KT4 Ultra-BSR

   
Hi to everyone,
I'm lookin at getting the new MSI Ultra-BSR Mobo but I'm not sure about 2 things.
- First, does it support Raid on the regular IDE port for the HDD. I know it does on the S-ATA ones but for now, I've got 2 regular Parallel ATA HDs, and if it does'nt, can I get an adaptor to plug the IDE drives on the S-ATA connectors ???
- Second, I'm lookin also at putting a XP 2600+ on that board but I don't see anywhere if I can step system bus at 166 Mhz to drive the XP 2600 at 2.13 Ghz. I did see on one site that there would eventually but didn't have the jumpers yet !!!
Can anybody help me out with those 2 questions ???
Thanks a lot and hope to hear from you soon
Peter  

Quote
Originally posted by maesus
Hi,
Yes, KT4's Promise PDC20376 Serial ATA (2 channels, 1 device per channel) and 1 Parallel ATA RAID (1 channel, 2 devices per channel) controller does support the feature you mentioned. The Serial ATA ports are not RAID (correct me if I'm wrong)
KT4 is certified to support 166Mhz FSB Athlon XP 2600/2800. Don't worry about that.
Thanks you for your insight. I've been reading a lot the last two days and I'm not sure if I should give the VIA KT400 chipset a try yet. Seems it's not that great after all (speed wise at least) and that we should wait for the second release to come out (apparently soon).
What do you think about that ?
Appreciate your point of vues, thanks again
Pépé   )

Similar Messages

  • Raid & KT4 Ultra BSR

     ;( Can anyone save my sanity!
    Read all about updating PC,  thought easy, I can do that. During summer fitted extra memorey 512, fitted new hard drive, then an extra one for back ups, all well so far, then at Christmas bought KT4 Ultra BSR board & AMD 2400XP. Fitted ok no probs, great.
    So why can't I understand how the hell to get Raid to work. The guide is about as useful as a smack in the mouth. Can anyone point me in the right direction to get an easy to understand guide to which HDD connects where and what I do with the jumpers on each. Tried configuring  as Master and Slave on same cable to IDE 1 works Ok. Then tried same on IDE 3 only MAster shown and cannot configure raid. Please help before I trash it!

    hi,
    i had the same problem,
    i have pull the little white mini plug of the harddisk where you can put it on master/save/..........
    that restarted my compu and in to the set actived the raid / serial controller.
    than you niet to configure your harddisk ( push  ctrl-f)
    and than you use nr.1 (auto........).
    restart and normaly is the job al done.
    jupliner/belgium.
    mb: msi kt4 ultra bsr
    cpu xp 2200.
    256 mb/ddr/333mhz
    big tower
    geforce2
    western digital 80gb/7200(8mb cache)
    liteon 52x24x52
    16/48 dvd

  • KT4 Ultra-BSR - Drive problems?

    Yesterday I purchased a KT4 Ultra-BSR. I am doing a clean install.
    I have an Athlon XP200+, 2 x 512MB DDR Ram (PC2100).
    On IDE1 I have put 2 x 20GB Western Digital HDs.
    On IDE2 I have put a Pioneer DVR-A04 as Master, and a  100GB Western Digital HD as the Slave.
    On IDE3 I want a 30GB Western Digital HD as Master, and a 40x Liteon CD-R/W as Slave.
    I have installed Windows XP Pro (SP1) from new, and I have installed all of the drivers and utilities from the Drivers CD. My motherboard was shipped with BIOS Version 1.1
    When I boot into Windows, I do NOT see the CD-R/W at all.
    Also, the only way ro see the HD that's on IDE3 is when it's configured as an array (even though there's only one HD).
    I would have preferred to have two HD's on IDE3 but NOT with any form of RAID configuration - is there a way of doing this?
    Many thanks

    Quote
    Originally posted by Mastiff
    [QUOTE[size=15]Also dudes, how did you get the Bluetooth to work on the KT4 Ultra-BSR??!?  I'm desperate for help on this!![/SIZE]  
    I did it the simple way: Used Fujitsu-Siemens' Plugfree setup instead of the incredibly buggy MSI drivers. Then it worked perfectly with my PocketLoox and Ericsson T39. The hardware is the same. But still the range stinks (max 20 feet on my system), so I bought a full WLan setup instead.
    Here's the URL (I belive it says it's only for Fujitsu-Siemens' computers, but that's just standard manufacturer's bull.  8)
    Bluetoot-drivers
    And an explanation concerning pocket pc's and the installation:
    FirstLoox-forum
    [/QUOTE]
    You've misunderstood my problem.  I have the MSI KT4 Ultra-BSR motherboard which has a bluetooth module which needs to be connected to the motherboard, however, I don't know how to connect it (PHYSICALLY).
    Therefore I need someone with the same board to tell me how they did it.

  • Raid BIOS Gone (KT4 Ultra-BSR)

    I recently bought a Serial ATA Hard Drive wanting to install it on the raid controller.  But when I went to enter the Raid Controller's BIOS FastBuild Setup (at boot-time), it never shows up.
    I have the KT4 Ultra-BSR, and I can see the RAID Controller enable/disable option in the Integrated Peripherals.  I have it enabled, but it NEVER  displays the RAID bios at boot-up.  This is the second KT4 Ultra I've had and I know I saw the RAID bios on the first one I had. I have the latest system BIOS installed (1.30).
    Has anyone experienced this and/or know how to fix it? Is there a way for flash the RAID controller to possibly fix it?  Did the entry to the setup change from whats in the manual (ctrl-F4)?
    Any help is greatly appreciated. Thanks

    I've seen a couple other post like yours Shark. While that makes me feel a little more comfortable that other are having similar problems, I thinks mine's a little different.  I don't ever remember seeing the RAID BIOS on this motherboard.  I've tried turning it off and on in a row to see if mine would eventuall show, but I never see it.
    Does anyone from MSI read these? I think something should be done.

  • KT4-Ultra-BSR Video problem

    My PC was running fine. I have the KT4 Ultra BSR with XP2200+. I WAS running a TNT2/Riva 32MB GFX Card, and all was OK. I then bought a new graphics card - a 64MB Triplex Xabre-Pro (AGP 8X). I installed the card, but with it installed, the PC would not even attempt boot.
    I took the card out and put my old TNT back in, and the PC worked OK.
    I tried the jumper settings on the Triplex card, but it still failed to boot.
    NOW the PC won't boot - even with the TNT card in, BUT it will boot WITHOUT a gfx card (although it gives the customary beeps).
    What am I doing wrong here?

    OK, well it IS a 3.3V and 5V PSU.
    I have tried booting withou the NIC installed, and it made no odds.
    I have cleared the CMOS
    I didn't remove the TNT drivers, but I don't feel like that's the problem since the machine does not power up.
    I have tried a combined 300W 3.3V / 5V PSU that was in the machine before the gold PSU and it doesn't power on with that one in either.
    On BOTH PSU's the machine WILL boot without either of my 2 graphics cards in it, but will not boot with either of them (whereas it did at least boot with the TNT before)

  • MSI KT4 ULTRA BSR QUESTIONS

    I just bought new stuff for my computer
     kt4 Ultra bsr
     AOPEN Geforce ti4200 128mb DVI
     2200 XP CPU (IN A BOX)
     256 ddram 333mhz
    so i began rebuilding my computer,
    first thing i did was moving the CLEAR CMOS to the right position (by the manual) then it wouldn´t boot, no lights, no fan movement, so i found out later  on the internet that it was wrong, so i put the jumper in the other position as shown in the internet.
     But when i start up the computer now it only shows
    1500 XP 1350 mhz, should be 2200 xp - 1800mhz i think.
     but it won´t start with the fsb at 133 mhz. what can i do ????
    i have calculated the 5v * 30a + 3.3v * 14 = 196w (dont know what that mean hehe)
    i just dont know what´s wrong huff plz anyone help ?

    Hi,
    unable to run FSB at 133Mhz is either two problem or both:
    1. CPU Heatsink did not install properly, thermal grease applied wrongly
    2. Power supply does not have enough power
    Check both of them.
    Your power supply is very weak for today's system. Please consider an upgrade. But don't blindly go for the bigger numbers -- 450W, 550W, survey more to know about the quality of the power supply, especially the +3.3V and +5V rails, which both should supply similar amount of current, ie +3.3V @ 35A, +5V @ 36A for a good 400W. For more insurance, go for the well known brand. But usually they cost more.

  • Upgrade Kt4 Ultra to Kt4 Ultra-BSR

    Is it possible to upgrade a KT4 ULTRA to KT4 ULTRA-BSR so that il will have serila ATA?

    you can buy a highpoint sata add in raid card

  • KT4 Ultra-BSR Blue Screening

    Hi All
    I have a KT4 Ultra-BSR (MS-6590) that I bought way back in 2002. I haven't used it a hell of a lot, it was used intermittantly up to early last year, when it became my desktop baord, so it has seen a lot of use in the last year.
    It has started blue screening recently, at first maybe once a week, but now it's several times a day.
    I've replaced the PSU with a decent brand 700W one, even though the previous one was a decent brand 650W. This has not helped. I've stripped everything out, and ran it barebones, and this didn't make a difference. I then swapped the graphics card, memory and HDD (Leaving it barebones) and rebuilt the OS, and still no change.
    I've inspected the caps around the voltage regulator circuit, they seem to be OK, with no visible bulging or leaking, but absence of these symptoms are not proof positive that they aren't the dodgy ones. Has anyone else experienced similar problems with thses boards?

    Tell us what parts you have in the system.  Use the description of my systems as a guide to what we need to know.
    Run memtest86 on one stick of memory at a time to check your memory.  Run at least 5 passes on each stick and let us know the results.

  • Kt4-Ultra-BSR & Via 4in1 hyperion all version problem !!!

    PC :
    CPU : Amd Athlon 900 Mhz
    MB : Kt4 Ultra BSR
    VGA : MSI Geforce 2 Ti 64 MB DDR Pro VT
    HDD : IBM DTLA 307030
    RAM : KINGSTON 400 Mhz cl 2,5
    Problem : If I install Via hiperion drivers in all version my system cannot boot and on the screen are Black lines and Microsoft Windows XP logo in boot isnt full = Grafic problems. Can you help me please?

    I dont think so. Because i used this Mb with other VGA and Memory and same problem. But if i dont istall AGP Gart driver from this pack system working correctly. But i want to know whats is wrong. Can i have lower performance in games without AGP Gart driver?

  • Msi kt4 ultra bsr

    hi,
    i'm new at this forum.
    i have buy a msi kt4 ultra bsr board whit amd xp 2200 cpu.
    twinmoss pc 3200 memory @ 256mb.
    after install the hardware it seems to run only at xp 1500 in the bios.(amibios).
    normaly you can set the range on 100mhz or 133mhz.
    by this board we can set it only @100mhz and not at 133mhz.
    have olso tryed whit pc 2100 / pc 2700 @133mhz.
    still the same probleem,no 133mhz possible.
    when i put the memory in my msi kt7pro2-ru board it runs at 133mhz only the pc3200 can run on that board.
    is it possible that a little bug in the ami bios the problem is?
    have look at the msi website for a patch but nothing.
    have someone had the same problem.
    regards jupliner / belgyium

    hi,
    still the same problem
    today i have olso buyed the xp 2000+ cpu.
    put it in the bord and haved here olso the same problem.
    in the bios hey run at xp 1250 mhz and not xp2000.
    have buy olso a new psu it's now 450w.
    olso buyed new ram from apacer pc 2700.
    we have tryed everthing in the bios to put it on 133mhz.
    in the bios isn't not possible to set 100mhz to 133mhz.
    when we change the fsb clock higher than we need to reset the bios.
    in the dram timing control we can not set the 100mhz to 133mhz.
    the current host clock is 100mhz and not changeble.
    regards jup

  • KT4 Ultra-BSR multipler & CPU volts on XP2400 dont work!

    Well after several atempts and clearing the cmos several times the multipler dosnt work on XP2400 and when you go to change the cpu voltage from auto it comes up with strange symbols not a voltage to select! so iam stuck at 141fsb and CPU voltage set to auto i can change the FSB only except lower or to 141, why is it asus and epox can change the multipler and we cant on our MSI KT4 Ultra, iam disapointed and who wouldnt be after all others can change there multipler!
    any surgestions would be welcome and i think MSI should address this problem with a bios update and also look at the voltages for CPU as symbols mean nothing to me! ?(

    Quote
    Originally posted by MSIconvert
    Hi, well bluetooth lol, ok load bluetooth software from your instalation cd rom, dont load the mobile phone software as it causes trouble, then all i did was load the nokia pc suit that came with my nokia 7650, turned on blue tooth on my phone and then asked the phone to find bluetooth, problem it couldnt, but my pc found the phone, you have to make up a password and identify yourself over the blue tooth network, the software says it will conect auto, but it dosnt, you have to conect the 2 devices manuly every time, its faster than cable conection, but one problem i have found is that disconecting can cause problems, 1 out of 5 times when you disconect your pc loses the bluetooth conection and the only way it can find the hardware again is to unplug the arial device inside your case at the usb plug, reconect and it finds it again, a real pain i gota say, so much so i cant be botherd to use blue tooth anymore as iam fed up of takeing the side of my pc case off to get it to reconize the hardware again, but it does work when its all working and the usb finds the hardware, i hope this helps just a little but its not so easy to set up and the software isnt that easy either, maybe an update in the future will make it easyer to use.
    matt 8)
    Oops, I meant how did you connect the module to the motherboard??  I can't find anyway in which to connect it directly into the mobo, and I didn't get a cable with mine.  (I still haven't got to the software side of it yet - the hardware has been my prob for the past few weeks, no-one seems to be able to answer me).
    Hope you can tell me how to do it (pref with some pics or something coz I'm starting to think my retailer sent me the wrong board).
    Thanks!

  • Kt4 ultra bsr - raid

    hey guys  - i want to run my hd from the ide raid port but i am not sure how to load the drivers or get the port working!
    when i connect my drive to the port it says no drive found insert system boot disc
    please anyone explain what i need to do!

    Go in BIOS to Integrated Peripherals at Onboard PCI Controller, check and enable Serial ATA Controller. Reboot. You should see the prompt:
            " FastTrack 376 (tm) BIOS Version ...
            No array defined... ".
       Press there CTRL + F to enter the raid setup - select Auto Setup and press CTRL + Y to reboot. Then return tu BIOS (pressing Del) and select under  Advanced Bios Features the Boot Sequency and chose under 1st Boot device the device that look like BSR-TT400XC or something (cannot remember  :])
        Why Haven't you readed the manuals included with your mobo? Nope.

  • KT4 ULTRA BSR - Bluetooth software

    Hi!
    I'm running windows .net server 2003 RC2
    I've installed the drivers for the Bluetooth card, all was ok.
    But I can't install the bluetooth application  ;( (the one with "my bluetooth places" that works perfectly on WinME  :] )
    It gives me an error that the license is not valid on that operating system and it asks for a serial number.
    Hell, when I bought this board I've bought it to use it, not to use it only on the operating systems that were made when the board was released...

    You're running on a BETA OS, it's hard to justify whether the OS can or cannot support Bluetooth as you want it to be. The problem you described sounds like you're using an illegal OS...

  • KT4 Ultra BSR and IDE3

    Hi everyboby
    i would like to know how can i use ide3 as normal ide controller and what can i connect to it..(HDD CD-ROM CD RECORDER DVD RECORDER).
    Is possible to connect 2 peripherals for example HDD+CD-RECORDER)
    Thanks to all

    sigh...ok...i'll use only one hd....

  • KT4-Ultra-BSR XP2400 XP pro SP1?

    Hi just a quick question about XP pro service pack 1, has anyone experinced slower bench marks with SP1 installed as my 3D mark was 1000 less with SP1 installed, i dont understand why or is this a microsoft issue?
    matt

    try reinstalling drivers its known to do its own thing during the update

Maybe you are looking for

  • IPod Classic 80GB stops Synchronization after 2500 Songs

    I have got an iPod Classic 6th Gen with 80 GB and Software version 1.1.2. I use the newest iTunes version and Windows 7 x64. I recently resetted the iPod and wanted to sync my complete library to the iPod again. But now it always fails to finish the

  • Weird! Has this happened to Anyone's iPod?

    Please help. I just downloaded the new minigolf game and connected my iPod to the computer and loaded it with the game. I then connected my brothers iPod to the computer to add the game to his too. After that had loaded on his i left it connected and

  • Adobe Acrobat Pro XI vs X Accessibility Checks

    I have a Adobe Acrobat Pro XI. My client has Adobe Acrobat Pro X. In XI, my documents are completely accessible, but when they run the accessibility check in X they show errors. The client will send documents back to us as non-compliant due to these

  • What are the limitations of the 10 Client server License?

    I can't find any documentation on the limitations. (Searching Apple's support site is a bear....) I want to set up a web-server, and I think the 10 Client License is good enough to do that. But If I'm going to (somehow) be limited to 10 users at a ti

  • Streaming/Transmitting Internet Wirelessly To Tv?

    Hello all, Is it possible to transmitt and stream the Internet from your iPod Touch wirelessly to a tv via a small external box of some sort linked to your tv? Many thanks. W.