CPU was around 48C (during a Crysis benchmark run at max settings).
Paul

K7D Master beta bios

I have been looking around the MSI site for over an hour for a beta bios I was told about. I am looking for the K7D Master (6501) beta bios. I was told it was 2.10 or something close to that. Someone please tell me where MSI hides this stuff at before I lose my mind.

Chris: Thanks for the link to that bios, I didnt know they had a 2.x out. It is dated the same as that 1.9 which I installed. My system has two of the mobile 2500+ chips. The 1.9 bios does not support the mobile and I use that CrystalCPU multiplier to change the speed from 800 to 2000. It is flakey and at the exact time it is supposed to switch to 2000 occassionally (1 out of 10 or so) I see a blue screen. I was wondering if that 2.x bios has support for mobile amd chips. All I see is that support was added for sempron. Not sure that that does on a dual processor board. So sempron can work on dualies?

1.9 beta bios

i don't know if im blind or just stupid.. i've searched the whole forum and can't find a link to download 1.9 beta bios for 875P Neo boards...
anyone who has a mirror for 'em?

If you need the flasher program plus the beta BIOS file, get it at
6758v196.zip
There's also feedback/comments about 1.9b6 in this thread:
BIOS v1.96.. Any idea about it?

Dowloaded audio online, but when i went to open it said error specify bios in settings , help!

sometimes when i download movies or audio from my phone itl lsay ' error loading bios must be specified in settings', what am i supposed to do to specify it

Droid 2,, it was acouple online movie sites, ,dont remember exactly which sites.. the thing is sometimes it says that and sometimes it doesnt

Z87 G43 Gaming Latest beta bios

Does the latest beta bios have haswell refresh support like the latest official bios A4 ?

Nope, I just screwed up. Removed the duplicate

KT4 - Errors, Beta BIOS ???

Similar Messages

Maybe you are looking for