Kt4 sound problems after upg bios 1.3

Using onboard sound, 6590 kt4 pro mainboard.
No problems at all with _sound_ with 1.1 and 1.2, but had other, stability issues with these.
Now sound, all sound, from time to time sound like the computer is a battery-driven tape-recorder with _very low_  batteries. It dishappears after reboot. It is there with all sound drivers. System is unstable with sound driver 5.12.01.0639 but stable with 5.12.1.643, except for the sound issues that occur with all drivers I have tried.
My system is winXp with all updates, one 3com networking card, amd xp 1600+ and 256MB DDR. 360w powersupply, one cd-burner and one cdrom. 2 IDE HDD.

yeah.. i got the KT4V and I have the exact same problem.. one would guess its a PSU problem, but my comp isnt workin hard either when these "crappy tape-recorder" effects kick in.. did you try with another soundcard?

Similar Messages

  • Problems after upgrade bios to v4.3 - P67A-GD65

    Hi to everybody,
    I was having a problems after upgrade bios to v4.3 of my mainboard P67A-GD65.
    After upgraded bios version (FW) its interface was changed and seemed better. also some specifiactions upgraded that i am now able to follow information of bios in my windows. with Control Center.
    1) first of all after bios upgrade XMP memory section can only be enable şf ş choose OC geniue on. but with this my cpu warm till 98C degree. because i have only stock cpu cooler of intel.
    in normal mode xmp can not be activated so that my memory that corsair vengeance dd3 1600mhz works at 1333mhz only.
    Also there was information about what is new in this version of bios fw as:
    - Enhanced PCI-E display card performance.
    - Improved memory compatibility.
    2) second problem that i have i wanted to turn cpu leds which were located above cpu slot blue leds. once i turn them off and it is ok. but when shutdown computer and restart it turn on itself.
    so may be there have benn occured a problem that mb can not save edited settings correctly?
    3) For last i could not find Winki 3 OS/linuz anywhere is there a link to it to integrate to my mb?
    Thanks for your replies from now on.
    Greetings.

    Quote from: momosala on 02-April-13, 17:54:22
    I think you had better to flash back to beta 4.39 bios, here : https://forum-en.msi.com/index.php?topic=164135.msg1214789#msg1214789
    And use and install on USB key MSI Forum HQ USB flashing tool from here : https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577
    Flash using method 1.
    And tell us if that works.
    thank you for reply that fast i will try asap and tell here.
    Btw, have you ever face a problem as i wrote above?

  • Sound problems after export media in premiere pro cs6

    hello,
    i recently started usining premiere c6 and after exported my project to mpeg-dvd i noticed that sound quality is reasonably lost,  than exported sound  separatedly without video to wav and result was the same bad. The imported sound source was really good, recorded in studio- wav 24 bit 48000. Before i used cs3 and never had such a sound problem after export video.
    thank you very much,
    Poly

    It's difficult to speculate without hearing the original and the export.  Can you upload them?
    https://www.depositfiles.com/en/

  • Sound problems after iOS 4.2 upgrade

    Experiencing very poor sound quality after iOS 4.2 upgrade. Bad eq, left channel dropping out, sounds like heavy reverb. Exists with iPod and pandora apps. Tried adjusting eq in settings. Any one else having problems?

    Yep I just upgraded to new OS 4.2 on iPhone 4 and I get this static buzz sound when talking to people it's really annoying and sound quality is terrible. What happened? I went back to the shop and they said it's the upgrade and that there is an issue with it. They also said there is no point leaving the phone with them as they can't fix it that it's upto apple to release a patch for the problem. Can we get a fix for this soon before I damage my ears?

  • Pismo Sound Problems after Sleep in Tiger

    Hi all. New to the forums and returning to Macs after years of cursing Bill Gates. Picked up a Powerbook Pismo from a friend and have been having some fun with it, but I have one problem I can't solve. I replaced the hard drive (saved the old one) and installed Tiger and 1GB of memory on the machine. All seemed well until I noticed that the sound would not work sometimes after sleeping. The sound will usually return with a reboot, but sometimes I'll have to actually turn the machine off, and clear the PRAM to get the sound to come back. Sometimes, the volume and screen controls will both not work at all (pop up doesn't even appear when the keys are pressed), sometimes it's just that the sound doesn't work, but everything looks right on the screen. I've also had the sound and screen buttons not work only to have pop ups suddenly appear and the adjustments happen several minutes after I pressed the keys. So far I've tried:
    Clearing the PRAM
    Checked the Pram Battery (ok)
    Reinstalled Tiger (Still loses sound)
    Downgraded to 10.3 (problem persists, and seems worse)
    In system information on Tiger it says "there was an error when retrieving that information" when you click on the sound hardware.
    The machine is a 500mhz Pismo with a 48gig drive and 1 gig of Memory (133mhz, would that cause this sort of problem?)
    I have not tried going back to OS9 to see if the disappearing sound resolves as I don't currently have an OS9 disk.
    This sure seems like a software problem, but I'm starting to wonder. I really like this machine and want to get it to work! Help!

    Maxstang, welcome to Apple Discussions.
    Did you repair permissions after you installed Tiger? Have you updated Tiger to 10.4.11?
    Here's the Sound troubleshooting info in the Pismo Service Manual.
    No sound from speaker(s)
    1. Verify mute mode is not enabled (F6 on the keyboard).
    2. Check the volume setting in the Sound control panel.
    3. Verify no external speakers or headphones are plugged in.
    4. Reset PRAM.
    5. Make sure speaker cable is plugged into sound card.
    6. Replace sound card.
    7. Replace speakers (part of the top case).
    8. Replace I/O logic board
    Startup sound is heard, then no sound from speaker(s)
    1. Remove sound preferences from System Folder, reset PRAM,
    then restart.
    2. Perform clean installation of system software.
    Had the Pismo previously had OS X installed. There's a firmware update (Boot ROM version 4.1.8) that should be installed prior to installing OS X. However, when I got my Pismo with Tiger installed, the firmware was not updated (have since updated). However, I don't think this could be the cause of your problem, since I had no sound problems when the update was not installed.
    The PC133 RAM (which runs at 100MHz) should not be the problem. I have PC133 RAM in my Pismo.
    Since you replaced the HD, could you have disturbed the connection to the Sound Card. The Sound Card is located to the upper-right of the HD. Here's a helpful laptop site.
    Fix It Guides for Mac Laptops & Mini
    http://www.ifixit.com/Guide/
    The guides can be viewed on-line or you can download a PDF file.
     Cheers, Tom
    (='.'=)
    (")_(")

  • Sound Problem After Installing iOS 8.1

    Hello, after updating my iPad to iOS8.1 it started making weird noises, kind of the same ones you get while blocking it or getting a notification but with a little of a "robotic" twist. Restoring it seemed to had fix it until I tried to get the 8.1 again. I was just wondering if someone its having the same issue, and if so, whats the solution. Do you think that i'll be treated on the 8.2 version? I had the same problem with my iphone 4 once and couldnt get it sorted out.

    I successfully got my iPhone 6 messages sound by following Timothy Holt directions.
    Thanks Tim.
    Timothy HoltNov 25, 2014 9:11 AM Re: iPhone 6 does not ring or make any sound notifications after installing iOS 8.1
    Re: iPhone 6 does not ring or make any sound notifications after installing iOS 8.1in response to Jane1950
    What you have to do, and this appears to be essential after you update the OS, is to reboot your phone.
    1. Hold down the sleep/wake button and home button simultaneously.
    2. Let go when the Apple logo appears and the iPhone is booting up.

  • Sound problems after system upgrade

    I am having intermittent sound problems on my ipad2 after I upgraded to 6. When this occurs my volume control doesn't work. This problem occurs sometimes in the middle of playing a video.

    hhhmm, thanks for the answer,
    i reinstalled alsa-driver, run depmod -a & then try to load the modules & it doesn't work! i always get :
    Can't locate module snd-pcm-oss
    that happens with all the modules i try to load. & my modules are still in
    /lib/modules/2.4.24/kernel/sound
    is there a way i can load them from there or copy them somewhere else or i don't know what else. 
    thanks for the help though!
    Shemeta

  • HELP! Problem after updating BIOS of my Lenovo ideapad S10-3S

    I'm hoping somebody will help me out of this nightmare. Cause i'm searching and searching across the net for an answer for this the whole day and i didn't find any accurate solutions for this.
    Well to start, i just updated my laptop's BIOS two days ago because i just saw on lenovo's website that there is an update file for the BIOS and I rapidly DL it and installed as per instruction, it was running fine after that but i just noticed that the system start up and even shutdown takes centuries to finish. Then i turned it on sleep having the screen facedown to the keyboard, and noticeably the 4 indicator lights are still lighted up for approximately 5mins before the laptop totally turned to sleep mode. Then I turned it on at the evening and voila! It is not booting up to the log in screen, it just gives me a background wallpaper for the log in screen without the avatar box and password in put box. After the BIOS screen loads, it offers me two options:
    (1) Launch Startup Repair [recommended as it says]
    (2) Start windows normally
    I tried both but still having the same result. And one option that i tried is to reformat the laptop instead because onekey recovery is also not a dependable solution. But lo and behold!!! It also stuck into a part where it says "starting up the setup".
    I really don't know what to do now!!! Please Lenovo team help me! I'm kinda smash the screen here! Its just that BIOS update is the Major update in my laptop after 4yrs of purchase. Help!

    Hi buddy,
    This stop code means you are using a wrong SATA controller driver. For XP installation you have to integrate the SATA driver before you can install XP. There are a lot of threads about this problem here in forum.
    For Intel chipset you have to download Intel Storage Manager from official Toshiba website and follow the instructions here to reinstall Windows with correct SATA drivers:
    http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm
    Alternative follow the instructions posted by peterk_1. Setting IDE mode instead AHCI in BIOS will also help :)

  • Sound problems after upgrade to OS4

    Good morning,
    Anyone else who has sound problems while phoning after the upgrade to OS4? I have a 3Gs. Sound while phoning has been reduced to absolute minimum.

    Same here as well - I have an iPhone 3GS and noticed this morning, when connected to my in-car bluetooth phone system, if I am running a iOS4 application like TomTom which is multi-tasking in the background, the sound quality is crackly, however if I kill the TomTom apps from the task manager, after a few seconds, sound quality is fine.
    Starting up TomTom again, immediately reduces the sound qulaity back to crackling.
    Not sure if the iOS4 or TomTom to blame.
    If I used a the Speaker option, sound is fine. It appears that only bluetooth is affected.

  • Sound problems after upgrading to 7.1 and Pro

    I have recently upgraded to Quicktime Pro and installed the 7.1 update, to create Podcasts at work. The only problem is now that non of my quicktimes will play sound. I have checked all volume control sections and mutes etc, its definitely a problem with the software. Also once a movie plays through, or if I try and use the play controls, other than initially pressing play, the player crashes and have to go to task manager to close it properly. The same occurs when you try and close the program.
    I was going to uninstall and try again, but I was worried this might cause problems with the Quicktime Pro info.
    Anyone else had these problems or have any advice.
    pc amd 2.8   Windows 2000  

    I'm also having sound problems with Quicktime v7.1 Pro. If I play a .swf file in Quicktime, the video and audio play great. If I play an .avi file, the video plays but there is no sound. If I play a .mov created by Camtasia Studio using either the default compression or the H.264 compression format, the video plays but there is no sound. The graphic display indicates that the audio is present in all cases.
    Is there an issue with this new version of Quicktime Pro v7.1?

  • Problem after updating Bios. Now the leds only flash and computer rebbots after a few seconds.

    Hello.
    After upgrading bios on my Elitebook 8440P to ver F20 the computer starts and reboots contiunisly. aprox 5sek for a cycle.

    Hello.
    After upgrading bios on my Elitebook 8440P to ver F20 the computer starts and reboots contiunisly. aprox 5sek for a cycle.

  • Problem after Flashing BIOS on my B490

    I have Lenovo IdeaPad b490 I boughted yesterday.
    I just find the latest BIOS update for my Notebook.
    I have downloaded the latest BIOS update from This Page, but it just downgrade My BIOS version to an earlier version. Before I try to update, the version is 2013. But after update, It show the UEFI version of 2012.
    Can I revert The BIOS to the version of 2013?
    It also encounter the problem with my Switchable Graphics. The Device Manager told that Geforce GT 720M as my Graphics while I know that my Graphics is Geforce 705M. I also can't use my Nvidia GPU.
    Can anyone give me the latest BIOS? Thx..

    Quote from: Blazer on 22-July-05, 22:39:17
    thats what it sounds like ! contact msi and get a RMA # to return the board,as they can reflash the bios.  good luck
    How do I do that? It looks like MSIs site is clinically clean of any way to actually contact them...

  • Sound Problems After Installing Lion

    I see many are having issues with sound after installing Lion. I have sound and then will lose sound after closing and reopening. I have to restart to restore sound. This is getting old quick. Does anyone know a fix or if one is coming? Thanks!

    Not sure how much it helps, but here is my experience:
    I have found that after a while, midi-style sounds stop playing. Most obvious to me is the crinkle tune when throwing away trash, or the click when placing something into the trash. When these sounds stop playing, I can still set the volume (and the up/down volume sounds will play) but the midi tracks don't start playing.
    A while back I was hunting for a solution to this problem and rebooted and messed around, etc, etc. One person suggested changing the midi format since they knew there was a bug in the midi playback in Lion (a beta comment I think). So I used the Audio MIDI Setup application to change the Built-In Output format to 2ch-32bit float. For a while the sounds were back.
    Just now, I noticed that they had disappeared again, so I went back to Audio MIDI Setup and changed it back to 2ch-24bit Integer. All of a sudden, a stream of old sounds started playing - presumably everything that had not been correctly played for a while.
    Not sure if it will work again, but next time the sound vanishes, I will try to change the format again and report back what happens. My guess is that just changing the format will cause the queue to reset and play any old sounds. Then the sounds will work for a while until the bug is triggered again. Perhaps the workaround for now is to just keep flipping the Ouput MIDI format?

  • Sound problems after rendering

    Hi,
    Being that I have Premiere Pro 7.0, I am not too sure how  much help I will get, but i was hoping that someone here could still  help if all possible. Here is my problem. I thought I start practicing  developing video lessons for 3d software. These lessons would be created  using a screen captureing program, called camStudio. In my first  lesson, my first try doing the entire lesson as one video, I found out  that the video file size exceeded CamStudio's exporter file size  allowance when trying to save out to Microsoft DV 1 AVI file. I then  decided to split the lesson into 2, but final compose it as one video in  Premiere Pro 7.0. Since the lesson was broken up into 2 screen captured  videos, I thought it would make things easier if each screen captured  video was in its own simulation. So, in other words,  I have created 2  simulations in one project, and then I had nested both of them into the  3rd simulation. For example, simulation 1 was called lesson1 part a, and  simulation 2 was named lesson1 part b, and the third simulation was  called lesson1. Once I had everything setup, at first everything was  working fine, meaing I could see the video and hear the sound tracks.  However, after I choose to render the sequence using Microsoft DV11 AVI,  I do not get any sound, and yet I made sure that the exporter exports  both the video and audio. Furthermore, after rendering the project,  going back to Premiere Pro's project, and pressing play, I get the  error.... Disk Write Error: Verify drive connection, available disk  space and disk  access privileges
    However, when I go inside  simulation 1 or simulation 2, I still hear their sound tracks. One other  thing I have noticed is that I get the sound back in the project if I  move the orginal simulations into a new simulation. By doing that, I am  then able to recover the project,. but if I choose to render again, the  same process happens all over again.
    Does anyone Have  any ideas?
    My Specs
    Adobe Premiere Pro 7.0
    Windows  XP SP3
    CPU 3.0GHz processor
    RAM 512MB

    so are you saying that the problem could be comming from how I did my recording with CamStudio? Not to change the subject, but you see, I am kind of lost. My goal is to provide some free video lessons. I was thinking my final encoded videos will be in DivX or XVid. CamStudio does offer users to compress to thise types of format. Howeveer, due to owning a very cheap microphone, those kinds that sit on your desktop, is causing me to have the biggest problem, since there is a good amount of background hissing noise in my recordings. So, I have been using both CamStudio for the screen capturing and Audacity to do the voice recording. Then in Audacity, I try my best of tuning up the voice and removing the background hissing noise. Once that is finished, I then need some sort of video editing software that allows me to put the video and my voice recodring together as well as splicing areas of the lesson where I stutter or slurr my speach a bit, which can be easily fixed in Adobe Premire Pro. However,  my version of Premiere does not offer XVid or DivX encoding. I was thinking of using VirtualDub, but I really do not want to have 5 programs, just so that I can fix all of my problems, not to mention I have no $$$$ left. So is there a free better way?

  • Sound Problems after Flash 11.3 Update

    This reply is to the post by Ortho_Fan, number 28, which references a Firefox forum and "Firefox Hates New Update." This thread is specifically about problems that Flash 11.3 is causing with Firefox but the problem isn't with Firefox, it is with Flash Player 11.3. 
    I have no sound with Firefox, Chrome or Safari.  I do have sound with IE9 but some people do not.
    See these and probably other threads:
    No sound in flash
    http://forums.adobe.com/message/4483563?tstart=0
    Problem with sound after update
    http://forums.adobe.com/message/4483038

    I've branched this discussion into it's own thread, because the issue you're describing is different than the issue from the previous thread, which was related to a specific crash instance.  We'd like to keep the threads focused on particular issues to help both investigate and collate the information coming in, and to aid in discovery for people that are experiencing similar issues.  A single thread with a dozen issues is far less useful in either regard.
    For the sound issue you're experiencing, I would recommend that you follow the advice in the threads you've referenced above.
    Flash Player 11.3 included new sound enhancments to facilitate support for low-latency audio, to facilitate more repsonsive sound in complex Flash games.  While we try to test a wide array of hardware, and conduct months of beta testing, it's impossible to hit every device, OS, browser and driver combination.
    Please ensure that you have the lastet drivers installed for your sound card/chipset.  If the problem persists, please post details of your configuration to that forum thread so that we can track down that hardware/driver combo and investigate the problem. 
    As a workaround, you may wish to roll back to Flash Player 10.3, until a new version is available.  Flash Player 10.3 contains up-to-date security patches (we maintain one major version back for Enterprise), and will revert the sound change that is causing problems for you.
    http://www.adobe.com/support/flashplayer/downloads.html
    Thanks!

Maybe you are looking for