KT4 Ultra-B BIOS Update problem

Well, I runned Live Update BIOS and found out that I didn't have the newest version. So i downloaded the newest (1.4), and followed the instruction for the installation. After it was installed, every thing seemed okay. Untill I started the PC, then I got an 'error' message:
CMOS Settings Wrong
Press F1 to Run SETUP
Press F2 to load default values and continue
I checked the CMOS Settings, nothing I could find was wrong. So everytime I start the PC I have to press F2, or else it won't start, it will just jump back to that message. This is not so much of a problem, but when I have to use the default values from now on it _IS_ a problem, because default FSB is 100MHz, and I loose alot of CPU. I now have AMD Athlon 1500+ 1,35GHz because of that BIOS update. What I really should have is AMD Athlon 2200+ 1,8GHz.
So anyone that could help me with this problem ??

There is a reason why it did not work.
When you buy a board and put a CPU in it, the board may not detect the CPU correctly,
So if your cpu was a 1470Mhz Athlon and the board detected it as 2.2Ghz what would happen?
The CPU would try to run at 2200Mhz and blow up
So manufacturers such as MSI set the CPU FSB to 100Mhz, must modern CPUs run at 166Mhz so by having it at 100Mhz you prevent the board from overclocking the CPU.
Do you see how that is a safety feature?
Now when you flash a BIOS you clear all your settings and the board gets reset to the safety defaults (100Mhz). This also happens when you clear the CMOS using the jumper, thats why it did not work
I assume someone else originally setup the motherboard and CPU settings for you?

Similar Messages

Sun Ultra 24 - BIOS Update problem

I have a Sun Ultra 24 where I attempted to update the BIOS to v1.5 using the Sun Tools CD v1.3. After successful install and validation of the BIOS, I am at a POST screen where I have the option to press F1 to load default values or F2 to run setup.
The problem is that my USB keyboards are not being recognized. I have tried all USB ports and two different USB keyboards. The system gives a beep, recognizing that the keyboards are being plugged in and out, and the Caps lock LED is lit for just a second, but after that it is not recognized.
The internal LED BIOS POST code is showing "85", indicating (from the Sun manual): 1. USB final initialization. 2. Switch screen back to text mode.
I have also attempted to remove and replace the BIOS battery.
Any other thoughts as to how I can recover my BIOS or get the system to recognize a USB keyboard? I do not have any PS2 ports on this system.
Thanks for any assistance.

I posted too soon, I was able to find another way to update the BIOS, and this worked. For some reason, my keyboard would not work earlier to enter the BIOS settings, but I was able to use Ctrl+Home to update the BIOS from my USB flash drive.
Here are the instructions from the Sun 820-2480-11 document:
Corrupted BIOS: System Does Not Perform POST
An interrupted or failed BIOS update, might result in a corrupted BIOS, which could
cause the system to fail POST and not boot. To resolve this, perform the following
BIOS recovery procedure:
1. Copy the file /BIOS/BIOSxxx.ROM from the Tools and Drivers DVD to the
root directory of a USB flash drive.
2. On the flash drive, rename the file BIOSxxx.ROM to AMIBOOT.ROM.
3. Insert USB flash drive into an available USB port on the workstation.
4. Power on the workstation, press and hold the Ctrl + Home keys, and watch the
USB flash drives access light.
5. When the flash drives access light starts to blink, release the keys.
6. Follow the onscreen instructions to recover system BIOS.
This procedure will be added to the Sun Ultra 24 Workstation Service Manual.

KT4 ultra new bios

When is MSI going to update its bios? still the buggy 1.4 bios is the latest. The bad CPU-mobo temperature readings must be fixed!!!

Hi:
It's still a mistery when MSI is going to post a new BIOS for KT4 Ultra.
They currently have a version that is still BETA, so if you're interested, yo can go at MSI support and they'll send it to you via e-mail. This version supposed to fix the same monitring problem but I see no difference between this version and verson 1.4.
Hope that helps.
Edyros!

KT4 Ultra (6590) need update of the Promise SATA RAID Controller PDC20376

The last Bios update AMI 1.4 for the KT4 Ultra (6590) have built in the bios version 1.00.0.18 for the PDC20376 (Promise 376).
I can configure 2 maxtor (6E040T0) sata1 in a raid0 array and it works under WinXP SP3,
but the 2 drives are working in UDMA5 according to the FastBuild Utility when the motherboard specifications talks about 150Mb (SATA1).
It's not an OS problem because the FastBuild Utility at Bios startup show the UDMA5 mode for HDD.
It's not a Maxtor 6E040T0 (SATA1) problem because have no jumper to set.
The Promise support center don't provide support for built in raid controller but the responce was that it's related to a known bios issue of the controller, so i have to update.
For the last Bios version for the S150 TX4 controller look at:
http://promise.com/support/download/download2_eng.asp?productId=108&category=all&os=100&go=GO
It's impossible to update the bios with the promise tool because the controller is integrated in the motherboard.
I read for example than on the motherboard K7N2 Delta-ILSR the bios version of the Promise 376 controller is 1.00.0.21:
https://forum-en.msi.com/index.php?topic=92756.msg665966#msg665966
I think the only solution is a modding bios, where i have to replace only the Promise controller bios but:
1) The tool amibcp.exe can't open the A6590VMS.140 AMI bios (renamed .rom), i don't know why!!!
2) What promise controller bios rom file is good?
Can anyone out there help . . . please ?

This is my results compared to my other UDMA6 HDD on IDE1, HDTach long bench stop with "Read Error" and only quick bench works.
The version of the Controller driver under WinXP-SP3 is 1.0.1.29 and I configured the driver in the PAM Utility with:
"Driver Write Cache" enabled and "Write Back" as cache settings (The 2 Maxtor SATA1 in RAID have 2MB of cache, but i don't know How many cache have the controller!!).
The Burst Speed is too strange!!! quick bench error?
I made it so your image is clickable.
-Frankenputer

KT4 Ultra FISR AGP Speed Problem

Hi all,
I've got a bit of a problem and was wondering if someone can help?
I have bought the KT4 Ultra FISR and am having a problem when trying to use it with my 8x AGP Nvidia ge Force 4 ti 4200 but the bois wont let me change the AGP speed to 8x, it insists that the highest it can go is 4x. ;(
I have run the newest 3DMark03 and it's showing that my AGP is only 2.0 and not the 3.0 that is meant to be with the board?
I was wondering if this is the problem?
I have double checked with the Graphics Card Manufacturer and they have confirmed that my card is an 8x card and I know that it was running at 8x on my last board.
I have done all of the Auto updates on the MSI motherbaord update utility but there's still no joy.
Any help would be greatly appreciated!!
- Ricky

Hi there
Well I have the Inno36 Ti 4200 8x AGP card:
http://www.ivmm.com/inno3d/geforce4/products_gf4_ti_agp8x_reviews.html
I know it's not the best card on the market but it should still be able to operate at it's advertised speed :P
A couple of the guys here at EA bought the card and theres are working fine on thier boards :(
I am not totally sure of the version number of my bios but does 1.3 ring a bell?
I wont be able to check the version till monday...
Like I said before.. I did notice that 3dmark03 noted that I was using agp 2.0, is that right?
- Ricky
P.s. Thankyou for taking the time to help me out Its much appreciated.

KT4 Ultra APCI power management problems

After I boot I must go into Win98 power management propertys and apply to get any power management functions to work. And then all I can get is monitor blank and hardrive power down. Unit will not go into suspend.
If I use the suspend feature in power down the unit will go into suspend (Susp to ram) but all the fans keep running. When I come out of suspend, the system becomes unstable and quirky.
Can anyone help me get this running the way it should.
Joel Gunn
Kt4 Ultra V 1.0 Bios V 1.4 - AMD 2100 XP
Win98 Se
Nanya 256M - 333 Ram X2
Ati Radeon 7500 AIW
Enemax EG 365P -VE
Two Maxtor 80Gig Ata 133, 7200 on a Promise TX2 Ultra 133 controller.
Aopen Modem
CD rom and CDR/RW

Hi,
Check whether all the supported patches are installed.
Regards,
Dharani
SlashSupport
A couple of weeks ago I installed quite a few of the
patches in the recommended list.
Since then, I get the following message repeated
continually in the console window:
DPMSSet: Invalid argument
Power management problems
I'm runnig solaris 8 on a ultra 5. I looked in the
power.config file and in the startup scripts, but
couldn't find any reference to "DPMSSet." Any ideas on
the cause and solution of the message?
I never use the powerd daemon, so killing the process
seems to eliminate the messages.
Thanks,
Gerhard Kuhn
[email protected]

MSI z77a GD80 PCI-e running at 8x and Bios update problem

Hi guys, first of all, sorry for my bad English, this is also my first topic, i recently bought a new PC, the spec is:
i7 3770k @4,3ghz
Corsair H80
MSI z77a GD80 bios 1.2
GTX 680 lightning
8gb ddr3 1600mhz cas9 G.Skill
1TB HDD WD Caviar Black
Asus xonar DX
The problem is, since the first bios, i can't run my PCI-E at 16x, i know when my card is idle the PCI-E goes to 1.1@4x , but when it's in use, it turns to PCI-E 3.0@8x , I'm also waiting for bios updates to check if it solves my problem, but when i try to download the new version 1.3, the download fails ( I'm trying to download with Live update 5 )m is there somebody that can help me solve this problem pls?
I've tried until now:
Replace the card into the first PCI-E slot again
Clear the PCI-E slot
Update to bios 1.1 and 1.2 ( 1.3 is not even downloading )
Set PCI Gen 3 from Auto to disable, and it keeps running with PCI-E 3.0@8x
Thx for any help !

Quote from: Froggy Gremlin on 18-November-12, 16:22:21
As per the manual, the VGA must be in the primary slot to run 16X. BIOS setting for graphics 3.0 should be set to Auto.
Do not use Live Update for BIOS updates. Too many borked boards are the result. Use the forum's USB method;
>> Forum Flash Method <<
Just curious. If I installed Add-on card that run at PCI-E 4X on 3rd slot (2nd slot is empty) what's configuration will apply ?

Bios update problem...

i have a lenovo 3000 N100 0768 AQ1...I don't know which bios it had...i tried to update it...i downloaded bios update utility from
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67008#install
and extracted it...after that i went to C:/> drive where it was extracted and double clicked a file name ...
"ADROMLDR.exe"....a window poped up i flashed the bios using a file "DL01108.WPH" in realtek folder...since then i have been faacing problems ...i dont have back up bios ...i formatted my laptop thinking it will get ok......
my pc still has the problem....if i use keyboard the usb get connected and disconnected frequently...and the audio is having problem too....if i start my pc with headphone plugged in..te speakers of laptop don't work..just the headphones....and if i restart with no headphone plugged in...speakers play but they play even when i plug in the headphone..i.e. both headphone and speakers work at same time........
please help me.....what should i do???

installed latest intel and sound drivers for your pc?

H8-1414 does not boot due to bios update problem

Hi, I did a BIOS update on my desktop last night , now it does not boot up and the motherboard send 8 long beeps with no video output. It seems that 8 beeps correspond to motherboard BIOS problem I was pressing ESC and F10 keys to enter Bios settings but no luck...always 8 beeps and no video. Need to access BIOS setting on the screen or do BIOS reset but don't know how to do it on this case. Any help ?...Thanks! HP ENVY H8-1414M3970CM MotherboardAMD FX-6120 , 8 GB RAMAMD RADEON HD7450 VIDEO

Hi buddy,
You should check the forum content or with other words, use the forum search firstly before you ask something. Failed BIOS update is not unusual and can happen always. The forum contains already a lot threads about this and the only solution is contacting an ASP. The guys have professional tools to recover it.
The same question was asked here:
http://forums.computers.toshiba-europe.com/forums//thread.jspa?threadID=53366

Thinkpad Yoga BIOS Update Problem after installing Windows 10

Hi all, I've been reading tonnes of threads here trying to solve my problems (which seem to keep getting worse) to no avail. I'm reaching out to anyone that can suggest some help before I end up bricking my yoga by accident or running it over on purpose. I'll give you a timeline of the events. The machine in question is a Lenovo Thinkpad Yoga 12.5" 20CD-0032USIntel Core i5 4200U 1.60GHz Processor4GB Ram128GB SSDWindows 8.1 64 Bit preloaded (recently upgraded to Windows 10) So the saga begun just a short two days ago. I had some spare time at home and decided to download and install my free upgrade to Windows 10. I backed up all of my important documents etc to OneDrive as I intended on performing a clean install. Said clean install went flawlessly with Windows 10 installing the first time with no issues or errors. Since I had performed a clean install, all my previous apps, including the stock Lenovo apps, had been deleted. I had anticipated this and only really desired to reinstall the app that automatically adjusts the screen orientation when folding the cover back. So in an effort to find this app and any Windows 10 related updates that may be available I went to support.lenovo.com and used the handy Lenovo Bridge app to automatically detect my hardware and suggest relevant updates. While combing through the suggested software I noticed a BIOS update that noted added support for Windows 10. How great, I thought, that Lenovo would have a BIOS update ready so quickly once 10 became ready for mass consumption. I went ahead and downloaded the exe version (not the bootable CD due to the lack of CD drive on the Yoga) and ran the BIOS update. As I ran the update the laptop was plugged in, and no errors were presented, a success message appeared and indicated a reboot was necessary, after a couple seconds the system rebooted itself. Enter nightmare level 1. As soon as the system rebooted, I fired up IE about to look for more updates and......BSOD stating that there was and issue with a driver, after another reboot BSOD again with a completely different file name stating driver file missing or corrupt. Sorry I didn't write any of the file names or errors down. At this point I'm thinking that something is not jiving here between the BIOS and OS. So I tried running repair, and recovery and each time I would end up with a BSOD of some design. It was at this point I made a USB with the Windows 10 x64 ISO from Microsoft in an attempt to run the repair utilities from the USB. Again to no avail. Enter nightmare level 2 After attempting multiple tries at recovering Windows 10 and getting multiple BSOD's through the process I decided to use my Windows 10 USB to simply reformat my hard drive to eliminate any traces of my now apparently corrupt OS and do a fresh install of Windows 10. This appears to have been a significant error on my part. Now I have no OS (BIOS is still intact so at least I think I have a not-bricked motherboard) and everytime I try to boot Windows 10, or 8.1 for that matter, from a brand new USB stick I get constant BSOD's.Sometimes I get as far as the Preparing installation files 22% but am interrupted by a BSOD error at some point. So I am pleading for some help here. To me it seems like the BIOS update was the issue. I was not smart enough to have checked the BIOS version before updating so that I would know what to roll back to safely. What would you all recommend for a rollback and how do I go about doing one with no OS on the machine. I know I'm asking for a tl;dr here but appreciate any advice offered. I really dont want to get to nightmare level 3, which I guess would be a bricked laptop and a bill for a new motherboard or laptop. The BIOS I currently have is GQET45WW (1.25) -Garrett

Thanks for the reply ColonelONeill, It turns out that Lenovo uses an obscure PERL disk image called "eltorito". As such the directions in the link you provided did not work as most common tools (WinZip, 7zip, and WinRAR) cannot extract the image file from an eltorito iso file. I instead just bucked up for a $50.00 Asus USB CD drive and burned the iso for version 1.25 and 1.24 onto discs. I then disabled the setting in the BIOS that prevents rolling back to a previous version and flashed to 1.24 from the disc. While this appeared to go successfully, as soon as I tried to boot from my Windows 8.1 CD I start receiving BSOD's again during installation. I then used the CD with 1.25 to go back to where I was in case it was simply a bad BIOS update at the time. Most of the BSOD's are driver related (qlfcoei.sys) which I don't understand since there is no OS other than what is on the bootable CD (or USB I've tried both) Is there anyone with a stable install of Win 8.1 x64 or 10 x64 running on a 20CD0032US that can tell me what version of BIOS they are running? My next step is to go back to a version that someone else can verify is working. Thanks again for any help.

Qosmio G30-162 - BIOS update problem

Hi, I have a problem with updating the BIOS on a Qosmio G30-162 which appears to be running the following version: -
Version 1.20
DMI Version 2.3
BIOS date 01/21/06
Every time I run the V3.90 update it says that it is not valid for this machine.
Does anyone know how to resolve this issue?
Many thanks
The BIOS update I am trying to run is V3.2.9 (P0038v390.exe)
When I run the files the update says that "This computer is not supported".
Many thanks

PauPau, many thanks for your help - absolutely spot on
Still not sure how that module was uninstalled as it was a factory install of XP MCE!
However, BIOS updated successfullky after download and install of Toshiba Common Module 6.04.00
Again, many thanks

BIOS Update problem, T15-j1000

Hi, i have a problem when i tried to upgrade mi BIOS with the sp6500.exe, but it crash, and my laptop doesnt start anymore. i Tried with a usb and the HP TOOLS and my laptop still dead....
I have a Chipmax 2 of EETOOLS, so i can reflash the w25q64fvsig chip whit the bios file (*.bin or *.fd) but the files i got from HP.com doesnt work (01961.bin and 01966.bin) , i think it must be encripted, decripted or assemble with some algorithm, because i have 2 pairs of files, (01961.bin & 01961.s12) and (01966.bin & 01966.s12)
The question is: how i get the *.bin for reflash the chip w25q64fvsig through these combination of files? Can any one solve this little problem?
I need just the instrucctions for assemble this file, and the problem is solved!
Thanks, and best regards!

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
Please see HP Notebook PCs - Restoring the BIOS, which states you may be able to create a "USB key with an HP_TOOLS volume" to flash the BIOS. Please see http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/How-to-use-the-HP-BIOS-update-uefi-utility/... for detailed step-by-step instructions that can be used to create the "USB key with an HP_TOOLS volume". You may be able to skip "Step 4". Assuming you have an HP ENVY 15t-j100, please see the HP ENVY 15t-j100 Quad Edition CTO Notebook PC Drivers page for the proper downloads needed for this procedure.
It doesn't appear that there are any BIOS updates for any of the 15t-j100 laptops... select, quad, ts, etc. This may be where your issue started.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

KT4 Ultra and Audigy 2 Problems

After install the CRC Error Bios I been have a probem w/ my sound card. I can now hear the cd-rom run , dvd load , and mouse scolling on my speakers. Also the creative program load painful slow now and the speaker test no longer work when I test the speakers out. The program and speakers were work fine before the CRC Error Bios. Do you know what it could be ?
System Config:
CPU: 2200+ XP
Motherboard: KT4 Ultra-SR
RAM Slot-1: Kingston 333 512 MB CL 2.5
RAM Slot-2: None
RAM Slot-3: None
display card: AIW Radeon 9700
IDE-1M: Western Digital 200 GB SE 8MB
IDE-1S: None
IDE-2M: Samsung 48x-16x-48x CD-R/RW SD-616Q
IDE-2S: Samsung 16X DVD SW-248B
IDE-3: None
SER-1: None
SER-2: None
PCI-1: None
PCI-2: ATI TV Wonder PCI
PCI-3: None
PCI-4: 3com EtherLink 10/100 PCI TX NIC 3c905B-TX
PCI-5: Creative Audigy 2
PCI-6: None
PSU: (Antec AMD Approved 350W)
BIOS revision: 1.3 Beta
Operating System: WIN XP
VIA 4-in-1 drivers : 4.45
other drivers, services or applications might affect the data transfer such as : None

I just reinstall the driver....
Now the system is crashing. The whole blue screen of death thing. Anytime I click on EAX console it give me an error or crash. What going on???

BIOS update problem with satellite C660

I have a satellite C660, and was sent a ' ''BIOS update C660 Version 1.80'', but when I try and install it this message comes up:
''THE PROGEAM WILL BE CLOSED
There is an erroroccured,please check the below items.
BIOS version above 180
Battery capacity more than 10%
AC is attached''
The AC is attached and there is also plenty of battery power, so what more can I do ?
Solved!
Go to Solution.

Hi Please post your full model number found on the bottom of your lap top. Does any one ever read any of the messages posted before posting a new message??
Dokie!!
IMHO if your not having a problem, you don't need to up date the BIOS. That is a very serious procedure and can end in a bricked PC if not done exactly right.
Dokie!!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture40.JPG ‏366 KB

Equium A60 BIOS Update Problem

Hiya All.
I wonder if this Community can help me?
I have been trying for ages (weeks) to try and flash my BIOS with an upgrade for my Toshiba Laptop. It is a Toshiba Equium A60.
I can get it to load Windows 98 (except that it tells me that the USB devices wont work because of conflicts in the BIOS)
My friend has exactly the same Laptop, and the BIOS Version is V1.9 and mine is V1.65 To me, this very simply means that mine is out of date!
I have downloaded the newest BIOS Version from Toshiba’s website, and they say to execute the .exe file by using 1.4 Floppy Drive. This I do not have !
You can also execute this file in Windows, except that in Windows 98 it tells me I have an error! “Failure_DLL DetecChipset”
I have Googled this, and the only website that has the same error code is in German! And although Google will let you translate it, it don’t tell me anything!
As a last resort, I thought I could burn a CD, make that into a bootable disk, and add the Toshiba file to it.
Tried this with BartsPE but this is based on Windows XP and I cannot load XP, it gets as far as the XP Logo, then freezes. This is why I suspect the BIOS requires an update.
So, after more Googling, I have finished up at this website, hoping to make a Boot Disk, with the Toshiba Flash Files attached, but it has to be done in “Windows 98” and not XP
So………… that is my problem, anyone have any ideas please?
My mail if you wanna suggest any fixes [email protected]

Hi Conrad
Can you please tell me why you made BIOS updates? Did you have any problems? I use my unit almost two years and I didnt make any BIOS update till now. If everything works well it is not necessary to make any update except for some Microsoft updates that make OS safer. Dont make any update if it is not necessary.
Anyway, I am very confused with your issue. Normally Recovery DVD must not be updated. BIOS updates are useful if there is some hardware conflict or problem and not problem using OS or any software.
It will be interesting to know why you make recovery procedure every time after BIOS update.

KT4 Ultra-B BIOS Update problem

Similar Messages

Maybe you are looking for