KT4 Ultra and new Serial ATA drive

Hi there
I've got a WinXP machine with a KT4 ultra, 2 regular IDE hard drives, a CD write and DVD (all working fine).
Yesterday I bought a Serial ATA DiamondMax Plus9 160Gb to use as a 3rd drive. I don't want it to use RAID, I just want it as an additional drive available to windows.
I fitted the drive last night, but when the BIOS runs through the drives at the start it didn't show up. I did however get the RAID utility come up on the screen, and by pressing Ctrl-F it allowed me to create a RAID array (which I didn't).
When I got into windows the drive couldn't be seen, running Maxblaster found a SCSI drive but thought it was 0 bytes capacity.
Can anyone tell me if what I want to do is even possible?
And if so, how do it do it?
Thanks in advance
Rich

Hi Sharp, thanks for the info.
I have the promise drivers installed, so there really shouldn't be a problem there.
Having scanned through a load of other messages on here, updating the BIOS has been recommended.
I was a bit wary of doing this as I have a history of messing up machines, what are other's experiences with upgrading the BIOS?
Thanks again
Rich

Similar Messages

Help restore disk image from firewire drive to new serial ata drive

Heres my situation I inherited a mac mini without the installation cd. I also have an imac with the oem installation disk. I made a disk image of the mac mini (10.4.11) with disk utility on to an attached firewire disk. I've ordered a new drive for the mac mini and want to lay down the 10.4.1 disk image and then upgrade to snow leopard. I boot with my OEM Disk (10.5) and go into disk utility and select the image for restore. It reports running time of 2 hours and shows progress but when I come back the cd seems to be thrashing and no matter how long I leave it it doesn't restore. What are my options here is it possible to use the 10.5 startup disk to restore an image file made by 10.4.11

Hi bgagew, and a warm welcome to the forums!
Cloning would be a far better way...
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
But...
1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
Once DU is up chose the Restore option to restore/copy the Disk Image to the HD.

Solid state drive vs a serial ATA drive?

What is the difference between a solid state drive and a Serial ATA drive in the MacBook Pro's? And why would I choose one over the other?

If your going to go SSD you need to go large as you can get, like 750GB or more and it's going to cost plenty.
SSD's are shock resistant as they have no moving parts, should last longer and cause less problems that hard drives, but they can wear out faster than hard drives if your moving around a lot of data.
Drawback to SSD's is you can't securely erase them, and with their "wear leveling" placing your data on the least used cells, you basically have to enable Filevault 2 to encrypt the whole thing all the time to protect your data, this results in a performance loss a bit as your CPU has to encrypt and decrypt everything on the fly before using it.
A skilled person can break the password, or you have to provide it to Apple for repair purposes or Customs officials/law when ordered by the courts. There are devices for iPhones, iPods, iPads and even GPS that can image the whole SSD in mere minutes and gleam the password, apparently in cooperation with these major companies like Apple. So it's safe to assume the newer SSD on the closed boxe MBP-Retina's will also be accessible this way via the Thunderbolt port.
So if you want the option to "scrub" your boot drive, then your going to want to go with a SATA hard drive and not a SSD. Also you want a MBP other than the MacBook Pro-Retina, so that you can open the machine and remove the internal storage for destruction.
How do I securely delete data from the machine?

Is it possible to upgrade from 500GB Serial ATA Drive @ 5400 rpm to ssd on the new 13" 2012 macbook pro?

is it possible to upgrade from 500GB Serial ATA Drive @ 5400 rpm to ssd on the new 13" 2012 macbook pro?

New non-retina 15" MBP, I just replaced the 500 gb HD with a Samsung 830 256 gb SSD from Amazon, $255 for the kit (includes a USB cable). Wow. What a difference. Yes, there was a learning curve for some of it, but was so worth it. Let me know if I can help. I'm using the 500 gb in 2 partitions - one for a clone of the SSD, and one for Time Machine.

Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily? The info seems to say that it's as easy as plugging the new drive into a drive slot?

I am about to buy a new MacBook Pro, but want to try out the Serial Drive 7200rpm before taking the plunge to use the SSD....Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily? The info seems to say that it's as easy as plugging the new drive into a drive slot?

shldr2thewheel wrote:
Fmaharg wrote:
I am about to buy a new MacBook Pro, but want to try out the Serial Drive 7200rpm before taking the plunge to use the SSD....Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily?
Yes
Fmaharg wrote:
The info seems to say that it's as easy as plugging the new drive into a drive slot?
It's easy, but not that easy. You need to copy all the info from the drive currently in the mac to the new one before you install the new SSD. You can do this by downloading cloning software (I use CarbonCopyCloner because it's free)
Not to be picky but CCC is donationware, if you use it because of its quality you should send a little bit of money in appreciation, and as a bonus you get to turn the banner off.

Does anyone know where I can buy a 750GB Serial ATA Drive @ 7200 rpm for the new mac mini??

There is a mac mini teardown for the new model at this site: http://www.ifixit.com/Teardown/Mac-Mini-Mid-2011-Teardown/6131/1. Here it says that the user can easily upgrade their own mac mini hard drive, but does any place sell a 750GB Serial ATA Drive @ 7200 rpm for mac mini that you know of???
Thanks in advance.

My source for hard drives has, for years, been newegg.com. They have good selection, good prices, and speedy delivery. Also, a broad selection of user comments. You can find their 2.5" laptop 750GB serial ATA 7200RPM drives at http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007605%2060003059 9%20600003340&IsNodeId=1&name=7200%20RPM

KT4 Ultra and FastTrak 376 issues.

I recently purchased a KT4 Ultra and installed it on me computer. Everythings fine, it boots and the bios recognises my IDE devices. It won't allow me to enter the bios though and it just sits there with the screen displaying this.
FastTrak 376 (tm) BIOS Version 1.00.0.18
(copyright info)
Scanning IDE drives
any help would be greatly appreciated
thx alot )

NEVER HAPPENED TO ME. TRY DISCONNECTING ALL IDE DEVICES, CLEAR THE CMOS AND PRESS DEL BEFORE THE PROMISE BIOS LOADS.
MAYBE YOU'LL GET INSIDE TO DEACTIVATE IT FROM LOADING AT INTEGRATED PERIPHERALS - ONBOARD PCI CONTROLLER - SEARIAL ATA CONTROLLER.
DO YOU HAVE AN SATA HDD? YOU COULD USE ONE FOR TRYING TO SETUP AN ARRAY IN THE PROMISE BIOS (BY PRESSING CTRL+F AND THEN CHOOSE THE AUTO CONFIGURATION). AFTER THAT MAYBE YOU CAN ENTER THE BIOS.
YOU CAN ALSO TRY TO FIND AN MODDED BIOS FOR THE KT4-ULTRA THAT DOES NOT LOAD THE PROMISE SATA BIOS BY DEFAULT.

Bad Serial ATA Drives?

I've got a Daul 2.5ghz G5 that's really had a lot of problems since I bought it. The graphics card has been replaced, the motherboard has been replaced, and both processors have been replaced.
The other day, I noticed that rendering in Final Cut Pro 5 was just crawling.
Processor intensive tasks seem to go fine, but tasks that involve writing to the disks (both of the 250 serial-ata drives) go very slowly.
Computer is, of course, out of warranty now.
I wipped the computer and started from scratch and reformated both drives, same problem. Disks are not fragmented.
I ran Xbench. All computer tests scored above the 100 point baseline, except the drive tests:
Disk Test 71.27
Sequential 104.09
Uncached Write 109.13 67.00 MB/sec [4K blocks]
Uncached Write 100.96 57.13 MB/sec [256K blocks]
Uncached Read 99.81 29.21 MB/sec [4K blocks]
Uncached Read 107.04 53.80 MB/sec [256K blocks]
Random 54.19
Uncached Write 20.81 2.20 MB/sec [4K blocks]
Uncached Write 131.48 42.09 MB/sec [256K blocks]
Uncached Read 93.06 0.66 MB/sec [4K blocks]
Uncached Read 134.96 25.04 MB/sec [256K blocks]
Both drives scored really low on the random uncached write speed. Any ideas on what the problem would be? Could both drives go bad at the same time? Hard drive controller? Is there a way to test it without buying a new drive?
Russ
Dual 2.5ghz G5 Mac OS X (10.4.3)

What make/model of drives? how old are they?
Hitachi 7K500 might fit the bill. Or 10K Raptor (but probably need SeriTek controller now, a must for the 150GB model and now the 74GB - both are excellent for boot drive). The 500GB 16MB cache Hitachi is also a solid drive.
Disk Utility: Erase: Options: Zero-all is what I would do first.
I try to keep one drive's outer track partition (100GB) just for OS / Apps (and use the 2nd parition for static archive and backups).
Then use Drive #2 for data / media / Users.
Maybe extra (external0 eSATA drives for FCP, scratch, backup and projects.
Some drives, SATA is going through a lot of changes, are trouble, not compatible, have SSC enabled, firmware doesn't support RAID as well as it could/should. NCQ being enabled doesn't help desktop use and isn't supported on G5 SATA ports.
Xbench is not the most 'reliable' test, but those are not normal numbers.
Keep your disk drive in "good health" (run Disk Utility, Disc Warrior etc from a cloned emergency drive regularly to do any repairs) as well as keep log and temp files to a minimum? run cron tasks at least weekly?

128gb SSD vs. 320gb serial ATA drive at 5400 rpm

I don't know much about hard drive space. I plan on purchasing a new MacBook for college, but I don't know what kind of hard drive space is better. Can someone explain what SSD is and what the serial ATA drive is. Any kind of help will be greatly appreciated.

SSD is a sold-state drive, i.e., the memory is of the kind you might find in a thumb drive or in the iPhone. The advantage is that it is not prone to the kind of failure that normal, spinning hard drives are. They are not eternal, however, and will die eventually anyway.
Traditional spinning HDs are more vulnerable to damage due to mishandling the computer, for example, and bearings occasionally wear out. But more space is much cheaper on a traditional drive.
For my money, I would buy the cheaper traditional drive, a backup drive, and the extended AppleCare. I think you'd still spend less than upgrading to the solid-state memory.

Adding a Serial ATA Drive from old windows machine?

Hi,
I have recently bought a new Mac Pro, to complete my conversion from Windows to Mac. However, in my old Windows machine, I have a 120GB Serial ATA hard drive.
I believe that I wouldn't be able to simply put this 120GB drive into my Mac Pro, as it is in NTFS format, which Mac cannot understand. I think that it has to be in FAT32 format, correct? So, if I was to re-format this serial ATA drive into FAT32, would it be able to work in my machine? Or are there more compatibility issues I might face? (Make, Model, Age issues?). I assume most SATA drives are similar, and that it should work, but I thought I should probably check before attempting it!
Thanks,
Steve

Any SATA drive can be installed in the Mac Pro. OS X can read an NTFS drive but it cannot write to it. However, if you just want to use the drive with OS X then you should repartition and reformat the drive for OS X:
Extended Hard Drive Preparation
1. Open Disk Utility in the Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button and set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.

Replacing a Serial ATA Drive with a SSD HD

Does anyone know if its difficult to replace a Serial ATA Drive with a SSD? And if possible and not difficult, which specs should this SSD have?

if you buy your SSD as a kit, it comes with sata to usb connector.
if you buy your SSD as a bare drive then go out and buy an usb external enclosure.
Before you install your new drive, turn your computer on with your old drive, hook up your new drive via external enclosure to your usb port.
Launch Disk Utility, erase/format your new drive with MAC OS Extended Journaled.
Open Carbon Copy ( free download if you don't have it) and start to clone your drive, a pop up will come up saying you haven't created a recovery partition, follow the instructions in Carbon Copy then proceed to clone your drive after.
Once that's done, open the back of your MB, take out the old drive, install your new ssd, then turn it on. You're back in business.
As for your old drive, put it in the external enclosure and use it as a back up drive.

1TB Serial ATA Drive + 256GB Solid State Drive

Hi,
How do I confuger my iMac if I select the "1TB Serial ATA Drive + 256GB Solid State Drive"?
Thanks.
Ed

Hi Ed,
Your new iMac will come with OSX Lion.
What you want to achieve is to have all your user accounts on the hard drive and your OS and Applications on the SSD.
The way to go about this is to create your User Account/s on the SSD. (Do not migrate your data at this point).
You will need to create a temporary User Account that you can login with, so that you can either replace or create the User Account that you want to migrate from your MacBook Pro.
Now, clone your SSD to the hard drive using Carbon Copy Cloner or SuperDuper!. (Migration Assistant will not migrate data to a HD without a System folder, I believe).
Bootup from the SSD, change the path to your User Account/s in System Preferences>Advanced Options. Reboot and then migrate your User Account, Applications and Settings from your MacBook Pro using Migration Assistant.
That is the configuration I have working on my MacBook Pro with dual drives, an SSD and HD.
Good luck.
Sam

Delete files from an External Serial ATA Drive

I have an external Serial ATA drive with a windows operating system connected to my macbook pro by a usb adapter. I'm trying to delete some files from the drive but it tells me it is read only. How do I change the sharing and permissions?

You can't write/make changes to an NTFS formatted drive using a Mac without third party software.
Search Google for "Mac NTFS"

750GB Serial ATA Drive @ 5400 rpm or 128GB Solid State Drive?

Ok so im probably going to get the MacBook Pro 15 inch non retina 2.6 GhZ. it comes with 750 GB Serial ATA Drive and im trying to see if it is worth upgrading to the SSD im going to be using it for a lot of video editing (Final Cut Pro/YouTube) as well as streaming videos and using it for class work give me your opinions on what you think would be best to get if im using it for this thanks! (also ahould i upgrade to 2.7 GhZ.??)

I agree with Bimmer 7 Series. I did the same SSD update of the 2.5" Hard Drive. i went from a 750GB 5400 RPM to a 512 GB SSD and used the 750 for additional storage (put in a chassis) and a 4x improvement on performance on the SSD vs. the typical HD.
Boot time went from 50seconds to 10 seconds.
Loading Parallels 7 load of Windows XP Pro was 1:33 minutes to 40 seconds.
Excel 2010 load time was 25 seconds, now 7 seconds
iMovie with 40 minute move added to edit/preview- 40 seconds, now 14 seconds.
These are just a few examples. I have the 2012 13 MBP (2.8Ghz 8GB RAM).

750gb serial ATA drive vs. 128gb SSD

Hey I'm looking to buy a 13 in. macbook pro and I don't know the difference between the 750gb serial ATA drive and the SSD. I know the SSD will make the computer operate faster, but that's pretty much it. Any information on these two would be greatly appreciated.

I was in the same position a month ago. Its basically a pro and con list.
SDD is much more expensive, to upgrade from a 500gb HDD to a 512GB SSD is $1000 dollars!!!
SDD is more energy efficient, so you will get about an extra half hour of battery life(on average). It is faster to load from, and it has no moving parts so is supposed to be have longer life.
I however went with a 750GB 7200rpm HDD as I didn't want to worry about running out of space. I use a lot of photos and videos and I didn't want to have to worry about bringing external hard drives around with me.
Right now I don't think the SSD is necessary for your average person. My 15" is flying with my HDD and I am very happy with my choice!
Hope this helps

KT4 Ultra and new Serial ATA drive

Similar Messages

Maybe you are looking for